Features Strict temperature management Digital display The s digital display makes it easy to check the set temperature at a glance. Password function
|
|
- Tamsin Holmes
- 5 years ago
- Views:
Transcription
1 ll-round Soldering Station ll-round Soldering Station Digital Soldering N2 Soldering (Option) Hot Tweezer Rework (Option) Features djustment mode, Preset mode, and Password function Separable tip/heater design provides superior cost performance. Packing List Specifications Station, Handpiece (FX-880), Iron holder, Instruction manual Power consumption 70 W Temperature stability ±ºC at idle temperature Station Output voltage Dimensions Weight C 26 V 00 (W) 20 (H) 20 (D) mm.2 kg Soldering Iron Shape-B (No.T8-B).2 m 27 mm (with B tip) 46 g (with B tip) 0
2 Features Strict temperature management Digital display The s digital display makes it easy to check the set temperature at a glance. Password function Settings can be locked using a password to prevent them from being changed unexpectedly. Preset mode Simply select the desired temperature from a selection of preset temperatures registered in advance. (Up to 5 preset temperatures can be registered.) The display returns to Preset when the UP button is pressed a sixth time. djustment mode With adjustment mode, what used to be a troublesome procedure is now as simple as entering the measured tip temperature in the. Graph of a comparison of the performance of the HKKO and a conventional station Temperature ( C) sec sec. 20 Soldering tip Point Conventional model (HKKO 936, 937) Point 2 Point 3 Point 4 Point Time (sec.) Measuring the tip temperature with a tip thermometer (HKKO FG-00) Test criteria Thermocouples are mounted on the tip and Measurement method the soldered portion on the board, and the time until the soldered portion reaches 250ºC is measured for 5 points. Board Paper phenol copper board Component used Connector Tip shape Shape-.2D Temperature setting 3C Solder Lead-free solder (Sn/g/Cu), diameter: 0.5 mm Soldering Iron
3 .T8 焊咀系列, 适用于 FX-880 /FX-8802 / 单位 m m 罕队 r oe 才 =3 0 年 E T8-C08 T8-C ~ 盟 **T8-CF5 T8-C f 3LE 吨 p0 苦 T 8-C3.. 医国 T 8-C4. T8-C5 T8-K T 军官 事枉 由 EF 俨 EF 官? T 雷雨 T 医函 T ~ 困 T T8-DL 2 偌 ~ 时 ~!;~!.~~~ 管 ~ 牢牢句 c:p 0 T8-S9 宣斗 cf3 T 自 以上全部缚姐均适用于 FX 幽 880 餐 焊咀只在创面部份镀锡. 适月 子. 适用于阻 FX 幽 8802 N2 氯气僻铁必须配合排气俐仔细介使 ) I B3662 I 排气钢衍组合 I B3663 I }I~ 气峭组合 B I ß3664 I flv'\ 钢管组合 C I B366S I fi~~ 钢管组合 D
4 ccessories for HKKO Packing List N2 Soldering Iron FX-8802 Handpiece, Shield plate, Instruction manual Handpiece, Instruction manual Handpiece, Caution label, Heat resistant pad, Instruction manual NOTE: The soldering iron cannot be used as a standalone device. Specifications Soldering Gun SMD Hot Tweezers FX-8802 Shape-B (No.T8-B).2 m 90 mm (with B tip) 59 g (with B tip and nozzle assembly ) and tube Standard guide nozzle Usable solder diameter Dimensions Shape-3C pre-tinned surface 45º (No.T8-CF3) ø.0 mm 0.6, 0.8,.0,.2,.6 mm. m 70 (W) 80 (H) 23 (D) mm 77 g Temperature range 200 to 400ºC Shape-2L (No. 378) 2 pcs/set.2 m 86 mm 93 g Option Part No. Name Specifications C437 Iron holder (with cleaning sponge) Part No. Name Specifications FH800-04BY Iron holder (with cleaning sponge) Blue & yellow 2
5 Replacement Tips for the FX-880 and Unit: mm pplicable for pplicable for T8-B Shape-B T8-SB Shape-SB T8-BR02 Shape-0.2BR T8-BL Shape-BL T8-C05 Shape-0.5C R0.5 4 ø For SOP Component Part No. Name Size of Tip Shape 390 Tip/SOP 4L 4 mm 39 Tip/SOP 6L 6 mm 380 Tip/SOP 8L 8 mm 38 Tip/SOP 0L 0 mm 382 Tip/SOP 3L 3 mm 392 Tip/SOP 5L 5 mm 383 Tip/SOP 8L 8 mm 384 Tip/SOP 20L 20 mm 385 Tip/SOP 25L 25 mm 3.5 pplicable for pplicable for pplicable for T8-C08 Shape-0.8C ø T8-C Shape-C T8-CF* ø 3.5 T8-CF5* Shape-.5C.6 ø T8-C2 Shape-2C T8-CF2* 2. ø2 0.5 T8-CSF25* Shape-2.5CS pplicable for pplicable for pplicable for T8-C3 Shape-3C T8-C4 Shape-4C T8-C5 Shape-5C T8-K Shape-K T8-D08 Shape-0.8D T8-CF3* T8-CF4* 3.2 ø3 4.2 ø4 5 ø5 pplicable for pplicable for pplicable for ø T8-D2 Shape-.2D T8-D6 Shape-.6D T8-D24 Shape-2.4D T8-D32 Shape-3.2D T8-DL2 Shape-.2DL ø ø.6 ø ø pplicable for T8-DL2 Shape-2DL T8-DL32 Shape-3.2DL T8-S3 Shape-S3 T8-S4 Shape-S4 T8-S6 Shape-S6 ø2 T8-S9 Shape-S9 0.4 ø ø3.2 T8-I Shape-I Replacement Tips and Nozzles for the FX-8802 Please see the replacement tips on P.33 Replacement Tips for the For Chip Component Part No. Name Size of (B) Tip Shape 577 Tip/CHIP 0.5L 0.5 mm 379 Tip/CHIP L mm 378 Tip/CHIP 2L 2 mm B 388 Tip/CHIP 0.5C.5 (0.5) mm 389 Tip/CHIP 0.5I 5 mm 576 Tip/CHIP 2.6C 2.6 mm ø5.2 8 R0.25 * These tips are tinned on the soldering surface only ø.2 ø.3 ø2.5 ø Soldering Iron
Soldering iron. Analog type of HAKKO FX-951 Lock key enables temperature control even on this analog type unit Supports the N 2 system.
Soldering iron Analog type of HAKKO FX-951 Lock key enables temperature control even on this analog type unit Supports the N 2 system. Model No. FX950 Power consumption 75W Temperature range 200-450ºC
More informationSoldering Station. Power consumption 140W Temperature range ºC Temperature stability ±5ºC at idle temperature. Station
Soldering Station Soldering station with two irons (Two-iron type of HAKKO FX-951) Two different soldering iron tips selected according to component sizes can be simultaneously used. Temperature on each
More informationSoldering iron. Multi-station that enables soldering, desoldering, and SMD rework all with a single unit Supports the N 2 system.
Soldering iron Multi-station that enables soldering, desoldering, and SMD rework all with a single unit Supports the N 2 system. Model No. FM203 Power consumption 140W Temperature range 200-450ºC Temperature
More informationaccessories The perfect complement for soldering and desoldering jobs
accessories The perfect complement for soldering and desoldering jobs 44 KN- Nitrogen kit This is the ideal solution for improving the quality of any solder joint by using nitrogen because it provides
More informationMINI PARALLEL REMOVER. Instruction Manual
MINI PARALLEL REMOVER Instruction Manual Thank you for purchasing the FM-2023 mini parallel remover. Please read this manual before operating the FM-2023. Keep this manual readily accessible for reference.
More informationThermal Wire Stripper
Thermal Wire Stripper Thermal Wire Stripper Blade not included Thermal wire stripper that ensures clean-cut removal of wire insulation High stripping perfmance ensures clean cut through highly heat-resistant
More informationTip cleaning tools. stands. TT-A Tip tinner. CL6211 Cleaning sand. CL6205 Cleaning sand. CL6217 Metal brush. CL6790 Dry Cleaning system + Metal wood
Tip cleaning tools JBC introduces its new range of tip cleaning tools created to reduce tip oxidation caused by the frequent high, temperatures, aggressive fluxes and chemical components. The range is
More informationSelf-Feeder Soldering Station DSF76D-IW. Operation Manual
Self-Feeder Soldering Station DSF76D-IW Operation Manual Thank you for purchasing the Self-Feeder Lead Free Soldering Station. Please read this manual before operating the unit. Store this manual in a
More informationSelf Feeder. Soldering-Related Equipment and Materials. V-Groove Maker. Features. Packing List. Specifications. Option
Self Feeder V-Groove Maker Features Minimize solder and flux splash Cutting a V-groove on the solder surface enables the release of gas pressure generated by the flux, thereby suppressing splash. HAKKO
More informationC A T a L O G U E CLASSIC
C A T a L O G U E CLASSIC THE STRENGTH OF EXPERIENCE Ever since 1929, JBC s sole aim has been to leave no stone unturned in striving to satisfy its customers, for that is what our company is all about.
More informationPantomimes 圣诞节上演的话剧. Look Behind You! 就在你身后!
Pantomimes 1 Look Behind You! 就在你身后! Pantomimes 圣诞节上演的话剧 In winter in Britain, many children and adults enjoy going to the theatre to watch a pantomime Pantomimes are a very old form of entertainment,
More informationArduTouch Music Synthesizer
ArduTouch Music Synthesizer Assembly Instructions rev C Learn To Solder download for free at: http://mightyohm.com/soldercomic The following photos will show you how to solder. But feel free to download
More informationEJX / EJA-E series. For the description on the applicable page of users manual as shown in the item 1, please use revised information as shown in 2.
EJX / EJA-E series Change No. 15-013 For the description on the applicable page of users manual as shown in the item 1, please use revised information as shown in 2. 1. Applicable Users and Page IM No.
More informationHow to solder SMD component on Awesome PCB or any other kind of PCB.
How to solder SMD component on Awesome PCB or any other kind of PCB. Step by step tutorial, with no steps to skip. Step 1 - What do we need? Step 2 - Fixing PCB Step 3 - Preparing for soldering Step 4
More informationInstruction Manual. Model WU10. VP cable. IM 12B06W02-02E-E 9th edition
Instruction Manual Model WU10 VP cable 9th edition 2 Contents 1. Preface 3 1.1. Introduction 3 1.2. Unpacking & Checking 3 1.3. Waranty & Service 3 2. General Specifications 4 2.1 Specifications WU10-V-
More informationBAUHAUS. Progression / Precision Intervals / Columns. Progression. Precision. Intervals. Columns
Progression / Precision Intervals / Columns Progression Precision Intervals Columns INSPIRED. INSPIRING. 源于灵感智启灵感 Walter Gropius opened the doors to Bauhaus; he established Staatliches Bauhaus Weimar at
More informationInt936A / 936A Int936 / 936
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
More informationCATALOG CLASSIC Series 15.0
www.tekserve.com.tw CATALOG CLASSIC Series 15.0 ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 The power of experience More than 80 years of experience have placed
More informationHeat Guns: Economy Model Industrial Grade Models Accessories
S O L D E R I N G & H E AT P R O D U C T S J2040SS J012 & J020 J315 Series J050KT J080KT J305 J025 J040 J060 J700KT J035 J060VT J600 J100 J310L J220 J300 JT004 JT008 JT035 JT006 J045DS JT001 JT002 JT005
More informationStars Snub Twilight Premiere 明星怠慢 暮光之城 首映式
Stars Snub Twilight Premiere 明星怠慢 暮光之城 首映式 1 Stars Snub Twilight Premiere 明星怠慢 暮光之城 首映式 Dedicated Fans Left Disappointed 忠实的粉丝们大失所望 Read the text below and do the activity that follows. 阅读下面的短文, 然后完成练习
More informationKey Tips & Techniques for Taking Care of Solder Iron Tips
Key Tips & Techniques for Taking Care of Solder Iron Tips 1 Tip Construction Copper Core Iron Plating Nickel plating over the Iron Chrome plating over the nickel Tin over Chrome plating 2 What is in a
More informationTips in Soldering. By Jesus Beltran. Team J (AKA J Crew) EEC 134AB, Professor Xiaoguang Liu UC Davis College of Engineering
Tips in Soldering By Jesus Beltran Team J (AKA J Crew) EEC 134AB, 2015 16 Professor Xiaoguang Liu UC Davis College of Engineering INTRODUCTION Basic soldering skills is a trait that every electronic/electrical
More informationSOLDERING IRON TORCH HEAT GUN
APPLICATIONS SOLDERING IRON Electrical / Electronic Circuit repair Circuit Board Connections Wire Harness repairs General Soldering Instant anti-static soldering Welding Jewelry, Eyeglass Frame Repair
More informationEJX / EJA-E series. For the description on the applicable page of users manual as shown in the item 1, please use revised information as shown in 2.
User s EJX / EJA-E series Change No. 15-013 For the description on the applicable page of users manual as shown in the item 1, please use revised information as shown in 2. 1. Applicable Users and Page
More informationCF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
More informationAnalog Technologies. Auto Iron ATAS80
Figure 1. The Photo of main machine Figure 2. Photo of MAIN FEATURES Large LCD screen display, convenient for adjusting Anti-static function to protect precise chip soldering Quick temperature rise Unit
More information为了满足客户不同的焊接需求需要, 莱丹研发了最新的 HEMTEK ST 焊接导向件, 可应用于厚达 4mm/0.16 英寸材料的焊接
1. Produkt-Neuheiten / Product News NEW Guide for the HEMTEK ST Plastic Welding > Technical Textiles & Industrial Fabrics 1.1 New Guide - HEMTEK ST 最新可调节焊接导向件 (4mm) 为了满足客户不同的焊接需求需要, 莱丹研发了最新的 HEMTEK ST
More informationUS SEALED SERIES. Structure. Features 特点. Connector M Connector F
US SEALED SERIES Structure Connector M Connector F Features 特点 Housing Housing TPA TPA Terminal Terminal Wire Seal Wire Seal US sealed series comply with SAE/USCAR-2. This series consits of 0.64mm, 1.5mm,
More informationGSM/GPRS. By Mendy Ouzillou Silicon Laboratories Inc. Austin, TX GSM 3GPP (GSM) burst current) GSM900 DCS V
GSM/GPRS By Mendy Ouzillou Silicon Laboratories Inc. Austin, TX GSM Q ( ) 3GPP (GSM) burst current) GSM900 DCS1800 50 Ω 3.5 V 25 3.7 V www.silabs.com/pa-calculations 32.75 (GSM) dbm (DCS) 29.75 dbm 1-3)
More informationDiscrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationVocia VAM-1. Manual. January Biamp Systems, 9300 SW Gemini Drive, Beaverton, Oregon U.S.A. (503)
Vocia VAM-1 Manual January 2013 Biamp Systems, 9300 SW Gemini Drive, Beaverton, Oregon 97008 U.S.A. (503) 641-7287 www.biamp.com IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these
More informationLong-Awaited Film 期待已久的影片
Long-Awaited Film 期待已久的影片 1 Long-Awaited Film 期待已久的影片 Stars Turn Out for the Premiere in London 明星亮相伦敦首映式 Read the text below and do the activity that follows. 阅读下面的短文, 然后完成练习 : Sex and the City was a
More informationSSL - Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationunit 3: GENErAL ElectriCAL SySTEM DiAGNOSiS
Electrical/Electronic Systems unit 3: GENErAL ElectriCAL SySTEM DiAGNOSiS lesson 4: wire and connector repairs I. Connector repairs A. Connector repairs involve fixing damaged wires. Wires are marred due
More informationEJX / EJA-E series. For the description on the applicable page of users manual as shown in the item 1, please use revised information as shown in 2.
User s EJX / EJA-E series Change No. 15-013 For the description on the applicable page of users manual as shown in the item 1, please use revised information as shown in 2. 1. Applicable Users and Page
More informationHeavy Duty Station Ref. HD-B
www.jbctools.com Heavy Duty Station Ref. HD-B Safety It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - Do not use the units for any purpose other than
More informationEJX / EJA-E series. For the description on the applicable page of users manual as shown in the item 1, please use revised information as shown in 2.
EJX / EJA-E series Change No. 15-013 For the description on the applicable page of users manual as shown in the item 1, please use revised information as shown in 2. 1. Applicable Users and Page IM No.
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Contact Size. Contact Wire Max Size Gauge Insulation mm Contact
The Industrial and Solid State Lighting markets continue to look for new products which will reduce size and cost without jeopardizing performance. The new dual-beam boxed contact system from AVX surface
More informationSoldering and Desoldering Instruction
Soldering and Desoldering Instruction Soldering is defined as "the joining of metals by a fusion of alloys which have relatively low melting points". In other words, you use a metal that has a low melting
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationww w.jbctools.com CATALOGUE CLASSIC Series 12.0 THE POWER OF EXPERIENCE
ww w.jbctools.com CATALOGUE CLASSIC Series 12.0 THE POWER OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 the power of experience More than 80 years of
More informationHow to Hand Solder an Electric Wire to a COB LED
How to Hand Solder an Electric Wire to a COB LED Table of Contents 1. Overview 2. Necessary/Recommended Soldering Equipment 3. How to Choose the Optimal Soldering Iron Tip 4. Cautions/Suggestions for Stripping
More informationWorking Instruction, Electrical
Applicable for K700i/K700c Contents 1 Replacement of parts...2 1.1 Battery connector...2 1.2 Board to board connector...3 1.3 FPC connectors...4 1.4 Bending shield can fence...5 1.5 Replacing shield can
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
More informationAssembly Instructions for SCA6x0 and SCA10x0 series
Technical Note 71 Assembly Instructions for SCA6x0 and SCA10x0 series TABLE OF CONTENTS Table of Contents...1 1 Objective...2 2 VTI'S DIL-8 and DIL-12 packages...2 3 Package Outline and Dimensions...2
More informationMPA250 Multi-Purpose Amplifier Operation Manual
MPA250 Multi-Purpose Amplifier Operation Manual Biamp Systems 9300 S.W. Gemini Drive Beaverton, OR 97008 USA +1.503.641.7287 www.biamp.com MPA250 TABLE OF CONTENTS Safety Information Front Panel Rear Panel
More informationCPA 130 Power Amplifier Operation Manual
CPA 130 Power Amplifier Operation Manual Biamp Systems 9300 S.W. Gemini Drive Beaverton, OR 97008 USA +1.503.641.7287 www.biamp.com CPA130 TABLE OF CONTENTS Safety Information Front Panel Rear Panel Precautions
More informationCeramic Monoblock Surface Mount Considerations
Introduction Technical Brief AN1016 Ceramic Monoblock Surface Mount Considerations CTS ceramic block filters, like many others in the industry, use a fired-on thick film silver (Ag) metallization. The
More informationKing Arthur 亚瑟王. A Legendary King 一个具有传奇色彩的国王. Read the text below and do the activity that follows. 阅读下面的短文, 然后完成练习
King Arthur 1 King Arthur 亚瑟王 A Legendary King 一个具有传奇色彩的国王 Read the text below and do the activity that follows. 阅读下面的短文, 然后完成练习 The story of King Arthur is one that has been told for hundreds of years.
More informationPI & T Attenuators. Version This document is for printed circuit board version 0.0a for both the PI and T attenuators.
PI & T Attenuators Version This document is for printed circuit board version 0.0a for both the PI and T attenuators. Overview & Features: The PI and T attenuators use 0805 resistors and for most values
More informationHighest Value-For-Money Digital oldering Station Model DSSLF04HESD. Versatile production horse for different soldering applications, low running cost
Highest Value-For-Money Digital oldering Station Model DSSLF04HESD Versatile production horse for different soldering applications, low running cost Salient Features Power/Control unit has in-built following
More informationPremium Soldering station
www.jbctools.com English Premium Soldering station Ref. DIT-D 2 www.jbctools.com Packing List The following items should be included: DI Control Unit... 1 unit Stand... 1 unit Sponge... 1 unit Cartridge...
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER: DESCRIPTION: MODEL NO: HK-AB-060A300-D56PART NO: DESIGNED NO: 160873-0820 DATE: AUG.20th.2016 CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES 經理 田青松 工程師 歐陽建瓊
More informationHigh frequency ratio antenna for RFID tags
High frequency ratio antenna for RFID tags Jieh-Sen Kuo *(1), Jyun-Jie Wang (2), and Chih-Yu Huang (3) (1) Department of Electronic Engineering, Kao-Yuan University, Kaohsiung, Taiwan 821, Republic of
More informationRAY S REWORK SECRETS TRAINING CERTIFICATION TEST (DVD-13C) v.3
This test consists of twenty multiple-choice questions. All questions are from the video: Ray s Rework Secrets (DVD-13C). Each question has only one most correct answer. Circle the letter corresponding
More informationCATALOGUE CLASSIC Series THE POWER OF EXPERIENCE
CATALOGUE CLASSIC Series THE POWER OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 More than 80 years of experience have placed JBC at the technological
More informationBetter Soldering (A COOPER Tools Reprint) Overview Solder and Flux Base Material
Better Soldering (A COOPER Tools Reprint) Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment. Overview Soldering is accomplished
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER: DESCRIPTION: MODEL NO: PART NO: DESIGNED NO: 170408-0613 JUL.31th.2017 DATE: CUSTOMER APPROVED SIGNATURES VENDOR APPROVED SIGNATURES 經理 課長 繪圖員 田青松 歐陽建瓊 羅珍珍 CUSTOMER
More informationSoldering Basics. Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment.
Soldering Basics Purpose We hope this short manual will help explain the basics of Soldering. The emphasis will be on the care and use of equipment. Overview Soldering is accomplished by quickly heating
More informationSMD-Dummy-BNC Assembly Instructions
This small QRP sized dummyload was designed as a learning tool for SMD soldering by using larger 2512 resistors with only 1 small SOT-23 diode. The 50 ohm load will operate from 500KHz to 30MHz with an
More informationELECTRICAL CONNECTIONS
ELECTRICAL CONNECTIONS Lesson 13 EET 150 Electrical Connections Learning Objectives In this lesson you will: see different methods of making electrical connections. learn a procedure for making soldered
More informationGB/T National Standard of the People s Republic of China 钢板制对焊管件. Steel Plate Butt-welding Pipe Fittings
GB/T 13401-2005 ICS 23.067 J National Standard of the People s Republic of China GB/T 13401-2005 Replace GB/T 13401-1992 钢板制对焊管件 Steel Plate Butt-welding Pipe Fittings Issued on Sept 19, 2005 Implemented
More informationAPPLICATION NOTES FOR THROUGH-HOLE LEDs
APPLICATION NOTES FOR THROUGH-HOLE s Storage conditions 1. Avoid continued exposure to the condensing moisture environment and keep the product away from rapid transitions in ambient temperature. 2. s
More informationGeneration 3 Sensus LED Series
Sensus LED Series Product Datasheet Generation 3 Sensus LED Series Pure White Targeted COB Arrays Below the Black Body Locus (BBL) Data Sheet Features: Table of Contents Technology Overview.... 2 Test
More informationSOLDERING & BRAZING SOLDERING & BRAZING
SOLDERING & BRAZING SOLDERING & BRAZING Soldering Cleaning pads 198 Electric soldering pliers 198 Electric soldering unit 199 Turbo soldering torches 200 Solder wire and solder paste 201 REMS Cu-Vlies
More informationHETERO JUNCTION FIELD EFFECT TRANSISTOR NE4210M01
查询 供应商 PRELIMINARY DATA SHEET HETERO JUNCTION FIELD EFFECT TRANSISTOR C to Ku BAND SUPER LOW NOISE AMPLIFIER N-CHANNEL HJ-FET DESCRIPTION The is a Hetero Junction FET that utilizes the hetero junction
More informationPace Catalog. SX-70 Handpiece. SX-70 Replacement Parts Diagram. SX-70 parts Diagram See page 12 for the description of parts.
SX-70 Handpiece SX-70 Replacement Parts Diagram SX-70 parts Diagram See page 12 for the description of parts page 11 SX-70 Handpiece SX-70 Replacement Parts ITEM 1 3 10 11 12 14 14 16 19 23 24 26 27 28
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More information1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
More informationFDTD Modeling of Noise in Computer Packages
FDTD Modeling of Noise in Computer Packages Wiren Dale Becker IBM East Fishkill Raj Mittra University of Illinois at Urbana-Champaign Abstract In this paper, we discuss the electromagnetic modeling of
More informationAssembly Instructions for SCC1XX0 series
Technical Note 82 Assembly Instructions for SCC1XX0 series TABLE OF CONTENTS Table of Contents...1 1 Objective...2 2 VTI's 32-lead Dual In-line Package (DIL-32)...2 3 DIL-32 Package Outline and Dimensions...2
More informationASMB-KTF0-0A306-DS100
Data Sheet ASMB-KTF0-0A306 Overview The KTF0 is a series of tricolor LEDs in a PLCC-4 package. The package is (2.2 x 2.0) mm, and it is designed specifically for a small pitch display. The black outer
More informationASMB-TTF0-0A20B-DS101
Data Sheet ASMB-TTF0-0A20B Overview The ASMB-TTF0 is a tricolor PLCC6 LED with individually addressable pins for each color. It is designed specifically for outdoor full color display whereby the black
More informationR-1300-P PROGRAMMABLE ELECTRICAL MUFFLE KILN USER MANUAL
1 R-1300-P PROGRAMMABLE ELECTRICAL MUFFLE KILN USER MANUAL PRODUCT INTRODUCTION: The R-1300-P programmable, 1300 C / 2372 F electrical muffle kiln with a 32-segments temperature/time controller is especially
More informationPackage View SOT363. c L SOT363
PAKAE INFORMATION Mechanical Data Package View Surface Mount Package ase Material: Molded Plastic, UL Flammability lassification Rating 94V-0 Terminals: Finish Matte Tin Plated Leads, Solderable per MIL-STD-202,
More informationSensus LED Series. Pure White Targeted COB Arrays Below the Black Body Locus (BBL) Preliminary Data Sheet
Sensus LED Series Product Datasheet Sensus LED Series Pure White Targeted COB Arrays Below the Black Body Locus (BBL) Data Sheet Features: Table of Contents Technology Overview.... 2 Test Specifications...
More informationStandard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationInternal Compact Dual-Band Printed Loop Antenna for Mobile Phone Application
IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, VOL. 55, NO. 5, MAY 2007 1457 Internal Compact Dual-Band Printed Loop Antenna for Mobile Phone Application Yun-Wen Chi and Kin-Lu Wong Abstract A novel dual-band
More informationPosition Accuracy Machines for Selective Soldering Fine Pitch Components Gerjan Diepstraten Vitronics Soltec B.V. Oosterhout, Netherlands
As originally published in the IPC APEX EXPO Conference Proceedings. Position Accuracy Machines for Selective Soldering Fine Pitch Components Gerjan Diepstraten Vitronics Soltec B.V. Oosterhout, Netherlands
More information120 watts. High-Power: 99 Washington Street Melrose, MA Phone Toll Free Visit us at
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com High-Power: 120 watts weller-tools.com 1 2 WX A new era in soldering. weller-tools.com
More informationL40. Pneumatic linear slide L40
L40 Pneumatic linear slide High stiffness and deflection resistance. Up to 30kg on the carrier. Guidance with recirculating ball-bearings. Exclusive belt drive system. Hydraulic shock-absorbers on the
More informationGeneration 3 Sensus LED Series
Sensus LED Series Product Datasheet Generation 3 Sensus LED Series Pure White Targeted COB Arrays Below the Black Body Locus (BBL) Features: Matching the human perception of Pure white light Table of Contents
More informationV GG -V TO. rout = Saturation Region I OUT. Vout V SAT V GS V OUT. Sheet 1 of 10. Cascode Current Mirror
1 of 10 Cascode Current Mirror he main property/feature of a current source/sink is that the current though the device is independent of the voltage across it. Figure 1 shows the most basic of current
More informationPrecision Systems for the Electronics Bench PS-800 SOLDERING SYSTEM
Precision Systems for the Electronics Bench SOLDERING SYSTEM Soldering System The Second Technology Shift In Hand Soldering Driven by today s technologies and economic demands, Metcal s new Soldering System
More informationICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
More informationSolid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48 Zero switching AC Solid State Relay Direct copper bonding (DCB) technology in 25A and 40A types LED indication Clip-on IP 20 protection
More information4.5 Installation of PLUG N PLAY HR Systems with Threaded Nozzles
4.5 Installation of LUG N LY HR Systems with hreaded Nozzles ransport and lifting equipment should be operated only by trained personnel. Use personal protective equipment, such as head gear, safety shoes
More information电池柜 B32 Battery Cabinet B32. 安装说明 Installation Instruction
电池柜 B Cabinet B 安装说明 Installation Instruction 目录 Contents 一 概述 Summarize 二 电池柜的组成 cabinet composing 三 电池柜的安装步骤 Installation method 四 电池柜的接线图 The wiring diagrams for battery cabinet 敬请周知 操作之前, 请详细阅读使用手册,
More informationPractical Solutions for Successful Pb-Free Soldering. Brian Allder Qualitek-Europe
Practical Solutions for Successful Pb-Free Soldering Brian Allder Qualitek-Europe Challenges/Barriers to Lead Free Cost Material Availability Process Modifications Material Compatibility Standards Inspection
More informationASMT-YTD7-0AA02. Data Sheet. Tricolor PLCC6 White Surface LED. Description. Features. Applications
Data Sheet ASMT-YTD7-0AA02 Description This family of SMT LEDs is packaged in the form of PLCC-6 with a separate heat path for each LED die, enabling it to be driven at a higher current. Individually addressable
More informationIphone 5 Glass/Lcd REPAIR GUIDE. Version Edition
Iphone 5 Glass/Lcd REPAIR GUIDE Version 1 2016 Edition IPhone 5 Glass/LCd REPAIR GUIDE RiAna Soto Repair Training Specialist rsoto@cellairis.com FOR EVERY REPAIR MAKE SURE TO COMPLETE, INITIAL, AND HAVE
More informationInstallation Manual WIND TRANSDUCER
Installation Manual WIND TRANSDUCER Model FI-5001/FI-5001L This manual provides the instructions for how to install the Wind Transducer FI-5001/FI- 5001L. For connection to the instrument, see the operator
More informationMeasuring the performance of Knowledge Transfer from Universities to Industry in China. ZHONG Wei Renmin Univ
Measuring the performance of Knowledge Transfer from Universities to Industry in China ZHONG Wei Renmin Univ 1 Outline What is knowledge transfer, and how can it be measured? Surveys of Knowledge Transfer
More informationSoldering & De-soldering
Soldering and De-soldering Digital Electronics 04 Soldering & De-soldering This presentation will Review the tools needed to solder and de-solder electronic components. Demonstrate how to tin a soldering
More informationMULTILAYER HIGH CURRENT/HIGH FREQUENCY FERRITE CHIP BEAD
INTRODUCTION 產品介紹 Multilayer high current chip beads are SMD components that possess a low DC resistance. Their impedance mainly comprises resistive part. Therefore, when this component is inserted in
More informationLakeshore Hall Probe SOP Revision /16/18 Page 1 of 10. Lakeshore Hall Probe SOP
Page 1 of 10 Lakeshore Hall Probe SOP The Lake Shore 7507 Series Hall effect/electronic transport measurement system (HMS) is designed to measure electronic transport properties of electrically conductive
More informationModel 350C04. ICP Shock Accelerometer. Installation and Operating Manual
Model 350C04 ICP Shock Accelerometer Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-828-8840 24-hour SensorLine: 716-684-0001
More informationPoke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
More informationAVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
More informationSIM800H Module Manual Soldering User Guide
Document Title: SIM800H Module Manual Soldering User Guide Version: 1.14 Date: 2014-05-05 Status: Document Control ID: Release SIM800H Module Manual Soldering User Guide General Notes SIMCOM offers this
More information