Extract of 82 pages NX9 Manual Drafting
Drafting K Table of contents 1 K - Drafting K1 Start Drafting K1-1 Create Drawing K1-3 Drawing Navigator K1-4 Drafting Ribbon Bar K2 Drawing Sheet K3 Views K3-1 Drafting Preferences K3-3 Base View K3-5 View Parameters for Assemblies K3-6 Projected View K3-7 Detail View K3-9 View Break K3-11 Drawing View K3-12 Exploded View K3-13 Hole Table K3-14 Parts List K3-17 Image K4 Sections K4-1 Section View K4-5 Assembly Section K4-8 Half Section K4-9 Revolved Section K4-10 Folded Section View K4-11 Unfolded Section View K4-13 Break out Section View K5 Edit Views K5-1 Move/Copy Views K5-2 Align Views K5-3 View Boundary K5-4 Modfy 3D-Objects in View K5-5 Sketch in Drawing Version 2-1-
Drafting K Table of contents 2 K - Drafting K6 Detailing K6-1 Centerlines K6-4 Balloons K6-5 Symbols (Crosshatch and others) K6-6 Weld Symbol K6-7 Surface Symbol K6-8 User Defined Symbol K7 Dimension K7-1 Rapid Dimension K7-3 Dimension Settings K7-4 Parameter Blocs K7-6 Cylindrical Dimensions K7-7 Angular Dimension K7-8 Baseline dimension K7-10 Ordinate Dimension K7-12 Automatic and manual Dimension K8 Annotations K8-1 Create Note K8-4 Feature Control Symbols K8-6 Datum Feature Symbol K9 Track Changes Index Version 2-2-
Drafting K1 Ribbon bar 4 Drafting Ribbon bar: Group Home will provide access for most important commands: views, sections, details detailing sketch, bill of material, tables Create new drawing sheet usual If you use no template you'll be ask for the units and the projection rule. American (3rd angle projection) European (1st angle projection) Depending from the template you will be ask for title block input. Version 2-6-
Drafting K3 Views Overview K3-1 Drafting Preferences K3-3 Base View K3-5 View parameter for assemblies K3-6 Projected View K3-7 Detail Views K3-9 View Break K3-11 2D View K3-12 Exploded View K3-13 Hole Table K3-14 Parts List K3-17 Image Version 2-8-
Drafting K3 Views 3 Home Group View Base View alternative: Menu Insert View Base By this command the first view of referenced 3D-part is determined and positioned. Each additional view will be projected from this base view. Depending on the user s standard preferences this function can also take place automatically after invoking the first sheet. Positioning method view type orient the 3D-Model On: view will never change Version 2-11-
Drafting K4 Sections Overview K4-1 Section View K4-5 Assembly Section K4-8 Half Section K4-9 Revolved Section K4-10 Folded Section View K4-11 Unfolded Section View K4-13 Break-out Section View Version 2-26-
Drafting K4 Sections 2 Section View Example: stepped section 1. Parent view 2. first position to section optionally: MB3 Lock Alignment P3 3. Select: Add segment: 4. Further through points P2, P3 P2 Before positioning you can adjust the section line with following functions: P1 5. Confirm (MB2) 6. Position of the section view Display of the section view: + select section view Version 2-28-
Drafting K4 Sections 7 Insert View Section Overview of further sections: Half Section: Part will be cut only half way Revolved Section: Turned section view in a revolved part. Folded Section Unfolded Point to Point Section Unfolded Point and Angle Section Break-out Section Version 2-33-
Drafting K5 Edit views Übersicht K5-1 K5-2 K5-3 K5-4 K5-5 Version 2 Move/Copy views Align views View Boundary Modify 3D-Elements in view Sketch in drawing -42-
Drafting K5 Move/Copy views 1 Home Group: View Move/Copy View alternative: Edit View Move/Copy View Move/copy views in defined direction. Normally this can be done directly by mouse. directions to move copy yes/no name of the new view distance between the views Version 2-43-
Drafting K6 Detailing Overview K6-1 K6-4 K6-6 K6-7 K6-8 Version 2 Center lines Balloon Welding Symbol Surface Symbol Custom Symbol -48-
Drafting K6 Centerlines1 Home Group: Annotations Centerlines alternative: Menu Insert Centerline Dependent on the preferences the centerlines will be created automatically. Drafting Preferences Note: Centerline Handles to modify the lines Different overhangs:: Cursor on center point MB3 specify extension individually Diagonal centerlines see settings angle Center Mark Optionally: display as center point (also via MB3) Version 2-49-
Drafting K7 Dimension Overview K7-1 Rapid K7-3 Settings K7-4 Parameter blocs K7-6 Cylindrical K7-7 Angular K7-8 Baseline K7-9 Ordinate K7-11 automatic./manual Dimension Version 2-60-
Drafting K7 Dimension 1 Dimension The most used function is Rapid Dimension. With method "inferred" the function will provide the right dimension due to the selected element. Home Group: Dimension Rapid alternative: Menu Insert Dimension Rapid e.g. cylindrical with diameter symbol only sketch dimensions Note: "Snap points" in the selection bar Define the snap function. Which points should be selected! Version 2-61-
Drafting K7 Ordinate Dimension 10 Ordinate one/two directions Add a missing dimension: 1. Select ordinate origin 2. Activate the function "ordinate" 3. Select new element + position dimension 4. Close Version 2-70-
Drafting K8 Annotations Overview K8-1 K8-4 K8-6 K9-1 Version 2 Create a Note Feature Control Frame Datum Feature Symbol Track Changes -73-
Drafting K8 Create a Note 1 Home Group: Annotations Note alternative: Menu Insert Annotation Note Workflow: 1. Insert text 2. Text position a) direct position (without leader) or b) Drag from an edge (with leader) Note Alignment: Associative = always related e.g. to view Non -associative = align only while creation afterwards no relations Off = no relation Version 2-74-
Drafting Index Version 2-82-