SMTD/ SMTD/ High Performance Bi-color TOP LED <Specifications> Outer Dimension (Unit:mm) - Chip Material: AlGaInP/AlGaAs - Chip Dimension: x um / x um - Number of Chips: pcs - Peak Wavelength: nm typ. / nm typ. - Lead Frame Die: Silver Plated - Package Resin: PAT - Lens: Silicone or Epoxy Resin n m c a t h ode a n o d e c o mmo n n m c a t h ode Absolute Maximum Ratings [Tc= ] Maximum Rated Value Item Symbol nm nm Unit Power Dissipation PD mw Forward Current IF ma Pulse Forward Current* IFP ma Reverse Voltage VR V Thermal Resistance Rthja K/W Junction Temperature Tj Operating Temperature TOPR - ~ + Storage Temperature TSTG - ~ + Soldering Temperature** TSOL * Duty=% and Pulse Width=us. **Soldering condition must be completed within second at. Electro-Optical Characteristics [Tc= ] Item Forward Voltage Total Radiated Power Condition Min Typ Max Symbol VF IF=mA IF=mA.... VFP IFP=mA IFP=mA.. PO IF=mA IF=mA IFP=mA IFP=mA Unit V mw Peak Wavelength λp IF=mA IF=mA nm Half Width λ IF=mA IF=mA nm Rise Time tr IF=mA IF=mA ns Fall Time tf IF=mA IF=mA ns * Measured by S- ** Measured by CIE- Condition B Marubeni America Corporation Freedom Circle, Suite, Santa Clara, CA
SMTD/ Typical Characteristic Curves nm Forward Curent - Forward Voltage Forward Current (ma) (ta= C, tw= us, Duty=%) (A.U.) Intensity Radiant Relative. Relative Radiant Intensity - Forward Current (ta= C, tw=us, Duty=%) ma Standard....... Forward Voltage (V).. Forward Current (ma) Ifp [ma] Forward Current Forward Current - Pulse Duration khz Duration tw [ us] khz Hz Hz Forward Current(mA) Allowable Allowable Forward Current - Rthja=K/W Marubeni America Corporation Freedom Circle, Suite, Santa Clara, CA
SMTD/ nm... Forward Voltage - Ambient Temperture If=mA (A.U.) Relative Radiant Intensity - If=mA (V) Forward Voltage....... Intensity Radiant Relative. Ambient Temperatture ( C). Peak Wavelength (nm) Peak Wavelength - If=mA Relative Radiant Intensity (A.U.).......... Relative Spectral Emission (ta= C). Wavelength (nm) Marubeni America Corporation Freedom Circle, Suite, Santa Clara, CA
SMTD/ Typical Characteristic Curves nm Forward Current - Forward Voltage Forward Current (ma) (ta= C, tw=us, Duty=%) Relative Radiant Intensity (A.U.). Relative Radiant Intensity - Forward Current (ta= C, tw=us, Duty=%) ma Standard..... Forward Voltage (V).. Forward Current (ma) Ifp [ma] Forward Current Forward Current - Pulse Duration khz Duration tw [ us] khz Hz Hz Forward Current(mA) Allowable Allowable Forward Current - Rthja=K/W Marubeni America Corporation Freedom Circle, Suite, Santa Clara, CA
SMTD/ nm... Forward Voltage - Ambient Temperture If=mA (A.U.) Relative Radiant Intensity - If=mA (V) Forward Voltage....... Intensity Radiant Relative.. Peak Wavelength (nm) Peak Wavelength - If=mA Relative Radiant Intensity (A.U.).......... Relative Spectral Emission (ta= C). Wavelength (nm) Marubeni America Corporation Freedom Circle, Suite, Santa Clara, CA
SMTD/ Recommended reflow soldering profile Recommended Land Layout (Unit: mm) C [ C] Temperature C C MAX s s s s s Don t put stress on SMD and a circuit board after soldering SMD Packing Tape and Reel Dimension s (Unit: mm) Marubeni America Corporation Freedom Circle, Suite, Santa Clara, CA
SMTD/ Wrapping Moisture barrier bag aluminum laminated film with a desiccant to keep out the moisture absorption during the transportation and storage. SMD LED storage and handling precautions Storage Conditions before Opening a Moisture-Barrier Aluminum Bag Before opening a moisture-barrier aluminum bag, please store it at <ºC, <%RH. Please note that the maximum shelf life is months under these conditions. Storage Conditions after Opening a Moisture-Barrier Aluminum Bag After opening a moisture-barrier aluminum bag, store the aluminum bag and silica gel in a desiccator. After opening the bag, please solder the LEDs within hours in a room with - ºC, <%RH. Please put any unused, remaining LEDs and silica gel back in the same aluminum bag and then vacuum-seal the bag. It is recommended to keep the re-sealed bag in a desiccator at <%RH. The -hour- long floor life does not include the time while LEDs are stored in the moisture-barrier aluminum bag. However, we strongly recommend to solder the LEDs as soon as possible after opening the aluminum bag Notes about Re-sealing a Moisture-Barrier Aluminum Bag When vacuum-sealing an opened aluminum bag, if you find the moisture-indicator of the silica gel has changed to pink from blue (indicating a relative humidity of % or more), please do not use the unused LEDs, the aluminum bag, or the silica gel. Notes about Opening a Re-sealed Moisture-Barrier Aluminum Bag When opening a vacuumed and re-sealed aluminum bag in order to use the remaining LEDs stored in the bag, if you find that the moisture-indicator of the silica has changed to pink, please do not use the LEDs. Marubeni America Corporation Freedom Circle, Suite, Santa Clara, CA
SMTD/ Disclaimer Product specifications and data shown in this product catalog are subject to change without notice for the purposes of improving product performance, reliability, design, or otherwise. Product data and parameters in this catalog are typical values based on reasonably up-to-date measurements. Product data and parameters may vary by user application and over time. Products shown in this catalog are intended to be used for general electronic equipment. Products are not guaranteed for applications where product malfunction or failure may cause personal injury or death, including but not limited to life-supporting / saving devices, medical devices, safety devices, airplanes, aerospace equipment, automobiles, traffic control systems, and nuclear reactor control systems.. Marubeni America Corporation Freedom Circle, Suite, Santa Clara, CA