Description The KTLP3616 series consist of a GaAs infrared emitting diode optically coupled to an non-zero-crossing silicon bilateral TRIAC and a main output power TRIAC. These devices isolate low voltage logic from 115/240 VAC lines to provide random phase control of high current TRIACs or thyristors. These devices feature greatly enhanced static dv/dt capability to ensure stable switching performance of inductive loads. Schematic 1 2 3 4 1. Cathode 2. Anode 3. Cathode 4. Cathode 8 6 5 5. Gate 6. T1 8. T2 Features 1. Pb free and RoHS compliant 2. 600V peak blocking voltage 3. On-state R.M.S Current 1.2A 4. Simplifies logic control of 115/240 VAC power 5. Non zero voltage crossing 6. Isolation voltage between input and output (Viso:5300Vms) 7. MSL class 1 8. Agency Approvals: UL Approved (No. E169586): UL1577 c-ul Approved (No. E169586) VDE Approved (No. 40020973): DIN EN60747-5-5 Applications TRIAC driver Programmable controllers AC-output module Solid state relay Isolated interface between high voltage AC devices and lower voltage DC control circuitry Switching motors, fans, heaters, solenoids and valves. Phase or power control in applications, such as lighting and temperature control equipment Document No. 69P45003.3-1 -
3.00 2.70 0.25 ±0.2 3.50 0.30 3.50 3.00 2.70 0.10±0.1 0.25 0.40 3.50 3.50 Outside Dimension Unit:mm 1. Dual-in-line type. 2. Surface mount type. KTLP3616 KTLP3616S 7.62 6.50 9.68 7.62 6.50 9.68 0.25 13.00 13.00 1.20 0.50 2.54 1.00 10.00±0.4 0~10 1.20 2.54 3. Long creepage distance type. 4. Long creepage distance for surface mount type. KTLP3616H KTLP3616L 7.62 6.50 9.68 10.16 7.62 6.50 9.68 0.90±0.25 0.90±0.25 0~10 0.25 11.80 +0.2-0.5 1.20 2.54 10.16±0.50 1.20 0.50 2.54 2.54 TOLERANCE:±0.2mm Device Marking Notes: XXXX YWW XXXX XXXX:3616 or 3506 YWW Y:Year code / W:Week code Document No. 69P45003.3-2 -
Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Forward current I F 50 ma Input Peak forward current I FM 1 A Reverse voltage V R 6 V Power dissipation P D 70 mw Off-state output terminal voltage V DRM 600 V PEAK Output On-state R.M.S. current I T(RMS) 1.2 A Peak repetitive surge current (60Hz, Peak) I TSM 10 A Isolation voltage 1 minute V iso 5300 Vrms Operating temperature T opr -40 to +115 Storage temperature T stg -50 to +125 Soldering temperature 10 seconds T sol 260 Electro-optical Characteristics (Ta=25 ) Parameter Symbol Conditions Min. Typ. Max. Unit Forward voltage V F I F =10mA - 1.2 1.4 V Input Reverse current I R V R =4V - - 10 μa Output Peak blocking current I DRM V DRM Rated - - 100 μa On-state voltage V TM I TM =1.2A - - 3 V Holding current I H - - 25 ma Transfer characteristics Critical rate of rise of off-state voltage dv/dt V DRM =(1/ 2 )*Rated - 1000 - V/μs Isolation resistance R iso DC500V 5x10 10 - - Ω Minimum trigger current I FT Main terminal voltage=3v - - 10 ma Document No. 69P45003.3-3 -
Peak Blocking Current ( na ) Peak Forward Current IFT ( ma ) Forward Current IF ( ma ) Forward Current IF ( ma ) On-state Current ITM ( ma ) Fig.1 Forward Current e vs. Ambient Temperature 60 Fig.2 On-state R.M.S. Current vs. Ambient Temperature 1.8 50 40 30 20 1.5 1.2 0.9 0.6 10 0.3 0-40 -20 0 20 40 60 80 100 115 0-40 -20 0 20 40 60 80 100 115 Ambient Temperature Ta ( ) Ambient Temperature Ta ( ) Fig.3 Peak Forward Current vs. Duty Ratio 10000 1000 100 Pulse width <= 100us Ta=25 C Fig.4 Forward Current vs. Forward Voltage 1000 500 200 100 50 20 10 5 Ta=75 C 50 C 25 C 0 C -25 C 10 10-3 Duty Ratio 10-2 10-1 Fig.5 Trigger Current vs. Ambient Temperature IFT, Normalized 1.6 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 Normalized to Ta=25 C -40-20 0 20 40 60 80 100 115 1 2 1 0 0.5 1.0 1.5 2.0 2.5 3.0 Forward Voltage (V) Fig.6 Leakage with LED off vs. Ambient Temperature 0.1-40 -20 0 20 40 60 80 100 115 Ambient Temperature Ta ( ) Ambient Temperature Ta ( ) 100 10 1 Document No. 69P45003.3-4 -
On-state Current ITM ( A ) Fig.7 On-State characteristics +1.2 Output pulse width 80us +1.0 +0.8 +0.6 0-0.6-0.8-1.0 I =30mA, f=60hz, Ta=25 C F -1.2-3 -2-1 0 1 2 3 On-state Voltage (V) Document No. 69P45003.3-5 -
temperature Recommended Soldering Conditions (a) Infrared reflow soldering: Peak reflow soldering: 260 or below (package surface temperature) Time of peak reflow temperature: 10 sec Time of temperature higher than 230 : 30-60 sec Time to preheat temperature from 60-120 sec 180~190 : Two Time(s) of reflow: Rosin flux containing small amount of chlorine (The Flux: flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow 260 10 sec Max. 230 190 30-60 sec 180 60-120 sec t (s) (b) Wave soldering: Temperature: Time: Preheating conditions: Time(s) of reflow: Flux: 260 or below (molten solder temperature) 10 seconds or less 120 or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (c) Cautions: Fluxes: Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Avoid shorting between portion of frame and leads. Document No. 69P45003.3-6 -
2.54 2.54 1.5 1.5 Numbering System KTLP3616 X (Y) Notes: KTLP3616 = Part No. X = Lead form option ( blank S H L ) Y = Tape and reel option ( TL TR TLD TRU ) Option Description Packing quantity S (TL) surface mount type package + TL tape & reel option 1000 units per reel S (TR) surface mount type package + TR tape & reel option 1000 units per reel L (TLD) L (TRU) long creepage distance for surface mount type package + TLD tape & reel option long creepage distance for surface mount type package + TRU tape & reel option 800 units per reel 800 units per reel Recommended Pad Layout for Surface Mount Lead Form 1. Surface mount type. 2. Long creepage distance for surface mount type. 8-pin SMD 8-pin L 1.9 1.9 8.3 10.7 Unit:mm Document No. 69P45003.3-7 -
7.50 16.0±0.30 10.35 1.75 SMD Carrier Tape & Reel 4.00 2.00 unit:mm 10.35 TL 12.00 TOLERANCE:±0.2mm 0.35 4.90 TR Direction of feed from reel Direction of feed from reel 1.5 16.4 2.0 Document No. 69P45003.3-8 -
330 Max. 100±0.50 13.0 24.00±0.30 12.35 L Carrier Tape & Reel 11.50 1.75 2.00 4.00 12.00 Unit:mm 10.15?1.50 MIN 0.30 3.80 4.30 TOLERANCE:±0.2mm TLD TRU Direction of feed from reel Direction of feed from reel 24.40 30.40 Max. Document No. 69P45003.3-9 -
Application Notice The content of datasheet is the guidance for product use only. takes no responsibility to the accuracy of the information provided here. For continuously improving all of products, including quality, reliability, function...etc., reserves the right to change the specification, characteristics, data, materials, and structure of products without notice. Please contact with to obtain the latest specification. It would be required to comply with the absolute maximum ratings listed in the specification. has no liability and responsibility to the damage caused by improper use of the products. products are intended to be designed for use in general electronics application list below: a. Personal computer b. OA machine c. Audio / Video d. Instrumentation e. Electrical application f. Measurement equipment g. Consumer electronics h. Telecommunication devices shall not be used or related with equipment requiring higher level of quality / reliability, or malfunction, or failure which may cause loss of human life, bodily injury, includes, without limitation: a. Medical and other life supporting equipments b. Space application c. Telecommunication equipment (trunk lines) d. Nuclear power control e. Equipment used for automotive vehicles, trains, ships...etc. This publication is the property of. No part of this publication may be reproduced or copied in any form or any means electronically or mechanically for any purpose, in whole or in part without any written permission expressed from. Document No. 69P45003.3-10 -