IES LM-79-08 TEST AND MEASUREMENT REPORT For Spectrum King LED 7751 Alabama Ave, #1 Canoga Park, CA 91304 Report Type: Original Report Product Type: High Power LED Luminaire Test Engineer Thomas Tu Report Number R16031512-10 Test Date 2016-03-30 to 2016-04-01 Report Date 2016-04-15 Reviewed By Prepared By Wayne Chu Bay Area Compliance Laboratories Corp. 1274 Anvilwood Ave Sunnyvale, CA 94089, USA Tel: (408) 732-9162, Fax: (408) 732 9164 Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk * (Rev.3)
DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 0 R16031512-10 Original Report 2016-04-15 Page 2 of 14
TABLE OF CONTENTS 1 GENERAL INFORMATION... 4 1.1 1.2 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)... 4 EUT SPECIFICATIONS... 4 1.3 EUT PHOTO... 4 1.4 1.5 STANDARDS USED... 5 TEST METHODOLOGY... 5 1.6 TEST FACILITY REGISTRATIONS... 6 1.7 1.8 TEST FACILITY ACCREDITATIONS... 7 TEST EQUIPMENT LIST AND DETAILS... 10 2 ELECTRICAL AND PHOTOMETRIC TEST RESULT... 11 2.1 2.2 INTEGRATING SPHERE AND GONIOPHOTOMETER SYSTEMS TEST CONDITION... 11 ELECTRICAL MEASUREMENT... 11 2.3 PHOTOMETRIC MEASUREMENT... 11 2.4 CHROMATICITY COORDINATE... 11 2.5 2.6 COLOR RENDERING INDEX... 11 SPECTRAL POWER DISTRIBUTION... 12 3 LUMINOUS INTENSITY TEST RESULT... 13 3.1 LUMINOUS INTENSITY DISTRIBUTION DIAGRAM... 13 3.2 LUMINOUS INTENSITY (CD) DISTRIBUTION DATA... 14 Page 3 of 14
1 GENERAL INFORMATION 1.1 Product Description for Equipment Under Test (EUT) The product models SK600+ Beast manufactured by Spectrum King LED are high power LED luminaires used for plant growing. 1.2 EUT Specifications Category Specifications No. of Sample 1 Test Model No. SK600+ Beast Manufacturer Spectrum King LED and other Brand Name Spectrum King LED Product Designation LED Luminaire used for growing plants Burning Time Before Test 0 hour Rated Voltage, Frequency, & Power 100-277V, 50-60Hz, 650W Nominal CCT 3700K Product Weight and Dimensions 9kg, 26cm (W) x 54cm (L) x 18cm (H) 1.3 EUT Photo SK600+ Beast Page 4 of 14
1.4 Standards Used IESNA LM-79-08: Approved Method: Electrical & Photometric Measurement of Solid-state Lighting Products ANSI C82.77-2002: Harmonic Emission Limits Related Power Quality Requirements for Lighting 1.5 Test Methodology Products were tested with no seasoning. All stabilization and measurements were made in compliance with IES LM-79-08. The products were operated at rated voltage or at voltage required by manufacturer. The ambient temperature of the samples was maintained at 25 C±1 C during measurement. And relative humidity is less than 65%. Integrating Sphere System The system includes AC power source, digital power meter, DC power supply, spectrophotometer, and integrating sphere. The integrating sphere system is calibrated by standard light source before measurement. The system and standard light source has been calibrated regularly and traceable to the National Primary Standards. 4π geometry was used during measurement. The product was operated in its intended orientation in application and was recorded in this report. Goniophotometer System The goniophotometer system is calibrated by standard light source before measurement. The standard light source has been calibrated regularly and traceable to the National Primary Standards. Type C goniophotometer was used for measuring luminous intensity distribution. The products were operated in its intended orientation in application and were recorded in this report. The uncertainty of the light output (luminous flux) measurements is U=2.1% (K=2), at the 95% confidence level. The uncertainty of the correlated color temperature measurements is U=32K (K=2), at the 95% confidence level. The uncertainty of the CRI is U=2.1 (K=2), at the 95% confidence level. Page 5 of 14
1.6 Test Facility Registrations BACLs test facilities that are used to perform Radiated and Conducted Emissions tests are currently recognized by the Federal Communications Commission as Accredited with NIST Designation Number US1129. BACL s test facilities that are used to perform Radiated and Conducted Emissions tests are currently registered with Industry Canada under Registration Numbers: 3062A-1, 3062A-2, and 3062A-3. BACL is a Chinese Taipei Bureau of Standards Metrology and Inspection (BSMI) validated Conformity Assessment Body (CAB), under Appendix B, Phase I Procedures of the APEC Mutual Recognition Arrangement (MRA). BACL s BSMI Lab Code Number is: SL2-IN-E-1002R BACL s test facilities that are used to perform AC Line Conducted Emissions, Telecommunications Line Conducted Emissions, Radiated Emissions from 30 MHz to 1 GHz, and Radiated Emissions from 1 GHz to 6 GHz are currently recognized as Accredited in accordance with the Voluntary Control Council for Interference [VCCI] Article 15 procedures under Registration Number A-0027. Page 6 of 14
1.7 Test Facility Accreditations Bay Area Compliance Laboratories Corp. (BACL) is: A- An independent, 3 rd -Party, Commercial Test Laboratory accredited to ISO/IEC 17025:2005 by A2LA (Test Laboratory Accreditation Certificate Number 3279.02), in the fields of: Electromagnetic Compatibility and Telecommunications. Unless noted by an Asterisk (*) in the Compliance Matrix (See Section 3 of this Test Report), BACL s ISO/IEC 17025:2005 Scope of Accreditation includes all of the Test Method Standards and/or the Product Family Standards detailed in this Test Report.. BACL s ISO/IEC 17025:2005 Scope of Accreditation includes a comprehensive suite of EMC Emissions, EMC Immunity, Radio, RF Exposure, Safety and wireline Telecommunications test methods applicable to a wide range of product categories. These product categories include Central Office Telecommunications Equipment [including NEBS - Network Equipment Building Systems], Unlicensed and Licensed Wireless and RF devices, Information Technology Equipment (ITE); Telecommunications Terminal Equipment (TTE); Medical Electrical Equipment; Industrial, Scientific and Medical Test Equipment; Professional Audio and Video Equipment; Industrial and Scientific Instruments and Laboratory Apparatus; Cable Distribution Systems, and Energy Efficient Lighting. B- A Product Certification Body accredited to ISO/IEC 17065:2012 by A2LA (Product Certification Body Accreditation Certificate Number 3279.03) to certify - For the USA (Federal Communications Commission): 1- All Unlicensed radio frequency devices within FCC Scopes A1, A2, A3, and A4; 2- All Licensed radio frequency devices within FCC Scopes B1, B2, B3, and B4; 3- All Telephone Terminal Equipment within FCC Scope C. - For the Canada (Industry Canada): 1- All Scope 1-Licence-Exempt Radio Frequency Devices; 2- All Scope 2-Licensed Personal Mobile Radio Services; 3- All Scope 3-Licensed General Mobile & Fixed Radio Services; 4- All Scope 4-Licensed Maritime & Aviation Radio Services; 5- All Scope 5-Licensed Fixed Microwave Radio Services 6- All Broadcasting Technical Standards (BETS) in the Category I Equipment Standards List. - For Singapore (Info-Communications Development Authority (IDA)): 1 All Line Terminal Equipment: All Technical Specifications for Line Terminal Equipment Table 1 of IDA MRA Recognition Scheme: 2011, Annex 2 2. All Radio-Communication Equipment: All Technical Specifications for Radio-Communication Equipment Table 2 of IDA MRA Recognition Scheme: 2011, Annex 2 - For the Hong Kong Special Administrative Region: 1 All Radio Equipment, per KHCA 10XX-series Specifications; 2 All GMDSS Marine Radio Equipment, per HKCA 12XX-series Specifications; 3 All Fixed Network Equipment, per HKCA 20XX-series Specifications. - For Japan: 1 MIC Telecommunication Business Law (Terminal Equipment): - All Scope A1 - Terminal Equipment for the Purpose of Calls; - All Scope A2 - Other Terminal Equipment 2 Radio Law (Radio Equipment): - All Scope B1 - Specified Radio Equipment specified in Article 38-2-2, paragraph 1, item 1 of the Radio Law - All Scope B2 - Specified Radio Equipment specified in Article 38-2-2, paragraph 1, item 2 of the Radio Law - All Scope B3 - Specified Radio Equipment specified in Article 38-2-2, paragraph 1, item 3 of the Radio Law Page 7 of 14
C- A Product Certification Body accredited to ISO/IEC 17065:2012 by A2LA (Product Certification Body Accreditation Certificate Number 3279.01) to certify Products to USA s Environmental Protection Agency (EPA) ENERGY STAR Product Specifications for: 1 Electronics and Office Equipment: - for Telephony (ver. 3.0) - for Audio/Video (ver. 3.0) - for Battery Charging Systems (ver. 1.1) - for Set-top Boxes & Cable Boxes (ver. 4.1) - for Televisions (ver. 6.1) - for Computers (ver. 6.0) - for Displays (ver. 6.0) - for Imaging Equipment (ver. 2.0) - for Computer Servers (ver. 2.0) 2 Commercial Food Service Equipment - for Commercial Dishwashers (ver. 2.0) - for Commercial Ice Machines (ver. 2.0) - for Commercial Ovens (ver. 2.1) - for Commercial Refrigerators and Freezers 3 Lighting Products - For Decorative Light Strings (ver. 1.5) - For Luminaires (including sub-components) and Lamps (ver. 1.2) - For Compact Fluorescent Lamps (CFLs) (ver. 4.3) - For Integral LED Lamps (ver. 1.4) 4 Heating, Ventilation, and AC Products - for Residential Ceiling Fans (ver. 3.0) - for Residential Ventilating Fans (ver. 3.2) 5 Other - For Water Coolers (ver. 3.0) D- A NIST Designated Phase-I and Phase-II Conformity Assessment Body (CAB) for the following economies and regulatory authorities under the terms of the stated MRAs/Treaties: - Australia: ACMA (Australian Communication and Media Authority) APEC Tel MRA -Phase I; - Canada: (Industry Canada - IC) Foreign Certification Body FCB APEC Tel MRA -Phase I & Phase II; - Chinese Taipei (Republic of China Taiwan): o BSMI (Bureau of Standards, Metrology and Inspection) APEC Tel MRA -Phase I; o NCC (National Communications Commission) APEC Tel MRA -Phase I; - European Union: o o EMC Directive 2004/108/EC US-EU EMC & Telecom MRA CAB Radio & Teleterminal Equipment (R&TTE) Directive 1995/5/EC US -EU EMC & Telecom MRA CAB - Hong Kong Special Administrative Region: (Office of the Telecommunications Authority OFTA) APEC Tel MRA -Phase I & Phase II - Israel US-Israel MRA Phase I - Republic of Korea (Ministry of Communications - Radio Research Laboratory) APEC Tel MRA -Phase I - Singapore: (Infocomm Development Authority - IDA) APEC Tel MRA -Phase I & Phase II; - Japan: VCCI - Voluntary Control Council for Interference US-Japan Telecom Treaty VCCI Side Letter- - USA: o ENERGY STAR Recognized Test Laboratory US EPA o Telecommunications Certification Body (TCB) US FCC; - Vietnam: APEC Tel MRA -Phase I; Page 8 of 14
Page 9 of 14
1.8 Test Equipment List and Details Device Manufacturer Models Serial Numbers Calibration Date Calibration Due Date Integrating Sphere EVERFINE 1.5m 0111466 NA See Note Diode Array Spectrometer LABSPHERE DAS-1100 05795 NA See Note Spectroradiometer EVERFINE HAAS- 2000_R5000 Goniophotometer EVERFINE GO-R5000 Standard Light Source EVERFINE D908S M108544CM53 51116 G111493TD134 1113 G119805CJ6351 114 NA NA 2015-10-09 See Note See Note Until reach 100 hours of usage Power Meter YOKOGAWA WT1600FC 91F113028 2015-08-28 2016-08-28 Power Meter EVERFINE PF310 Temperature/Humidity Chart Recorder G132150CM535 1119 2015-09-09 2016-09-09 DICKSON THDX 3188477 2016-03-01 2018-03-01 AC Power Supply EVERFINE DPS1030/V200 DC Power Supply EVERFINE WY12010 G120984T01341 114 G115809TN134 1112 2015-09-09 2016-09-09 2015-09-09 2016-09-09 Note: The calibration of the integrating sphere system and goniophotometer system, using standard lamps which have the ISO 17025 accredited calibration, meets the calibration requirements for the systems. Statement of Traceability: Bay Area Compliance Laboratories Corp. certifies that all calibration has been performed using suitable standards traceable to the NATIONAL INSTITUTE of STANDARDS and TECHNOLOGY (NIST). Page 10 of 14
2 ELECTRICAL AND PHOTOMETRIC TEST RESULT 2.1 Integrating Sphere and Goniophotometer Systems Test Condition Stabilization time: 1 hour Test ambient temperature: 24 C Test orientation: Downward 2.2 Electrical Measurement Model Voltage (V) Frequency (Hz) Current (A) Power (W) Power Factor SK600+ Beast 120.0 60.0 5.387 645.1 0.9981 2.3 Photometric Measurement Model Total Flux (lm) Radiant Flux (W) Efficacy (lm/w) CCT (K) SK600+ Beast 74710 231.4 115.8 3764 2.4 Chromaticity Coordinate Model x y u v u' v' SK600+ Beast 0.3911 0.3825 0.2298 0.3371 0.2298 0.5057 2.5 Color Rendering Index SK600+ Beast : Ra 84.6 R1 R2 R3 R4 83 90 94 83 R5 R6 R7 R8 83 86 88 69 R9 R10 R11 R12 22 75 82 64 R13 R14 R15 85 97 78 Page 11 of 14
2.6 Spectral Power Distribution SK600+ Beast : nm mw nm mw nm mw nm mw nm mw 390 1.47E+01 465 6.74E+02 540 9.83E+02 615 1.21E+03 690 2.71E+02 395 1.61E+01 470 5.46E+02 545 1.01E+03 620 1.17E+03 695 2.58E+02 400 1.76E+01 475 4.27E+02 550 1.04E+03 625 1.13E+03 700 2.04E+02 405 2.26E+01 480 3.76E+02 555 1.07E+03 630 1.09E+03 705 1.76E+02 410 3.66E+01 485 3.79E+02 560 1.10E+03 635 1.06E+03 710 1.52E+02 415 5.75E+01 490 4.10E+02 565 1.14E+03 640 1.00E+03 715 1.35E+02 420 9.21E+01 495 4.67E+02 570 1.17E+03 645 8.81E+02 720 1.15E+02 425 1.55E+02 500 5.47E+02 575 1.20E+03 650 7.70E+02 725 9.79E+01 430 2.45E+02 505 6.29E+02 580 1.23E+03 655 6.90E+02 730 8.65E+01 435 3.69E+02 510 7.04E+02 585 1.26E+03 660 6.26E+02 735 7.32E+01 440 5.38E+02 515 7.72E+02 590 1.28E+03 665 5.65E+02 740 6.65E+01 445 8.13E+02 520 8.30E+02 595 1.29E+03 670 4.92E+02 745 5.62E+01 450 1.16E+03 525 8.76E+02 600 1.30E+03 675 4.17E+02 750 4.78E+01 455 1.18E+03 530 9.16E+02 605 1.29E+03 680 3.61E+02 755 4.62E+01 460 8.74E+02 535 9.49E+02 610 1.25E+03 685 3.12E+02 760 3.75E+01 Page 12 of 14
3 Luminous Intensity Test Result 3.1 Luminous Intensity Distribution Diagram SK600+ Beast : Page 13 of 14
3.2 Luminous Intensity (cd) Distribution Data SK600+ Beast : ---END OF REPORT--- Page 14 of 14