RICOH Pro VC60000 Enhancements. Nick Fiore Senior Manager, Product Marketing Continuous Feed Inkjet Technologies

Transcription

1 RICOH Pro VC60000 Enhancements Nick Fiore Senior Manager, Product Marketing Continuous Feed Inkjet Technologies

2 VC60000 July 2017 New Features Increase Ink Limits Settings Addressable Protector Coat Option Large Capacity UC Container Ink Monitor Maintain Sequential Order Engine 2 Bypass Mode Improve Scanning Functions New Speed & Resolution New Black Ink Dryer Enhancements (Later in 2017)

3 Print Quality and Media Flexibility VC60000 Addressable Segments Caution Journals, Magazines, Year Books, Photo Books, Packaging, General Commercial Print (e.g. calendars, posters), Luxury Books (e.g. travel guides, cookbooks), Annual Reports, Catalogs Commercial Print Brochures, DM Post Cards, Inserts, Collaterals, Coupon Books Education (K-12, Higher) Books, Course Packs, Newsletters, Fulfillment Kits, Self Mailers Direct Mail Sweet Spot Manuals, EOB, Compliance Notices, Trade Books, Newspaper Books Critical Communications, DM Letter Transactional

4 Ricoh CF IJ Family Vertical Market Positioning Journals, Magazines, Year Books, Photo Books, Packaging, General Commercial Print (e.g. calendars, posters), Luxury Books (e.g. travel guides, cookbooks), Annual Reports, Catalogs Commercial Print Manuals, Compliance Notices, Trade Books, Newspaper Books VC60000 Brochures, DM Post Cards, Inserts, Collaterals, Coupon Books Education (K-12, Higher) Books, Course Packs, Newsletters, Fulfillment Kits, Self Mailers Direct Mail VC40000 Critical Communications, DM Letter, EOB Transactional IP5000

5 Additional Ink Limit Choices Ink Limit Ink Limit is an important parameter to control total amount of CMYK inks. Without this control the ink amount exceeds the limit of paper and various PQ failure will occur. PQ Failure due to exceeded ink amount Cockling Paper gets wavy and the printheads hit and rub the image Bleed through Printed images bleed through to the other side of the paper Bleeding Colors are bleeding into each other resulting in Jagged edges Beading ink beads up into little balls resulting in non smooth image Lack of drying ink do not dry Offset wet ink transfers to rollers and other images Ink Limit defines the maximum amount of inks to avoid the above PQ defects. Different ink limit setting should be used depending on paper characteristics. VC60000 has the following Ink Limit setting as user selectable parameters. Current settings New settings Low (120%) Low (120%) - Medium low (160%) Medium (180%) Medium (180%) High (210%) Medium high (210%) None - High (240%) None

6 Additional Ink Limit Choices Added Ink Limit setting menus NEW Medium low (160%) High (240%) Current settings New settings Low (120%) Low (120%) - Medium low (160%) Medium (180%) Medium (180%) High (210%) Medium high (210%) None - High (240%) None

7 Addressable Protector Coat (PC) Option Conventional Protector Coat was applied on Entire sheet only. New function - application to only the Printed area Coat flushing area Coat printed areas only Coat mark area

8 1,267 Large Capacity Under Coater (UC) Container L L No changes to the main unit Field Upgradable

9 Large Capacity Under Coater (UC) Container Overview W770 x L770 x H1050 Guaranteed period: 730 days after production (Unopened) Guaranteed period once opened: 180 days Below is an information from product specification Transportation Temperature: From -30 to 40C degrees Humidity: From 5 to 85% RH Storage Temperature: From -30 to 32C degrees Humidity From 5 to 85%RH Storage period 730 days after production (Unopened) 180 days after opening

10 10 Large Capacity Under Coater (UC) Container GUI Under Coat Unit (Current normal cartridge) Under Coat Unit (Large UC Container) liquid of more than 25% liquid of less than 25% 1. With Large UC container, there is only one indicator to show remaining amount of fluid. 2. When remaining amount reaches less than 25% The UNLOCK button is shown on the screen, and operator can press this button to change the container.

11 Ink Monitor Ink Monitor enables the ability to monitor the amount of ink used for a job. Ink usage data is shown on the Job Information pod, (optionally) on the Job History table

12 Ink Monitor The ink monitor information is also stored within the job logs and is available from the printer using JMF Note: Ink monitor accuracy is dependent on the amount of feet printed

13 Maintain Sequential Order (FIFO) A new setting is added for ASCII (PDF/PS) print jobs called Maintain Sequential Order Current: jobs are printed as soon as they are received and preprocessed (smaller or easy jobs may print sooner) New: optional setting makes print order of jobs match the order of the jobs within the queue, regardless of how small or easy the jobs may be.

14 Engine 2 Bypass Mode (Duplex Configuration) Simplex 1. Operation for CMY Park Single-sided printing is available with Duplex system by neutralizing Printer2. Operation for CMYK Park - No Print - All heads capping Printer2 Y M C K In Print Printer1 Y M C K Operations of the CMYK Parking is performed by GUI. Previously only CMY parking was supported, but K of Printer2 is newly added for parking. NEW NEW Note: The K check box on Printer 1 is gray-out because K can never be parked.

15 Improve Scanning Function Calibration Current New Uniformity Alignment During uniformity calibration, a job can not be cancelled During alignment calibration, a job can not be cancelled During Uniformity or Alignment process, a job can be canceled by pushing the cancel button on the GUI

16 New Speed Range and Resolution Resolution Print Speed (m/min) Maximum Print Engine Resolution (dpi) Low 150*/120 max 120*/75 75*/50 50*/ x 600 Middle 100 max x 600 High 50 max x 1200 * 150 m/m required a valid license

17 17 New Black Ink In 2017, Ricoh will release a replacement for our Black ink for the VC Based on customer feedback and our own investigations we have made subtle changes to our Black ink formula that will provide a reduction in cleaning, saving time and cost. This new ink will be a direct replacement for your existing black ink. Thorough testing has been completed and proven, you will simply insert the new style ink when replenishment is required directly into the system. The older style and new style inks are completely compatible with one another and can coexist in the ink delivery system. Although we recommend using your older inks first to manage shelf life, should you come across an old style ink in your inventory, it can be inserted with no concern. Lastly, since the inks have the same core based materials and only subtle changes were made to the mixtures of the materials, you can expect the same high level of print quality you have come accustom to with the VC There will be no need to make any changes to how color is managed, settings used for your production work or overall workflow. We will work with you to manage your existing inventory and assist you in planning when the new version of the black ink is available for purchase. Current Version Flushing :Coated Line 32 Maintenance:Intense Enhanced Version Flushing : Coated Line 8 Maintenance : Normal

18

19