THE HARDEST GANG IN TOWN.

HAMMERS THE HARDEST GANG IN TOWN. When we do something, then we do it right. That is why our haers are how tools for craftspeople should be: robust, powerful and durable. Our complete range of haers is shown on the following pages. You are certain to find your power package for the toughest applications: Metabo. Work. Don t play. 12

HAMMERS 13

HAMMERS LET THE MACHINE DO THE WORK. Metabo has one of, if not the widest SDS haer range impacts allowing the user to effortlessly drive the bit in the market. Our haers hit hard and are perfect for or chisel into masonry. Metabo haers are versatile, working in hard materials such as stone or concrete. The robust, ergonomic, powerful and reliable, all properties pneumatic haer mechanism generates high-energy that the trade demands. Control indicator To prevent unintentional restart and brush wear. Rubber-coated handle For fatigue-free work. Vario Tacho Constamatic (VTC) electronics For the pre-selection and maintenance of the speed. Marathon motor with coil guard The special coil guard and the epoxy resin powder coating on the coil winding makes the motor completely impervious to harmful dust. The Metabo coil guard also provides extra protection against the abrasive effect of dust. Metabo Quick drill chuck change haer chuck for SDS drilling and chiselling Quick-action keyless chuck for drilling and screw-driving Metabo S-automatic torque limiting clutch For limiting any sudden reverse torque. Die cast aluminium gear housing Increases the service life of the machine. The machine is more robust and dissipates heat faster. Infinitely variable speed control Always the right speed. Depending on the workpiece and the material. More intelligent drilling with Metabo Contact The tool stops automatically as soon as the drill tip touches a conductive, earthed material (only in KHE 26 Contact). 14 Protection against theft by Metabo The electronic security system protects against theft and unauthorised use. More relaxed working due to ergonomics Ideal adaptation of the design to the user s needs enables safe, comfortable and fatiguefree work. Optimised haer mechanism The already tried and tested Metabo haer mechanism has been adapted for the Marathon motor and even further improved. This ensures maximum drilling performance.

HAMMERS Which is the right rotary haer for you? Haer drilling in concrete/stone (Ø ) 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 35 40 45 Multihaers Rotary haers Combination haers Chipping haers ideal range possible range Drilling in metal wood max. Ø 13/8 30/20 1 st /2 nd Gear 16/8 40/20 1 st /2 nd Gear Chiselling light heavy Type and output UHE 22 Multi 2,2 J UHE 28 Multi 2,4 J NEW 10 20 BHE 20 17 Compact 1,6 J BHE 22 13 30 18 1,8 J BHE 24 13 30 18 2,2 J BHE 26 13 40 18 2,3 J KHE 26 2,3 J 13 40 19 KHE 26 13 40 Contact 2,3 J 19 KHE 28 2,5 J 13 40 19 KHE 32 3,5 J 16 40 20 KHE 55 9 J 24 KHE 75 10 J Variants Page 24 MHE 65 25 10 J MHE 95 25 25 J 16 16 HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 15

MULTIHAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS Plus shank end or cylindrical shaft (without impact) Haer stop Rotation stop Metabo "Quick" drill chuck change Clockwise and anticlockwise rotation Thumbwheel for preselection of speed Robust Metabo Marathon motor Two-speed gear unit Pneumatic high-performance haer mechanism Die cast aluminum gear housing Ergonomic housing design for fatigue-proof operation Rubber-coated handle Rubber coated additional handle with drill depth-stop Metabo S-automatic torque limiting clutch Metabo winding protection grid Auto-stop carbon brushes... with the Metabo system, protects against theft and unauthorised use at the touch of a button You can find the Metabo cordless rotary haers for working without cables on page 78. UHE 22 Multi UHE 28 Multi Multi-Purpose Haer UHE 22 Multi Multi Purpose Haer UHE 28 Multi Special advantages Metabo system: electronic anti-theft system, activated by key (accessory) Variospeed (V) electronics Vario Tacho Constamatic (VTC) full-wave electronics Overload protection No-volt release switch Brush wear indicator Comparative device characteristics Torque 15 Nm/6 Nm 22 Nm/8 Nm Drilling diameter in - Concrete with haer bits 22 28 - Brickwork with drill bits 80 - Steel 13 /8 16 /8 - Softwood 30 /20 40 /20 No-load speed 0-1.050/0-2.900 /min 0-950/0-2.600 /min Rated input power 705 W 1.010 W Output power 410 W 600 W Rated load speed 700/1.900 /min 950/2.600 /min Maximum impact rate 4.800 /min 4.400 /min Single-blow energy 0-2,2 J 0-2,4 J Collar diameter 43 43 Bit retainer SDS Plus SDS Plus Chuck capacity 1,5-13 m 1,5-13 Weight 2,7 kg 2,8 kg Standard equipment Haer chuck for tools with SDS Plus shank bit, quick-action keyless chuck for tools with cylindrical shafts, additional handle, drill depth stop, carry case Haer chuck for tools with SDS Plus shank bit, quick-action keyless chuck for tools with cylindrical shafts, additional handle, drill depth stop, carry case Type UHE 22 Multi UHE 28 Multi 6.00693 6.00361 16

ROTARY HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS Plus shank bit With the appropriate accessories, it is also suitable for bits and accessories with straight shafts (no impact) Haer stop Clockwise and anticlockwise rotation Variospeed (V) electronics Pneumatic high-performance haer mechanism Sheathed die cast aluminium gear housing Optimum weight distribution by L shape Comparative device characteristics Torque 8 Nm Drilling diameter in - Concrete with haer bits 20 - Steel 10 - Softwood 20 No-load speed 0-1.000 /min Rated input power 450 W Output power 150 W Rated load speed 800 /min Maximum impact rate 4.900 /min Single-blow energy 0-1,6 J Weight (without mains cable) 2,1 kg Standard equipment Type Accessories BHE 20 Compact NEW Electronic Rotary Haer BHE 20 Compact Haer chuck for tools with SDS Plus shank bit, additional handle, plastic case BHE 20 Compact 6.00402 Scaffolding hook 6.25070 Scaffolding hook with simple snapon connection for hanging the machine securely on scaffoldings or ladders etc Ergonomic housing design for fatigue-proof operation Rubber-coated handle Additional VibraTech handle for vibration damping Metabo S-automatic torque limiting clutch Scaffolding hook (accessory) for hanging the machine on scaffoldings or ladders HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 17

ROTARY HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS Plus shank bit With the appropriate accessories, it is also suitable for bits and accessories with straight shafts (no impact) Haer stop Clockwise and anticlockwise rotation Robust Metabo Marathon motor Pneumatic high-performance haer mechanism Die cast aluminum gear housing Ergonomic housing design for fatigue-proof operation Rubber-coated handle Rubber coated additional handle with drill depth-stop Metabo S-automatic torque limiting clutch Metabo winding protection grid Auto-stop carbon brushes... with the Metabo system, protects against theft and unauthorised use at the touch of a button BHE 22 BHE 24 BHE 26 Electronic Rotary Haer BHE 22 Electronic Rotary Haer BHE 24 Electronic Rotary Haer BHE 26 Special advantages Metabo system: electronic anti-theft system, activated by key (accessory) Metabo "Quick" drill chuck change Variospeed (V) electronics Vario Tacho Constamatic (VTC) full-wave electronics no-volt release switch brush wear indicator Comparative device characteristics Torque 11 Nm 11 Nm 16 Nm Drilling diameter in - Concrete with haer bits 22 24 26 - Steel 13 13 13 - Softwood 30 30 40 No-load speed 0-1.000 /min 0-1.000 /min 0-1.000 /min Rated input power 660 W 705 W 750 W Output power 370 W 410 W 430 W Rated load speed 750 /min 750 /min 1.000 /min Maximum impact rate 4.600 /min 4.600 /min 4.600 /min Single-blow energy 0-1,8 J 0-2,2 J 0-2,3 J Weight (without mains cable) 2,4 kg 2,4 kg 2,6 kg Standard equipment Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, plastic case Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, plastic case Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, plastic case Type BHE 22 BHE 24 BHE 26 6.00242 6.00243 6.00336 18

COMBINATION HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS Plus shank bit With the appropriate accessories, it is also suitable for bits and accessories with straight shafts (no impact) Haer stop Rotation stop Clockwise and anticlockwise rotation Metabo "Quick" drill chuck change Robust Metabo Marathon motor Pneumatic high-performance haer mechanism... with the Metabo system Special advantages Metabo "Contact" Technology Metabo system: electronic anti-theft system, activated by key (accessory) Vario Constamatic (VC) full-wave electronics Vario Tacho Constamatic (VTC) full-wave electronics Thumbwheel for preselection of speed Die cast aluminum gear housing Ergonomic housing design for fatigue-proof operation Rubber-coated handle R ubber coated additional handle with drill depth-stop Metabo S-automatic torque limiting clutch Metabo winding protection grid Auto-stop carbon brushes Brush wear indicator KHE 26 KHE 26 Contact KHE 28 No-volt release switch Comparative device characteristics Torque 16 Nm 16 Nm 20 Nm Drilling diameter in - Concrete with haer bits 26 26 28 - Concrete with milling bits - Brickwork with drill bits 65 65 80 No-load speed 0-1.000 /min 0-1.050 /min 0-1.000 /min Rated input power 800 W 800 W 1.010 W Output power 450 W 450 W 610 W Rated load speed 1.000 /min 830 /min 1.000 /min Maximum impact rate 4.600 /min 4.830 /min 4.600 /min Single-blow energy 0-2,3 J 0-2,3 J 0-2,5 J Collar diameter 43 43 43 Bit retainer SDS Plus SDS Plus SDS Plus Weight (without mains cable) 2,7 kg 2,7 kg 2,7 kg Standard equipment... with the Metabo system, protects against theft and unauthorised use at the touch of a button Electronic Combination Haer KHE 26 Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, carry case Electronic Combination Haer KHE 26 Contact Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, carry case Electronic Combination Haer KHE 28 Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, carry case Type KHE 26 KHE 26 Contact KHE 28 6.00337 6.00244 6.00338 HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 19

COMBINATION HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS Plus shank bit With the appropriate accessories, it is also suitable for bits and accessories with straight shafts (no impact) Haer stop Rotation stop Metabo system: electronic anti-theft system, activated by key (accessory) Clockwise and anticlockwise rotation Metabo "Quick" drill chuck change Vario Tacho Constamatic (VTC) full-wave electronics Robust Metabo Marathon motor Pneumatic high-performance haer mechanism Die cast aluminum gear housing Rubber-coated handle Rubber coated additional handle with drill depth-stop Torque limiting clutch Auto-stop carbon brushes Brush wear indicator... with the Metabo system, protects against theft and unauthorised use at the touch of a button KHE 32 Electronic Combination Haer KHE 32 Comparative device characteristics Torque 25 Nm Drilling diameter in - Concrete with haer bits 32 - Brickwork with drill bits 80 No-load speed 0-780 /min Rated input power 900 W Output power 480 W Rated load speed 780 /min Maximum impact rate 3.800 /min Single-blow energy 0-3,5 J Bit retainer SDS Plus Weight (without mains cable) 3,5 kg Standard equipment Haer chuck for tools with SDS Plus shank bit, additional handle, drill depth stop, carry case Type KHE 32 6.00332 20

COMBINATION HAMMERS, CHISEL HAMMERS ACCESSORIES WITH SDS PLUS SHANK END UHE 22 Multi, UHE 28 Multi, BHE 20 Compact, BHE 22, BHE 24, BHE 26, KHE 26, KHE 26 Contact, KHE 28 and KHE 32 Carbide haer drill bit, SDS Plus, "pro 4", 2 cutters Latest generation carbide: long service life, quicker, no problem when cutting on steel reinforcements. The new cutting geometry on the chisel-shaped bit heat ensures quick penetration in the toughest concrete and in granite. Easy centring. The new 4-spiral helix with its large geometry ensures quick delivery of bore dust, reduces friction in drilled hole, improves the vibration behaviour. For use in concrete, masonry, natural stone with UHE 22 Multi, UHE 28 Multi, KHE 26, KHE 26 Contact, KHE 28 and KHE 32 Working length or Packing unit Self-service packaging 4 50 110 1 6.31780 5 50 110 1 6.31820 5 80 140 1 6.30511 5 100 160 1 6.31821 5 150 210 1 6.31864 5,5 50 110 1 6.31822 5,5 100 160 1 6.31823 6 50 110 1 6.31824 6 100 160 1 6.31825 6 150 210 1 6.31826 6 200 260 1 6.31866 6,5 50 110 1 6.31827 6,5 100 160 1 6.31828 6,5 150 210 1 6.31879 6,5 200 260 1 6.31876 6,5 250 310 1 6.31868 6,5 350 400 1 6.31785 7 50 110 1 6.31829 7 100 160 1 6.31830 7 150 210 1 6.31831 8 50 110 1 6.31832 8 100 160 1 6.31833 8 150 210 1 6.31834 8 200 260 1 6.31835 8 400 460 1 6.31788 8 550 600 1 6.31789 9 150 210 1 6.31836 + Other tools with SDS Plus shank bit for haer drill bits with ratio thread Tools for non-impact work Tools for non-impact work Working length Carbide haer drill bit with SDS Plus shank bit Packing unit 10 50 110 1 6.31837 10 100 160 1 6.31838 10 150 210 1 6.31839 10 200 260 1 6.31840 10 250 310 1 6.31841 10 400 450 1 6.30519 10 550 600 1 6.31793 10 950 1.000 1 6.31794 11 100 160 1 6.31842 11 200 260 1 6.31843 12 100 160 1 6.31844 12 150 210 1 6.31845 12 200 260 1 6.31846 12 410 450 1 6.30526 12 550 600 1 6.30527 12 950 1.000 1 6.31797 13 100 160 1 6.31847 13 200 260 1 6.31848 14 100 160 1 6.31849 14 150 210 1 6.31850 14 200 260 1 6.31851 14 250 310 1 6.31852 14 400 450 1 6.31801 14 550 600 1 6.30528 14 950 1.000 1 6.31802 15 200 260 1 6.31853 15 400 450 1 6.31803 16 100 160 1 6.31854 16 150 210 1 6.31855 16 250 310 1 6.31856 16 400 450 1 6.30531 16 550 600 1 6.30532 16 750 800 1 6.31804 16 950 1.000 1 6.31805 Packed loosely 4 50 110 10 6.25230 5 50 110 10 6.25231 5 100 160 10 6.25232 6 50 110 10 6.25233 6 100 160 10 6.25234 6 150 210 10 6.25235 8 50 110 10 6.25236 8 100 160 10 6.25237 8 150 210 10 6.25238 HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 21

COMBINATION HAMMERS, CHISEL HAMMERS Working length Packing unit 10 50 110 10 6.25239 10 100 160 10 6.25240 10 150 210 10 6.25241 10 200 260 10 6.25242 12 100 160 10 6.25243 12 150 210 10 6.25244 12 200 260 10 6.25245 14 100 160 10 6.25246 14 150 210 10 6.25247 14 200 260 10 6.25248 Carbide-tipped haer drill bit, SDS Plus, 2 cutters Working length Packing unit 16 200 250 1 6.31701 16 400 450 1 6.31702 18 200 250 1 6.31703 18 400 450 1 6.31704 20 200 250 1 6.31705 20 400 450 1 6.31706 22 400 450 1 6.31707 24 200 250 1 6.31708 24 400 450 1 6.31709 25 400 450 1 6.31710 28 400 450 1 6.31711 30 400 450 1 6.31712 32 400 450 1 6.31713 Carbide-tipped haer drill bit, SDS Plus, "pro 4" The slim, chisel-shaped bit head enables fast penetration into the material to be drilled The continuous core reinforcement ensures stability and durability. It enables maximum energy transmission from haer to drill tip. Friction and vibration are reduced and user and machine are relieved by the narrow back spacers State-of-the-art thermal treatment and surface sealing by shotblasting ensure the prevention of wear on surfaces and make the drill resistant against bending For use in concrete, masonry, natural stone 4-piece, in small plastic case Ø 5, 6, 8,10, L = 110/160 5-piece, in small plastic case Ø 5, 6, 6, 8, 10, L = 160 7-piece, in small metal case Ø 5, 6, 6, 8, 8, 10, 12, L = 110/160/165 6.30580 6.30581 6.30584 Working length Packing unit 18 150 200 1 6.30533 18 250 300 1 6.31806 18 400 450 1 6.30589 18 550 600 1 6.31807 18 950 1.000 1 6.31808 19 150 200 1 6.30534 19 400 450 1 6.30535 20 150 200 1 6.30536 20 250 300 1 6.30590 20 400 450 1 6.30537 20 550 600 1 6.31809 20 950 1.000 1 6.31810 22 200 250 1 6.30538 22 400 450 1 6.30539 22 550 600 1 6.31811 22 950 1.000 1 6.31812 23 200 250 1 6.31813 24 200 250 1 6.30540 24 400 450 1 6.30541 25 200 250 1 6.31814 25 400 450 1 6.30549 25 550 600 1 6.31815 25 950 1.000 1 6.31816 26 200 250 1 6.30542 26 400 450 1 6.30548 Carbide-tipped haer drill bit, SDS Plus, 4 cutters Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill Quick boring dust discharge through short spiral inlets and large boring dust grooves of optimised double delivery helix The 4-cutter geometry protects the drill on contacting iron reinforcement and helps prevent damage to the bit head For use in concrete, masonry, natural stone Chisel with SDS-Plus shank end Chisel shape 5-piece, combo plastic case Ø 6, 8, 10 haer drill bit, pointed chisel (6.31421), flat chisel (6.31420) Cutting width 6.30599 Pointed chisels, round tip 250 6.30992 Pointed chisels, square tip 250 6.31421 Flat chisels 250 20 6.31420 Scaling chisels 250 40 6.31425 Chasing gouges 250 22 6.31422 Joint chisels, carbidetipped Joint chisels, carbidetipped 130 6.31423 200 6.31424 Tile chisels, offset 250 40 6.31456 22

COMBINATION HAMMERS, CHISEL HAMMERS Chisel assortment with SDS Plus shank end Chiselling attachment SDS Plus drill bit/chiselling bit set 6.30477 (5-piece) consisting of haer drill bits of Ø 6, 8, 10 (1 each), 1 pointed chisel (6.31421) and 1 flat chisel (6.31420) Plastic round box SDS Plus chiselling bit set (3-piece) comprising 1 pointed chisel (6.31421), 1 flat chisel (6.31420) and 1 scaling chisel (6.31425) each Plastic round box SDS Plus chiselling bit set (5-piece) comprising 2 pointed chisels (6.31421), 2 flat chisels (6.31420) and 1 scaling chisel (6.31425) Plastic round box In order to work without rotary motion with the chisels 6.31420, 6.31421, 6.31422, 6.31423, 6.31424, 6.31425 and 6.31426 you must use the chiselling attachment 6.31409. Carbide-tipped core cutters, M 16 female thread 6.30478 6.30484 6.31409 Optimised with larger carbide-tipped teeth for longer service life. Higher power efficiency due to stably, thin-walled bit body. For concrete and masonry Working length 25 55 6.23390 30 55 6.23391 35 55 6.23392 40 55 6.23393 50 55 6.23394 68 55 6.23395 82 55 6.23396 90 55 6.23397 100 55 6.23398 112 55 6.23399 Carbide-tipped pilot drill for core cutters NEW 8 120 6.27019 Anchor-head holders with M14 male thread Anchor-head holder SW 11 : 78 Anchor-head holder SDS Plus : 105 Anchor-head holder SDS Plus : 220 6.27015 6.27016 6.27017 Accessories Connection piece 6.30928 with 1/2"-20 UNF thread for the holder bit 6.30283 for haer drill bits with ratio thread and core cutters Connection piece for haer drill bits with ratio thread and for fitting the core bit using the pilot drill 6.23038 Connection piece with thread 1/2"-20 UNF for drill chuck and hexagon socket recess 1/4" (6.35 ) for screwdriver bits with bit retaining bush Bit retaining bush for fitting bits and sockets with 1/4" (6.35 ) hexagon in the spindle of drills and impact drills with spindle thread 1/2" -20 UNF and hexagon socket recess 1/4" (6.35 ) Geared chuck Clamping width: 1,5-13 Female thread: 1/2" -20 UNF Key size: 2 Integral chuck for rotary haers Accessories 6.30283 6.31285 6.31281 6.35035 SDS Plus haer chuck 6.31920 for accessories with SDS Plus shank end (UHE 22, UHE 28 Multi, BHE 24, BHE 26, KHE 26 Contact, KHE 28) Quick-action keyless chuck with adapter 6.31921 for accessories with cylindrical shank end (UHE 22, UHE 28, BHE 24, BHE 26, KHE 26, KHE 26 Contact, KHE 28) Capacity: 1.5-13 Geared chuck with adapter 6.31924 for accessories with cylindrical shank end (UHE 22, UHE 28, BHE 24, BHE 26, KHE 26, KHE 26 Contact, KHE 28) Capacity: 1.5-13 SDS Plus haer chuck 6.31922 for accessories with SDS Plus shank end (for KHE 32) Quick-action keyless chuck with adapter 6.31923 for accessories with cylindrical shank end (for KHE 32) Chuck capacity: 1-13 Code! Key 6.22500 for protection of Metabo machines (with configuration) from misuse Theh complete Metabo tool park (with configuration) can be protected with a single protected with key Safety goggles 6.31075 with non-fogging lens Replacement lens for safety goggles 6.31159 31075 Special grease for tool shank end 6.31800 for shank ends of haer bits, chisels, adapters, ; prevents friction and wear coefficient; bio-degradable high resistance to aging, high resistance to heat, high anti-corrosion properties HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 23

COMBINATION HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS-max shank bit With the appropriate accessories, it is also suitable for bits and accessories with spline shank bit or ratio thread R otation stop Metabo system: electronic anti-theft system, activated by key (accessory) Vario Tacho Constamatic (VTC) full-wave electronics Thumbwheel for preselection of speed Pneumatic high-performance haer mechanism Magnesium die cast gear housing Dust seal protects from the finest dust particles Ergonomic housing design for fatigue-proof operation Rubber-coated handle Torque limiting clutch Auto-stop carbon brushes... with the Metabo system, protects against theft and unauthorised use at the touch of a button... with the Metabo system, protects against theft and unauthorised use at the touch of a button KHE 55 KHE 75 Electronic Combination Haer KHE 55 Electronic Combination Haer KHE 75 Special advantages Extra handle with drill depth-stop Brush wear indicator Comparative device characteristics Torque 60 Nm 65 Nm Drilling diameter in - Concrete with haer bits 40 45 - Concrete with milling bits 80 80 - Brickwork with drill bits 90 100 No-load speed 135-275 /min 140-280 /min Rated input power 1.050 W 1.150 W Output power 590 W 690 W Rated load speed 275 /min 280 /min Maximum impact rate 2.600 /min 2.650 /min Single-blow energy 1-9 J 1-10 J Collar diameter 58 58 Bit retainer SDS-max SDS-max Weight (without mains cable) 5,9 kg 6,4 kg Standard equipment Additional handle, drill depth stop, lubricant for tool shank end, duster, carry case Additional handle, drill depth stop, lubricant for tool shank end, duster, carry case Type KHE 55 KHE 75 6.00055 6.00275 24

CHIPPING HAMMERS EQUIPMENT FEATURES Suitable for bits and accessories with SDS-max shank bit Metabo system: electronic anti-theft system, activated by key (accessory) Vario Tacho Constamatic (VTC) full-wave electronics Thumbwheel for preselection of impact rate Pneumatic high-performance haer mechanism Magnesium die cast gear housing Ergonomic housing design for fatigue-proof operation... with the Metabo system, protects against theft and unauthorised use at the touch of a button Special advantages Dust seal protects from the finest dust particles Chisel can be fixed in 8 positions Chisel can be fixed in 12 positions Brush wear indicator MHE 65 MHE 95 Comparative device characteristics Rated input power 1.150 W 1.500 W Output power 690 W 750 W Maximum impact rate 2.650 /min 2.040 /min Single-blow energy 1-10 J 5-25 J Bit retainer SDS-max SDS-max Weight (without mains cable) 5,7 kg 9,8 kg Standard equipment Electronic Chipping Haer MHE 65 Stoppable switch Rubber-coated handle Auto-stop carbon brushes Additional handle 360 rotatable... with the Metabo system, protects against theft and unauthorised use at the touch of a button Pointed chisel, additional handle, lubricant for tool shank end, duster, plastic case Electronic Chipping Haer MHE 95 Pointed chisel, additional handle, lubricant for tool shank end, duster, plastic case Type MHE 65 MHE 95 6.00265 6.00095 HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 25

COMBINATION HAMMERS, CHISEL HAMMERS ACCESSORIES WITH SDS-MAX SHANK END for carbide-tipped haer drills with sds plus shank bit for carbide-tipped haer drills with splined shank bit Carbide haer drill bit, SDS-max, 4 blades Carbide haer drill bit, SDS-max, 2 blades Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening. The additional 2 auxiliary cutters protect the drill on contacting iron reinforcement and helps prevent damage to the bit head. For use in concrete, masonry, natural stone Working length 16 200 340 6.23317 16 400 540 6.23318 18 200 340 6.23319 18 400 540 6.23320 20 200 320 6.23321 20 400 520 6.23322 20 800 920 6.23323 22 200 320 6.23324 22 400 520 6.23325 22 800 920 6.23326 24 400 520 6.23328 24 200 320 6.23327 25 200 320 6.23329 25 400 520 6.23330 25 800 920 6.23331 28 250 370 6.23332 28 450 570 6.23333 28 550 670 6.23334 30 250 370 6.23335 30 450 570 6.23339 32 250 370 6.23340 32 450 570 6.23341 32 800 920 6.23342 35 250 370 6.23343 35 450 570 6.23344 35 550 670 6.23345 38 250 370 6.23346 38 450 570 6.23347 40 250 370 6.23348 40 450 570 6.23349 40 800 920 6.23350 45 450 570 6.23337 52 450 570 6.23338 Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening. For use in concrete, masonry, natural stone Working length 12 200 340 6.23310 12 400 540 6.23311 12 550 690 6.23312 14 200 340 6.23313 14 400 540 6.23314 15 200 340 6.23315 15 400 540 6.23316 Carbide-tipped drill bits (one-piece) with SDS-max 45 550 6.23375 45 990 6.23376 55 550 6.23377 55 990 6.23378 65 550 6.23379 65 990 6.23380 80 550 6.23381 80 990 6.23382 Chisel with SDS-max shank Chisel shape Cutting width Pointed chisels, round tip 280 6.23351 Pointed chisels, round tip 400 6.23352 Pointed chisels, round tip 600 6.23358 Flat chisels 280 25 6.23353 Flat chisels 400 25 6.23354 Flat chisels 600 25 6.23359 26

COMBINATION HAMMERS, CHISEL HAMMERS Chisel shape Cutting width Scaling chisels 400 50 6.23355 Scaling chisels 300 80 6.23356 Scaling chisels 350 115 6.23366 Chasing gouges 300 26 6.23357 Channel chisels 300 32 6.23365 Tile chisels, offset 400 50 6.23367 Toothed chisels 300 32 6.23368 Mortar chisels 300 10 6.23369 Spade chisels 400 110 6.23383 Asphalt cutters 400 90 6.23384 Gouge chisels 380 35 6.23385 Stake drivers 260 16,5 6.23386 Stake drivers 260 13 6.23387 Tool holder 220 6.23389 Stocker plate 45 x 45, 7 x 7 teeth Stocker plate 45 x 45, 5 x 5 teeth Stamper plate 150 x 150 Chisel assortment with SDS-max shank bit SDS-max chisel bit set (5-piece) comprising 2 pointed chisels (6.23352), 2 flat chisels (6.23354) and 1 scaling chisel (6.23355) Plastic round box SDS-max chisel bit set (5-piece) comprising 3 pointed chisels (6.23352), 2 flat chisels (6.23354) Plastic round box 6.23454 6.23453 6.23456 6.30488 6.30489 Connection pieces Connection piece SDS-max/ SDS Plus 6.23371 Connection piece SDS-max/ spline shank 6.23372 Connection piece spline shank/ 6.23373 SDS-max Connection piece spline shank/ SDS Plus 6.30276 ACCESSORIES WITH RATIO THREAD Carbide-tipped drill bits with ratio thread 40 150 6.23301 45 150 6.23302 55 150 6.23303 68 150 6.23304 80 150 6.23305 Anchor-head holder for carbide-tipped 6.23299 milling bits with ratio female and male thread Ratio threaded peg 6.23027 Carbide-tipped core cutters with ratio thread Sturdy universal tool for hard work in concrete and other building materials Working length 40 100 6.23033 50 100 6.23034 68 100 6.23035 80 100 6.23036 90 100 6.23037 100 100 6.23032 125 100 6.23031 Pilot drill for ratio thread Connection pieces Pilot drill 12 x 155, ratio thread for work with the carbide-tipped core cutters with ratio thread 6.23038 Connection piece SDS-max/ ratio 6.23370 Connection piece with ratio female thread and SDS-max shank bit, length 195, for the anchorhead holder 6.23299 of milling bits and for mounting drilling bits with the help of the centring drill 6.23038 Connection piece, SW 19/ ratio 6.23374 HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 27

COMBINATION HAMMERS, CHISEL HAMMERS ACCESSORIES WITH HEXAGON SHANK END Carbide-tipped haer drill bit with hexagon shank end, SW 19 x 82.5 (with collar) Carbide-tipped drill bits (one-piece) with hexagon shank end SW 19 x 82.5 Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction in driller hole, meaning longer life for the drill. Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening. The additional 2 auxiliary cutters protect the drill on contacting iron reinforcement and helps prevent damage to the bit head. For use in concrete, masonry, natural stone Working length 55 550 700 6.23458 65 550 700 6.23459 80 550 700 6.23460 Chisel with hexagon shank end, SW 19 x 82.5 (with collar) Chisel shape Cutting width Working length Packing unit 18 250 390 1 6.23425 20 250 390 1 6.23426 22 200 340 1 6.23427 22 400 535 1 6.23428 25 200 340 1 6.23429 25 400 535 1 6.23430 25 460 600 1 6.23461 25 660 800 1 6.23462 28 250 390 1 6.23431 28 400 535 1 6.23432 32 250 390 1 6.23433 32 400 535 1 6.23434 35 250 390 1 6.23435 35 550 690 1 6.23436 40 250 390 1 6.23437 40 400 535 1 6.23438 45 400 535 1 6.23439 Pointed chisels 370 6.23440 Pointed chisels 570 6.23441 Flat chisels 370 24 6.23442 Flat chisels 570 24 6.23457 Fettling chisels 320 65 6.23449 Toothed chisels 390 32 6.23455 Spades 420 90 6.23445 Spades 640 90 6.23446 Tapered spades 420 6.23444 Asphalt cutters 460 80 6.23447 Chasing gouges, offset 320 25 6.23450 Vibration tool 110 6.23451 Tool holder 6.23452 Stocker plate 45 x 45, 7 x 7 teeth Stocker plate 45 x 45, 5 x 5 teeth 6.23454 6.23453 Stamper plate 150 x 150 6.23456 28

COMBINATION HAMMERS, CHISEL HAMMERS ACCESSORIES FOR SPLINE SHANK Carbide-tipped haer drill bit with spline shank, 2 blades Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening. For use in concrete, masonry, natural stone Working length Packing unit 12 200 330 1 6.30205 14 250 380 1 6.30211 Carbide-tipped haer drill bit with spline shank, 4 blades Syetrical construction of the head with main and auxiliary cutters ensures centric guiding in the drill hole and reduces friction, meaning longer life for the drill Short spiral inlets and large boring dust grooves in the optimised double delivery helix ensure quick boring dust discharge. Maximum energy transfer due to dynamic core strengthening. The additional 2 auxiliary cutters protect the drill on contacting iron reinforcement and helps prevent damage to the bit head. For use in concrete, masonry, natural stone Working length Packing unit 16 250 380 1 6.23400 16 400 530 1 6.23401 18 250 380 1 6.23402 19 250 380 1 6.23403 20 250 380 1 6.23404 20 400 530 1 6.23405 20 550 680 1 6.23406 22 200 330 1 6.23407 22 400 530 1 6.23408 24 200 330 1 6.23409 24 400 530 1 6.23410 25 200 330 1 6.23411 25 400 530 1 6.23412 28 250 380 1 6.23413 28 400 530 1 6.23414 28 550 680 1 6.23415 30 250 380 1 6.23416 30 400 530 1 6.23417 32 250 380 1 6.23418 32 400 530 1 6.23419 35 250 380 1 6.23420 35 400 530 1 6.23421 35 550 680 1 6.23422 38 250 380 1 6.23423 38 400 530 1 6.23424 ACCESSORIES WITH HEXAGON SHANK END Chisel with hexagon shank SW 19 (cyl. end 16.5 ) Chisel shape Cutting width Pointed chisels 300 6.23360 Pointed chisels 450 6.30380 Flat chisels 300 25 6.23361 Flat chisels 450 25 6.30381 Chasing gouges 250 6.23362 Scaling chisels 290 50 6.23363 Toothed chisels 300 30 6.23364 Joint chisels, carbide-tipped 200 38 6.30382 Dust extraction accessories for all machines with 43 collar diameter Extraction unit for work with drill bits of Ø 4-20 ; with drilling depth stop; to fasten the suction unit on the collar of the machines, one requires the handle 6.31594 Extraction unit for work with drill bits of Ø 16-40 ; with drilling depth stop; to fasten the suction unit on the collar of the machines, one requires the handle 6.31594 Handle for extraction units for fitting the extraction units on the collar of the machines Suction hose connector with internal Ø 30 and connector with outer Ø 35 6.31590 6.31591 6.31594 6.31592 Adapter 35/58 6.30316 Adapter 6.31593 HEDGE SPECIAL ROUTERS SANDING ANGLE SCREW- CORDLESS METABOXES TRIMMERS MACHINES SAWS AND PLANERS MACHINES GRINDERS DRIVERS DEVICES DRILLS IMPACT DRILLS HAMMERS 29