D E S C R I P T I O N

Transcription

1 ESCRIPTION Recessed 6-inch LE square downlight with field interchangeable optics deliver narrow, medium and wide distribution patterns ideal for general area lighting. Luminaire is airtight and can be installed in new construction or below the ceiling in renovation applications. Field selectable color temperatures and lumen packages providing additional flexibility. Intended applications include professional offices, healthcare, hospitality, schools, house of worship and other institutional uses. Catalog # Project Comments Prepared by Halo Commercial Type ate SPECIFICATION FEATURES Frame Boat shaped galvanized steel plaster frame with adjustable square plaster lip accommodates 1/2 to 1-1/2 thick ceilings May be installed in new construction; or from below the ceiling in non-accessible ceilings and in remodeling Provided with (4) remodel clips to secure the frame when installing from below the ceiling Universal Mounting Bracket Mounting bracket adjusts 2 vertically from above the ceiling or thru the aperture Use with included mounting bars or 1/2 EMT Removable to facilitate installation from below the ceiling Mounting Bars Captive preinstalled No Fuss mounting bars lock to tee grid with screwdriver or pliers Centering mechanism allows for consistent positioning of fixtures LE Patented SeleCCTable technology allows color temperature and lumen output to be selected in the field iscrete (fixed) lumen output is also available to meet lighting power density code requirements Available in 80 CRI minimum with color accuracy within 3 SCM (refer to chromaticity tech sheet online for details lighting) Integral connector allows for quick connection to the housing flex LE printed circuit board array is field replaceable Passive cooling achieves L70 at 50,000 hours Primary Optic Precision molded square TIR (Total Internal Reflection) optics deliver highly efficient and uniform patterns Available in narrow, medium and wide distribution and can be interchanged without tools Self-flanged downlight reflectors are available in shallow and deep regression Linear spread lens wall wash reflector matches tall downlight profile s are of non-conductive polymer construction, and may be used to meet local code requirements for dead front s attach to LE module with (3) speed clamps Multiple painted or plated finishes are available Retention / module assembly is securely retained in the housing with (2) torsion springs river Field replaceable constant current driver provides low noise operation UNV VAC 50/60Hz input standard Continuous, flicker-free 1% dimming with 0-10V analog control Optional low voltage C driver for use with Eaton s LVP distributed low voltage power system* Emergency Option Provides 90 minutes of standby lighting meeting most life safety codes for egress lighting Available with remote charge indicator and test switch Connected Lighting System Options* WaveLinx tile mount daylight sensor includes control module, sensor and cable providing comprehensive lighting control LumaWatt Pro (powered by Enlighted) wireless tile mount sensor and control kit Junction Box Galvanized steel junction box 20 in 3 internal volume excluding voltage barrier 25 in 3 internal total volume Voltage divider for 0-10V dimming wires [occupies (1) ½ pry-out space] Listed for (8) #12 AWG (four in, four out) 90 C conductors and feed-thru branch wiring (3) ½ and (2) ¾ trade size pryouts available (3) 4-port push wire nuts for mains voltage, with 1-port for fixture connection Compliance culus damp location listed, wet location listed in protected ceilings and IP2x - Above finished ceiling; IP6x - Below finished ceiling Fixed 1000 and 1500 lm versions are Type IC thermally protected and suitable for direct contact to air permeable insulation Not for use in direct contact with spray foam insulation, consult NEMA LS Field selectable, 2000, 3000 and 4000 lm versions are non-ic rated, insulation must be kept 3 from top and sides Airtight per ASTM-E Suitable for use in clothes closets when installed in accordance with the NEC spacing requirements EMI/RFI emissions per FCC 47CFR Part 15 non-consumer limits Contains no mercury or lead and RoHS compliant Photometric testing in accordance with IES LM Lumen maintenance projections in accordance with IES LM and TM Can be used to comply with the State of California Title 24 non-residential lighting controls requirements as a LE luminaire ENERGY STAR listed for commercial applications, reference certified light fixtures database Warranty Five year limited warranty, consult website for details. *Refer to LVP, WaveLinx and LumaWatt Pro specifications and design guides online. 61S 64S 6-inch Square Lens and Lens Wall Wash Featuring SeleCCTable color temperature AN Selectable lumen 1000/1500/2000/ 3000/4000 Lumen colors T517030EN November 15, :07 PM

2 ENERGY ATA LE MOULE LOW LUMEN RANGE 1000 lumen Input Current (A) Input Power (W) In-rush (A) In-rush uration (ms) TH (%) <15.1 <16.7 PF lumen Input Current (A) Input Power (W) In-rush (A) In-rush uration (ms) TH (%) <13.3 <15.5 PF lumen (low lumen) Input Current (A) Input Power (W) In-rush (A) In-rush uration (ms) TH (%) <8.2 <10.6 PF FS LE MOULE HIGH LUMEN RANGE 2000 lumen (high lumen) Input Current (A) Input Power (W) In-rush (A) In-rush uration (ms) TH (%) <11 <13.6 PF lumen Input Current (A) Input Power (W) In-rush (A) In-rush uration (ms) TH (%) <9.05 <11.8 PF lumen Input Current (A) Input Power (W) In-rush (A) In-rush uration (ms) TH (%) <5.9 <8.8 PF IMENSIONS 6, LOW LUMEN MOULE ( LUMEN) 6, HIGH LUMEN MOULE ( LUMEN) 8.1 [206mm] 8.1 [206mm] 13 [331mm] 64S SHALLOW REFLECTOR 13 [331mm] 3.3 [84mm] 4.7 [119mm] 5 [127mm] 64S SHALLOW REFLECTOR 5.9 [151mm] 5.9 [151mm] 61S EEP REFLECTOR 4.8 [122mm] 4.7 [119mm] 6 [165mm] 61S EEP REFLECTOR 6 [152mm] 6 [152mm] max height (above finished ceiling) LE MOULE low lumen module 248FS high lumen module LUMEN RANGE S eep S Shallow 4.2 (3.3 w/out bar bracket) 5.0

3 Ordering Information Sample : FS24010REM7-248FS - 61SMH A complete luminaire consists of a mounting frame, LE module, and reflector (order separately) Ordering Information, VAC, 0-10V analog dimming Mounting Frame Input / Control Options = 6 square new construction and remodeler housing Field Selectable FS12 = field selectable 1000, 1500 and 2000 lumens (nominal), use with LE module FS24 = field selectable 2000, 3000 and 4000 lumens (nominal), use with 248FS LE module Fixed, Factory Set 10 = 1000 lumens (nominal), use with LE module 15 = 1500 lumens (nominal), use with LE module 30 = 3000 lumens (nominal), use with 248FS LE module 010= VAC, 50/60Hz, 0-10V analog 1% dimming REM7=7 watt emergency module with remote test / indicator light, use with 010 only REM14=14 watt emergency module with remote test / indicator light, use with 010 only LWTP1=Factory installed LumaWatt Pro wireless tile mount sensor kit, 010 only SWP1=Factory installed WaveLinx tile mount daylight sensor, includes control module, sensor and cable, 010 only Ordering Information, istributed Low Voltage Power - for use with Eaton LVP system only Mounting Frame Input / Control Options = 6 square new construction and remodeler housing Fixed, Factory Set 10 = 1000 lumens (nominal), use with LE module 15 = 1500 lumens (nominal), use with LE module 20 = 2000 lumens (nominal), use with LE module 30 = 3000 lumens (nominal), use with 248FS LE module 40 = 4000 lumens (nominal), use with 248FS LE module LV=distributed low voltage driver, 1%-100% dimming. LV for use with Eaton s LVP system only. Refer to LVP low-voltage power module and LVP specifications for details. REMV7 = 7 watt emergency module with remote test / indicator light, use with LV only REMV14 = 14 watt emergency module with remote test / indicator light, use with LV only Accessories HB128APK=L channel hanger bar, 26, pair (replacement) RMB22=Adjustable wood joist mounting bars, pair, extend to 22 long H347=347 to 120V step down transformer, 75VA H347200=347 to 120V step down transformer, 200VA PORLWTP1=LumaWatt Pro wireless sensor kit, field installed, 010 only TWSWP1=WaveLinx wireless sensor kit, field installed, 010 only LE CRI/CCT = 6 LE module. 12=Field selectable 1000, 1500 and 2000 lumens (nominal), preset for 2000 lumens, use with FS12*, 10*, 15*, 20* housings 34=Field selectable 2000, 3000 and 4000 lumens (nominal), preset for 4000 lumens, use with FS24*, 20*,30*, 40* housings 8FS =80 CRI (minimum), field selectable 3000, 3500 and 4000 CCT, preset for 3500K - eep istribution 2 Finish Flange Accessories 61S = 6 square reflector, non-conductive polymer, use with modules only N = narrow, TIR lens included (58 beam angle, 0.84 SC) M = medium, TIR lens included (68 beam angle, 1.0 SC) W = wide, TIR lens included (8 beam angle, 1.3 SC) WW = linear spread lens wall wash, insert included Vacuum Metallized C = Specular clear H = Semi-specular clear (haze) Painted MB = Matte black MW = Matte white Blank = Vacuum Metallized flange standard on C, H reflectors Blank = White flange on MW reflectors Blank = Black flange on MB reflectors WF = White flange option available with C, H, MB reflectors TIR6SN = narrow distribution TIR lens for 6 reflectors 1 TIR6SM = medium distribution TIR lens for 6 reflectors 1 TIR6SW = wide distribution TIR lens for 6 reflectors 1 S6WW = wall wash replacement insert for 6 wall wash reflector - Shallow istribution 2 Finish Flange Accessories 64S = 6 square shallow reflector, non-conductive polymer, use with modules only N = narrow with TIR lens included (59 beam angle, 0.84 SC) M = medium with TIR lens included (7 beam angle, 0.98 SC) W = wide with TIR lens included (103 beam angle, 1.35 SC) Vacuum Metallized C = Specular clear H = Semi-specular clear (haze) Painted MB = Matte black MW = Matte white Blank = Vacuum Metallized flange standard on C, H reflectors Blank = White flange on MW reflectors Blank = Black flange on MB reflectors WF = White flange option available with C, H, MB reflectors TIR6SN = narrow distribution TIR lens for 6 reflectors 1 TIR6SM = medium distribution TIR lens for 6 reflectors 1 TIR6SW = wide distribution TIR lens for 6 reflectors 1 Notes: 1. TIR lenses for replacement - field interchangeable 2. Values are nominal for white reflectors, others may vary. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice.

4 PHOTOMETRY - EEP REFLECTORS 61S SERIES NARROW ISTRIBUTION - SPECULAR CLEAR FINISH, 2000 LUMEN MOEL, 80 CRI, 3500K NARROW (52 BEAM*) SC 0.79 UGR 12.9 P SNC 2388 Lm Lm/W º 3 5.5' ' ' ' ' ' MEIUM ISTRIBUTION - SPECULAR CLEAR FINISH, 2000 LUMEN MOEL, 80 CRI, 3500K MEIUM (62 BEAM*) SC 0.86 UGR 13.7 P SMC 2316 Lm Lm/W º 3 5.5' ' ' ' ' ' WIE ISTRIBUTION - SPECULAR CLEAR FINISH, 2000 LUMEN MOEL, 80 CRI, 3500K WIE (75 BEAM*) SC 1.26 UGR 18.7 P SWC 2109 Lm Lm/W º 3 5.5' ' ' ' ' *Values are nominal for specular clear reflectors, others may vary. SC = Spacing Criteria UGR = Unified Glare Rating 12' Photometric Multipliers (nominal lumen values) 1000 Lumen 1500 Lumen 2000 Lumen 3000 Lumen 4000 Lumen Multipliers for relative lumen values with other series models. CCT Multipliers 80CRI 3000K 3500K 4000K Color Finish Multipliers Finish code C H MB MW Finish Specular Clear Semi-Specular Matte Black Matte White Narrow Multiplier Medium Multiplier Wide Multiplier Multipliers for relative lumen values with other cone color finishes. Multipliers for relative lumen values with other series color temperatures.

5 PHOTOMETRY - EEP REFLECTORS 61S SERIES WALL WASH ISTRIBUTION - SPECULAR CLEAR FINISH, 2000 LUMEN MOEL, 80 CRI, 3500K WALL WASH SC 0.98 P SWWC 1602 Lm 80.1 Lm/W º SC = Spacing Criteria, nominal for specular clear reflector, others may vary. SINGLE UNIT FOOTCANLES 2.5 from wall (distance from fixture along wall) MULTIPLE UNIT FOOTCANLES 2.5 from wall (distance from fixture along wall) 2.5 from wall (distance from fixture along wall) Photometric Multipliers (nominal lumen values) 1000 Lumen 1500 Lumen 2000 Lumen 3000 Lumen 4000 Lumen Multipliers for relative lumen values with other series models. CCT Multipliers 80CRI Color Finish Multipliers Finish code C H MB MW Finish Specular Clear Semi-Specular Matte Black Matte White Wall Wash Multiplier Multipliers for relative lumen values with other cone color finishes. 3000K 3500K 4000K Multipliers for relative lumen values with other series color temperatures. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice.

6 PHOTOMETRY - SHALLOW REFLECTORS 64S SERIES NARROW ISTRIBUTION - SPECULAR CLEAR FINISH, 2000 LUMEN MOEL, 80 CRI, 3500K NARROW (59 BEAM*) SC 0.82 UGR 18.1 P SNC 2470 Lm Lm/W º 3 5.5' ' ' ' ' ' MEIUM ISTRIBUTION - SPECULAR CLEAR FINISH, 2000 LUMEN MOEL, 80 CRI, 3500K MEIUM (7 BEAM*) SC 0.96 UGR 19.8 P SMC 2427 Lm Lm/W º 3 5.5' ' ' ' ' ' WIE ISTRIBUTION - SPECULAR CLEAR FINISH, 2000 LUMEN MOEL, 80 CRI, 3500K WIE (103 BEAM*) SC 1.3 UGR 21.9 P SWC 2261 Lm Lm/W º 3 5.5' ' ' ' ' *Values are nominal for specular clear reflectors, others may vary. SC = Spacing Criteria UGR = Unified Glare Rating 12' Photometric Multipliers (nominal lumen values) 1000 Lumen 1500 Lumen 2000 Lumen 3000 Lumen 4000 Lumen Multipliers for relative lumen values with other series models. CCT Multipliers 80CRI 3000K 3500K 4000K Color Finish Multipliers Finish code C H MB MW Finish Specular Clear Semi-Specular Matte Black Matte White Narrow Multiplier Medium Multiplier Wide Multiplier Multipliers for relative lumen values with other cone color finishes. Multipliers for relative lumen values with other series color temperatures. Eaton 1121 Highway 74 South Peachtree City, GA P: Specifications and dimensions subject to change without notice.