LUMELEX 2024 SERIES 120/277V LED XTM 19MM MOUNTING OPTIONS. Lighting Services Inc

Transcription

1 LUMELEX 202 SERIES 120/2V LED XTM 1MM Remote phosphor technology produces high quality, high output light with a consistent, even field for the most demanding applications of museum and retail accent lighting. Designed for the Xicato XTM 1mm LED module up to 2 Watts Extremely tight color consistency (less than 2 MacAdam Ellipses) System efficiency up to lumens/watt Backed by Xicato s Five Year Color Consistency and Lumen Maintenance Warranty 0,000 hour life to 0% lumen output, L0 at F max ambient Choice of color temperature Color Rendering Index (CRI) of either (high) or (standard) Color Fidelity (R f ) (high) or (standard) Gamut Area Index (R g ) (high) or 1 (standard) Choice of lumen outputs (delivered lumens) Tested to LM and LM0 Protocols, TM-0 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Field interchangeable optics (1-0 ) modify the beam spread distribution Optional accessory holder accepts up to two size-aa LSI filters and accessories (M size optics only) Integral dimmer available Finishes: LSI Black, White, and Silver Fixture weight: 2. lbs All modules are field replaceable MOUNTING OPTIONS Please review the ORDERING INFORMATION section on the next page on how to specify the following: Lumens/CRI/Wattage Color Temperature Optic - mm/beam spread LX202-XXXXX-XXXXXX-00-XXXXXX Lexan fitting for 1 and 2 circuit LSI track. With On/Off switch. LX202-XXXXX-XXXXXX-0E-EDXXXX Lexan fitting with integral dimmer (for use with ED dimming driver %). LX202-XXXXX-XXXXXX-LT-LTXXXX Lexan fitting with LumenTalk dimmer (for use with LT dimming driver (<1%). / LX202-XXXXX-XXXXXX-G-XXXXXX C-clamp for pipes from / to 2 O.D. With switch, -foot -wire grounding cord and NEMA -1P plug LX202-XXXXX-XXXXXX-A-XXXXXX Canopy for permanent mounting on standard octagonal junction boxes. 1/2 /1 LX202-XXXXX-XXXXXX-2G-XXXXXX Universal fitting for Unistrut Systems and any screw or bolt-up applications. With switch, -foot -wire grounding cord and NEMA -1P plug. / Other Options (Consult Factory): Stems, specify length ( ) Custom color, RAL palette Security/Worklite Fixture, use EF as mounting option (track mount only) 0/

2 / 1mm 1/2 12mm ORDERING INFORMATION Xicato XTM 1mm Fixture 11/1 1mm FOR 0mm REF / 111mm 1/ 1mm FOR 0mm REF 1. Choose the desired LED Module (T1) for XTM (1mm) 2. Choose the numeric code to designate the desired LED Rating LED Module/CRI/Wattage (-) for 00//11 (-) for 00//1 (1-) for 100//1 (1-) for 100//20 (20-) for 2000//2 (1-) for 100//2 (20-) for 2000//2 (2-) for 200//2 (2-) for 200//2. Choose the numeric code to designate the desired Color Temperature (2) for 200K (0) for 000K () for 00K (0) for 000K For other CCT, consult factory DIA mm. Use the following alpha-numeric code to designate the Optic (S1) for 0mm/1 (WR) for 0mm/20 (Field Reducer) (M2) for 0mm/20 (Narrow Field Angle) (M) for 0mm/20 (Wide Field Angle) (M) for 0mm/ (Narrow Field Angle) (M) for 0mm/0 (Wide Field Angle) (M) for 0mm/0 (L2) for mm/20 (J1) for 111mm/1 (J) for 111mm/0 (J) for 111mm/0 ACCESSORIES Note: suffix M = 0mm diameter reflector; suffix L = mm diameter reflector; suffix J = 111mm diameter reflector LX202-Holder LX202 Barndoor Hood 2IN AA* ANG Hood 2IN AA* Backer Ring AAB* Louver Hex AA* Glass Color Filters AA* Spread Lens AA0, AA2, AA, AA* Beam Softener AA* Light Blocking Screens AA01S, AA02S, AA0S* Gel Holder LXM, LXL, or LXJ Louver Hex LXM, LXL, or LXJ** 11/1 mm Light Blocking Screens LXM, LXL, or LXJ: 01S, 02S, 0S** Color and Spread Gels AA, LXM, LXL, or LXJ** LX-S1-REF-B (0mm/1 ) LX-WRD-REF Field Reducer (0mm/20 ) LX-M20-REF-B (0mm/20 ) LX-M0-REF (0mm/20 ) LX-M0-REF-B (0mm/ ) LX-M0-REF (0mm/0 ) LX-M0-REF (0mm/0 ) LX-L20-REF (mm/20 ) LX-J-REF (111mm/1 ) LX-J0-REF (111mm/0 ) LX-J0-REF (111mm/0 ) * LX202-Holder or Barndoor required for use with size AA accessories and M size optics. ** Gel Holder required for use with LXM, LXL, or LXJ accessories.. Select your Mounting Option (00) Track Fitting (0E) Track Fitting with Integral Dimmer (LT) Lumentalk Fitting (2G) Unistrut Fitting (G) C-clamp Fitting (A) Canopy Fitting. Choose other fixture Options: Coiled Cord is available only with 2G and G mounting options. Change 2G to 2C and G to C. (When a coiled cord is not specified, a straight cord is provided.). Choose the letter code for Dimming Type: (TE) Trailing Edge (ELV Reverse Phase) (%) (ED) Integral Dimming (%) (0E & A fitting only) (LT) Lumentalk (<1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (120) for 120V (20) for V (2) for 2V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX202 - T S TE 120 B FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DIMMING VOLTAGE FINISH. Don t forget your Accessories! Color Temperature & Center Point Tolerance Color Temp Center Point Tolerance 200K 200K +/- 0K 000K 20K +/- 0K 00K 20K +/- 0K 000K 000K +/- 0K Chromaticity Specifications R g - Gamut LED R a - CRI R f - Fidelity Area T1-TS - 1 T1-TS - Solid State 0/

3 LUMELEX 202 SERIES XICATO XTM 1MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX202-T120-2S1-00-TE120B, the T120-2 represents an LED module with an output of 2000 lumens, a CRI of, a power usage of 2 watts and a color temperature of 200K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the S1 in LX202-T120-2S1-00-TE120B is a 0mm diameter optic that has a 1-Degree beam with a narrow field. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power LED Module Optic (Reflector) Lumens/CRI/ Wattage S1 M2 WR M M M M J1 J J L2 00//11 2,0,20 2,0 2,10 0 1,0,000,10 2,10 1,,0 00//1 2,0,20 2,0 2,10 0 1,0,000,10 2,10 1,,0 100//1,1,21,2 2, 1,2 1,2,00, 2, 1,0,22 100//20,1,21,2 2, 1,2 1,2,00, 2, 1,0,22 100//2,1,,2,2 1, 2,,00 11,00,2 2,, //2,0,0,0,0 1,0 2,0,000 12,00,0 2,20,0 2000//2,0,0,0,0 1,0 2,0,000 12,00,0 2,20,0 200//1,01,21,2,01 2,2,0,00 1,1,0,01 11,0 200//2,,2,2, 2,,,0 1,0,1, 12, Delivered Lumens LED Module Optic (Reflector) Lumens/CRI/ Wattage S1 M2 WR M M M M J1 J J L2 00// // // ,0 1,0 1,02 1,00 1,02 1,11 100// ,0 1,0 1,02 1,00 1,02 1,11 100//2 02 1,0 1,2 1, 1, 1,22 1,0 1,22 1, 2000// ,10 1,0 1,0 1,0 1,0 1,00 1,0 1, // ,10 1,0 1,0 1,0 1,0 1,00 1,0 1,20 200// , 1, 1,0 1,0 1, 1,0 1, 1, 200//2 1,0 1, 1, 2,21 2,21 2,1 2,10 2,1 2,22 Efficiency = Lumens Per Watt LED Module Optic (Reflector) Lumens/CRI/ Wattage S1 M2 WR M M M M J1 J J L2 00// // // // // // // // //2 2 1 Absolute range of values are +/- % of typical value, and are for all color temperatures LED Module Lumens/CRI/Wattage 00//11 00//1 100//1 100//20 100//2 2000//2 2000//2 200//2 200//2 SKU Code Nominal Fixture Power (+/- 20%), Watts Maximum Inrush Current Amps Minimum Power Factor Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS /

4 LUMELEX 202 SERIES XICATO XTM 1MM OPTICS 2 1/ (mm) LX-S1-REF-B (S1) (0mm/1 ) Anti-reflective coated aspheric lens. Tool-less, twist and lock installation. Black finish. 2 (2mm) LX-WRD-REF (WR) (0mm/20 ) Field reducer. Proprietary field reducing baffle. Black (B), White (W), or Clear (CLR) finish. 2 1/1 (2mm) 1 / (2mm) LX-M20-REF-B (M2) (0mm/20 ) (Narrow Field Angle) Computer designed polycarbonate lens. Tool-less, twist and lock installation. Black finish. 1/ (mm) 11/1 (mm) LX-L20-REF (L2) (mm/20 ) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Black (B), White (W), or Clear (CLR) finish. 1 / (2mm) LX-M0-REF (M) (0mm/20 ) (Wide Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Black (B), White (W), or Clear (CLR) finish. 2 /1 (mm) / (111mm) LX-J-REF (J1) (111mm/1 ) Faceted reflectively coated metal optic. Tool-less, twist and lock installation. Black (B), White (W), or Clear (CLR) finish. 1 1/1 (2mm) LX-M0-REF-B (M) (0mm/ ) (Narrow Field Angle) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Black finish. 2 /1 (mm) / (111mm) LX-J0-REF (J) (111mm/0 ) Faceted reflectively coated metal optic. Tool-less, twist and lock installation. Black (B), White (W), or Clear (CLR) finish. 1 / (2mm) LX-M0-REF (M) (0mm/0 ) (Wide Field Angle) Computer designed polycarbonate specular optic. Toolless, twist and lock installation. Black (B), White (W), or Clear (CLR) finish. 2 /1 (mm) / (111mm) LX-J0-REF (J) (111mm/0 ) Faceted reflectively coated metal optic. Tool-less, twist and lock installation. Black (B), White (W), or Clear (CLR) finish. 1 / (2mm) LX-M0-REF (M) (0mm/0 ) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. Black (B), White (W), or Clear (CLR) finish. Solid State 0/

5 LUMELEX 202 SERIES XICATO XTM 1MM PHOTOMETRIC DATA LED RATING: 1- J1-111mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower CRI J- 111mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower 21 CRI J- 111mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) 0 Center Beam Candlepower 1 CRI LED RATING: 1- LED RATING: 20- J1-111mm DIA Optic Beam Spread (minimum) 1 Center Beam Candlepower 1200 CRI J- 111mm DIA Optic (NFA: Narrow Field Angle) Beam Spread (minimum) 0 Center Beam Candlepower CRI J- 111mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) 0 Center Beam Candlepower 21 CRI All Max. Footcandles at 0 Beam Axis J (0 ) J (0 ) J1 (1 ) All Distances in Feet Photometric Data based on LED Rating: 1- (100 Lumens/CRI/20watts) LED RATING: 20- J (0 ) J (0 ) J1 (1 ) All Distances in Feet All Max. Footcandles at 0 Beam Axis Photometric Data based on LED Rating: 20- (2000 Lumens/CRI/2watts) 0/

6 LUMELEX 202 SERIES ENERGY STAR Below are the LumeLEX 202 fixture combinations that are Energy Star certified. LED Rating LED Module Lumens/CRI/Wattage Color Temp Optic mm/angle Fitting Dimming X T1 X 1- X 2 X M X 2G X ED XTM (1mm) 100//2 200K 0mm/0 Universal Fitting Integral (%) (0E & A fitting only) X 2- X 0 X M X G X 200//2 000K 0mm/0 WFA Pipe Clamp 0-V (%) (A fitting only) X X X M X A 00K 0mm/20 WFA LSI Canopy 0 X 0E 000K X LSI Track Fitting (ED Dimming Only) EF 00 Emergency Fitting Solid State 0/

7 LUMELEX 202 SERIES ACCESSORIES LX202-HOLDER External holder for size AA accesories and LXM Gels. Specify finish. BACKER RING AA Stainless steel ring to hold gel when no other size AA accessories are being used. LX202 BARNDOOR External holder with -way individually adjustable blades for control of light beam. Holds size AA accessories and LXM Gels. Specify finish. 1 LIGHT BLOCKING SCREENS AA Stainless steel mesh screens used alone or in combinations will block from approximately 20% to 0% of the transmitted light without changing color temperature of the light. (LX202-Holder or LX202 Barndoor required for use with size AA Light Blocking Screens) No. % of Light Blocked AA01S 20 AA02S 0 AA0S 0 HOOD 2IN AA 2 inch deep hood (LX202- Holder or LX202 Barndoor required for use with Hood 2IN AA) LOUVER HEX AA 1/ thick Hexcell black metal louver used for thin profile. (LX202-Holder or LX202 Barndoor required for use with LOUVER HEX AA) LOUVER HEX LXM, LXL, OR LXJ 1/ thick Hexcell black metal louver used for thin profile. (Gel Holder required for use with LOUVER HEX LXM, LXL, or LXJ ANG HOOD 2IN AA 2 inch deep angled hood (LX202-Holder or LX202 Barndoor required for use with ANG Hood 2IN AA) GEL HOLDER LXM, LXL, OR LXJ External Gel Holder. Specify holder finish color. Gels not included. Does not hold glass accessories or hood. SPREAD LENSES AND BEAM SOFTENER No. Description % of Light Transmission 0 Spread Lens/Clear ( X 0 ) 2 Spread Lens/Clear ( X 0 ) Spread Lens/Clear (0 X 0 ) Spread Lens/Clear ( X 0 ) Beam Softener/Clear 0 ( X ) (LX202-Holder or LX202 Barndoor required for use with size AA Spread Lens/Beam Softener) 1 LIGHT BLOCKING SCREENS LXM, LXL, OR LXJ Stainless steel mesh screens used alone or in combinations will block from approximately 20% to 0% of the transmitted light without changing color temperature of the light. (Gel Holder reqired for use with size LXM, LXL, or LXJ Light Blocking Screens) 1. Figures vary based upon LED module/optic being used and relationship of screen(s) to LED module/optic and to each other. No. % of Light Blocked LXM, LXL, or LXJ 01S 20 LXM, LXL, or LXJ 02S 0 LXM, LXL, or LXJ 0S 0 0/

8 LUMELEX 202 SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS Size: AA Size: LXM Size: LXL Size: LXJ ( mm diameter) (0 mm diameter) ( mm diameter) (111 mm diameter) Spread Gel GEL-L1-AA GEL-L1-LXM GEL-L1-LXL GEL-L1-LXJ 1 Spread Gel GEL-L-AA GEL-L-LXM GEL-L-LXL GEL-L-LXJ Spread Gel GEL-L-AA GEL-L-LXM GEL-L-LXL GEL-L-LXJ Spread Gel GEL-L20-AA GEL-L20-LXM GEL-L20-LXL GEL-L20-LXJ 20 Spread Gel GEL-L0-AA GEL-L0-LXM GEL-L0-LXL GEL-L0-LXJ 0 Spread Gel GEL-L0-AA GEL-L0-LXM GEL-L0-LXL GEL-L0-LXJ 0 Spread Gel GEL-L0-AA GEL-L0-LXM GEL-L0-LXL GEL-L0-LXJ 0 Spread Gel GEL-L0-AA GEL-L0-LXM GEL-L0-LXL GEL-L0-LXJ 0 Spread Gel GEL-L0B-AA GEL-L0B-LXM GEL-L0B-LXL GEL-L0B-LXJ 0 by Spread Gel GEL-L0B2-AA GEL-L0B2-LXM GEL-L0B2-LXL GEL-L0B2-LXJ 0 by 0.2 Spread Gel GEL-L0B1-AA GEL-L0B1-LXM GEL-L0B1-LXL GEL-L0B1-LXJ 0 by 1 Spread Gel GEL-L0B-AA GEL-L0B-LXM GEL-L0B-LXL GEL-L0B-LXJ 0 by Spread Gel GEL-LB-AA GEL-LB-LXM GEL-LB-LXL GEL-LB-LXJ by Spread Gel GEL-L0B0-AA GEL-L0B0-LXM GEL-L0B0-LXL GEL-L0B0-LXJ 0 by 0 Spread Gel GEL-R1-AA GEL-R1-LXM GEL-R1-LXL GEL-R1-LXJ Beam Softener LumeLEX COLOR GELS Size: AA Size: LXM Size: LXL Size LXJ ( mm (0 mm ( mm (111 mm diameter) diameter) diameter) diameter) Gel Color GEL-R2-AA GEL-R2-LXM GEL-R2-LXL GEL-R2-LXJ Bastard Amber GEL-R-AA GEL-R-LXM GEL-R-LXL GEL-R-LXJ Pale Yellow GEL-R12-AA GEL-R12-LXM GEL-R12-LXL GEL-R12-LXJ Straw GEL-R1-AA GEL-R1-LXM GEL-R1-LXL GEL-R1-LXJ Straw Tint GEL-R1-AA GEL-R1-LXM GEL-R1-LXL GEL-R1-LXJ Medium Straw GEL-R21-AA GEL-R21-LXM GEL-R21-LXL GEL-R21-LXJ Golden Amber GEL-R2-AA GEL-R2-LXM GEL-R2-LXL GEL-R2-LXJ Orange Red GEL-R2-AA GEL-R2-LXM GEL-R2-LXL GEL-R2-LXJ Light Red GEL-R2-AA GEL-R2-LXM GEL-R2-LXL GEL-R2-LXJ Medium Red GEL-R-AA GEL-R-LXM GEL-R-LXL GEL-R-LXJ Lavender GEL-R2-AA GEL-R2-LXM GEL-R2-LXL GEL-R2-LXJ Booster Blue GEL-R1-AA GEL-R1-LXM GEL-R1-LXL GEL-R1-LXJ Sea Blue GEL-R2-AA GEL-R2-LXM GEL-R2-LXL GEL-R2-LXJ Azure Blue GEL-R1-AA GEL-R1-LXM GEL-R1-LXL GEL-R1-LXJ Primary Green GEL-R-AA GEL-R-LXM GEL-R-LXL GEL-R-LXJ Light Grey GEL-R-AA GEL-R-LXM GEL-R-LXL GEL-R-LXJ Medium Grey GEL-R1-AA GEL-R1-LXM GEL-R1-LXL GEL-R1-LXJ Light Frost GEL-R-AA GEL-R-LXM GEL-R-LXL GEL-R-LXJ Tough Silk GEL-R11-AA GEL-R11-LXM GEL-R11-LXL GEL-R11-LXJ Lt. Hamburg Frost GEL-R121-AA GEL-R121-LXM GEL-R121-LXL GEL-R121-LXJ Blue Diffusion GEL-R0-AA GEL-R0-LXM GEL-R0-LXL GEL-R0-LXJ Rose Gold Size: AA Size: LXM Size: LXL Size LXJ ( mm (0 mm ( mm (111 mm diameter) diameter) diameter) diameter) Gel Color GEL-R12-AA GEL-R12-LXM GEL-R12-LXL GEL-R12-LXJ Canary GEL-R20-AA GEL-R20-LXM GEL-R20-LXL GEL-R20-LXJ Half Blue GEL-R1-AA GEL-R1-LXM GEL-R1-LXL GEL-R1-LXJ Shell Pink GEL-R-AA GEL-R-LXM GEL-R-LXL GEL-R-LXJ Sapphire Blue GEL-R-AA GEL-R-LXM GEL-R-LXL GEL-R-LXJ Pale Grey GEL-R2001-AA GEL-R2001-LXM GEL-R2001-LXL GEL-R2001-LXJ Storaro Red GEL-R200-AA GEL-R200-LXM GEL-R200-LXL GEL-R200-LXJ Storaro Green GEL-R200-AA GEL-R200-LXM GEL-R200-LXL GEL-R200-LXJ Storaro Violet GEL-R202-AA GEL-R202-LXM GEL-R202-LXL GEL-R202-LXJ Full Blue GEL-R20-AA GEL-R20-LXM GEL-R20-LXL GEL-R20-LXJ Third Blue GEL-R21-AA GEL-R21-LXM GEL-R21-LXL GEL-R21-LXJ Eighth Blue 1 GEL-R1-AA GEL-R1-LXM GEL-R1-LXL GEL-R1-LXJ Tough 1/ Minusgreen GEL-R-AA GEL-R-LXM GEL-R-LXL GEL-R-LXJ Roscosun (1/ CTO) 2 GEL-R1-AA GEL-R1-LXM GEL-R1-LXL GEL-R1-LXJ Full Straw (CTS) GEL-R-AA GEL-R-LXM GEL-R-LXL GEL-R-LXJ Quarter Straw (CTS) GEL-R0-AA GEL-R0-LXM GEL-R0-LXL GEL-R0-LXJ CalColor 0 Cyan GEL-R1-AA GEL-R1-LXM GEL-R1-LXL GEL-R1-LXJ CalColor 1 Green GEL-R0-AA GEL-R0-LXM GEL-R0-LXL GEL-R0-LXJ CalColor 0 Green GEL-R0-AA GEL-R0-LXM GEL-R0-LXL GEL-R0-LXJ CalColor 0 Pink GEL-R0-AA GEL-R0-LXM GEL-R0-LXL GEL-R0-LXJ CalColor 0 Pink GEL-R0-AA GEL-R0-LXM GEL-R0-LXL GEL-R0-LXJ CalColor 0 Lavender 1 (Boosts 200K to 00K) 2 (Reduces 00K to 00K) *LX202-Holder or Barndoor required for use with AA Gels **Gel Holder required for use with LXM, LXL, and LXJ Gels Solid State 0/

9 COLOR MEDIA COLOR FILTERS As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. All glass color filters are rimmed in a seamless aluminum ring and are slotted for heat expansion. Size Diameter LSI Fixture Series AAA 2 / LumeLEX 2020/200/201/20, SSLCX1, SSLGR1, LumeLEX MAR-S AA LumeLEX 202 (with LX202-Holder or LX202-Barndoor), LumeLEX 202, LumeLEX 20, LumeLEX 20, A 1/2 LumeLEX 200, SSL20, SSLCX0, SSLGR0CL, SSLGR, B 1/ LumeLEX MAR-L C / LumeLEX 20, LumeLEX 20, SSL2, SSLCX, SSLCX, SSLGRCL Special Glass Color Filters LSI will fabricate, on special order, glass color filters in most sizes and shapes. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 / X 1 / labeled glass and dichroic samples in a handy carrying case. 1 % of Light No. Color Transmission 02 Medium Pink 0 Deep Pink 0 Flesh Pink 0 Pale Lavender 1 0 Surprise Pink 1 0 Lilac 21 Warm Red 11 Strawberry 12 Ruby 1 Magenta 1 1 Light Amethyst 2 1 Medium Amethyst 1 1 Deep Amethyst Olive 1 1 Light Green 20 Medium Green 2 21 Deep Green 22 Silver green 2 Yellow Green 2 Emerald Green 12 2 Light Turquoise 2 Medium Turquoise 0 2 Deep Turquoise 2 Light Blue 0 Medium Blue 2 Daylight Gene Moore Blue 1 Grey Light Blue Green Light Amber 0 Medium Amber 1 Deep Amber 2 Straw Gold Canary Yellow Lemon 1 Pumpkin 2 Tangerine 20 Orange 2 Pink Gold 0 Bronze 1 Brass 11 2 Autumn Tan 11 Leaf Brown 1 Butter Pecan Toasted Almond 1 Notes: 1. Values given are approximate due to slight variations in glass color and thickness. 0/

10 COLOR MEDIA DICHROIC COLOR FILTERS In addition to our complete line of glass color filters, LSI now offers dichroic glass color filters that achieve purer, more saturated, richer color by selective wavelength transmission. Since these filters reflect rather than absorb the unwanted color wavelengths, a higher intensity of colored light can be obtained with fewer or lower wattage fixtures. In addition, this selective transmission allows for very accurate color matching from filter to filter. All standard LSI filter sizes are available in a wide palette of well chosen dichroic colors that can be used with all LSI fixtures that accept accessories. LSI dichroic glass color filters have the added benefit of being rimmed for extra durability to allow for frequent usage without fear of breakage or edge chipping. Size Diameter LSI Fixture Series AAA 2 / LumeLEX 2020/200/201/20, SSLCX1, SSLGR1, LumeLEX MAR-S AA LumeLEX 202 (with LX202-Holder or LX202-Barndoor), LumeLEX 202, LumeLEX 20, LumeLEX 20, A 1/2 LumeLEX 200, SSL20, SSLCX0, SSLGR0CL, SSLGR, B 1/ LumeLEX MAR-L C / LumeLEX 20, LumeLEX 20, SSL2, SSLCX, SSLCX, SSLGRCL Special Glass Color Filters LSI will fabricate, on special order, dichroic glass color filters in most sizes and shapes not exceeding a 1 diameter circle overall. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 / X 1 / labeled glass and dichroic samples in a handy carrying case. Technical Data Dichroic color filters are created in a vacuum chamber by multi-layer vapor deposits of different minerals onto low expansion, chemically resistant Borosilicate glass. Deposits are made in alternating layers of varying microscopic thickness which allow very narrow color wavelengths to be selectively transmitted and all other wavelengths to be reflected. LSI does not recommend using dichroic color filters with lamps or fixtures that have beam spreads greater than 0 because a secondary color aura is created by the wide angular transmitted wavelengths that are different than the desired color wavelength. Since there is mainly transmission and reflection of the color wavelengths by the dichroic filter and very little absorption, the dichroic filter can be used with many high temperature lights that normally would not accept color filters. % of Light No. Color Transmission 2001 Light Pink 2002 Medium Pink 200 Hot Pink Pale Pink 20 Deep Magenta Lavender Vivid Magenta Lavender Accent 201 Lilac 201 Purple Fusion Sky Blue 2021 Sea Blue 2022 Cyan 202 Light Blue Green Primary Blue Medium Red Blue Deep Purple Peacock Blue 202 Mediterranean Blue Boost Blue Light Yellow Green 201 Fern Green 202 Turquoise 20 Primary Green 1 20 Industrial Green 200 Yellow Amber Amber Blush 20 Bastard Amber 1 20 Goldenrod 20 Bright Straw 200 Medium Orange Orange 200 Flame Red Primary Red 2 Solid State 0/