Standardization, a tool to help bringing innovative technology from the laboratory to the market
|
|
- Georgiana Warren
- 5 years ago
- Views:
Transcription
1 Standardization, a tool to help bringing innovative technology from the laboratory to the market
2 Contents Why standards? A bit of history... Who are CEN and CENELEC? The CEN-CENELEC Management Centre Some examples Conclusions CEN-CENELEC
3 Contents Why standards? A bit of history... Who are CEN and CENELEC? The CEN-CENELEC Management Centre Some examples Conclusions CEN-CENELEC
4 What is a standard? A standard is a repeatable way of doing something a published document that contains a technical specification or other precise criteria agreed between stakeholders designed to be used consistently as a rule, guideline, or definition CEN-CENELEC
5 What is a standard? Essential elements of a product standard are Definitions Requirements Test methods CEN-CENELEC
6 A bit of (standard) history Descriptive standards The Eleusis inscription (IV Cent. BC) χαλκου δε έργάσεται Μαριέως, κεκραμένου την δωδεκάτην, τα ενδεκα μέρη χαλκου, το δε δωδέκατον καττιτέρου... He will use bronze produced at Marius of Cyprus, and of its twelve parts eleven to be of copper and one of tin. Bronze dowels (empolia and poloi) CEN-CENELEC
7 A bit of (standard) history Performance standards 1762 AD Building a new Ministry of Foreign Affairs 1 Fill the attic with straw 2 Set fire 3 Wait for four minutes 4 Allow the guards to try and extinguish the fire 5 If they succeed, the building is endorsed CEN-CENELEC
8 A bit of (standard) history Industrial development 1884 AD Charles Renard, designer of air ships and dirigible war balloons Reduction from 425 to 17 types of ropes and cables by using a system of preferred numbers (that was to become ISO 3) CEN-CENELEC
9 A bit of (standard) history Interoperability 1904 AD Fire hydrants and hoses Baltimore, USA CEN-CENELEC
10 Contents Why standards? A bit of history... Who are CEN and CENELEC? The CEN-CENELEC Management Centre Some examples Conclusions CEN-CENELEC
11 European Standards Organizations European Committee for Standardization (non-electrotechnical and non-communications) European Committee for Electrotechnical Standardization European Telecommunications Standardization Institute The three recognized European bodies for standardization in support of the European legal framework (Directive 98/34/EC) CEN-CENELEC
12 Formally recognized bodies International: Regional (Europe): National: National Standards Bodies (CEN) or National Committees (CENELEC) CEN-CENELEC
13 What is CEN? (1) The European Committee for Standardization, whose members are the National Standardization Bodies of the EU and EFTA countries plus Croatia CEN is an international non-profit organisation, incorporated under Belgian law 2 Counsellors (European Commission, EFTA) CEN-CENELEC Management Centre (CCMC), Brussels CEN-CENELEC
14 What is CEN? (2) Over experts of all fields are active in CEN work Experts from authorities, industry, consumer organisations the different stakeholders participate in the standardization process, which is open and transparent CEN-CENELEC
15 The CEN geography 31 Members: 27 EU member states 3 EFTA member states Croatia 19 Affiliates from applicant and neighbouring countries Member Affiliate CEN-CENELEC
16 How do we harmonize and contribute to the single market? European Standards (EN) Over ENs exist today, with about new documents being published every year High status, used to support legislation or directly referred to in legislation CEN Workshop Agreements (CWA) Consensus-based documents, directly made by the stakeholders Often used in innovative areas, e.g. biofuels or information technology CEN-CENELEC
17 Private specifications Standards Regulations Mandatory Voluntary Regulations Public Private CEN-CENELEC
18 What is a (European) standard? A standard is a document established by all interested parties (incl. yourself) reflecting consensus In addition, a European Standard (EN) is automatically transposed in national standards and conflicting national standards are to be withdrawn European Standards are from a legal point of view voluntary in use, but at the same time unavoidable in practice A tool to underpin the details of directives e.g. Medical device directive CEN-CENELEC
19 Drafting European Standards Technical Committee Working Group Technical Committee National Standards Body TIMEFRAME : 3 YEARS weighted vote Project proposal Draft standard European Standard USER national implementation CEN-CENELEC
20 Not only European Standards: The CEN Workshop Agreement A CEN Workshop Agreement (CWA) represents the consensus of identified stakeholders Anybody interested can join (including anyone outside Europe): direct participation A public process Rules are very simple (non-bureaucratic) Workshops are fast (5 months is the record, months average!) The CEN Workshop Agreement shall not conflict with European Standards (EN) CEN-CENELEC
21 Developing a CEN Workshop Agreement Business Plan Kick-off meeting Drafting and adoption of CWA CWA Publication TIMEFRAME : 6 18 MONTHS Describing Confirming Consensus building Announcement Scope Objectives Financing Schedule WS rules Financing Chair Secretariat WS participants Public consultation (as appropriate) by National Members CEN-CENELEC
22 You already know us stating compliance with legislation, mostly by means of European Standards EN 15494:2007 Candles Product safety labels EN 71-6:1994 Safety of toys Graphical symbols for age warning labelling (Pictogram now included in Toys Directive 2009/48/EC) CEN-CENELEC
23 Our international partner: ISO Main differences CEN ISO ISO works at worldwide level Consensus building process on ISO standards must take account of all regional interests No automatic transposition of ISO standard at national level Collaboration agreement between CEN and ISO (Vienna Agreement) avoids duplication of work CEN-CENELEC
24 CEN-CENELEC
25 Standards for products & services Standards on products EN 71 series on Safety of toys EN 14214:2008 Biodiesel for cars EN 81 series on Lifts Standards on services EN 14804:2005 Language study tour providers Requirements EN 14467:2004 Recreational diving services Requirements for recreational scuba diving service providers EN 15733:2009 Services of Real Estate Agents Requirements for the provision of the services of real estate agents CEN-CENELEC
26 Contents Why standards? A bit of history... Who are CEN and CENELEC? The CEN-CENELEC Management Centre Some examples Conclusions CEN-CENELEC
27 CEN-CENELEC
28 CEN-CENELEC Management Centre Directorate Innovation Research and Integration Unit (RIU) Helping you with your EC funded research projects Andreea GULACSI Ségolène MARTIN Luc VAN DEN BERGHE Business development Helping you set up a differently financed standardization project Guido DE JONGH gdejongh@cencenelec.eu Christine TACK ctack@cencenelec.eu CEN-CENELEC
29 Standards in context of Research, Development and Innovation Faster and easier access to market It provides technical validation and facilitate access of innovation solutions to the market Possibility to access a bigger market Potential access to the entire EU market (more than 500 million inhabitants) Helping access to public procurement markets Standards codify the state of the art of innovative product and services and are often used as references in public procurement schemes CEN-CENELEC
30 Standards in context of Research, Development and Innovation Codification of the state of the art Existing standards can codify and spread the state of the art in various technologies Interoperability Standards provide a basis for the integration of technologies and assist in ensuring interoperability Reassurance for consumers Standards can offer reassurance to consumers in the application of new technologies, for example through the assessment of risks, the measurement of performance, etc. CEN-CENELEC
31 Standards as part of EU funded research projects Why? Dissemination of your research results A normative document will become a reference and will ensure that research results are well-known, thus enhancing recognition of the researcher s results raising awareness of the benefits of standardization in the research and innovation process transferring research results and outcomes of innovation activities into standardization fully exploiting the functions of standards for research and innovation activities in order to increase the competitiveness of the EU CEN-CENELEC
32 Contents Why standards? A bit of history... Who are CEN and CENELEC? The CEN-CENELEC Management Centre Some examples Conclusions CEN-CENELEC
33 Some examples Bringing innovative technology from the laboratory to the market CEN-CENELEC
34 Some examples Flow Batteries CEN-CENELEC
35 Flow Batteries A single flow cell CEN-CENELEC
36 Flow Batteries Cross section of a bipolar module CEN-CENELEC
37 Flow Batteries The market opportunity Problem: Access to electricity storage market, confidence of electrical grid in flow batteries, etc. Solution: Elaborating a CENELEC Workshop Agreement on Flow Batteries The CWA will lay down, amongst others: definitions criteria for measuring the battery performance, including efficiency criteria for defining and specifying actions at the end of life battery maintenance criteria evaluation criteria CEN-CENELEC
38 Some examples Biofuels Flexi-fuel cars But no European specification for the E85 ethanol fuel. CEN-CENELEC
39 Biofuels Problem: Bio-ethanol powered engines emerge on the European roads, especially in Sweden and Spain. No common European specification for bio-ethanol fuel. Solution: Elaboration of a CEN Workshop Agreement as a step stone toward a European Standard on E85 Bio ethanol 1. Publication of CWA 15293:2005 Automotive fuels - Ethanol E85 - Requirements and test methods 2. Publication of CEN/TS 15293:2011 Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods CEN-CENELEC
40 Developing markets Biodiesel Production Capacity EN 14214:2003 Source: EBB CEN-CENELEC
41 Developing markets Bio-ethanol Source: epure CWA 15293:2005 CEN-CENELEC
42 Contents What is a standard? A bit of history... Who are CEN and CENELEC? The CEN-CENELEC Management Centre Some examples Conclusions CEN-CENELEC
43 Conclusions European standards and in particular Workshop Agreements help to bring innovative new technology from the laboratory to the market create market confidence in products and services shall be used more frequently in EU funded research and development projects CEN-CENELEC
44 Additional information Hands on standardization CEN-CENELEC
45 Questions? CEN-CENELEC
Position Paper. CEN-CENELEC Response to COM (2010) 546 on the Innovation Union
Position Paper CEN-CENELEC Response to COM (2010) 546 on the Innovation Union Introduction CEN and CENELEC very much welcome the overall theme of the Communication, which is very much in line with our
More informationFrom idea to market the role of standards. Andreea Gulacsi CEN-CENELEC Management Centre
From idea to market the role of standards Andreea Gulacsi CEN-CENELEC Management Centre Policy Context The Innovation Union, 2010: Standards play an important role for innovation The Standardization Regulation,
More informationSuccess Factors for downstreaming research results into CEN/CENELEC committees. Andreea Gulacsi CEN-CENELEC Management Centre
Success Factors for downstreaming research results into CEN/CENELEC committees Andreea Gulacsi CEN-CENELEC Management Centre Policy Context The Innovation Union, 2010: Standards play an important role
More information1 What is Standardization? 2 What is a standard? 3 The Spanish Association for Standardization, UNE
1 What is Standardization? 2 What is a standard? 3 The Spanish Association for Standardization, UNE 3 4 UNE and European and international standardization 5 How are standards prepared? 6 Why participate?
More informationComments from CEN CENELEC on COM(2010) 245 of 19 May 2010 on "A Digital Agenda for Europe"
Comments from CEN CENELEC on COM(2010) 245 of 19 May 2010 on "A Digital Agenda for Europe" Agreed by CEN and CENELEC Members following a written consultation process 1 European standardization to support
More informationCOMPASS. The World of European Standards
COMPASS The World of European Standards 3 STANDARDS WORK Can you imagine a Europe with different credit card sizes, a Europe where you couldn t be certain that petrol was the same in every country or
More informationThe role and practicalities of standardization in Horizon 2020
The role and practicalities of standardization in Horizon 2020 Luc Van den Berghe, Programme Manager - Research Integration, CEN-CENELEC Management Centre Content The context European Policy CEN-CENELEC
More informationISO INTERNATIONAL STANDARD. Nomenclature Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange
INTERNATIONAL STANDARD ISO 15225 First edition 2000-09-15 Nomenclature Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange Nomenclature Spécifications
More informationWG/STAIR. Knut Blind, STAIR Chairman
WG/STAIR Title: Source: The Operationalisation of the Integrated Approach: Submission of STAIR to the Consultation of the Green Paper From Challenges to Opportunities: Towards a Common Strategic Framework
More informationAt its meeting on 18 May 2016, the Permanent Representatives Committee noted the unanimous agreement on the above conclusions.
Council of the European Union Brussels, 19 May 2016 (OR. en) 9008/16 NOTE CULT 42 AUDIO 61 DIGIT 52 TELECOM 83 PI 58 From: Permanent Representatives Committee (Part 1) To: Council No. prev. doc.: 8460/16
More informationINTRODUCTION TO STANDARDS AND THEIR PLACE IN THE TEXTILE AND FASHION INDUSTRY. Alison Scotland National Sector Manager Standards Australia
INTRODUCTION TO STANDARDS AND THEIR PLACE IN THE TEXTILE AND FASHION INDUSTRY Alison Scotland National Sector Manager Standards Australia 23 September 2016 Standards Australia PRESENTATION OVERVIEW Standards
More informationConsequently proposal is made to set up a joint group Gas Quality SFGas Utilisation/Infrastructure to perform pre-normative activities.
Schülken, Hiltrud Von: Dupin, François Gesendet: Freitag, 29. Januar 2016 12:45 An: Aldridge; Burchill; Hivert; Krocek (amf@mymail.cz); Markitanis (smarkita@eac.com.cy); Nikolov (georgi_nikolov@overgas.bg);
More informationILNAS-EN 14136: /2004
05/2004 National Foreword This European Standard EN 14136:2004 was adopted as Luxembourgish Standard in May 2004. Every interested party, which is member of an organization based in Luxembourg, can participate
More informationDraft executive summaries to target groups on industrial energy efficiency and material substitution in carbonintensive
Technology Executive Committee 29 August 2017 Fifteenth meeting Bonn, Germany, 12 15 September 2017 Draft executive summaries to target groups on industrial energy efficiency and material substitution
More informationStandardization in Horizon2020. Andreea Gulacsi, Unit Manager Research Integration CEN-CENELEC Management Centre
Standardization in Horizon2020 Andreea Gulacsi, Unit Manager Research Integration CEN-CENELEC Management Centre Policy Context The Innovation Union, 2010: Standards play an important role for innovation
More informationThe 45 Adopted Recommendations under the WIPO Development Agenda
The 45 Adopted Recommendations under the WIPO Development Agenda * Recommendations with an asterisk were identified by the 2007 General Assembly for immediate implementation Cluster A: Technical Assistance
More informationEUROPEAN COMMISSION Directorate-General for Communications Networks, Content and Technology CONCEPT NOTE
EUROPEAN COMMISSION Directorate-General for Communications Networks, Content and Technology 1. INTRODUCTION CONCEPT NOTE The High-Level Expert Group on Artificial Intelligence On 25 April 2018, the Commission
More informationCEN-CENELEC JWG10 'Energy-related products Material Efficiency Aspects for Ecodesign'
CEN-CENELEC JWG10 'Energy-related products Material Efficiency Aspects for Ecodesign' Proposed Project Teams: It is proposed that the following PTs be installed. The exact PT teams and the work they will
More informationISO/TC145-IEC/SC3C JWG 11 N 16E
ISO/TC145-IEC/SC3C JWG 11 N 16E ISO ORGANISATION INTERNATIONALE DE NORMALISATION INTERNATIONAL ORGANIZATION FOR STANDARDIZATION IEC COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE INTERNATIONAL ELECTROTECHNICAL
More informationWIPO Development Agenda
WIPO Development Agenda 2 The WIPO Development Agenda aims to ensure that development considerations form an integral part of WIPO s work. As such, it is a cross-cutting issue which touches upon all sectors
More informationLorenza Jachia Secretary, Working Party on Regulatory Cooperation and Standardization Policies, UN Economic Commission for Europe
The UNECE Sectoral Initiative on Environments Equipment for Explosive A global legislative framework for Explosion Protection The comprehensive approach of the UNECE Model L Regulation Lorenza Jachia Secretary,
More informationPower-to-Hydrogen : key challenges and next steps
Power-to-Hydrogen : key challenges and next steps CEN-CENELEC/TC 6 on Hydrogen Françoise de Jong NEN standardization consultant JRC workshop Power-to-Hydrogen: key challenges and next steps May 2016 Brussels
More informationBDS Activities to Support SMEs in 2013
BDS Activities to Support SMEs in 2013 1. Introduction The report summarizes the activities implemented in 2013 by BDS to support SMEs in the application of standards and to encourage them for participation
More informationAnnex III - 3. Memorandum of Understanding on the development of the Pan-European Transport Corridor VII (The Danube) (DRAFT)
Annex III - 3 Memorandum of Understanding on the development of the Pan-European Transport Corridor VII (The Danube) (DRAFT) Desiring to promote international transport of goods and passengers through
More informationPOSITION ON A EUROPEAN CONSULTATION ON EXPERT GROUP FINAL REPORT ON E-INVOICING. General assessment
POSITION ON A EUROPEAN CONSULTATION ON EXPERT GROUP FINAL REPORT ON E-INVOICING ASIMELEC, the Spanish Association for ICT and Consumer Electronics Sector, welcomes the European Commission s initiative
More informationStandards in. International Trade & Nuclear Safety. The Role of IAEA
The Role of Standards in International Trade & Nuclear Safety IAEA International Atomic Energy Agency International Atomic Energy Agency Technical Meeting on Shared Experiences and Lessons Learned from
More informationRECOMMENDATIONS. COMMISSION RECOMMENDATION (EU) 2018/790 of 25 April 2018 on access to and preservation of scientific information
L 134/12 RECOMMDATIONS COMMISSION RECOMMDATION (EU) 2018/790 of 25 April 2018 on access to and preservation of scientific information THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning
More informationTHE FOURTH FRAMEWORK PROGRAMME
THE FOURTH FRAMEWORK PROGRAMME 1994-1998 Drawing on a budget of 12.3 thousand million Ecus, plus a reserve of 700 million Ecus to be released before 30 June 1996 subject to certain conditions, this research
More informationETSI EN V1.1.2 ( ) Harmonized European Standard
EN 302 729-2 V1.1.2 (2011-05) Harmonized European Standard Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the
More informationGIE response to public consultation Interoperability NC of ENTSOG
Ref 13GIE052 April 2013 GIE response to public consultation Interoperability NC of ENTSOG Who is GIE? Gas Infrastructure Europe (GIE) is an association representing the sole interest of the infrastructure
More informationSAUDI ARABIAN STANDARDS ORGANIZATION (SASO) TECHNICAL DIRECTIVE PART ONE: STANDARDIZATION AND RELATED ACTIVITIES GENERAL VOCABULARY
SAUDI ARABIAN STANDARDS ORGANIZATION (SASO) TECHNICAL DIRECTIVE PART ONE: STANDARDIZATION AND RELATED ACTIVITIES GENERAL VOCABULARY D8-19 7-2005 FOREWORD This Part of SASO s Technical Directives is Adopted
More informationRADIO SPECTRUM POLICY GROUP. Commission activities related to radio spectrum policy
EUROPEAN COMMISSION Directorate-General for Communications Networks, Content and Technology Electronic Communications Networks and Services Radio Spectrum Policy Group RSPG Secretariat Brussels, 03 October
More informationProposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL. on the issuance of euro coins
EUROPEAN COMMISSION Brussels, 25.5.2011 COM(2011) 295 final 2011/0131 (COD) Proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the issuance of euro coins 2011/0131 (COD) Proposal
More informationWater, Energy and Environment in the scope of the Circular Economy
Water, Energy and Environment in the scope of the Circular Economy Maria da Graça Carvalho 11th SDEWES Conference Lisbon 2016 Contents of the Presentation 1. The Circular Economy 2. The Horizon 2020 Program
More informationThis document is a preview generated by EVS
CEN WORKSHOP AGREEMENT CWA 17327 September 2018 ICS 03.080.30; 03.200.01 English version Hotel General Manager - Knowledge, skills and competence requirements This CEN Workshop Agreement has been drafted
More informationA New Platform for escience and data research into the European Ecosystem.
Digital Agenda A New Platform for escience and data research into the European Ecosystem. Iconference Wim Jansen einfrastructure DG CONNECT European Commission The 'ecosystem': some facts 1. einfrastructure
More informationMunkaanyag
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16555-4 December 2014 ICS 03.100.40; 03.100.50; 03.140 English Version Innovation management - Part 4: Intellectual property
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61924 First edition 2006-05 Maritime navigation and radiocommunication equipment and systems Integrated navigation systems Operational and performance requirements, methods of
More informationFP7 Cooperation Programme - Theme 6 Environment (including climate change) Tentative Work Programme 2011
FP7 Cooperation Programme - Theme 6 Environment (including climate change) Tentative Work Programme 2011 European Commission Research DG Michele Galatola Unit I.3 Environmental Technologies and Pollution
More informationBulletin. Innovations in Sustainable Urban Mobility Plans for low-carbon urban transport January 2017 June 2021
Bulletin Interregional cooperation project newsletter I Issue 1 InnovaSUMP project facilitates to take-up of Sustainable Urban Mobility Plans with innovations on travel behaviour, pricing and financing,
More informationNew approach for lighting Regulations
(Proposal for discussion to the members of GRE) New approach for lighting Regulations Why a new approach? UNECE/GRE Role: GRE manages 41 Regulations. Many of them use the same test requirements. Furthermore
More informationEU Standards dedicated Mobile and Base Station
EU Standards dedicated Mobile and Base Station Joe Wiart Whist Lab Orange Labs & Telecom Institute laboratory Convenor of the CENELEC TC106x WG1 Gaborone 2010 CENELEC Composed of the National Electrotechnical
More informationLatin-American non-state actor dialogue on Article 6 of the Paris Agreement
Latin-American non-state actor dialogue on Article 6 of the Paris Agreement Summary Report Organized by: Regional Collaboration Centre (RCC), Bogota 14 July 2016 Supported by: Background The Latin-American
More informationETSI EN V1.1.1 ( )
EN 301 489-51 V1.1.1 (2016-11) HARMONISED EUROPEAN STANDARD ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 51: Specific conditions for Automotive, Ground based Vehicles
More informationCOMMISSION RECOMMENDATION. of on access to and preservation of scientific information. {SWD(2012) 221 final} {SWD(2012) 222 final}
EUROPEAN COMMISSION Brussels, 17.7.2012 C(2012) 4890 final COMMISSION RECOMMENDATION of 17.7.2012 on access to and preservation of scientific information {SWD(2012) 221 final} {SWD(2012) 222 final} EN
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62794 Edition 1.0 2012-11 colour inside Industrial-process measurement, control and automation Reference model for representation of production facilities (digital factory) INTERNATIONAL
More informationISO INTERNATIONAL STANDARD. Ergonomic design for the safety of machinery Part 3: Anthropometric data
INTERNATIONAL STANDARD ISO 15534-3 First edition 2000-02-15 Ergonomic design for the safety of machinery Part 3: Anthropometric data Conception ergonomique pour la sécurité des machines Partie 3: Données
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN ISO 9431:1999
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 9431 July 1999 ICS 01.100.00 English version Construction drawings - Spaces for drawing and for text, and title blocks on drawing sheets (ISO
More informationISO/TR TECHNICAL REPORT. Intelligent transport systems System architecture Privacy aspects in ITS standards and systems
TECHNICAL REPORT ISO/TR 12859 First edition 2009-06-01 Intelligent transport systems System architecture Privacy aspects in ITS standards and systems Systèmes intelligents de transport Architecture de
More informationDEVELOPMENT OF SUBSEA REGULATIONS IN THE NORWEGIAN PETROLEUM INDUSTRY FOLLOW UP AND USE OF STANDARDS
NH GRAND HOTEL KRASNAPOLSKY AMSTERDAM 3-5 APRIL 2017 DEVELOPMENT OF SUBSEA REGULATIONS IN THE NORWEGIAN PETROLEUM INDUSTRY FOLLOW UP AND USE OF STANDARDS Trond Sundby Petroleum Safety Authority, Norway
More informationINTERNATIONAL. Medical device software Software life cycle processes
INTERNATIONAL STANDARD IEC 62304 First edition 2006-05 Medical device software Software life cycle processes This English-language version is derived from the original bilingual publication by leaving
More informationEUROPEAN COMMISSION DIRECTORATE-GENERAL FOR MOBILITY AND TRANSPORT PASSENGER SHIP SAFETY EXPERT SUB-GROUP
EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR MOBILITY AND TRANSPORT i Directorate D - Logistics, maritime & land transport and passenger rights D.2 - Maritime safety Brussels, MOVE D2 (2016) PASSENGER SHIP
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62037-5 Edition 1.0 2013-01 Passive RF and microwave devices, intermodulation level measurement INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE M ICS 33.040.20 ISBN 978-2-83220-580-8
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8442-8 First edition 2000-12-01 Materials and articles in contact with foodstuffs Cutlery and table holloware Part 8: Requirements for silver table and decorative holloware Matériaux
More informationGlobal Harmonization Task Force
Global Harmonization Task Force How to minimize risks without constraining innovation and harming free trade The role of international standards And their application at regional and national levels Cornelis
More informationProposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
EUROPEAN COMMISSION Brussels, 13.6.2013 COM(2013) 316 final 2013/0165 (COD) Proposal for a REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL concerning type-approval requirements for the deployment
More informationTECHNICAL SPECIFICATION
IEC/TS 60815-2 TECHNICAL SPECIFICATION Edition 1.0 2008-10 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 2: Ceramic and glass insulators for a.c. systems
More informationAs at: Draft Bill of the Federal Ministry for Economic Affairs and Energy. Fourth Law amending the Telecommunications Act
As at: 05.04.2017 Draft Bill of the Federal Ministry for Economic Affairs and Energy A. Problem and Aim Fourth Law amending the Telecommunications Act The digitalisation of radio offers radio programme
More informationThis is a preview - click here to buy the full publication
IEC/TR 80002-1 TECHNICAL REPORT Edition 1.0 2009-09 colour inside Medical device software Part 1: Guidance on the application of ISO 14971 to medical device software INTERNATIONAL ELECTROTECHNICAL COMMISSION
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 61400-14 First edition 2005-03 Wind turbines Part 14: Declaration of apparent sound power level and tonality values IEC 2005 Copyright - all rights reserved No part of this
More informationProposal for a COUNCIL DECISION
EUROPEAN COMMISSION Brussels, 23.5.2017 COM(2017) 273 final 2017/0110 (NLE) Proposal for a COUNCIL DECISION on the position to be adopted, on behalf of the European Union, in the European Committee for
More informationQuality assurance in the supply chain for pharmaceuticals from the WHO perspective
1 Quality assurance in the supply chain for pharmaceuticals from the WHO perspective Dr Sabine Kopp Quality Assurance and Safety: Medicines Medicines Policy and Standards World Health Organization Presentation
More informationANSI/IEC American National Standard for Environmentally Conscious Design for Electrical and Electronic Products
ANSI/IEC 62430-2010 American National Standard for Environmentally Conscious Design for Electrical and Electronic Products Approved as an American National Standard ANSI Approval Date: October 19, 2010
More informationANEC-ICT-2014-G-020final April 2014
ANEC comments on European Commission Standardisation request addressed to the European Standardisation Organisations in support of the implementation of privacy management in the design and development
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8442-1 First edition 1997-12-15 Materials and articles in contact with foodstuffs Cutlery and table holloware Part 1: Requirements for cutlery for the preparation of food Matériaux
More informationCEN WORKSHOP DRAFT BUSINESS PLAN. Humanitarian Mine Action (HMA) Test and Evaluation (T&E) - Personal Protective Equipment (PPE)
CEN WORKSHOP DRAFT BUSINESS PLAN Humanitarian Mine Action (HMA) Test and Evaluation (T&E) - Personal Protective Equipment (PPE) Contents 1 The Background to Humanitarian Mine Action Standards... 2 1.1
More informationDraft submission paper: Hydrographic Offices way on EMODnet. Subject : Hydrographic Offices way on EMODnet. Foreword :
Subject : Hydrographic Offices way on EMODnet Foreword : This paper is aimed to present the state of the EMODnet project, the European Commission s policy for this project, the principles of the Hydrographic
More informationMedical Technology Association of NZ. Proposed European Union/New Zealand Free Trade Agreement. Submission to Ministry of Foreign Affairs & Trade
Medical Technology Association of NZ Proposed European Union/New Zealand Free Trade Agreement Submission to Ministry of Foreign Affairs & Trade February 2016 1 Introduction The Medical Technology Association
More informationSUMMARY. Adopt draft Decision 19.2/1 Roadmap to Enhanced WMO Technical Regulations Framework.
World Meteorological Organization EXECUTIVE COUNCIL Sixty-Eighth Session Geneva, 15 to 24 June 2016 EC-68/Doc. 19.2 Submitted by: President 21.VI.2016 APPROVED AGENDA ITEM 19: AGENDA ITEM 19.2: GENERAL
More informationUpdate on relevant points discussed at 27 th Madrid Forum. Walter Boltz
Update on relevant points discussed at 27 th Madrid Forum Walter Boltz Main topics of interest Energy Union Security of Supply European Gas Target Model Gas Quality Harmonisation Role of the Gas Regional
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61097-15 Edition 1.0 2012-05 Global maritime distress and safety system (GMDSS) Part 15: Inmarsat FB500 ship earth station Operational and performance requirements, methods of
More informationA/AC.105/C.1/2014/CRP.13
3 February 2014 English only Committee on the Peaceful Uses of Outer Space Scientific and Technical Subcommittee Fifty-first session Vienna, 10-21 February 2014 Long-term sustainability of outer space
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62153-4-11 Edition 1.0 2009-08 colour inside Metallic communication cable test methods Part 4-11: Electromagnetic compatibility (EMC) Coupling attenuation or screening attenuation
More informationGetting the evidence: Using research in policy making
Getting the evidence: Using research in policy making REPORT BY THE COMPTROLLER AND AUDITOR GENERAL HC 586-I Session 2002-2003: 16 April 2003 LONDON: The Stationery Office 14.00 Two volumes not to be sold
More informationIS INTERNATIONAL STANDARD. Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position
INTERNATIONAL STANDARD IS0 13920 First edition 1996-08-o 1 Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position Soudage - Tolkrances g&wales relatives
More informationThis document is a preview generated by EVS
CEN WORKSHOP CWA 16525 December 2012 AGREEMENT ICS 01.140.20; 35.240.60 English version Multilingual electronic cataloguing and classification in ebusiness - Classification Mapping for open and standardized
More informationEnglish version. Steel and steel products Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 377 July 1997 ICS 77.040.10; 77.140.01 Descriptors: See ISO document English version Steel and steel products Location and preparation of samples
More informationEuropean Charter for Access to Research Infrastructures - DRAFT
13 May 2014 European Charter for Access to Research Infrastructures PREAMBLE - DRAFT Research Infrastructures are at the heart of the knowledge triangle of research, education and innovation and therefore
More informationTECHNICAL SPECIFICATION
IEC/TS 60815-3 TECHNICAL SPECIFICATION Edition 1.0 2008-10 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE
More informationCOUNCIL OF THE EUROPEAN UNION. Brussels, 9 December 2008 (16.12) (OR. fr) 16767/08 RECH 410 COMPET 550
COUNCIL OF THE EUROPEAN UNION Brussels, 9 December 2008 (16.12) (OR. fr) 16767/08 RECH 410 COMPET 550 OUTCOME OF PROCEEDINGS of: Competitiveness Council on 1 and 2 December 2008 No. prev. doc. 16012/08
More informationESA Iris Programme Analysis & definition of the Satellite System Operations. Briefing 28 July
ESA Iris Programme Analysis & definition of the Satellite System Operations Briefing 28 July 2009 - Nathalie.Ricard@esa.int 1 Analysis & Definition of Satellite Operations Study rationale ESA s involvement
More informationMarket Access and Environmental Requirements
Market Access and Environmental Requirements THE EFFECT OF ENVIRONMENTAL MEASURES ON MARKET ACCESS Marrakesh Declaration - Item 6 - (First Part) 9 The effect of environmental measures on market access,
More informationPUBLICLY AVAILABLE SPECIFICATION
PUBLICLY AVAILABLE SPECIFICATION PRE-STANDARD This is a preview - click here to buy the full publication IEC/PAS 62647-23 Edition 1.0 2011-07 colour inside Process management for avionics Aerospace and
More informationNational Agreement on the Circular Economy. Letter of intent to develop transition agendas for the Circular Economy together
National Agreement on the Circular Economy Letter of intent to develop transition agendas for the Circular Economy together Partners The drafting partners of this agreement are: VNO-NCW (Confederation
More informationANEC response to the CEN-CENELEC questionnaire on the possible need for standardisation on smart appliances
ANEC response to the CEN-CENELEC questionnaire on the possible need for standardisation on smart appliances In June 2015, the CEN and CENELEC BT members were invited to share their views on the need for
More information10246/10 EV/ek 1 DG C II
COUNCIL OF THE EUROPEAN UNION Brussels, 28 May 2010 10246/10 RECH 203 COMPET 177 OUTCOME OF PROCEEDINGS from: General Secretariat of the Council to: Delegations No. prev. doc.: 9451/10 RECH 173 COMPET
More informationThis is a preview - click here to buy the full publication TECHNICAL REPORT. Commission Electrotechnique Internationale
TECHNICAL REPORT IEC TR 61997 First edition 2001-09 Guidelines for the user interface in multimedia equipment for general purpose use IEC 2001 Copyright - all rights reserved No part of this publication
More informationCEN / CENELEC Joint Task Force, Software as Medical Devices: Current Status
CEN / CENELEC Joint Task Force, Software as Medical Devices: Current Status JIC Open Forum - Software as Medical Devices Educational session, Melvin Reynolds at ISO/TC215 and CEN/TC 251 JWGs meeting Rotterdam,
More informationPROMOTING QUALITY AND STANDARDS
PROMOTING QUALITY AND STANDARDS 1 PROMOTING QUALITY AND STANDARDS Strengthen capacities of national and regional quality systems (i.e. metrology, standardization and accreditation) Build conformity assessment
More informationISO/TC145-IEC/SC3C JWG 11 N 16A
ISO/TC145-IEC/SC3C JWG 11 N 16A ISO ORGANISATION INTERNATIONALE DE NORMALISATION INTERNATIONAL ORGANIZATION FOR STANDARDIZATION IEC COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE INTERNATIONAL ELECTROTECHNICAL
More informationINTERNATIONAL STANDARD
IEC 62002-2 INTERNATIONAL STANDARD Edition 2.0 2008-05 Mobile and portable DVB-T/H radio access Part 2: Interface conformance testing INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE X ICS 33.170 ISBN
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION IEC TS 61400-14 First edition 2005-03 Wind turbines Part 14: Declaration of apparent sound power level and tonality values Reference number IEC/TS 61400-14:2005(E) Publication numbering
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8442-5 First edition 2004-12-15 Materials and articles in contact with foodstuffs Cutlery and table holloware Part 5: Specification for sharpness and edge retention test of cutlery
More informationThis is a preview - click here to buy the full publication. IEC 2006 Copyright - all rights reserved
INTERNATIONAL STANDARD IEC 60287-1-1 Second edition 2006-12 Electric cables Calculation of the current rating Part 1-1: Current rating equations (100 % load factor) and calculation of losses General IEC
More informationEUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL. Minutes. Subject: Plenary Meeting of the Raw Material Supply Group (RMSG)
Minutes Subject: Plenary Meeting of the Raw Material Supply Group (RMSG) Date: 26 th January 2017 Venue: Brussels, BREY, Room 12B Chairperson: Mattia Pellegrini (Head of Unit, DG GROW C2) Attachments:
More informationGEAR 2030 WORKING GROUP 2 Roadmap on automated and connected vehicles
GEAR 2030 WORKING GROUP 2 Roadmap on automated and connected vehicles Europe has a very strong industrial basis on automotive technologies and systems. The sector provides jobs for 12 million people and
More informationEuropean Circular Economy Stakeholder Conference Brussels, February 2018 Civil Society Perspectives
European Circular Economy Stakeholder Conference Brussels, 20-21 February 2018 Civil Society Perspectives On the 20 th and 21 st February 2018, the European Commission and the European Economic and Social
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60424-5 Edition 1.0 2009-02 Ferrite cores Guide on the limits of surface irregularities INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE N ICS 29.100.10 ISBN 978-2-88910-190-0
More informationConstruction of a Collaborative Creation Platform
352 Hitachi Review Vol. 64 (2015), No. 6 Featured Articles Construction of a Collaborative Creation Platform A New Approach to International Standardization Yoshiaki Ichikawa, Dr. Eng. OVERVIEW: The standards
More informationIS INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 8442-2 First edition 1997-l 2-15 Corrected 1998-01-I 5 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel
More information