STRATEGIES IN CAR BODY PAINTING

Similar documents
CAR BODY PAINTING 2017

Executive Programme 2014

Assembly Engineering 2013

Doors and Closures in Car Body Engineering 2009

AUTOMOTIVE INNOVATION FORUM 2018

InnoTesting Improving Efficiency by Controlling Complexity in Testing. Wildau, Aerospace Technology Centre

AUTOMOTIVE-ENGINEERING-EXPO.COM TAKE YOUR BUSINESS TO THE NEXT LEVEL IN N RNBERG, GERMANY

ITEA 3: Seizing the High Ground in a Time of Change. ITEA 3 Kick-off Event, Vienna 23 April 2014 Prof. Dr. Rudolf Haggenmüller, Chairman ITEA 3

Forming in Car Body Engineering 2012

Automotive Seating. Guided Tour at Technikum GmbH factory. 15th International CTI Forum 9 and 10 June 2015, Stuttgart, Germany

Digitising Manufacturing in the G20 Initiatives, Best Practices and Policy Approaches March 2017, Berlin

trend.scaut be the first. The automotive conference 26 May 2009 / St. Valentin, Austria

ENABLING SMARTER INTERMODALITY COLOGNE, NOVEMBER

Summary. INTERNATIONAL STUDY MISSION 2-6 December 2013: Germany

Berlin Powertrain Symposium

AUTOMOTIVE ENGINEERING

The ISO Revision: Looking back and into the future

The European Business Conference for Assembly and Handling Technology. January 23 24, 2009, Davos, Switzerland

Member of the Supervisory Board of Linde Aktien gesellschaft since May 2011 as well as member of the Audit Committee and of the Nomination Committee.

Automobile Painting in the BRIC Countries - Quality at low Cost - Dr. Hans Schumacher, Dürr Systems GmbH

Call for proposals to host. the. Ecsite Directors Forum 2015 or Ecsite Directors Forum 2016

Manual Transmission Technology, Trends, and Future Directions An Industry Seminar Sponsored by The Lubrizol Corporation

STEINBICHLER 25 YEARS OF INSPIRING INNOVATION ABIS OPTICAL SURFACE INSPECTION

VISUAL & DISPLAY TECHNOLOGIES

Organized by HIRAYAMA Consulting Co-Organized by International Development Center of Japan Inc.(IDCJ)

DIGITALISING MANUFACTURING CONFERENCE 2017

Call for Papers. Düsseldorf, 28 th 29 th October Pump Users. Compressor Users. International Forum International Forum 2008

Semiconductor- Industry 2003.

3DSE Management Summit 2014 Highly efficient development organization Identify and expand performance limitations.

The Key Event for Thermo Process Technology

VISIONS on Composites Innovation in Automotive, Aerospace and more

MODEL-BASED DEVELOPMENT OF AUTOMOTIVE EMBEDDED SOFTWARE IN COMPLIANCE WITH ISO 26262: CHALLENGES & EFFECTIVE SOLUTIONS November 21 22, 2016

Michelin Challenge Bibendum 2014

AUTOMOTIVE REFINISH PRODUCT CATALOGUE

Workshop: GRANULATION & TABLETING New requirements for an established technology - robustness, efficiency and quality.

Berlin Summit, Hotel Adlon Kempinski, April 26-27, 2012

Digital Radio in the car in 10 years

APAC Innovation Summit 2016 Series. 7-8 April Grand Hall and Conference Halls 4-7, Science Park. Conference Proceedings.

Automotive Diagnostics

Technical Background

PMA/TOOLS FRANCE Z.A.-214, rue de la Warnave Nieppe Tel.: Fax:

Robust Polishing of environmentally friendly coatings and their dependence on the substrate for lightweight materials in the automotive industry

Program SEPTEMBER 2018 LESER KONTOR HAMBURG. days. experience

Press Release 19 December 2017

AECM Annual Conference 2017 Sicily (Italy) 8 10 June Hilton Giardini Naxos Hotel, Sicily, Italy INVITATION

THE LARGEST OEM REPRESENTATION IN A UNIQUE INTERACTIVE GLOBAL AUTOMOTIVE AERODYNAMICS CONFERENCE November 2018, Crewe, UK INTERNATIONAL FORUM

8 th Zurich Regional and Global Headquarters Conference

Updated NG17: Introduction Overview and data

source: Re'flekt Pécs Delegation Visit to Fellbach Digitalisation & Industry 4.0

AGENDA. Keynote speeches. 09:15-10:10 Session 1. Opening address

CONFERENCE 15 AMIENS EXTRA PLANT VISIT PRELIMINARY PROGRAMME STELIA AEROSPACE

Defining the future of the digital radio November 2012 Leipzig, Germany. Defining the future of digital radio.

Megaron Conference Centre Athens, Greece April 9-11, 2014

ADVANCED AUTOMOTIVE AERODYNAMICS INTERNATIONAL FORUM

Logon free of charge:

Risk Center Workshop Autonomous Decision-Making: Assessing the Technology and its Impact on Industry and Society

For region's tech and IT offices, a different role

ICE HKA Annual Conference 2017

20 22 FEBRUARY MAY SEPTEMBER 2018

Western Europe 2018 FX

Newsletter. A publication of SPE Europe. Kunstoffen 2014 Plastics & Polymers Innovation Award 2014 ANTEC Brussels 2015 Polytalk 2014 And More...

Metalsa: Automated Quality Control of Formed Sheet Metal Parts

RMI ANALYTICS WORLD BARLEY, MALT & BEER CONFERENCE MADRID, SPAIN

We would like to acknowledge the generous financial contributions from our sponsors: Alpla Inc., Arnall Golden Gregory LLP, Austrian Airlines, Blum

WORKING TODAY FOR A BETTER TOMORROW. What we do

WorldDAB Automotive 2017 DAB+ in the dashboard: Today, tomorrow and in the future

Your Herrnhuter Sterne GmbH

1st VIENNA WINDOW CONVENTION

Program. Tom Enders Airbus. Carlos Tavares PSA. Maria-Elisabeth Schaeffler-Thumann Schaeffler. Harald Krüger BMW. Herbert Diess Volkswagen

NOVEMBER 20 21, 2018 SMARTVILLAGE, MUNICH

Automotive Audio. The 48 th AES International Conference. Munich, Germany September 21 23, 2012

Insight: Litigation Trends (Top 10 Global Manufacturers)

MODEL-BASED DEVELOPMENT OF AUTOMOTIVE EMBEDDED SOFTWARE IN COMPLIANCE WITH ISO 26262: CHALLENGES & EFFECTIVE SOLUTIONS

Artificial intelligence Inspiring solutions

Transnational Workshop on Innovative Financing Instruments for Eco-Innovation in Central Europe Vienna, 9 th of October 2014

6 February KfW Bankengruppe, Palmengartenstraße Frankfurt am Main. Draft Programme.

Unitary patent & Unified Patent Court

FOCUS ON OFFSHORE FOUNDATIONS & TOWER COMPONENTS. OCTOBER 26 th - 27 th in Davi Auditorium Cesena, Italy

Vehicle Fiber-Optics and Photonics Conference

APRIL 25 29, 2018 BERLIN EXPOCENTER AIRPORT INNOVATION AND LEADERSHIP IN AEROSPACE

APPLIED SMART MATERIALS FUNCTIONAL MATERIALS: DISRUPTIVE TECHNOLOGIES FOR INTELLIGENT SOLUTIONS

Workshop 239 HANDS ON: CONTINUOUS OSD PHARMA PROCESSING A forward looking approach for the production of oral solid dosage forms.

Western Europe Ford FX 2017

12 th Aachen Technology and Innovation Management Conference. Agile Invention: Hype or Game Changer?

Responsible Supply Chain Solutions. A Sedex Global and Schlange & Co. event 20 th May 2014, Maritim Hotel, Frankfurt am Main

Eastern Europe 2018 FX

Europe DVD 2018 EX-V (VX) for TravelPilot

Note to editors: Media information

Unitary patent & Unified Patent Court

14 16 MARCH 2018 ROME, ITALY. 11 th EUROPEAN THERMOFORMING CONFERENCE 2018 THERMOFORMING 4.0

Transforming Automobile Assembly

Sustainable Land Use Short food supply chains in operation

IVAM HIGH-TECH SUMMIT SIGNPOST TOWARDS DIGITALIZATION. Products for digitalization. Digitalization of processes and products at SMEs

Benefits and advantages of ergonomic studies in digital 3D

AkzoNobel Aerospace Coatings. Global Training Program

WorldDAB Automotive 2017 DAB+ in the dashboard: Today, tomorrow and in the future

Future World with. Printing and Extrusion technologies for Smart vehicle, Smart wearables and Smart homes. 5 th June 2018 Stuttgart, germany

Newsletter 2018Q1. Shanghai 3D Printing Seminar. Plant visit of Polyram & Covestro 科思创. UC Annual Dinner. Visited TCT Exhibition. Corporate Challenge

CANdelaStudio. Authoring Tool for Diagnostic Data V

Foresight Europe Network Documentation, Meeting on May 16th 2018 in Berlin

Transcription:

STRATEGIES IN CAR BODY PAINTING 2018 28 29 JUNE 2018, BERLIN, GERMANY THE GLOBAL PAINT SHOP HARMONY BETWEEN SUSTAINABILITY, EFFICIENCY AND DIGITISATION

THE GLOBAL PAINT SHOP HARMONY BETWEEN SUSTAINABILITY, EFFICIENCY AND DIGITISATION Rising demand, especially for electric vehicles, increasing networking between individual plants as well as between OEMs and suppliers and the steady concentration on environment-friendly painting technologies these and other factors are at the focus of delegates coming to the Strategies in Car Body Painting conference in 2018 again. Meet representatives from the world s leading OEM network in Berlin and join international experts talk about the latest developments. Discuss forthcoming challenges in automotive surface treatment and in forward-looking paint shops. Use this opportunity to exchange ideas on genuine technical innovations and to push ahead the global network (Europe, Asia and NAFTA). FOCUS TOPICS: Digitisation and Big Data in the paint shop Influence of e-mobility to the painting processes Innovative technologies and environmentalism International projects Come along and discuss with us the international OEM Advisory Board and I look forward to seeing you there. Andrea Huber Presidium Automotive Circle

GET STRATEGIC INSIGHTS INTO GLOBAL OEM PAINT SHOPS Porsche Digitisation Porsche Production 4.0 in the paint shop Volvo Application of waterborne SSD in roof: Introduction in paint shop Audi Overspray-free painting First use of process-integrated contrast painting Sustainability aspects of cavity preservation The development of flooding wax technology Hyundai-Kia Quantifying the consumer experience: Advances in scratch measurement help design the next generation of automotive OEM clear coats Toyota Development of omnidirectional, structural blue colour for Lexus Groupe PSA Towards the paint shop of the future Renault Renault Digital Manufacturing: Transformation and its application to paint shop FCA Wheatering aging test method evolution in FCA Volkswagen Think Blue. Factory Environmental and sustainable painting processes at Volkswagen MEET THE SPEAKERS Meet the speakers and international OEM for individual discussions. Boost your networking and get new choices and multiple ideas!

PROGRAMME IN FOCUS THURSDAY, 28 JUNE 2018 8.00 h Registration and handover of conference documents 9.00 h Welcome and conference introduction Andrea Huber, Automotive Circle, DE IMPULSE 9.15 h Complexity challenges for Information Security in the digital factory Strategies to prevent a downfall Dr. Heiko Roßnagel, Fraunhofer Institute for Industrial Engineering IAO, DE DIGITISATION AND BIG DATA IN THE PAINT SHOP 9.45 h Eco+Paintshop 4.0 Sustainability in a modern paint shop Johannes T. Grobe, Dürr Systems AG, DE 10.15 h Renault Digital Manufacturing: Transformation and its application to paint shop Christophe Mineur, Renault S.A.S., FR 10.45 h Coffee & contacts 11.15 h Digitisation Porsche production 4.0 in the paint shop Kay Rupp, Ralf-Jürgen Keller, Dr. Ing. h. c. F. Porsche AG, DE INFLUENCE OF E-MOBILITY TO THE PAINTING PROCESSES 11.45 h How e-mobility drives new coating solutions Dr. Peter Kuhm, Henkel AG & Co. KGaA, DE 12.15 h E-mobility New solutions for complex problems utilizing advanced coating technology Andy Pope, PPG Business Support Srl, FR 12.45 h Lunch INNOVATIVE TECHNOLOGIES AND ENVIRONMENTALISM 14.00 h Characteristic features of sustainable coating models A comprehensive outlook of future developments Dr. Matthias Harsch, LCS Life Cycle Simulation GmbH, DE 14.30 h The Energy Independence Day: Achieved the lowest consumption target on the market three years in advance Dr. Davide Menci, Geico Spa, IT 15.00 h Overspray-free painting First use of process-integrated contrast painting Thomas Heußer, Audi AG, DE; Dr. Hans Schumacher, Dürr Systems AG, DE 15.30 h Coffee & contacts incl. Audi car body presentation 16.00 h Think Blue. Factory Environmental and sustainable painting processes at Volkswagen Jan-Hendrik Schneider, Volkswagen AG, DE 16.30 h Development of paints robust for a wider application window Hironori Tonomura, Kansai Paint Co., Ltd., JP 17.00 h Sustainability aspects of cavity preservation The development of flooding wax technology N. N., Audi AG, DE; Dr. Karsten Lessmann, Pfinder KG, DE 17.30 h LIVE POLL SESSION 17.45 h End of conference day 1 18.30 h Bus shuttle to the Networking Night 19.00 h Networking Night at the Spreespeicher, Stralauer Allee 2, 10245 Berlin with live broadcast of the FIFA World Cup

FRIDAY, 29 JUNE 2018 INTERNATIONAL PROJECTS PROGRAMME UPDATES AT www.automotive-circle.com 9.00 h Towards the paint shop of the future Christophe Guesdon, Danuta Ulfig, Groupe PSA, FR 9.30 h WORKSHOPS Choose your topics via the live poll session 10.45 h Coffee & contacts REGISTER NOW 11.15 h Presentation of workshop results 11.30 h Development of omnidirectional, structural blue colour for Lexus Hidetaka Asano, Toyota Motor Company, JP 12.00 h Quantifying the consumer experience: Advances in scratch measurement help design the next generation of automotive OEM clear coats Dr. Deep Bhattacharya, Eastman Chemical Company, US; Nadia Benhamida, Hyundai- Kia America Technical Center Inc., US THE CONFERENCE IS AIMED AT: Paint shop engineers responsible for developing and establishing new strategies, concepts, structures, processes and systems; Paint shop managers, related division and department managers at OEM, as well as at tier 1 and tier 2 suppliers or service providers. 12.30 h Lunch 13.45 h Wheatering aging test method evolution in FCA Mauro Antico, FCA Italy S.p.A, IT; Paolo Quaglia, PPG Italia Business Support Srl, IT 14.15 h Application of waterborne SSD in roof: Introduction in paint shop Per-Ola Ryding, Volvo Car Corporation, SE; Harald Becker, Eftec AG, CH 14.45 h Farewell and end of conference Andrea Huber, Automotive Circle, DE Subject to change (status as of 25 April 2018) CONFERENCE FEES Early-Bird: 1.895, * (for registrations received by 27 May 2018) Standard: 1.995, * *plus 19% German VAT CONFERENCE VENUE & HOTEL Pullman Berlin Schweizerhof Budapester Straße 25 10787 Berlin, Germany T +49 30 2696-0 h5347@accor.com Online hotel reservation via our website. TERMS & CONDITIONS Information and registration at www.automotive-circle.com YOUR CONTACT Jeanette Timner Event Manager Automotive Circle T +49 511 9910-376 jeanette.timner@vincentz.net Pictures: apfelweile/fotolia.com, rawpixel/fotolia.com

Vincentz Network GmbH & Co. KG Automotive Circle // Plathnerstr. 4c // DE-30175 Hannover INTERNATIONAL OEM ADVISORY BOARD Thomas Heußer Audi AG, DE Dr. Jürgen Stiegler BMW Group, DE Dr. Bernadette Peters Daimler AG, DE Roberto Selvestrel FCA Italy S.p.A., IT André Thierig Ford-Werke GmbH, DE Chris Globe Jaguar Land Rover Ltd., GB Christophe Gruat Groupe PSA, FR Rudolf Betz Dr. Ing. h.c. F. Porsche AG, DE Anne-Catherine Basset Renault S.A.S., FR Takashi Suzuki Toyota Motor Corporation, JP Christian Hacker Volkswagen AG, DE INTERNATIONAL RELATION OFFICER MEET THE LEADING OEM NETWORK Bernhard Woll