IESNA LM79: 2008 Photometric Test Report

Transcription

1 IESNA LM79: 2008 Photometric Test Report Photometric Testing and Evaluation in Accordance with LM Report Prepared For Alex Truong Product Manager MaxLite Description of Sample: 100W LED AREA LIGHT RETROFIT LAMP 5000K E39 Model AR100LED50. The Sample (s) was (were) tested in accordance with the following applied standards/regulations: IESNA LM79: 2008 Approved for Electrical and Photometric Measurements of Solid-State Lighting Products. ANSI NEMA C78.377: 2011 Specification of the Chromaticity of Solid State Lighting Products. ANSI C82.77:2002 Harmonic Emissions Limits Related Power Quality Requirement for Light Equipment. CITL Test Number: CITL Sample Arrival Date: 10/17/2016 Date of Test: Report Issue Date: Report Prepared By: Report Approved By: Johnathan Taddei Lab Assistant Jun Xiang Lab Manager P a g e 1 7

2 Sample Number: 1839 Manufacturer: MaxLite Notes: Tested in intended orientation Equipment Used: Description Model # Serial # Calibration Date Calibration Due Date Goniophotometer GO-R5000 G116930CS /3/2016 2/7/2017 EVERFINE AC POWER SUPPLY DPS1060 G A YOKOGAWA POWER ANALYZER WT310 C2QJ22012V 10/22/ /31/2017 DC POWER SUPPLY WY12010 G115909TM EVERFINE AC POWER SUPPLY DSP1005 G119890CJ DC POWER SUPPLY WY305 G115986TA INTERGRATING SPHERE 2 METER CITL /7/ /7/2016 YOKOGAWA POWER ANALYZER WT310 C2QJ22011V 11/25/ /25/2016 FLUKE DIGITAL THERMOMETER 51II WS 3/4/2016 3/31/2017 TEMPERATURE AND HUMIDITY LOGGER UX /22/2016 3/31/2017 LM-79 Test Summary: Manufacture: Fixture Model Number: Driver Model Number: LED Model Number: MaxLite AR100LED50 No Driver Model Number Information Available No LED Model Number Information Available P a g e 2 7

3 Electrical Measurement: Input Voltage: 120VAC 277VAC Input Current: A A Input Frequency: 60 HZ 60 Hz Input Power: 99.55W 98.1W Power Factor: Total Harmonic Distortion: ATHD ATHD Lumen Output: Lumens: 11833Lm Efficacy: 119Lm/W Color Rendering Index *(CRI) Ra: 84.1 R₉: 16.0 Correlated Color Temperature (K): 5021K Chromaticity Coordinate x: Chromaticity Coordinate y: Ambient Temperature ( C): 25 C Stabilization Time (Hours): 60 Mins Total Operation Time (Hours): 3 Hrs. u/u : V : Duv: Center Beam Candle Power (cd): Max Candela(cd): 4,278.7 at Horizontal: 105, Vertical: 2.5 Spacing Criteria (0-180) 1.30 Spacing Criteria (90-270) 1.32 Zonal Lumens in the 0-60 Zone 9,760.7Lm 82.5% Zonal Lumens in the Zone 2,057.1Lm 17.4% Zonal Lumens in the 0-90 Zone 11,817.7Lm 99.9% Zonal Lumens in the Zone 2.4Lm 0.0% Zonal Lumens in the Zone 12.2Lm 0.1% P a g e 3 7

4 Test Methods: Photometric Measurements Goniophotometer: An Everfine Type C Rotating Mirror Goniophotometer was used to measure candelas (intensity) at each angle of distribution as defined by IESNA for the appropriate fixture type. Ambient temperature is set to 25 C and is measured from the center of the fixture, within 1ft from the outside of the fixture. Temperature is maintained at 25 C throughout the testing process and the sample is stabilized for at least 60 minutes and longer as necessary for the sample to achieve stabilization. Electrical measurements are measure using the listed equipment. Spectral Measurements Integrating Sphere A sensing Spectrometer HASS-2000, in conjunction with Everfine 2 meter integrating sphere was used to measure chromaticity coordinates, correlated color temperature (CCT) and the color rendering index (CRI) for each sample. Test Geometry Configuration 4 π. Ambient temperature is set to 25 C and is measured from the center of the fixture, within 1ft from the outside of the fixture. Temperature is maintained at 25 C throughout the testing process and the sample is stabilized for at least 30 min and longer if necessary for the sample to achieve stabilization Electrical measurements are measured using the listed equipment. LUMINAIRE PHOTOMETRIC TEST REPORT: P a g e 4 7

5 ZONAL FLUX DIAGRAM: P a g e 5 7

6 ISOCANDELA DIAGRAM: ISOLUX DIAGRAM: P a g e 6 7

7 AAI DIAGRAM: ***End of Report*** P a g e 7 7