Merillat Essentials Product Specifications April 2010
New products added in this issue: DeNova Beginnings Natural Granite and Natural Marble Vanity Countertops New Accessories in this issue available beginning April 27, 2010: CCK (Cabinet Care Kit) CCPC (Cabinet Cleaning and Polishing Cloths) CDC (Cabinet Dusting Cloths) Merillat cabinetry carries the seal of the Kitchen Cabinet Manufacturers Association, meaning our cabinets exceed or meet the recommended minimum construction and performance standards outlined by the American National Standards Institute (ANSI/KCMA) Specification A161.1. Masco Builder Cabinet Group is proud to demonstrate its commitment to environmental sustainability through the Environmental Stewardship Program certification, administered by the KCMA. All Masco Builder Cabinet Group facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.
Page Understanding Cabinetry Item Numbers...2 Computer Design Software...3 Door Styles... 4-6 Toespace Dimensional Details...7 Wall Cabinets... 8-10 Wall Cabinet Accessories... 11-14 Base Cabinets... 15-22 Base Cabinet Accessories... 23-28 Universal Access Cabinets....29 Tall Cabinets... 30-32 Tall Cabinet Accessories... 33, 34 Bath Cabinets... 35-41 DeNova Beginnings Vanity Countertops...41 Bath Cabinet Accessories... 42-44 Decorative Molding... 45-50 Decorative Hardware...51 Touch-Up...52 Care & Cleaning...53 Stain & Paint...53 Wall Blind Corner Details...54 Base Blind Corner Details...55 Cabinet Specifications... 56-58 Merillat Essentials 5-Year Limited Warranty...59 DeNova Beginnings Vanity Countertop Warranty...59 The Beauty of Natural Wood Statement...59 Framed Cabinet Dimensions...60 Face Frame Opening Dimensions...61 Index...62 Product Acronym Legends...63 Table of Contents WALL CABINETS / ACCESSORIES BASE CABINETS / ACCESSORIES UNIVERSAL ACCESS CABINETS TALL CABINETS /ACCESSORIES BATH CABINETS / ACCESSORIES Merillat Essentials Product Specifications for Cabinetry and Accessories Table of Contents 1 DECORATIVE MOLDING HARDWARE/ TOUCH-UP
Understanding Cabinetry Item Numbers Wall and Tall Cabinets Example: Wall Cabinet W1242 The wall cabinet width is always listed first and height is always the last two numbers. Thus 12 is the width and 42 is the height. Since most wall cabinets are 12" deep we only list the cabinet depth when it is not 12" as in the following example. Example: Wall Cabinet W 362415 The depth of the cabinet is 24" and note this number follows the width (36) and precedes the height (15). When the depth is not 12" it will always be the middle two numbers. There is one other exception to the rule and that involves wall blind corner cabinetry. With blind corner cabinetry, the cabinet can be pulled up to 2 7 8" from the corner. Example: Cabinet Width Cabinet Width Wall Blind Corner Cabinet WBC 42/4530 Cabinet Height Cabinet Height Cabinet Depth Cabinet Height Minimum/Maximum Cabinet Width Base Cabinets Base cabinets are simpler than wall cabinets because the height (34 1 2" plus 1 1 2" for the countertop) and the depth (24") are always the same unless otherwise noted. Thus the only numbers you need to know are the width. Example: Base Cabinet B 24 The 24 represents the width. Just like the wall cabinets, we do on occasion use a letter after the two digit number to further describe the base cabinet: L (Left Hinging/Left Hand Blind/Left Hand Drawer Stack Position), R (Right Hinging/Right Hand Blind/Right Hand Drawer Stack Position). B (Butt Doors). FDS (Full-Depth Shelf) and HDS (Half-Depth Shelf). Bath Cabinets Bath cabinets are similar to base cabinets. The numbers are used to represent the width. Bath cabinets are always 31 1 2" high plus 1 1 2" for the countertop unless otherwise noted. Example: Vanity Base Top Drawer VBTD 36 Cabinet Width Cabinet Width The letters we use at the end on select bath cabinets are: L (Left Hinging), R (Right Hinging), S (Single Door) and B (Butt Doors). 42 is the width, /45 is the 42" width plus the 3" maximum (2 7 8" actual) for pulling the cabinet and 30 is the height. On occasion, a letter will follow the wall or tall cabinet numbers. The only time we use a letter at the end of the item number is for clarification purposes. The letters we use at the end on select wall or tall cabinets are: L (Left Hinging), R (Right Hinging) and B (Butt Doors). Note: In keeping with our policy of continuous product refinement, Masco Builder Cabinet Group reserves the right to change specifications in design and materials as conditions require, or as improvements develop without notice. 2 Understanding Cabinetry Item Numbers Merillat Essentials Product Specifications for Cabinetry and Accessories
Computer Design Software Twenty-Twenty Notes Version 8.0 and later: To locate any item within the current catalog, go to the Drop and Drag list. Begin to type the code of the item you are looking for in the Quick Search area. Type one or more letters to list corresponding items in the Drag and Drop list. The more characters you enter, the narrower the selections become. For example, if you type B30, you will get the 30-inch base cabinets. If you type B30H, you narrow the list even more. When you have found the item you are looking for, place it into your design. Proper spacing is important when entering codes to locate items. For example, if you type B30, 20-20 will locate a 30-inch base cabinet. If you type B 30, with a space, 20-20 will not locate the cabinet. Merillat Essentials Product Specifications for Cabinetry and Accessories Computer Design Software 3
Door Styles Full Overlay/Traditional Overlay Laminate with Integral Finger Pull Full Overlay Laminate Base Wall Flat panel doors and drawer fronts combine a scratchresistant melamine laminate surface with an Oak grained melamine trim. The bottom edges of wall doors and top edges of base doors and drawer fronts have a 15 reverse bevel. Decorative hardware is optional. Doors feature concealed nickel-finished self-closing hinges. 24" high wall cabinets have an actual height of 23 1 /2". Cabinet interior color is natural maple. Northport Medium Medium Oak grained melamine laminate door with matching Oak grained melamine laminate trim. Matching Oak finished cabinet front frame. Northport White White melamine laminate door with a light Oak grained melamine laminate trim. Natural Oak finished cabinet front frame. Unless otherwise specified, Northport White will come with Natural Oak accessories. Northport Natural Natural Oak grained melamine laminate door with matching Oak grained melamine laminate trim. Matching Natural Oak finished cabinet front frame. Base Wall Melamine laminated flat panel doors and drawer fronts have a 90 return with no reverse bevel, requiring decorative hardware. Doors feature concealed nickel-finished self-closing hinges. 24" high wall cabinets have an actual height of 23 1 /2". Cabinet interior color is white. Rutland II White melamine laminate door with white painted maple cabinet front frame. Top view wall and base Top view wall and base Base side view Wall side view Profile on top or bottom edges Base side view Wall side view Profile on all edges 4 Door Styles Merillat Essentials Product Specifications for Cabinetry and Accessories
Door Styles Traditional Overlay Raised Panel Traditional Overlay Recessed Panel Base Wall Heavy gauge vinyl laminated thermo-pressure formed MDF (Medium Density Fiberboard) raised panel doors and drawer fronts have a 90 return with integrated finger pull. Decorative hardware is optional. Doors feature concealed nickel-finished self-closing hinges. 24" high wall cabinets have an actual height of 23 1 /2". Cabinet interior color is white. Mountain Mist White 14 mil vinyl laminate door with white painted maple cabinet front frame. Base Wall Oak doors feature square veneer recessed panels and concealed nickel-finished self-closing hinges. Drawer fronts are solid wood. The top and bottom edges of doors and drawer fronts have a 15 reverse bevel. Decorative hardware is optional. 24" high wall cabinets have an actual height of 23 1 /2". Cabinet interior color is natural maple. Milbridge II Cider and Medium Oak doors with matching Oak finished cabinet front frame. Cider Finish: light yellow - brown oak Medium Finish: medium oak Top view wall and base Top view wall and base Base side view Wall side view Profile on top & bottom edges Base side view Wall side view Profile on top & bottom edges Merillat Essentials Product Specifications for Cabinetry and Accessories Door Styles 5
Door Styles Traditional Overlay Raised Panel Traditional Overlay Frame and Recessed Panel Base Wall Oak doors feature square veneer raised panels and concealed nickel-finished self-closing hinges. Drawer fronts are solid wood. The top and bottom edges of doors and drawer fronts have a 15 reverse bevel. Decorative hardware is optional. 24" high wall cabinets have an actual height of 23 1 /2". Cabinet interior color is natural maple. Pemberton II Cider and Medium Oak doors with matching Oak finished cabinet front frame. Cider Finish: light yellow - brown oak Medium Finish: medium oak Base Wall Sundale Maple doors feature frame and flat panel construction with concealed nickel-finished self-closing hinges mounted on a framed cabinet. Drawer fronts are solid maple. The top and bottom edges of doors and drawer fronts have a 15 reverse bevel. Decorative hardware is optional. 24" high wall cabinets have an actual height of 23 1 /2". Cabinet interior color is natural maple. Sundale Toffee and Paprika Maple doors with matching Maple finished cabinet front frame. Toffee Finish: warm brown Paprika Finish: a medium red cherry-like finish Top view wall and base Top view wall and base Base side view Wall side view Profile on top & bottom edges Base side view Wall side view Profile on top & bottom edges 6 Door Styles Merillat Essentials Product Specifications for Cabinetry and Accessories
Toespace Dimensional Details Toespace detail for base, tall and bath cabinets. TKC-LAM) See page 50. UATKC-LAM) See page 29. Merillat Essentials Product Specifications for Cabinetry and Accessories Toespace Dimensional Details 7
WALL CABINETS Single Door Wall Cabinets 12" deep (excluding doors) unless otherwise noted Double Door 42" high cabinet shown page 3. 42" and 36" high have three adjustable shelves 30" high have two adjustable shelves 24" high have one adjustable shelf 18" high have no shelf Invertible for L or R hinging, except Northport Specify L or R hinging for Northport Actual 24" cabinet height is 23 1 2" 42" high cabinet shown pages 3-5. 42" and 36" high have three adjustable shelves 30" high have two adjustable shelves 24" high have one adjustable shelf 21", 18", 15" and 12" high have no shelves W 2742, W 2736, W 2730, W 2724 and W 2718 not available in Sundale W 2742 B, W 2736 B, W 2730 B, W 2724 B and W 2718 B cabinets have butt doors without frame center stile. Only available in Sundale Actual 24" cabinet height is 23 1 2" Actual 21" cabinet height is 20 1 2" Note: Installation of a wall cabinet, by itself, is not recommended unless additional support is provided such as attachment to a soffit. See Merillat Framed Cabinet Installation Guide for specific instructions. Double Door 42" High W 2742 W 2742 B W 3042 W 3342 W 3642 21" High (20 1 2") W 3021 W 3321 W 3621 W 3921 W 4221 Single Door 42" High W 942 W 1242 W 1542 W 1842 W 2142 W 2442 36" High W 936 W 1236 W 1536 W 1836 W 2136 W 2436 30" High W 930 W 1230 W 1530 W 1830 W 2130 W 2430 24" High (23 1 2") W 1824 W 2424 18" High W 2418 36" High W 2736 W 2736 B W 3036 W 3336 W 3636 30" High W 2730 W 2730 B W 3030 W 3330 W 3630 W 3930 W 4230 W 4530 W 4830 24" High (23 1 2") W 2724 W 2724 B W 3024 W 3324 W 3624 W 3924 W 4224 W 4824 18" High W 2718 W 2718 B W 3018 W 3318 W 3618 W 3918 W 4218 W 4818 15" High W 3015 W 3315 W 3615 W 3915 W 4215 W 4515 W 4815 12" High W 3012 W 3312 W 3612 W 3912 W 4212 W 4512 W 4812 8 Wall Cabinets Merillat Essentials Product Specifications for Cabinetry and Accessories
24" Deep Double Door Wall Cabinets 12" deep (excluding doors) unless otherwise noted Blind Corner Single Door WALL CABINETS page 5. Available in 15" high only Designed for use over refrigerators where there is adequate clearance No shelf Note: Additional support is required. See installation sheet provided with cabinet or the Merillat Framed Cabinet Installation Guide 42" high cabinet shown. Illustrations are right blind. See Wall Blind Corner Details on page 54. page 5. 42" and 36" high have three adjustable shelves 30" high have two adjustable shelves Door hinged from face frame center stile 3" filler included, shipped unattached Invertible for L or R blind corner, except Northport Specify L or R blind corner for Northport (end of cabinet hidden by end of adjoining cabinet) Do not pull cabinet more than 2 7 /8" from corner (A) (B) WBC 24/27 24" 26 7 /8" WBC 27/30 27" 29 7 /8" WBC 30/33 30" 32 7 /8" WBC 33/36 33" 35 7 /8" WBC 36/39 36" 38 7 /8" 24" Deep Double Door 15" High W 302415 W 332415 W 362415 W 392415 Blind Corner Single Door 42" High WBC 24/2742 WBC 27/3042 WBC 30/3342 WBC 36/3942 36" High WBC 24/2736 WBC 27/3036 WBC 30/3336 WBC 36/3936 30" High WBC 24/2730 WBC 27/3030 WBC 30/3330 WBC 33/3630 WBC 36/3930 Merillat Essentials Product Specifications for Cabinetry and Accessories Wall Cabinets 9
WALL CABINETS Blind Corner Double Door Wall Cabinets 12" deep (excluding doors) unless otherwise noted 45 Corner Single Door Illustrations are right blind. See Wall Blind Corner Details on page 54. page 6. Available in 30" high only Two adjustable shelves 3" filler included, shipped unattached Invertible for L or R blind corner, except for Northport Specify L or R blind corner for Northport (end of cabinet hidden by end of adjoining cabinet) Do not pull cabinet more than 2 7 8" from corner Two different width doors, the narrower is located next to the blind opening 42" high cabinet shown page 6. Requires 24" of wall space in both directions 42" and 36" high have three adjustable shelves 30" high have two adjustable shelves Invertible for L or R hinging, except for Northport Specify L or R hinging for Northport Northport and Rutland II doors are similar in width to traditional overlay doors in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame. Adjacent cabinets can be installed directly against WC without fillers Back corner removed for easier installation 17" Blind Corner Double Door 30" High WBC 42/4530 WBC 48/5130 45 Corner Single Door 42" High WC 2442 36" High WC 2436 30" High WC 2430 10 Wall Cabinets Merillat Essentials Product Specifications for Cabinetry and Accessories
Filler Wall Wall Cabinet Accessories Wall End Panel WALL CABINET ACCESSORIES 1" 2" 3" 6" page 7. Item Width Length Qty. F 1 1" 30" 20 or 1 F 2 2" 30" 10 or 1 F 3 3" 30" 4 or 1 F 3-36 3" 36" 1 F 3-42 3" 42" 4 or 1 F 6 6" 30" 1 F 6-36 6" 36" 1 F 6-42 6" 42" 1 3 4" thick solid Maple or Oak Available in White, and all finishes in Oak and Maple White filler is painted Maple Used to fill spaces between cabinet and wall, or to provide clearance for doors and drawers in corner applications Edge may be cut (scribed) to fit wall Backside not finished page 7. Grain Direction Available in White, and all finishes in Oak and Maple Used to trim or flush-out laminate exposed end of wall cabinet For L- or R-hand use 3 16" thick plywood panel Finished on one side only 11 1 4" wide x 30" or 42" high (long) Oak and Maple finished WEPs are veneered plywood. Grain direction runs lengthwise White WEPs have easy clean laminate finish for use with Mountain Mist and Rutland II Unless otherwise specified, Northport White will be shipped in Oak Natural (OKNA) Offered individually or six per carton Filler Wall Corner page 7. 3 4" thick solid Maple or Oak Available in White, and all finishes in Oak and Maple White filler is painted Maple Used to provide clearance between cabinets when corner space is not used 3" wide on each face, 30" or 42" tall Backside not finished One per carton Filler Wall F 1 F 1/20 F 2 F 2/10 F 3 F 3/4 F 3-36 F 3-42 F 3-42/4 F 6 F 6-36 F 6-42 Filler Wall Corner FWC 3-30 FWC 3-42 Wall End Panel WEP 30 WEP 30/6 WEP 42 WEP 42/6 Merillat Essentials Product Specifications for Cabinetry and Accessories Wall Cabinet Accessories 11
WALL CABINET ACCESSORIES Appliance Garage Diagonal Wall Cabinet Accessories Appliance Garage Straight page 7. Available in White, and all finishes in Oak and Maple Provides countertop out-of-sight storage for toaster, mixer and other small appliances Fits under WC wall cabinets 18 1 4" high. Bottom edges may be trimmed a maximum of 1" before interfering with tambour track stop End panels are 1 2" thick engineered wood with moisture- and stain-resistant, easy clean laminate exterior and interior surfaces End panels have matching exterior surface. The interior surface is Maple Natural except for White garages which have a White surface. End panels shipped unattached Includes one antique brass knob Designed to set back 1 4" from wall cabinet frame for easier installation Features a torsion spring activated roll-up tambour door No back design allows easy access to electrical outlets and notching for backsplash Includes installation hardware One per carton Available in White, and all finishes in Oak and Maple Provides countertop out-of-sight storage for toaster, mixer and other small appliances Fits under 18", 24", 30" and 36" wide wall cabinets page 7. 18 1 4" high. Bottom edges may be trimmed a maximum of 1" before interfering with tambour track stop. End panels are 1 2" thick engineered wood with moisture- and stain-resistant, easy clean laminate exterior and interior surfaces End panels have matching exterior surface. The interior surface is Maple Natural except for White garages which have a White surface. End panels shipped unattached Features a torsion spring activated roll-up tambour door No back design allows easy access to electrical outlets and notching for backsplash Cannot be cut down in width AGS 18 and AGS 24 include one antique brass knob. AGS 30 and AGS 36 include two knobs Designed to set back 1 4" from wall cabinet frame for easier installation Includes installation hardware One per carton Appliance Garage Diagonal AGD 24 Appliance Garage Straight AGS 18 AGS 24 AGS 30 AGS 36 12 Wall Cabinet Accessories Merillat Essentials Product Specifications for Cabinetry and Accessories
Pigeon Hole Organizer Wall Cabinet Accessories Under Cabinet Shelf Corner WALL CABINET ACCESSORIES PHO 30 shown page 7. Available in White, and all finishes in Oak and Maple For Sundale Paprika, use Cherry Paprika (CHPK) PHO 30 has 5 equal compartments, PHO 36 has 6 equal compartments (5 1 4" x 5 1 4") Matching wood veneer interior and exterior surfaces White is painted Maple Units may be stacked horizontally or mounted vertically Includes a matching wood strip at each end to align with wall cabinet frame above when installed horizontally. Use a WEP on exposed sides to cover end panel joints One per carton Under Cabinet Shelf page 7. Available in White (painted Maple), and all finishes in Oak and Maple For use under standard 36" wide wall cabinets 4 3 4" deep shelf with groove for displaying plates up to 6 1 8" diameter Back and top panels included in unit for strength and ease of installation with matching moisture- and stain-resistant easy clean laminate exposed surfaces Solid Maple and Oak ends and wood veneered shelf Shipped assembled Ends can be removed so that the assembly can be cut down in 3" increments to only 12" wide for use under narrower cabinet applications One per carton Pigeon Hole Organizer PHO 30 PHO 36 Under Cabinet Shelf UCS 36 page 7. Available in White (painted Maple), and all finishes in Oak and Maple Fits under WC wall cabinets Extends 24" from corner in both directions 4 3 4" deep shelves with groove for displaying plates up to 6 1 8" diameter Back and top panels included in unit for strength and ease of installation with matching moisture- and stain-resistant easy clean laminate exposed surfaces Solid Maple and Oak ends and wood veneered shelves Shipped assembled One per carton Wall Whatnot Shelf Available in White, and all finishes in Oak and Maple 5 8" thick solid Maple and Oak fixed shelves and top White shelves and top are painted Maple WN630 shown page 7. 30" high has 3 fixed shelves and top with 3 equal spaces 9 5 /8" high 36" high has 4 fixed shelves and top with 4 equal spaces 8 3 16" high 42" high has 4 fixed shelves and top with 4 equal spaces 9 11 16" high Invertible for use at the L or R end of cabinet run End and back panels are 3 16" thick veneered plywood finished on exposed surfaces Back panels have vertical wood grain (except for White) Backsides are unfinished WN shelves and top extend flush with adjacent cabinet face frame WN's are 6 3 16" wide x 12" deep x 30", 36" and 42" high with a 5 3 4" long, 45 angle cut front corner on shelves and top Trimmable to 5 7 8" wide One per carton Under Cabinet Shelf Corner UCSC 24 Wall Whatnot Shelf WN630 WN636 WN642 Merillat Essentials Product Specifications for Cabinetry and Accessories Wall Cabinet Accessories 13
WALL CABINET ACCESSORIES Valance Wall Cabinet Accessories Valance Frieze page 8. 90 3/4" End view of Maple and Oak Valance Scalloped page 8. Valance V4 V8 Available in White, and all finishes in Oak and Maple White is painted Maple 4 1 4" high x 3 4" thick solid wood 48" or 96" long For use between wall cabinets over windows as a panel to conceal light fixtures Can be used in Universal Access kitchens as an apron to hide sink bowls and cooktops while still accommodating a wheelchair Oak and Maple finished valances are profiled on one long edge and is not the same as doors and drawer fronts. Profile compliments but does not match Milbridge II and Pemberton II doors and drawer fronts. White valances have no profile for a more contemporary look Finished both sides and both long edges Backside not intended to be viewed One per carton Available in White, and all finishes in Oak and Maple White is painted Maple 4 1 4" high x 3 4" thick solid wood 48" or 96" long Used between wall cabinets over windows as a panel to conceal light fixtures Scalloped design on one long edge repeats on 12" centers and is accented with a full-length decorative beaded profile Finished both sides and both long edges Backside not intended to be viewed 6" of trimmable straight length on both ends One per carton Valance Scalloped V4S V8S (3 patterns shown) page 8. Available in White, and all finishes in Oak and Maple 5" high x 3 4" thick solid wood with frieze pattern White is painted Maple European country style valance can be used over sink area or combined with shelves or shelving system to create accent areas Backside not intended to be viewed One per carton Trim Table Amount Length in trimmable Trimmed Inches # of patterns from each end Length VFR 18 1 pattern 4" 10" VFR 24 1 pattern 7" 10" VFR 30 2 patterns 6 1 4" 17 1 2" VFR 36 3 patterns 5 1 2" 25" VFR 42 3 patterns 8 1 2" 25" VFR 48 4 patterns 7 3 4" 32 1 2" VFR 60 5 patterns 10" 40" VFR 72 6 patterns 12 1 4" 47 1 2" VFR 84 7 patterns 14 1 2" 55" Please note: Amount trimmable from each end is within approximately 1 2" of pattern. Valance Frieze VFR 18 VFR 24 VFR 30 VFR 36 VFR 42 VFR 48 VFR 60 VFR 72 VFR 84 14 Wall Cabinet Accessories Merillat Essentials Product Specifications for Cabinetry and Accessories
Base Cabinets 24" deep, 34 1 2" high (excluding doors and drawers) unless otherwise noted Sink Base Single Door Sink Front Straight Single Door page 9. One door Specify L or R hinging One full-width drawer front above door No shelf Back panel is pre-drilled for optional bottom and mid-height roll-out trays page 9. One door Specify L or R hinging One full-width drawer front above door Toekick backer assembly included, shipped unattached Bottom panel not supplied, order separately. See SFB 24/36 BASE CABINETS Sink Base Double Door Sink Front Straight Double Door page 9. Two doors SB 27 not available in Sundale SB 27 B cabinet has butt doors without frame center stile. Only available in Sundale SB 27 - SB 39 have one fullwidth drawer front above doors including SB 27 B SB 42 and SB 48 have two drawer fronts, one above each door No shelf Back panel is pre-drilled for optional bottom and mid-height roll-out trays page 9. Two doors One full-width drawer front above doors Toekick backer assembly included, shipped unattached Bottom panel not supplied, order separately. See SFB 24/36 Sink Base Single Door SB 12 L or R SB 15 L or R SB 18 L or R SB 21 L or R SB 24 L or R Sink Base Double Door SB 27 SB 27 B SB 30 SB 33 SB 36 SB 39 SB 42 SB 48 Sink Front Straight Single Door SF 24 L or R Sink Front Straight Double Door SF 30 SF 36 Merillat Product Specifications for Cabinetry and Accessories Base Cabinets 15
Base Cabinets 24" deep, 34 1 2" high (excluding doors and drawers) unless otherwise noted Sink Front Diagonal Sink Base Full Height Single Door BASE CABINETS One door Specify L or R hinging One drawer front above door Northport and Rutland II sink front doors and drawer fronts are similar in width to traditional overlay sink fronts in order to avoid interference with adjacent cabinet doors. This exposes more of the sink front face frame. Toekick backer assembly included, shipped unattached Bottom panel not supplied, order separately. See SFDB 36/42 page 10. One full-height door Specify L or R hinging No shelf Back panel is pre-drilled for optional bottom and mid-height roll-out trays page 9. Sink Front Diagonal Full Height Door page 10. One full height door Invertible for L or R hinging, except for Northport Specify L or R hinging for Northport Northport and Rutland II sink front doors are similar in width to traditional overlay sink fronts in order to avoid interference with adjacent cabinet doors. This exposes more of the sink front face frame. Toekick backer assembly included, shipped unattached Bottom panel not supplied, order separately. See SFDB 36/39 Sink Front Diagonal SFD 36 L or R SFD 39 L or R SFD 42 L or R Sink Front Diagonal Full Height Door SFDFH 36 Sink Base Full Height Double Door page 10. Two full-height doors SBFH 27 not available in Sundale SBFH 27 B cabinet has butt doors without frame center stile. Only available in Sundale No shelf Back panel is pre-drilled for optional bottom and mid-height roll-out trays Sink Base Full Height Single Door SBFH 24 L or R Sink Base Full Height Double Door SBFH 27 SBFH 27 B SBFH 30 SBFH 33 SBFH 36 SBFH 39 SBFH 42 SBFH 48 16 Base Cabinets Merillat Product Specifications for Cabinetry and Accessories
Base Cabinets 24" deep, 34 1 2" high (excluding doors and drawers) unless otherwise noted Sink Front Straight Full Height Single Door page 10. One full-height door Invertible for L or R hinging, except for Northport Specify L or R hinging for Northport Toekick backer assembly included, shipped unattached Bottom panel not supplied, order separately. See SFB 24/36 Single Door Half Depth Shelf page 11. One door Specify L or R hinging One standard height top drawer One mid-height position halfdepth adjustable shelf Back panel is pre-drilled for optional bottom roll-out tray BASE CABINETS Sink Front Straight Full Height Double Door Two full-height doors Toekick backer assembly included, shipped unattached Bottom panel not supplied, order separately. See SFB 24/36 Full Height Door One full-height door Specify L or R hinging No shelf Roll-out tray not available page 10. page 11. Sink Front Straight Full Height Single Door SFFH 24 Sink Front Straight Full Height Double Door SFFH 30 SFFH 36 Single Door Half Depth Shelf B 12 L or R HDS B 15 L or R HDS B 18 L or R HDS B 21 L or R HDS B 24 L or R HDS Full Height Door B 9 L or R (no shelf) Merillat Product Specifications for Cabinetry and Accessories Base Cabinets 17
Base Cabinets 24" deep, 34 1 2" high (excluding doors and drawers) unless otherwise noted Single Door Full Height Half Depth Shelf Three Door Half Depth Shelf BASE CABINETS page 11. One full-height door Specify L or R hinging One mid-height position halfdepth adjustable shelf Back panel is pre-drilled for optional bottom roll-out tray page 11. Three equal size doors, center door hinged R Three equal size standard height top drawers One mid-height position halfdepth adjustable shelf Back panel is pre-drilled for optional bottom roll-out trays for each door opening 3 3 16" wide full-width support crossrail across top front of cabinet Double Door Half Depth Shelf Double Door Full Height Half Depth Shelf page 11. Single Door Full Height Half Depth Shelf BFH 12 L or R HDS BFH 15 L or R HDS BFH 18 L or R HDS BFH 21 L or R HDS BFH 24 L or R HDS Two doors B 27 HDS not available in Sundale B 27 B HDS cabinet has butt doors without frame center stile. Only available in Sundale One full-width standard height top drawer, except B 42, B 45 and B 48 cabinets which have two drawers, one above each door One mid-height position halfdepth adjustable shelf Back panel is pre-drilled for optional bottom roll-out trays Double Door Half Depth Shelf B 27 HDS B 27 B HDS B 30 HDS B 33 HDS B 36 HDS B 39 HDS B 42 HDS B 45 HDS B 48 HDS page 12. Two full height doors One mid-height position half-depth adjustable shelf BFH 27 HDS not available in Sundale BFH 27 B HDS cabinet has butt doors without frame center stile. Only available in Sundale Back panel is pre-drilled for optional bottom roll-out trays Three Door Half Depth Shelf B 54 HDS Double Door Full Height Half Depth Shelf BFH 27 HDS BFH 27 B HDS BFH 30 HDS BFH 33 HDS BFH 36 HDS BFH 39 HDS BFH 42 HDS BFH 45 HDS BFH 48 HDS 18 Base Cabinets Merillat Product Specifications for Cabinetry and Accessories
Base Cabinets 24" deep, 34 1 2" high (excluding doors and drawers) unless otherwise noted Three Drawer page 12. One standard height full-width drawer on top Two deep full-width drawers on bottom with 6 7 8" high sides All drawers have standard threequarter extension slides Base Four Drawer Combination Full Depth Shelf Illustration is L-hand drawer position page 12. One door One standard height full-width drawer across top of cabinet Two standard height half-width drawers One half-width deep drawer on bottom with 6 7 8" high sides Specify L or R position for drawers All drawers have standard three-quarter extension slides One mid-height position fulldepth non-adjustable shelf behind door Back panel is pre-drilled for optional bottom roll-out tray behind door Note: Not available with a halfdepth adjustable shelf BASE CABINETS Four Drawer Three standard height full-width drawers on top One deep full-width drawer on bottom with 6 7 8" high sides All drawers have standard threequarter extension slides page 12. Three Drawer BD3 12 BD3 15 BD3 18 BD3 21 BD3 24 BD3 30 BD3 36 Four Drawer BD4 12 BD4 15 BD4 18 BD4 21 BD4 24 Base Four Drawer Combination Full Depth Shelf BD4C 24 L or R FDS BD4C 30 L or R FDS BD4C 36 L or R FDS Merillat Product Specifications for Cabinetry and Accessories Base Cabinets 19
BASE CABINETS Base Cabinets 24" deep, 34 1 2" high (excluding doors and drawers) unless otherwise noted Double Faced Single Door Base Blind Corner Half Depth Shelf Full Depth Shelf page 12. One standard height top drawer which opens on kitchen side Drawer front only on dining room side One mid-height position full-depth adjustable shelf Each side has one door hinged at same end of cabinet Door hinged left on kitchen side 24 7 32" deep (excluding doors and drawer fronts) Note: Not available with a half-depth adjustable shelf Illustrations are blind left. See Base Blind Corner Details on page 55. Specify L or R hand blind corner (end of cabinet hidden by end of adjoining cabinet) One standard height top drawer One door hinged from face frame center stile One adjustable half-depth fullwidth shelf 3" filler included, shipped unattached Do not pull cabinet more than 2 7 8" from corner Back panel is pre-drilled for optional bottom roll-out tray (A) (B) (C) BBC 36/39 36" / 38 7 /8" 24" BBC 39/42 39" / 41 7 /8" 30" BBC 42/45 42" / 44 7 /8" 36" BBC 45/48 45" / 47 7 /8" 42" BBC 48/51 48" / 50 7 /8" 48" Double Faced Double Door Full Depth Shelf One standard height full-width top drawer which opens on kitchen side One full-width drawer front only on dining room side One mid-height position fulldepth adjustable shelf Each side has two doors page 13. BDF 27 FDS not available in Sundale BDF 27 B FDS cabinet has butt doors without frame center stile on both sides. Only available in Sundale 24 7 32" deep (excluding doors and drawer fronts) Note: Not available with a half-depth adjustable shelf page 13. Double Faced Single Door Full Depth Shelf BDF 24 FDS Double Faced Double Door Full Depth Shelf BDF 27 FDS BDF 27 B FDS BDF 30 FDS BDF 36 FDS Base Blind Corner Half Depth Shelf BBC 36/39 L or R HDS BBC 39/42 L or R HDS BBC 42/45 L or R HDS BBC 45/48 L or R HDS BBC 48/51 L or R HDS 20 Base Cabinets Merillat Product Specifications for Cabinetry and Accessories
Base Cabinets 24" deep, 34 1 2" high (excluding doors and drawers) unless otherwise noted Base Corner Base Corner Revolving 6" Base Lazy Susan 6" 14 5 /8" 6" page 13. 14 5 /8" page 13. 6" Base Corner BC 36 L or R Requires 36" of wall space in both directions One 5 8" thick fixed pie-cut shelf centered in cabinet Bi-fold doors with independent adjustment. Specify L or R hinging Northport and Rutland II face frame stile is notched to accommodate hinges for full overlay. Door hinging cannot be inverted in field Northport, Rutland II and Mountain Mist have 168 opening hinges attaching door assembly to cabinet face frame Milbridge II, Sundale and Pemberton II have 105 opening hinges attaching door assembly to cabinet face frame Use EF 3-34 if end is exposed (requires 3" of space) Caution: If BC 36 cabinet is installed next to an appliance deeper than 25", it may interfere with cabinet door when opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front (pulling cabinet will result in a deeper countertop and overall base cabinet depth dimension). Not available in Northport or Rutland II Requires 36" of wall space in both directions Two 28" diameter pie-cut revolving shelves made of high impact white plastic Doors revolve with shelves. Shelves are not independent of each other Shelf load capacity rating of 15 lbs. per square foot, not to exceed 50 lbs. Use EF 3-34 if end is exposed (requires 3" of space) Base Lazy Susan BLS 36 6" 6" 14 5 /8" 14 5 /8" page 13. BCR 33 BCR 36 6" 6" BCR 36 requires 36" of wall space in both directions BCR 33 requires 33" of wall space in both directions Bi-fold doors with independent adjustment. Specify L or R hinging Northport and Rutland II face frame stile is notched to accommodate hinges for full overlay. Door hinging cannot be inverted in field Northport, Rutland II and Mountain Mist have 168 opening hinges attaching door assembly to cabinet face frame Milbridge II, Sundale and Pemberton II have 105 opening hinges attaching door assembly to cabinet face frame Two 28" diameter pie-cut revolving shelves made of high impact white plastic Shelves rotate independently of doors and each other Shelf load capacity rating of 15 lbs. per square foot, not to exceed 50 lbs. Use EF 3-34 if end is exposed (requires 3" of space) Caution: If BCR cabinet is installed next to an appliance deeper than 25", it may interfere with cabinet door when opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front (pulling cabinet will result in a deeper countertop and overall base cabinet depth dimension). Base Corner Revolving BCR 33 L or R BCR 36 L or R Door and Frame Assembly Sales Samples DFA SHOWROOM (DFA VBTD 12L) DFA B 15L page 13. BASE CABINETS Merillat Product Specifications for Cabinetry and Accessories Base Cabinets 21
Base Cabinets BASE CABINETS Apron Drawer 21" Deep x 4 1 2" High page 14. AD 24 and 30 not available in Sundale Designed for use between base, desk, bath or tall cabinets or with desk leg on one end 21" deep excluding drawer front Overall height of 4 1 2" Full-width top panel is recessed for easier installation Drawer front profiled on all four edges, except Northport Northport drawer front profiled on top edge only same as standard drawer fronts Face frame stiles on each end may be trimmed a maximum of 3 4" allowing the AD width to be reduced a maximum of 1 1 2", except Northport and Rutland II which cannot be trimmed Requires countertop/writing surface Apron Drawer 21" Deep x 4 1 2" High AD 24 AD 30 AD 36 Trimmable Knee Drawer 21" Deep x 5 3 16" High page 14. Desk Leg page 14. Designed for use between base, desk, bath or tall cabinets or with desk leg on one end 5 3 16" overall height 21" deep excluding drawer front 4 1 2" wide face frame stiles permits TKD to be trimmed up to 6" in overall width (3" each side): TKD 24 can be trimmed to 18" wide TKD 30 can be trimmed to 24" wide TKD 36 can be trimmed to 30" wide Face frame includes 11 16" tall bottom rail for added strength Full-width top panel is recessed for easier installation Drawer front profiled on all four edges except Northport Northport drawer front profiled on top edge only same as standard drawer fronts Requires countertop/writing surface Trimmable Knee Drawer 21" Deep x 5 3 16" High TKD 24 TKD 30 TKD 36 Desk Leg DL 24 5 3 /16 Available in White, and all Oak and Maple finishes Maple and Oak legs are engineered wood with veneer both sides and front edge White is engineered wood with moisture- and stain-resistant, easy clean solid white color laminate both sides and melamine edgebanding on front edge Used to support end of Apron Drawer (AD) or Trimmable Knee Drawer (TKD). Fits behind extended face frame stile. 31 1 2" high x 23 1 4" deep x 3 4" thick 5 3 8" high flat at front edge Finished on both sides and front edge Can be field cut to desk height and depth One per carton 22 Base Cabinets Merillat Product Specifications for Cabinetry and Accessories
Base Cabinet Accessories Filler Base End Filler Base page 15. 3 4" thick solid Maple or Oak filler Available in White, and all finishes in Oak and Maple White filler is painted Maple 3" or 6" wide x 34 1 2" tall including toespace (toekick backer) assembly For L or R installation Edge may be cut (scribed) to fit wall surface Toespace (toekick backer) assembly shipped unattached One per carton Plan View Front Edge page 15. Available in White, and all finishes in Oak and Maple Used on the end of cabinet run to conceal a dishwasher or end of a BLS/BC/BCR cabinet 34 1 2" tall x 24" deep with 3" wide x 3 4" thick solid Maple or Oak filler White filler is painted Maple 3 8" thick engineered wood panel with matching easy clean laminate exterior and Maple Natural easy clean laminate interior except White White End Fillers have a 3 8" thick engineered wood panel with White easy clean laminate exterior and interior Unless otherwise specified, Northport White will be shipped in Oak Natural (OKNA) Toespace notch must be field cut for L or R hand use Offered individually or two per carton BASE CABINET ACCESSORIES Filler Base Corner page 15. 3 4" thick solid Maple and Oak filler Available in White, and all finishes in Oak and Maple White filler is painted Maple Used to provide clearance between cabinets when corner space is not used 3" wide faces x 34 1 2" tall including toespace (toekick backer) assembly. Shipped completely assembled One per carton Filler Base FB 3 FB 6 Filler Base Corner FBC 3 End Filler Base EF 3-34 EF 3-34/2 Merillat Product Specifications for Cabinetry and Accessories Base Cabinet Accessories 23
Base Cabinet Accessories Base End Panel Panel Backer 3' Tall BASE CABINET ACCESSORIES page 15. Grain Direction Available in White, and all finishes in Oak and Maple Used to trim or flush-out laminate exposed end of base cabinet For L- or R-hand use 3 16" x 23 1 4" wide x 34 1 2" long plywood panel Finished on one side only Toespace must be field cut Oak and Maple finished BEPs are veneered plywood. Grain direction runs lengthwise White BEP has easy clean laminate finish for use with Northport White, Mountain Mist and Rutland II Offered individually or six per carton Grain Direction page 15. 48 34 1 /2 Available in White, and all finishes in Oak and Maple Used to cover exposed backs of base cabinets in peninsula or island configurations 3 16" thick x 48" wide x 34 1 2" tall Field trim to fit Finished one side only Oak and Maple finished panels (PB 3-VENEER) are veneered plywood. Grain direction runs vertically, parallel to 34 1 2" side White panel (PB 3-LAM) is 3 16" thick Medium Density Fiberboard (MDF) covered one side with a moisture- and stain-resistant, easy clean solid white color laminate Unless otherwise specified, Northport White will be shipped in Oak Natural (OKNA) Offered individually or four per carton Dishwasher Panel Panel Backer Veneer 8' x 4' page 15. Grain Direction Available in White, and all finishes in Oak and Maple Provides finished look to dishwasher Field trim to fit 23 3 4" wide x 26" high panel with vertical grain direction when applicable Finished on one side only Oak and Maple finished DWPs are 3 16" thick veneered plywood White DWP is 3 16" thick painted Maple veneered plywood for use with Northport White (when specified), Mountain Mist and Rutland II Unless otherwise specified, Northport White will be shipped in Oak Natural (OKNA) Offered individually or four per carton Base End Panel BEP 34 BEP 34/6 Dishwasher Panel DWP DWP/4 4 Grain Direction page 15. 8 Available in all Oak and Maple finishes Not available in White Used to cover exposed backs of base cabinets in peninsula or island configurations Field trim to fit 3 16" thick veneered plywood finished one side only 96" long x 48" wide Grain direction runs perpendicular to the length, parallel to 4' side Offered individually or two per carton Panel Backer 3' Tall PB 3-VENEER PB 3-VENEER/4 PB 3-LAM PB 3-LAM/4 Panel Backer Veneer 8' x 4' PB 9648-VENEER PB 9648-VENEER/2 24 Base Cabinet Accessories Merillat Product Specifications for Cabinetry and Accessories
Base Cabinet Accessories Panel Backer Veneer 4' x 8' Range Panel 8 4 Grain Direction page 15. Available in all Oak and Maple finishes Not available in White Used to cover exposed backs of base and tall cabinets in peninsula or island configurations Field trim to fit 3 16" thick veneered plywood finished one side only 48" wide x 96" long Grain direction runs lengthwise, parallel to 8' side Offered individually or two per carton page 15. Available in White, and all finishes in Oak and Maple Matching panel for use under drop-in range Panel has horizontal wood grain (except for White) Attaches to adjacent cabinets on both sides Field trim height as needed Toespace (toekick backer) assembly included, shipped unattached 10" high x 30" solid Maple and Oak panel White panel is painted Maple Matching toekick cover is required One per carton BASE CABINET ACCESSORIES Panel Backer Laminate 4' x 8' Base Waste Basket 8 4 Grain Direction page 15. Available in White, and all finishes in Oak and Maple For Sundale Paprika (MPPK), use Cherry Paprika (CHPK) Unless otherwise specified, Northport White will come as Natural Oak Used to cover exposed backs of base and tall cabinets in peninsula or island configurations Field trim to fit 3 16" thick Medium Density Fiberboard (MDF) covered one side with a moisture- and stain-resistant, easy clean laminate 48" wide x 96" long Grain direction runs lengthwise, parallel to 8' side Offered individually or two per carton page 16. White epoxy-coated wire frame and 30 quart white plastic bin Requires Base Tray Kit (BTK). Order separately. Fits base cabinets 15" and wider Unit can be mounted sideways, two deep in 21" wide base cabinets 9 1 2" x 15 1 2" x 18" high (including bin) Installation hardware included Offered as individual kit or six per carton Panel Backer Veneer 4' x 8' PB-VENEER PB-VENEER/2 Panel Backer Laminate 4' x 8' PB-LAM PB-LAM/2 Range Panel RP 30 Base Waste Basket BWB BWB/6 Merillat Product Specifications for Cabinetry and Accessories Base Cabinet Accessories 25
Base Cabinet Accessories Drawer Partition Kit Tilt-Out Sink Tray BASE CABINET ACCESSORIES page 16. For use in all drawers Kit contains two self-adhesive end brackets and one natural finished hardwood divider Brackets are clear plastic and include two holes for optional screw attachment to drawer (screws not included) Hardwood divider measures 1 2" thick x 3 1 8" tall x 20 1 2" long Field trim the divider to fit Installation instructions included Offered individually Removable high-impact white plastic tray installs on backside of sink base drawer front Allows drawer front to tilt down for convenient out-of-sight storage of TOST 12 small items, soap, scouring pads, etc. Integral finger ring holder on left end of each tray Partitioned bar soap storage on right end of each tray One pair of fully-concealed self-closing hinges included with each tray allowing drawer to front TOST 22 tilt down 51 degrees for easy tray access. Lifetime lubrication Hinge detent holds drawer front in page 16. open position Order decorative hardware separately Installation hardware and installation instructions included Towel Bar (White) page 16. White epoxy-coated wire Mounts to back of cabinet door Three 10" long towel bars 12 7 16" wide overall Designed to fit SB 33 cabinet or wider Installation instructions and hardware included Offered individually Drawer Partition Kit DPK Towel Bar (White) TB Heat Shield page 16. TOST 12 Two single piece molded trays. Each tray is 11" wide x 2" front-to-back x 3 7 32" high Fits sink base cabinets 30" and wider. One tray will fit SB 24 and SB 27 cabinets (second tray can be installed on backside of door as a fixed storage tray) Offered one pair or 20 pairs per carton TOST 22 One single piece molded tray which is 22" wide x 2 1 16" front-to-back x 3 9 32" high Cannot be cut down in length Fits sink base cabinets 27" through 39" wide only Offered one or 20 per carton 18 gauge steel shield with White epoxy-coating for use with Mountain Mist Used to shield edge of vinyl-laminated doors and fronts from adjacent oven heat Mounting instructions included Mounting screws included Offered one per carton Tilt-Out Sink Tray TOST 12 TOST 12/20 TOST 22 TOST 22/20 Heat Shield HSD (White) 26 Base Cabinet Accessories Merillat Product Specifications for Cabinetry and Accessories
Base Cabinet Accessories Base Tray Kit page 16. Base Tray Kit BTK 12 M/P/S BTK 15 M/P/S BTK 18 M/P/S BTK 21 M/P/S BTK 24 M/P/S BTK 27 M/P/S BTK 27 B SUN BTK 33 M/P/S BTK 39 M/P/S BTK 45 M/P/S Installs in bottom of base cabinets utilizing pre-drilled holes in cabinet back panel and some face frames Includes tray core box, left and right roller slides, and installation hardware Standard three-quarter extension slides Installs in 24" deep Utility Cabinets (UC), utilizing pre-drilled holes in end panels BTK 18 and BTK 24 include brackets and screws for supporting guides on UC end panels For double door base cabinets, order two kits Tray front made of solid hardwood. Tray sides, back and bottom panel made of engineered wood covered with a moisture- and stain-resistant, easy clean laminate. Top edges of sides and back finished with matching edgebanding Available in Maple Natural for all products except Mountain Mist and Rutland II Available in White for use in Mountain Mist and Rutland II One tray per kit Note: M/P/S for use in Milbridge II/ Pemberton II/Sundale. SUN for use in Sundale only BTK 12 BTK 15 BTK 18 BTK 21 BTK 24 BTK 27 BTK 33 BTK 36 BTK 36/39 BTK 39 BTK 45 Northport/Rutland II/Mountain Mist (Maple Natural or White) Tray Width: Item: Across Front For use in: BTK 12 8 3 4" B 12 HDS, BFH 12 HDS, SB 12, BD4C 24 FDS BTK 15 11 3 4" B 15 HDS, BFH 15 HDS, SB 15, B 30 HDS, BD4C 30 FDS, BFH 30 HDS, SB 30, SBFH 30 BTK 18 14 3 4" B 18 HDS, BFH 18 HDS, SB 18, B 36 HDS, BD4C 36 FDS, BFH 36 HDS, SB 36, SBFH 36, B 54 HDS, UC 182484, UC 182490, UC 182496 BTK 21 17 3 4" B 21 HDS, BFH 21 HDS, SB 21, B 42 HDS, BFH 42 HDS, SB 42, SBFH 42 BTK 24 20 3 4" B 24 HDS, BFH 24 HDS, SB 24, SBFH 24, B 48 HDS, BFH 48 HDS, SB 48, SBFH 48, UC 242484, UC 242490, UC 242496 BTK 27 10 1 4" B 27 HDS, BFH 27 HDS, SB 27, SBFH 27, BBC 39/42 HDS BTK 33 13 1 4" B 33 HDS, BFH 33 HDS, SB 33, SBFH 33, BBC 42/45 HDS BTK 36 32 3 4" Custom Applications BTK 36/39 7 1 4" BBC 36/39 HDS BTK 39 16 1 4" B 39 HDS, BFH 39 HDS, SB 39, SBFH 39, BBC 45/48 HDS BTK 45 19 1 4" B 45 HDS, BFH 45 HDS, BBC 48/51 HDS Milbridge II/Pemberton II/Sundale (Maple Natural) Tray Width: Item: Across Front For use in: BTK 12 M/P/S 8" B 12 HDS, BFH 12 HDS, SB 12, BD4C 24 FDS BTK 15 M/P/S 11" B 15 HDS, BFH 15 HDS, SB 15, B 30 HDS, BD4C 30 FDS, BFH 30 HDS, SB 30, SBFH 30 BTK 18 M/P/S 14" B 18 HDS, BFH 18 HDS, SB 18, B 36 HDS, BD4C 36 FDS, BFH 36 HDS, B 54 HDS, SB 36, SBFH 36, UC 182484, UC 182490, UC 182496 BTK 21 M/P/S 17" B 21 HDS, BFH 21 HDS, SB 21, B 42 HDS, BFH 42 HDS, SB 42, SBFH 42 BTK 24 M/P/S 20" B 24 HDS, BFH 24 HDS, SB 24, SBFH 24, B 48 HDS, BFH 48 HDS, SB 48, SBFH 48, UC 242484, UC 242490, UC 242496 BTK 27 M/P/S 9 1 2" *B 27 HDS, *BFH 27 HDS, *SB 27, *SBFH 27, BBC 39/42 HDS BTK 27 B SUN 23" **B 27 B HDS, **BFH 27 B HDS, **SB 27 B BTK 33 M/P/S 12 1 2" B 33 HDS, BFH 33 HDS, SB 33, SBFH 33, BBC 42/45 HDS BTK 39 M/P/S 15 1 2" B 39 HDS, BFH 39 HDS, SB 39, SBFH 39, BBC 45/48 HDS BTK 45 M/P/S 18 1 2" B 45 HDS, BFH 45 HDS, BBC 48/51 HDS * Milbridge II and Pemberton II only ** Sundale only BASE CABINET ACCESSORIES Merillat Product Specifications for Cabinetry and Accessories Base Cabinet Accessories 27
Base Cabinet Accessories Sink Front Bottom BASE CABINET ACCESSORIES page 16. Use as an optional cabinet bottom with SF 24, SFFH 24, SF 30, SFFH 30, SF 36, SFFH 36 and VSF 24 straight Sink Fronts Fits SF 36 and SFFH 36 without trimming. Field trim to length for SF 24, SFFH 24, SF 30, SFFH 30 and VSF 24 36 7 16" long x 23 3 16" wide x 3 8" thick Engineered wood panel with White or Maple Natural moisture- and stain-resistant, easy clean laminate on exposed topside. Unfinished underside Maple Natural woodgrain direction runs lengthwise Installation screws included One per carton Sink Front Diagonal Bottom page 16. Use as optional cabinet bottom with SFD 36, SFDFH 36, SFD 39 and SFD 42 diagonal Sink Fronts Fits SFD 42 without trimming. Field trim to length for SFD 36, SFDFH 36 and SFD 39 42 3 16" x 42 3 16" x 3 8" thick Engineered wood panel with White or Maple Natural moistureand stain-resistant, easy clean laminate on exposed topside. Unfinished underside Installation screws included One per carton Sink Front Bottom SFB 24/36 Sink Front Diagonal Bottom SFDB 36/42 28 Base Cabinet Accessories Merillat Product Specifications for Cabinetry and Accessories