CDGT W Grass Trimmer. Read all instructions before use. User Guide

Size: px
Start display at page:

Download "CDGT W Grass Trimmer. Read all instructions before use. User Guide"

Transcription

1 CDGT Read all instructions before use

2 IMPORTANT SAFETY INFORMATION Thank you for purchasing the 250W Tesco Grass Trimmer. For your safety, please read this carefully, paying close attention to the Safety Guide section. Keep this with the Grass Trimmer. Safety Instructions Intended Use: The Grass Trimmer is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the Grass Trimmer by a person responsible for their safety. Children should be supervised to ensure that they do not play with the Grass Trimmer. The Grass Trimmer is designed for the cutting of grass and weeds under bushes and on slopes / edges that cannot be reached with a lawnmower. It is intended for use in private households and as a hobby device in the garden. Any other utilisation, which is not explicitly approved in these directions, can lead to damage to the Grass Trimmer and represent a serious danger to the user. 1) Training Read the instructions carefully. Be familiar with the controls and the correct use of the Grass Trimmer. Never allow children to use the Grass Trimmer. Never allow people unfamiliar with these instructions to use the Grass Trimmer. Local regulations may restrict the age of the operator. Never operate the Grass Trimmer while people, especially children, or pets are nearby. The operator or user is responsible for accidents or hazards occurring to other people or their property. 2) Work Area Keep your work area tidy and well lit. Keep children and bystanders at least 5m away while operating the Grass Trimmer. Ensure that the area being cut is free from string, wire, cables, stone and debris. 3) Electrical Safety It is strongly recommended that mains power be supplied to the Grass trimmer through a Residual Current Device (RCD) having a rated residual current rating not exceeding 30mA. Do not modify the plug in any way. Do not touch earthed or grounded surfaces such as pipes or radiators while using the Grass Trimmer. There is an increased risk of of electric shock if your body is earthed or grounded. Do not expose the Grass Trimmer to water, or use in wet conditions. Water in the Grass Trimmer increases the risk of electric shock. Only use an extension cable that is suitable for outdoor use. Do not carry or pull the Grass Trimmer by the power cable. Never pull on the power cable to unplug the Grass Trimmer. Keep the power cable away from heat, oil, sharp edges and moving parts. Damaged or entangled power cables increase the risk or electric shock. Before use check the power and extension cable for signs of damage and ageing. If the cord becomes damaged during use, disconnect the cord from the supply immediately. Do not touch the cable before disconnecting the supply. Do not use the Grass Trimmer if the power or extension cable is damaged or worn. If the power cable is damaged, it must be replaced by suitably qualified personnel. 4) Personal Safety Do not use the Grass Trimmer while you are tired or under the influence of alcohol, drugs or medication. Wear protective goggles, sturdy gloves, dust mask and substantial, non-skid footwear while operating the Grass Trimmer. Wear suitable hearing protection such as ear defenders or ear plugs when operating the Grass Trimmer. Avoid accidental starting. Ensure that the switch is in the Off position before plugging in. Do not wear loose clothing or jewellery that can be caught in moving parts. Keep long hair away from any part of the Grass Trimmer. Always ensure that any openings are clear of debris. 5) Use and Care Do not force the Grass Trimmer, only use for the intended application. Do not use the Grass Trimmer if the switch does not turn it on and off. Disconnect the Grass Trimmer from the power source before making any adjustments, changing accessories or storing. Store the Grass Trimmer out of reach of children and persons unfamiliar with its use. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the operation of the Grass Trimmer ) Service Refer all servicing which involves the taking or putting on of parts (other than those specifically referred to in this manual), to a qualified person or approved service agent. 7) Operation Avoid using the Grass Trimmer in bad weather conditions especially when there is risk of lightning. Only use the Grass Trimmer in daylight or good artificial light. Before using the Grass Trimmer and after any impact, check for signs of wear or damage and repair as necessary. Never use replacement parts or accessories not provided or recommended by the manufacturer. Disconnect the Grass Trimmer from mains before checking, cleaning or working on it and when it is not in use. Never operate the Grass Trimmer when you are tired, ill or under the influence of alcohol, drugs or medicine. When the Grass Trimmer is in operation, keep the cutting section away from all parts of the body, especially hands and feet. Do not start the Grass Trimmer when it is upside down or not in the operating position. Switch the Grass Trimmer off and pull out the plug when it is not being used, left unattended, being cleaned, transported or adjusted. If there is an interruption to the power supply or the extension cable is damaged, switch off the Grass Trimmer and remove the plug from the power supply. Keep a balanced and stable stance when using the Grass Trimmer. Do not overreach. Do not cut against hard objects. This could cause injury to the operator and damage the Grass Trimmer. Never use the Grass Trimmer without a guard or if the guard is damaged.

3 Only use the original type of nylon line. Under no circumstances use metal line instead of nylon. Do not use the Grass Trimmer to cut grass that is not on the ground. For example, grass that is on walls or rocks. Before use check that all grass cuttings and debris have been removed from the ventilation vents. Do not cross roads or gravel paths when the Grass Trimmer is running. After use disconnect the Grass Trimmer from the power supply and check for damage. Contact an authorised service agent if you are in any doubt. Never hold or operate the Grass Trimmer by the guard. Check regularly that the fixtures, fittings and screws are tight. Walk, never run. The guard is vital for your and other people s safety and for the Grass Trimmer s operating efficiency. Do not try to stop the cutting device (nylon line) with your hands or feet. Always let it come to a stop by itself. WARNING: Cutting elements continue to rotate after the motor is switch off 4) Maintenance and Storage Replace worn or damaged parts. Use only genuine replacement parts and accessories. Store the Grass Trimmer in a dry place. Refer all servicing which involves the taking or putting on of parts (other than those specifically referred to in this manual), to a qualified person or approved service agent. Do not use harsh abrasives, or caustic cleaners when cleaning the Grass Trimmer. Electrical Information Before use check that the voltage of your electricity supply is the same as that shown on the rating plate of the Grass Trimmer. In the UK this is volts. If the supply cord is damaged, it must be replaced by a qualified person or approved service agent. Warning: Keep extension cords away from cutting elements. The power cord is terminated with a UK approved mains plug fitted with a 5A fuse. If the fuse needs to be replaced, an ASTA or BSI approved BS1362 fuse rated at 5A must be used. If you change the mains plug, remove the fuse and dispose of the old plug safely and immediately after cutting it from the power cord. The wires in the mains lead are coloured in accordance with the code: Blue: Neutral Brown: Live If these colours do not correspond to the those found in your plug, do as follows: The wire coloured BLUE or BLACK must be connected to the terminal marked with the letter N. Health and Safety Symbols Model Number: Voltage Caution: The Grass Trimmer should be operated only by those who have read and understood all the safety and operating instructions in this manual. Mind the safety of people present in the area any time. Read the instruction manual Do not expose to rain or moisture CDGT V~50Hz The product complies with the applicable European directives and an evaluation method of conformity for these directives was done. Disconnect the mains plug if the cord is damaged or entangled Double Insulation Keep bystanders away The wire coloured BROWN or RED must be connected to the terminal marked with the letter L. 4 5 Power: Wear safety goggles Wear ear protectors Specifications: 250W Speed: / min Trimmer Line Feed-Out: Tap & Go Cutting Circle: 205 mm Trimmer Line 1.4 mm diameter Weight 1.7 Kg LpA: (Guaranteed Sound 76 db(a) K = 3dB(A) Pressure Level): LwA: (Guaranteed Sound 96 db(a) Power Level): Aw: (Vibration Level) m/s 2 K = 1.5 m/s 2

4 The Introduction This provides instructions on the correct assembly and safe use of the 250W Grass Trimmer. Handle On/Off Switch The is designed for the cutting of grass and weeds under bushes and on slopes / edges that cannot be reached with a lawn mower. It is intended for use in private households and as a hobby device in the garden. Power Cable Assembly Handle Locking Screw On/Off Trigger Assembling the Body of the Grass Trimmer fig Push the Upper Body Section into the Lower Body Section (fig. 1) until the 2 sets of holes line up. Cable Hook Upper Body 2. Place the nut provided into the hexagonal groove on the Main handle. fig. 2 Trimmer Head Lower Body 3. Push the locking screw through the circular hole in the Main Handle and tighten until secure. (fig. 2). Cutting Guard Cover Fitting the Cutting Guard Cover Beware of the sharp blade on the Cutting Guard Cover. Locking Screw Line Spool 1. Fit the Cutting Guard Cover to the Trimmer Head so that the square hole on the Cutting Guard Cover clips onto the notch on the Trimmer Head (fig. 3). fig Ensure that the screw hole on the Cutting Guard Cover lines up with the hole on the Trimmer Head. 6 7

5 3. Insert the screw provided into the hole on the Cutting Guard Cover and tighten using a suitable screwdriver. (fig. 4). fig. 4 Tips for Using the Grass Trimmer Always be aware of the position of the power cable when using the Grass Trimmer. Keep the Power Cable to your back and out of the way of the cutting path. Take extra care when changing direction. Operating the Grass Trimmer Trimming Grass and Weeds 1. Ensure that the Grass Trimmer is connected to the mains power supply. Firmly grip both handles. Sweep the Grass Trimmer left and right. Keep the cutting head level with the ground (fig. 7). Fig Stand upright and hold the Grass Trimmer in a relaxed position away from your body. Do not rest the cutting head on the ground. Hold it above the grass. 3. To turn the Grass Trimmer On press the On/ Off switch while pressing the On/Off Trigger (fig. 5). For continuous operation release the On/Off button and hold the On/Off trigger. fig. 5 On/Off Switch Cut small patches of grass and weeds. The Grass Trimmer is not suitable for cutting large areas. Where possible cut with the left-hand side of the Grass Trimmer so that cuttings, dust and stones are thrown forwards, away from the user. Ideal working conditions will be achieved when the Grass Trimmer is tilted at an angle of To turn the Grass Trimmer Off release the On/Off trigger. On/Off Trigger Trimming Lawn Surfaces Cable Restraint A cable restraint has been included to prevent a cable snag from damaging the connections to the Grass Trimmer. fig. 6 Hold the Grass Trimmer in front of you at an inclined angle of 30 0 with the Cutting Head level with the ground. Guide the Grass Trimmer in a semi circular motion around your starting position. For a good cutting performance do not use on grass higher than 15 cm. Cut taller grass down in gradual stages. Create a loop in the mains cable, feed it up through the slot in the restraint and loop over the hook (fig. 6). 8 9

6 Adjusting the Nylon Cutting Line Care and Maintenance The nylon cutting line can wear or break preventing the Grass Trimmer from cutting. Taking Care of the Grass Trimmer 1. To change the length of the nylon cutting line press and release the Grass Trimmer on the ground or a solid surface while operating. This will cause the spool to release the line. 2. The Grass Trimmer has a blade that continuously cuts the line down to the appropriate length. Replacing the Nylon Line Spool If the nylon cutting line is broken and the nylon spool needs replacing: fig. 8 Always disconnect the plug from the power socket before carrying out any cleaning or maintenance work on the Grass Trimmer. Never clean or splash the Grass Trimmer with water. Store the Grass Trimmer in a dry, frost free area, out of reach of children. Carefully remove grass and debris by using a suitable brush or blunt scraping tool. Clean the inside and outside of the protective cover after use and wipe with a moist sponge. If the visible nylon cutting string is shorter than 2.5 cm, adjust and replace the string. Maintenance 1. Press the two release clips on the side of the Line Spool cover and pull to remove, taking care not to dislodge the spring (fig. 8). 2. Thread the new/refilled spool through the two eyeholes in the Trimmer Head. 3. Insert the nylon disc so that it sits on the spring (fig. 9). fig. 9 Always keep the Grass Trimmer clean. Do not use caustic cleaning agents to clean the plastic housing. Get the Grass Trimmer checked by a qualified person or approved service agent if an excessive amount of sparks are generated when in use. Do not allow water to come into contact with the Grass Trimmer. 4. Line up the release clips of the spool cover with the holes on the Trimmer Head and push so that the spool cover clicks into position

7 Troubleshooting Ensure that the Grass Trimmer is switched Off and unplugged from the mains before investigating any faults. The table below offers advice and solutions for the most common type of faults. Symptom Possible Cause Solution Grass Trimmer fails to operate Power turned Off Mains socket faulty Turn power on at the mains Try another socket Grass Trimmer Works intermittently Damaged extension cable Grass Trimmer damaged Replace extension cable if damaged Contact service agent Grass in not being cut Grass too high Cut in 15 cm stages Line cannot be fed Spool is empty Replace the spool Line entangled within the spool Inspect the spool. Rewind if required Line keeps breaking Line entangled within the spool Inspect the tool, Rewind if required 12 13

8 Warranty This appliance is intended only for household use. It must be properly installed and operated in accordance with these instructions. Failure to do this will invalidate the warranty. Your Tesco appliance is covered by a warranty for 12 months from the date of purchase. If a fault develops during this period, please contact the Tesco help line on Please have your original purchase receipt with you when you call. This warranty in no way affects your consumer rights. UK: Waste products should not be disposed of with household waste. Separate disposal facilities exist, for your nearest facilities see www. recycle-more.co.uk or in-store details. ROI: Produced after 13th August Waste products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice. Tesco Stores Ltd, Delamare Road, Cheshunt, Herts, EN8 9SL UK TESCO Stores Ltd, Cheshunt, EN8 9SL, UK. Produced in China. RY811/dcsJuly08

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire

More information

SAFETY AND OPERATING MANUAL. Hedge Trimmer WG205E WG206E WG207E WG208E

SAFETY AND OPERATING MANUAL. Hedge Trimmer WG205E WG206E WG207E WG208E SAFETY AND OPERATING MANUAL 2 PRODUCT SAFETY GENERAL Power Tool Safety Warnings WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or

More information

KR703-XE KR704-XE KR705-XE KR753-XE KR754-XE KR755-XE Australia New Zealand

KR703-XE KR704-XE KR705-XE KR753-XE KR754-XE KR755-XE Australia New Zealand 6 5 4 www.blackanddecker.com.au 3 7 2 1 8 KR703-XE KR704-XE KR705-XE KR753-XE KR754-XE KR755-XE Australia New Zealand 7 8 A 12 13 10 9 10 B C 11 7 8 D E 2 Intended use Your Black & Decker hammer drill

More information

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880

More information

SAFETY AND OPERATING MANUAL. 750W/13mm IMPACT DRILL JM750ID

SAFETY AND OPERATING MANUAL. 750W/13mm IMPACT DRILL JM750ID SAFETY AND OPERATING MANUAL 750W/13mm IMPACT DRILL JM750ID GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DS4012 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DS4012 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill DS402 05402 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DS402 Capacities Steel 3 mm Wood

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL Impact drill WX317 WX318 1 3 2 8 7 6 5 4 A1 A2 B C1 2 1 3 3 1 D C2 5 4 E F 2 E F 1 G 4 2 H 1. Keyless Chuck 2. Depth gauge 3. Drill/hammer drill function selector 4. Switch

More information

Drill INSTRUCTION MANUAL. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE 1 REFERENCE.

Drill INSTRUCTION MANUAL. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE 1 REFERENCE. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill 6411 6412 6413 007894 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE

More information

MINI RECIPROCATING SAW MODEL NO: CRS350M

MINI RECIPROCATING SAW MODEL NO: CRS350M CRS350M - Mini Reciprocating saw.fm Page 1 Thursday, November 22, 2012 9:41 AM MINI RECIPROCATING SAW MODEL NO: CRS350M PART NO: 6462550 OPERATION & MAINTENANCE INSTRUCTIONS LS1112 CRS350M - Mini Reciprocating

More information

Impact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Impact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Impact Wrench MODEL TW000 00605 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

Operating Manual 6 Industrial Bench Grinder ATBG280/

Operating Manual 6 Industrial Bench Grinder ATBG280/ Operating Manual 6 Industrial Bench Grinder ATBG280/6 804531 40 Year Australian Heritage The reputable name in bench grinders for 40 years Protect yourself and others by observing all safety information,

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill 64 642 643 007894 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 64 642 643 Capacities Steel

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MT600 MT601 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MT600 MT601 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill MT600 MT60 003635 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MT600 MT60 Capacities Steel

More information

SAFETY AND OPERATING MANUAL 135W PALM SANDER JM135PS

SAFETY AND OPERATING MANUAL 135W PALM SANDER JM135PS SAFETY AND OPERATING MANUAL 135W PALM SANDER JM135PS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result

More information

18V CORDLESS STAPLER/NAILER

18V CORDLESS STAPLER/NAILER 18V CORDLESS STAPLER/NAILER MODEL NO: CONSN18LIC PART NO: 6487058 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0717 ISS2 2 INTRODUCTION Thank you for purchasing this CLARKE product. Before

More information

Impact Wrench MODEL 6905B MODEL 6906

Impact Wrench MODEL 6905B MODEL 6906 ENGLISH Impact Wrench MODEL 6905B MODEL 6906 005305 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Shear Wrench 6922NB DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Shear Wrench 6922NB DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Shear Wrench 69NB 00498 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 69NB Bolt size M6, M0, M

More information

Impact Wrench. 19 mm (3/4 ) MODEL 6906

Impact Wrench. 19 mm (3/4 ) MODEL 6906 Impact Wrench 9 mm (3/4 ) MODEL 6906 002290 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

High Speed Drill MODEL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

High Speed Drill MODEL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH High Speed Drill MODEL 6501 003002 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL BladeRunner X2 WX572 9 10 8 11 5 7 12 6 20 1 2 4 3 14 13 15 A2 A1 17 18 B2 B1 1 2 1 2 19 B3 3 4 2 C 1 D1 D1 C 2 1 E1 D2 1 2 E2 1 2 F G1 G1 F OFF ON G2 G3 H1 H2 I1 I2 I1 I2 J

More information

Nibbler MODEL JN1601. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Nibbler MODEL JN1601. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Nibbler MODEL JN60 00477 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. SPECIFICATIONS

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Curved Planer 1002BA DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Curved Planer 1002BA DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Curved Planer 00BA 0059 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 00BA Planing width 0 mm Planing

More information

ROTARY HAMMER OWNER'S MANUAL

ROTARY HAMMER OWNER'S MANUAL ROTARY HAMMER OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal

More information

SDS+ ROTARY HAMMER DRILL

SDS+ ROTARY HAMMER DRILL SDS+ ROTARY HAMMER DRILL MODEL NO: CON400RHD PART NO: 6479510 OPERATION & MAINTENANCE INSTRUCTIONS LS0812 INTRODUCTION Thank you for purchasing this CLARKE SDS+ Rotary Hammer Drill. Before attempting to

More information

Auto Feed Screwdriver

Auto Feed Screwdriver ENGLISH Auto Feed Screwdriver MODEL 6833 MODEL 6834 MODEL 6836 002607 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE

More information

ATD AMP Variable Speed Reciprocating Saw Owner s Manual

ATD AMP Variable Speed Reciprocating Saw Owner s Manual ATD-10535 7 AMP Variable Speed Reciprocating Saw Owner s Manual Manufactured in China To ATD Tools, Inc. Specifications TECHNICAL SPECIFICATIONS Voltage: 120V Frequency: 60Hz Power input: 7 Amps No load

More information

MULTI FUNCTION SHARPENER

MULTI FUNCTION SHARPENER WHAT S IN THE BOX MULTI FUNCTION SHARPENER 65W INSTRUCTION MANUAL SPECIFICATIONS Motor: 65W No Load Speed: 6,700/min Wheel Diameter: 49mm (2 ) Sharpening Capacity Drill bit: 3-10mm Blade: 6-51mm Weight:

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL 2 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire

More information

2-Speed Hammer Drill HP2000 HP2020

2-Speed Hammer Drill HP2000 HP2020 2-Speed Hammer Drill HP2000 HP2020 SPECIFICATIONS Model HP2000 HP2020 Speed High Low High Low Capacities Concrete 20 mm 20 mm Steel 6.5 mm 13 mm 6.5 mm 13 mm No load speed (min 1 ) 0 2,300 0 900 2,300

More information

20V CORDLESS RECIPROCATING SAW MODEL NO: CRS20Li

20V CORDLESS RECIPROCATING SAW MODEL NO: CRS20Li 20V CORDLESS RECIPROCATING SAW MODEL NO: CRS20Li PART NO: 6487020 OPERATION & MAINTENANCE INSTRUCTIONS LS1013 INTRODUCTION Thank you for purchasing this CLARKE 20V Cordless Reciprocating Saw. Before attempting

More information

5 FUNCTION ROTARY HAMMER DRILL

5 FUNCTION ROTARY HAMMER DRILL 5 FUNCTION ROTARY HAMMER DRILL MODEL NO: CONRHD720 PART NO: 6480215 OPERATION & MAINTENANCE INSTRUCTIONS LS0712 INTRODUCTION Thank you for purchasing this CLARKE 5 Function Rotary Hammer Drill. Before

More information

Angle Grinder MODEL 9553B MODEL 9555B

Angle Grinder MODEL 9553B MODEL 9555B ENGLISH Angle Grinder MODEL 9553B MODEL 9555B 006649 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR

More information

Electric Chainsaw Sharpener

Electric Chainsaw Sharpener FPP CHAINSS Electric Chainsaw Sharpener Instruction Manual For your own safety, please ensure you have read these instructions before use and have fully understood all the safety guidelines. Specifications

More information

Drill MODEL 6013B MODEL 6013BR. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Drill MODEL 6013B MODEL 6013BR. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Drill MODEL 6013B MODEL 6013BR 004618 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE

More information

WARRANTY YEARS ERB900 BISCUIT JOINTER

WARRANTY YEARS ERB900 BISCUIT JOINTER ERB900 WARRANTY YEARS Congratulations on your purchase of a quality power tool from Screwfix Direct Ltd. This product should give you reliable service but for your peace of mind this power tool does carry

More information

GENERAL OPERATIONAL PRECAUTIONS

GENERAL OPERATIONAL PRECAUTIONS GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS MULTI FUNCTION TOOL WITH QUICK RELEASE MODEL NO: CMFT300QR PART NO: 6462201 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0418 - ISS 2 INTRODUCTION Thank you for selecting this Clarke Multi

More information

Handling instructions

Handling instructions Hand Shear Model CE 16SA Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that

More information

Circular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Circular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Circular Saw MODEL MT58 005337 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

2-Speed Hammer Drill HP2030 HP2031 INSTRUCTION MANUAL

2-Speed Hammer Drill HP2030 HP2031 INSTRUCTION MANUAL ENGLISH (Original instructions) INSTRUCTION MANUAL 2-Speed Hammer Drill HP2030 HP203 002466 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS

More information

SAFETY AND OPERATING MANUAL 200W 1/3 SHEET SANDER JM200FS

SAFETY AND OPERATING MANUAL 200W 1/3 SHEET SANDER JM200FS SAFETY AND OPERATING MANUAL 200W 1/3 SHEET SANDER JM200FS 2 GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may

More information

Handling instructions

Handling instructions Nibbler Model CN 16SA Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these

More information

Jigsaw Kit. Operating and Safety Instructions AJA300

Jigsaw Kit.  Operating and Safety Instructions AJA300 Jigsaw Kit AJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation of this

More information

1/4in. SHEET PALM SANDER

1/4in. SHEET PALM SANDER 1/4in. SHEET PALM SANDER OPERATING INSTRUCTIONS SPECIFICATIONS ITEM# 151608 Voltage: Max. output: No load speed: Cord: 120V ~ 60Hz 180W 14000 RPM 6 feet (2m) Dust-Sealed On/off Switch Dust Extraction Adaptor

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MDP303 MDP304 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MDP303 MDP304 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill MDP303 MDP304 0876 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MDP303 MDP304 Capacities

More information

Angle Drill MODEL DA3000R MODEL DA3000V

Angle Drill MODEL DA3000R MODEL DA3000V ENGLISH Angle Drill MODEL DA3000R MODEL DA3000V 003004 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Impact Wrench 6904VH 6905H DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Impact Wrench 6904VH 6905H DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Impact Wrench 6904VH 6905H 005299 DOUBLE INSULATION IMPORTANT: Read Before Using. 1 ENGLISH (Original instructions) SPECIFICATIONS Model 6904VH 6905H

More information

Impact Wrench 6904VH 6905H INSTRUCTION MANUAL

Impact Wrench 6904VH 6905H INSTRUCTION MANUAL ENGLISH (Original instructions) INSTRUCTION MANUAL Impact Wrench 6904VH 6905H 005299 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill MHP161 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill MHP161 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Hammer Drill MHP6 0088 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MHP6 Concrete 6 mm Capacities

More information

MULTI-PURPOSE SAW MODEL NO. OZMPS500A OPERATING INSTRUCTIONS

MULTI-PURPOSE SAW MODEL NO. OZMPS500A OPERATING INSTRUCTIONS MULTI-PURPOSE SAW 500watt MODEL NO. OZMPS500A OPERATING INSTRUCTIONS To view our entire range visit www.ozito.com.au SPECIFICATIONS - MODEL NO. OZMPS500A Motor: Input: No load speed: Length of stroke:

More information

GUILD 1000W Rotary Hammer

GUILD 1000W Rotary Hammer GUILD 1000W Rotary Hammer Instruction Manual PDH26G After Sales Support UK/Ireland 0333 3201989 Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill HP1630 HP1631 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill HP1630 HP1631 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Hammer Drill HP630 HP63 008892 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model HP630 HP63 Concrete

More information

GENERAL POWER TOOL SAFETY WARNINGS

GENERAL POWER TOOL SAFETY WARNINGS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Recipro Saw JR3050T DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Recipro Saw JR3050T DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Recipro Saw JR3050T 005783 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model JR3050T Length of stroke

More information

Auto Feed Screwdriver

Auto Feed Screwdriver ENGLISH (Original instructions) INSTRUCTION MANUAL Auto Feed Screwdriver 684 6843 6844 6846 0080 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 684

More information

Handling instructions

Handling instructions Orbital Sander Model SV 12SG Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended

More information

CD714RE CD714CRE CD714CRES KR604CRES KR654CRES KR714CRES.

CD714RE CD714CRE CD714CRES KR604CRES KR654CRES KR714CRES. 4 6 5 7 3 1 2 www.blackanddecker.co.uk CD714RE CD714CRE CD714CRES KR604CRES KR654CRES KR714CRES English (Original instructions) 5 2 7 A B 10 11 12 14 15 12 C D 11 3 E F 3 6 7 G 4 Intended use Your Black

More information

Automatic Screwdriver Model W 4YD. Handling instructions

Automatic Screwdriver Model W 4YD. Handling instructions Automatic Screwdriver Model W 4YD Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended

More information

GENERAL OPERATIONAL PRECAUTIONS

GENERAL OPERATIONAL PRECAUTIONS GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Straight Shear JS1660 JS1670 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Straight Shear JS1660 JS1670 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Straight Shear JS660 JS670 004666 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model JS660 JS670 Steel

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill 6402 DP4700 DP4700 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill 6402 DP4700 DP4700 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill 6402 DP4700 6402 DP4700 00465 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 6402 DP4700 Capacities

More information

SAFETY AND OPERATING MANUAL 700W JIGSAW JM700JS

SAFETY AND OPERATING MANUAL 700W JIGSAW JM700JS SAFETY AND OPERATING MANUAL 700W JIGSAW JM700JS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in

More information

Handling instructions

Handling instructions Impact Drill Model DV 8V Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that

More information

Finger Jointer. Operating and Safety Instructions FJA300

Finger Jointer.  Operating and Safety Instructions FJA300 Finger Jointer FJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation

More information

GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

Impact Wrench WR 22SA HANDLING INSTRUCTIONS. Read through carefully and understand these instructions before use.

Impact Wrench WR 22SA HANDLING INSTRUCTIONS. Read through carefully and understand these instructions before use. Impact Wrench WR 22SA HANDLING INSTRUCTIONS Read through carefully and understand these instructions before use. 1 1 2 2 3 4 5 3 6 7 8 9 5 3 4 kg-m 80 N m 800 M22 70 (F 10T) 0 C 70 700 60 50 600 500 40

More information

Dust Collector. Model No: DC2200 (FM300S)

Dust Collector. Model No: DC2200 (FM300S) Dust Collector Model No: DC2200 (FM300S) GENERAL SAFETY INSTRUCTIONS Before attempting to operate this machine, it is important that you read, understand and follow these instructions very carefully. They

More information

HANDLING INSTRUCTIONS

HANDLING INSTRUCTIONS Demolition Hammer Model: XP-G55VA HANDLING INSTRUCTIONS Before using this demolition hammer, please carefully read though these HANDLING INSTRUCTIONS. Ensure that you know how the machine works, and how

More information

BB Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

BB Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. BB07552 5 Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Finishing Sander BO4553 BO4561 BO4563 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Finishing Sander BO4553 BO4561 BO4563 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Finishing Sander BO4553 BO456 BO4563 00449 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model BO4553

More information

COJSAWBX Electric Jig Saw Assembly & Operating Instructions

COJSAWBX Electric Jig Saw Assembly & Operating Instructions COJSAWBX Electric Jig Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance.

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL 600W PRECISION TILE CUTTER Congratulations on your purchase of a power tool from Screwfix Direct Ltd. We want you to continue getting the best performance from it so this handbook

More information

1800W VARIABLE SPEED ROUTER

1800W VARIABLE SPEED ROUTER 1800W VARIABLE SPEED ROUTER MODEL NO: CR3 PART NO: 6462081 OPERATION & MAINTENANCE INSTRUCTIONS LS1111 INTRODUCTION Thank you for purchasing this CLARKE 1800W Variable Speed Router. Before attempting to

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Nibbler JN1601 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Nibbler JN1601 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Nibbler JN60 0077 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model JN60 Steel up to 00 N/mm.6 mm /

More information

Hedge Trimmer. 450 Watt. HT-501. To view the full range visit: Operation Manual 2 Year Replacement Warranty

Hedge Trimmer. 450 Watt.  HT-501. To view the full range visit: Operation Manual 2 Year Replacement Warranty Hedge Trimmer 450 Watt Operation Manual 2 Year Replacement Warranty HT-501 To view the full range visit: www.ozito.com.au 0109 SPECIFICATIONS - MODEL NO. HT-501 Motor size: Input: No load speed: Blade

More information

Hand Push Cylinder Mower

Hand Push Cylinder Mower Hand Push Cylinder Mower GT5614 OPERATING INSTRUCTIONS Sep 2014 Rev A INTRODUCTION Thank you for purchasing a Hand Push Cylinder Mower. We would you like to be completely satisfied with your new product

More information

Recipro Saw MODEL JR3000V. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Recipro Saw MODEL JR3000V. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Recipro Saw MODEL JR3000V 00477 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL 0 1 2.0 1.5 0.5 0 SAFETY AND OPERATING MANUAL 2mm PLANER Congratulations on your purchase of a power tool from Screwfix Direct Ltd. We want you to continue getting the best performance from it so this

More information

GUILD 135W Detail Sander

GUILD 135W Detail Sander GUILD 135W Detail Sander Instruction Manual PPS135G After Sales Support UK/Ireland 0333 3201989 Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining

More information

2600W ANGLE GRINDER MODEL NO: CON2600 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0415

2600W ANGLE GRINDER MODEL NO: CON2600 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0415 2600W ANGLE GRINDER MODEL NO: CON2600 PART NO: 6470145 OPERATION & MAINTENANCE INSTRUCTIONS LS0415 INTRODUCTION Thank you for purchasing this CLARKE 2600W Angle Grinder. Before attempting to use this product,

More information

ELECTRIC STAPLE NAIL GUN

ELECTRIC STAPLE NAIL GUN WHAT S IN THE BOX ELECTRIC STAPLE NAIL GUN 8MM - 14MM INSTRUCTION MANUAL SPECIFICATIONS Input: 230-240V ~ 50Hz Power: 45W Impact Rate: 30/min Staple Size: 8-14mm, Type 50 Nail Size: 15mm, C1 Brad Magazine

More information

Tile Cutting Saw 600W. OZTCS600WA. To view the full range visit: Instruction Manual 3 Year Replacement Warranty

Tile Cutting Saw 600W.  OZTCS600WA. To view the full range visit: Instruction Manual 3 Year Replacement Warranty Tile Cutting Saw 600W Instruction Manual 3 Year Replacement Warranty OZTCS600WA! WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL 7kg SDS PLUS ROTARY HAMMER Congratulations on your purchase of a power tool from Screwfix Direct Ltd. We want you to continue getting the best performance from it so this handbook

More information

18 PIECE HOLE SAW SET

18 PIECE HOLE SAW SET 18 PIECE HOLE SAW SET 94665 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER

INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER INSTRUCTION BOOKLET AND WARRANTY INFORMATION 6 BENCH GRINDER Part No.: SW1250 PLEASE READ CARE AND SAFETY INSTRUCTIONS BEFORE USE SPECIFICATIONS Part No.: SW1250 Input Voltage: 240V Frequency: 50Hz Rated

More information

Recipro Saw MODEL JR3020. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Recipro Saw MODEL JR3020. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Recipro Saw MODEL JR3020 002479 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

Handling instructions

Handling instructions Impact Drill Model DV 20VB2 Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended

More information

UK Subject to change PAG-125/1020 Angle Grinder

UK Subject to change PAG-125/1020 Angle Grinder Subject to change www.servotool.nl 0511-09 USERS MANUAL Art.nr.AGM6010 PAG-125/1020 Angle Grinder 3 6 5 2 4 1 Fig. A 8 7 12 2 6 Fig. B Fig. D Fig. C Fig. E 2 Powercraft EXPLODED VIEW Powercraft 15 SPARE

More information

planer/thicknesser 200 x 120mm

planer/thicknesser 200 x 120mm instructions for planer/thicknesser 200 x 120mm model no: sm1311 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,

More information

Power Planer 1900B/N1900B/1902

Power Planer 1900B/N1900B/1902 Power Planer 1900B N1900B 1902 SPECIFICATIONS Model 1900B/N1900B/1902 Planing width... 82 mm Planing depth... 1 mm Shiplapping depth... 9 mm No load speed (min -1 )...16,000 Overall length... 290 mm Net

More information

Power Planer JCB-PP1050

Power Planer JCB-PP1050 Safety and operating manual Power Planer JCB-PP1050 ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and

More information

Instruction Manual DETAIL SANDER. Model SROM Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools.

Instruction Manual DETAIL SANDER. Model SROM Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. Instruction Manual DETAIL SANDER Model SROM 1187 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. Product Features: 1. On/Off Switch 2. Base Pad 3. Dust

More information

SAFETY AND OPERATING MANUAL ERBAUER 750W TILE CUTTER

SAFETY AND OPERATING MANUAL ERBAUER 750W TILE CUTTER ERB337TCB SAFETY AND OPERATING MANUAL WARRANTY YEARS Original Instructions Congratulations on your purchase of a quality power tool from Erbauer (UK) Ltd. This product should give you reliable service

More information

185MM CIRCULAR SAW MODEL NO: CCS185B

185MM CIRCULAR SAW MODEL NO: CCS185B CCS185B Circular Saw.fm Page 1 Wednesday, June 19, 2013 11:39 AM 185MM CIRCULAR SAW MODEL NO: CCS185B PART NO: 6462310 OPERATION & MAINTENANCE INSTRUCTIONS LS0613 CCS185B Circular Saw.fm Page 2 Wednesday,

More information

RECIPROCATING SAW MODEL NO: CRS710V OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0416

RECIPROCATING SAW MODEL NO: CRS710V OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0416 RECIPROCATING SAW MODEL NO: CRS710V PART NO: 6462552 OPERATION & MAINTENANCE INSTRUCTIONS LS0416 INTRODUCTION Thank you for purchasing this CLARKE 710W Variable Speed Reciprocating Saw. Before attempting

More information

Tapping Screw (W/Flange) 46 Cord Armor 47 Tube (D) 48 Cord. 45 Cord Clip. Tapping Screw (W/Flange) 10 Gear Cover Ass'y. 12 Socket (B) Ass'y

Tapping Screw (W/Flange) 46 Cord Armor 47 Tube (D) 48 Cord. 45 Cord Clip. Tapping Screw (W/Flange) 10 Gear Cover Ass'y. 12 Socket (B) Ass'y W8VB The exploded assembly drawing should be used only for authoized service center. W8VB Item No. Part time 1 Magnetic Hex. Socket 2 Sub Stopper 3 O-Ring (S-16) 4 Locator (A) 5 Lock Sleeve (A) 6 O-Ring

More information

2-Speed Hammer Drill

2-Speed Hammer Drill ENGLISH 2-Speed Hammer Drill MODEL HP2032 MODEL HP2033 MODEL HP2034 DOUBLE INSULATION 002466 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE

More information

Drill MODEL DP3002/DP3003 MODEL DP4000/DP4001 MODEL DP4002/DP4003

Drill MODEL DP3002/DP3003 MODEL DP4000/DP4001 MODEL DP4002/DP4003 ENGLISH Drill MODEL DP3002/DP3003 MODEL DP4000/DP400 MODEL DP4002/DP4003 DP3002 DP4000 DP4002 DP3003 DP400 DP4003 003006 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety,

More information

Angle Drill DA4000LR INSTRUCTION MANUAL

Angle Drill DA4000LR INSTRUCTION MANUAL ENGLISH (Original instructions) INSTRUCTION MANUAL Angle Drill DA4000LR 003009 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE

More information

Ireland Australia New Zealand

Ireland Australia New Zealand www.blackanddecker.com UK Ireland Australia New Zealand 2 B C 3 3 D 21 22 E 3 F G 4 26 M N 5 P Q R S 6 English Intended use Your Black & Decker sander has been designed for sanding wood, metal, plastics

More information