~!i\. Uil National Voluntary ~' \~LA>:ij: Laboratory Accreditation Program SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Northwest EMC, Irvine Lab 4 1 Tesla Ave. Irvine, CA 92618 Mrs. Vicki Albertson Phone: 503-844-4066 Fax: 503-844-3826 Email: valbertson@nwemc.com http://www.nwemc.com ELECTROMAGNETIC COMPATIBILITY & TELECOMMUNICATIONS NV.LAP LAB CODE 200676-0 Emissions Designation EN 12895 (2000) EN 12895 (2015) EN 55012 (2007) +Al (2009) EN 55103-l (2009) +Al (2012) IEC 61000-6-4 (2006-07) EN 61 000-6-4 (2007) IEC 61000-6-3 (2006-06) IEC 61000-6-3 (2006) +Al (2010) Description Industrial tn1cks - Electromagnetic compatibility Industrial trucks - Electromagnetic compatibility Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers ElectTOmagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards - Emission Standard for Industrial Environments Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emjssion standard for resndential, commercial and I ight-industrial environments Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for resndential, commercial and I ight-industrial environments For the National Volunta v Pagel of30
IEC 61000-6-4 (2006) +Al (2010) EN 61000-6-4 (2007) + A I (20 I I) EN 61000-6-3 (2007) +Al. (2011) EN 61000-6-3 (2007) KN 61000-6-3 (2012-06) KN 61000-6-4 (2012-06) EN 61326-2-1 (2013) BS EN 61326-2-2 (2006-06) EN 61326-2-1 (2006-05) EN 61326-2-3 (2006-08) EN 61326-2-3 (2013) EN 61326-2-2 (2013) JEC 6 1326-1 Ed. 2.0 (2012) EN 61326-2-6 (2013) EN 61326-2-6 (2006) and IEC 61326-2-6 (2005) EN 62040-2 (2006) Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments Electromagnetic compatibility (EMC) - Part 6-3: Generic standard - Emission standard for residential, commericial and light industrial environments Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for EMC unprotected applications EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems EMC requirements. Particular requirements. Test configurations, operational conditions and performance criteria for EMC unprotected applications EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning Electrical equipment for measurement, control and laboratory use. EMC requirements - Part 2-3: Particular requirements -Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning EMC requirements. Particular requirements. Test configurations, operational conditions and perfom1ance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements Electrical equipment for measurement, control and laboratory use. EMC requirementsparticular requirements. In vitro diagnostic (IVD) medical equipment Electrical equipment for measurement, control and laboratory use. EMC requirements. Particular requirements. In vitro diagnostic (IVD) medical equipment Uninterruptible power systems (ljps) - Part 2: Electromagnetic compatibility (EMC) req ui rem en ts Page 2 of30
ISO 7637-2, Second edition (2004) + Al (2008) ANSI C63.26 (2015) ANSI C63.10-2009 ANSI C63.10 (2013) AS/NZS CISPR 11 (2011) IEC/CISPR 11, Ed. 4.1 (2004-06) + A2 (2006) EN 550 11 (2007) + A2 (2007) EN 550 11 (2009) + Al (2010) IEC/CISPR 11 Ed. 6.0 (2015) IEC/ClSPR 11 Ed. 6.1 (2015) + A I (2016) IEC/CISPR 11Ed5 (2009-05) + Al (2010) CISPR 12 (2007) + Al (2009) IEC/CISPR 13 (2001-04), EN 55013 (2001 ), AS/NZS CISPR 13 (2003), and CNS 13439 (2001) CISPR 13, Edition 4.2 (2006-03) EN 55013 (2001) + Al (2003) + A2 (2006) EN 55013 (2013) BSEN55013(2013)+Al (2016) CNS 13439 (2004) Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services American National Standard for Testing Unlicensed Wireless Devices American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement Industrial, scientific and medical (ISM) radio frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement Sound and broadcast receivers and associated equipment - Radio dlisturbance characteristics - Limits and methods of measurement Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement Page 3 of30
IEC/CISPR 13, Ed. 5.0 (2009-06) EN 55014-1 (2006) EN 55014-1 (2006) +Al (2009) +A2 (20 11) IEC/CISPR 14-1, Ed. 5.0 (2005) TEC/OSPR 14-1, Ed. 5.0 (2005) + Al (2008) + A2 (2011) IEC/CISPR 14- I :2016 CISPR 15 (2009) EN 55022 (2006) +Al (2007) EN 55022 (1998) + Al(2000) + A2(2003) lec/clspr 22, Edition 5 (2005) + A I (2005) + A2 (2006) CNS 13438 (2006) (up to 6GHz) EN 55022 (2010) IEC/CISPR 22 Ed. 6.0 (2008-09) IEC/CISPR 25, Ed. 3.0 (2008-03) CISPR 32, Ed. l (2012-01) EN 55032 (2012-05) AS/NZS CISPR 32 (2013) CISPR 32 (2015) AS/NZS CISPR 32 (2015) Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement Electromagnetic Compatibility - Requirements for household appliances, electric tools and similar apparah1s - Part 1: Emission Electromagnetic Compatibility Requirements for household appliances, electric tools and similar apparatus - Part 1: Emissions Electromagnetic Compatibility - Requirements for Household Appliances, Electric Tools and Similar Apparatus - Part 1: Emission Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission Limits and methods of measurements of radio disturbance characteristics of electrical lighting and similar equipment Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement LI mi ts and Methods of Measurement of Radio Interference Characteristics oflnformation Technology Equipment Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement Limits and Methods of Measurement of Radio Dishirbance Characteristics of Information Technology Equipment Radio dishirbance characteristics for the protection ofreceivers used on board vehicles, boats, and on devices - Limits and methods of measurement Electromagnetic compatibility of multimedia equipment - Emission requirements Electromagnetic compatibility of multimedia equipment. Emission requirements Electromagnetic compatibility of multimedia equipment - Emission requirements Electromagnetic compatibility of multimedia equipment - Emission requirements Electromagnetic compatibility of multimedia equipment - Emission requirements Page 4 of30
CNS 14757-2 (1992-07) IEC 60255-26(2013-05) IEC 6 1000-3-2, Ed. 3.0 (2005-1 L) IEC 6 1000-3-2, Ed. 3.0 (2005) +Al (2008) +A2 (2009) EN 61000-3-2 (2006) +A 1 (2009) + A2 (2009) EN 61000-3-2 (2006) EN 61000-3-2 (2014) lec 61000-3-2 Ed. 3.2 (2009) KN 61000-3-2 (Annex 1-11); RRA 2014-37 (Sept. 23, 2014) IEC 61000-3-2, Ed. 4.0 (2014-05) IEC/EN 61000-3-3(1995) + A1 (200 I)+ A2 (2005) EN 61000-3-3, Ed. 2.0 (2008-09) EN 61000-3-3 (2013) IEC 61000-3-3 Ed. 2.0 (2008) TEC 61000-3-3 Ed. 3.0 (2013-05) KN 61000-3-3 (Annex 1-12); RRA 2014-37 (Sept. 23, 2014) Uninterruptible power systems (UPS) - Part 2: Electromagnetic Compatibility (EMC) requirements Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) Electromagnetic compatability (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for hannonic current emissions (equipment input current <= 16 A per phase) Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current= 16 A per phase) Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for hannonic current emissions (equipment input current <= l 6A per phase) Test Method for Electromagnetic Interference; Korean only Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current= 16 A per phase) Conducted Emissions, Voltage Flicker EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection EMC- Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current =16 A per phase and not subject to conditional com1ection (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection Test Methods for Electromagnetic Interference; Korean only Page 5 of30
IEC 61000-3-1 1, 1st edition (2000-08) KN 61000-3-1 1 (Annex 1-12); RRA 2014-37 (Sept. 23, 2014) EN 61000-3-12 (2011) KN 61000-3-12 (Annex 1-11); RRA 2014-37 (Sept 23, 2014) EN 50270 (2015) FCC OST/MP-5 (1986) ANSI C63.4 (2009) with FCC Method - 4 7 Part 11. ANSI C63.4 (20 14) ANSI C63.4 (2009) ANSI C63.17 (2006) and ANSI C63.4 (2003) ANSI C63. l 0 (2013) ANSI C63. I 0(2013) ANSI C63.10 (2013) ANSI C63.10 (2013) ANSI C63.10 (2013) ICES-003 Issue 5 (2012) ICES-003 Issue 6 (2016) ICES-005 Issue 3 (May 2009) ICES-005 Issue 4 (Dec 2015) ICES-006 Issue 2 (2009) EMC - Part 3-11: Limits - Limitation of voltage changes, voltage flucniations and flicker in public low-voltage supply systems -Equipment with rated current <=75A and subject to conditional connection Test Methods for Electromagnetic Interference; Korean only Electromagnetic Compatibility (EMC) - PART 3-12: Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16A and less than or equal to 75A Test Methods for Electromagnetic Interference; Korean only Electromagnetic Compatibility - Electrical Apparatus For The Detection And Measurement Of Combustible Gases, Toxic Gases Or Oxygen FCC Methods of Measurement of Radio Noise Emissions for ISM Equipment (cited in 47 CFR FCC Part 18 - Industrial, Scientific, and Medical Equipment) Emergency Alert System (EAS) Unintentional Radiators in 47 CFR FCC Part 15, Subpart B Unintentional Radiators in 47 CFR FCC Part 15, Subpart B Unlicensed Personal Communications Service Devices in 47 CFR FCC Part 15, Subpart D Intentional Radiators in 47 CFR FCC Part I 5, Subpart C Unlicensed National Information Infrastructure Devices without DFS Intentional Radiators in 47 CFR FCC Part 15, Subpart E Ultra-Wideband Operation Intentional Radiators in 47 CFR FCC Part 15, Subpart F Access Broadband Over Power Line (Access BPL) Intentional Radiators in 47 CFR FCC Part 15, Subpart G White Space Device Intentional Radiators in 47 CFR FCC Part 15, Subpart H Information Technology Equipment (ITE) - Limits and methods of measurement Information Technology Equipment (ITE) - Limits and methods of measurement Radio Frequency Lighting Devices Radio Frequency Lighting Devices AC Wire Carrier Current Devices (Unintentional Radiators) Page 6 of30
ICES-00 l Issue 4 (2006) FCC KDB 789033 (June 6, 2014) FCC KDB 789033 (April 8, 2016) FCC KDB 9054 62 (May 15, 2015) FCC KDB 905462 (April 8, 2016) KN! l (Annex 2) with RRA Announce 2012-21 (Jun. 28, 2012) KN! l (Annex 2) with RRA Announce 2013-24 (June 17, 2013) KN14- l (Annex 4) with RRA Announce 2012-21 (Jun. 28, 2012) KN14-l (Annex 4) with RRA Announce 2013-24 (Jun. 172013) KN 14-2 (Annex 4) RRA Announce 2014-92 (Dec29,2014) RRA Announce 2013-24, June 17, 2013;Korean only KN22 (Annex 5) with RRA Announce 2012-21 (Jun. 28, 2012) KN22 (Annex 5) with RRA Announce 2013-24 (June 17, 2013) KN 301-489-07 (Annex 8-2); RRA Announce2012-21,(Jun 28,2012) KN 301-489-07 (Annex 8-2); RRA Announce2013-24,(Jun 17,2013) KN 301-489-24 (Annex 8-4); RRA Announce2012-21,(Jun 28,2012) KN 301-489-27(Annex 8-14); RRA Announce2012-2 l (Jun. 28,2012) KN 32:2013 (Annex 16) Industrial, Scientific and Medical (ISM) Radio Frequency Generators Guidlioes for Compliance Testing of Unlicensed National Information Infrastructure (U NI!) Devices PART 15, SUBPART E Guidelines for Compliance Testing of Unlicensed National Information Infrastructure (U NII) Devices PART 15, SUBPART E Compliance measurement procedures for unlicensed-national information infrastructure devices operating in the 5250-5350 MHz a.nd 5470-5725 MHz bands incorporating dynamic frequency selection Compliance measurement procedures for unlicensed-national infonnation infrastructure (U-NII) devices operating in the 5250-5350 MHz and 5470-5725 MHz bands incorporating dynamic frequency selection; FCC Part 15 Subpart E Test Method for Electromagnetic Interference; With KN 11 (Annex 2). K Only Test Method for Electromagnetic Interference; With KN 11 (Annex 2) Korean Only Test Method for Electromagnetic Interference; (RRA Announce 2012-21, June 28, 2012) K only Test Methods for Electromagnetic Interference (RRA Announce 2013-24, June 17, 2013) Korean only Test Methods for Electromagnetic Susceptibility (RRA Announce 2014-92, Dec 29, 2014) Korean only Test Methods for Electromagnetic Interference using KN 16-1-1, KN 16-1-2, KN 16-1-3, KN 16-1-4, KN 16-1-5, KN 16-2-1, KN 16-2-2, KN 16-2-3, KN 16-2-4 (2008-05) Test Methods for Electromagnetic Interference (RRA Announce 2012-21, June 28, 2012) K only Test Method for Electromagnetic Interference (RRA Announce 2013-24, June 17, 2013) Korean only Test Methods for Electromagnetic Interference (RRA Announce 2012-21, (June 28, 2012) K only Test Method for Electromagnetic Interference (RRA Announce 2013-24, (Jw1e 17, 2013) K only Test Methods for Electromagnetic Interference (RRA Announce 2012-21, June 28, 2012) K only Test Methods for Electromagnetic Interference (RRA Announce 2012-21, June 28, 2012) K only Test Methods of radio disturbance for multimedia equipment Page 7 of30
KN 32:2015 (Annex 11) KN 30 1 489-1 (Annex 8-1) w/ RRA Announce 2013-24 (6/17/2013) KN 301 489-3 (Annex 8-8) w/ RRA Announce 2013-24 (6117/1 3) KN 301 489-17 (Annex 8-3) w/ RRA Announce 2013-24 (6/ 17/ 13) KN 30 I 489-24 (Annex 8-4) w/ RRA Announce 2013-24 (6/ 17/ 13) KN 301 489-27 (Annex 8-14) w/ RRA Announce 2013-24 (6/ 17/1 3) KN 61000-6-3 (Annex 14) with RRA Announce 2013-24 (6/17/1 3) KN 61000-6-4 (Annex 15) with RRA Anounce 2013-24(6/ 17/2013) RRA 20 13-3 and 2013-24, June 17, 2013, Korean only RRA 20 14-8 and RRA 2014-37 (June 23, 2014) RRA Public Notification 2011-24, K only (Dec 23, 2011) RRA Announce 2015-110 (Dec. 3, 2015); K only RRA Public Notification 2015-27 (Dec. 03 2015) SI 961part6.1 AS/NZS CISPR 22 (2009) AS/NZS CISPR 22 (2009) +A I (2010) TCVN 7189:2009 (CISPR 22:2006) Agreement ofvcci V-3 (2014.04) Test Methods of radio disturbance for multimedia equipment Test Method for Electromagnetic Interference; With KN 301 489-1 (Annex 8-1) Korean Only Test Method for Electromagnetic Interference; With KN 301 489-03 (Annex 8-8) Korean Only Test Method for Electromagnetic Interference; With KN 301 489-17 (Annex 8-3) Korean Only Test Method for Electromagnetic Interference; With KN 301 489-24 (Annex 8-4) Korean Only Test Method for Electromagnetic Interference; With KN 301 489-24 (Annex 8-14) Korean Only Test Method for Electromagnetic Interference; With KN 61000-6-3 (Annex 14) Korean Only Test Method for Electromagnetic Interference; With KN 61000-6-4 (Annex 15) Korean Only Teclmical Requirements and Test Methods for Electromagnetic Interference; K only (See specific Annexes listed on scope) Technical Requirements and Test Methods for Electromagnetic Interference; K only (See specific Annexes listed on scope) Technical Requirements for Electromagnetic Interference (K only) Test Methods for Electromagnetic Compatibility; Korea only Technical Requirements for Electromagnetic Compatibility; Korea only Electromagnetic compatibility: Information technology equipment - Radio frequency interference characteristics-limits and methods of measurements Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement Information Technology Equipment-Radio disturbance characteristics - Limits and methods of measurement Agreement of VCCI Council - Technical Requirements: V-3/2014.04 (including radiated disturbance > I GHz) Page 8 of30
Agreement ofvcci V-3 (2015.04) ANSI C63.l7 (2013) EN 55015 (2013) Immunity Desienation EN 50130-4 (1995) + Al(l998) & A2(2003) EN 50130-4 (2011) EN 55103-2 (1996) EN 55103-2 (2009) KN 60601-1-2 (Annex 2), RRA 2012-22, K only (Jun. 28, 2012) KN 60601-1-2 (Annex 2), RRA 2013-25, K only (Jun. 17, 2013) EN 60945 (2002) and IEC 60945 (2002) TEC 61000-6-1, 2nd edition (2005-03) IEC 61000-6-2, Edition 2.0 (2005-0 1) EN 61000-6-2 (2005) EN 61 000-6-1 (2007) KN 61000-6-1(Annex 11); RRA Announce 2012-22 (Jun 28, 2012) KN 61000-6-1 (Annex 11 ); RRA Announce 2013-25 (Jun 17, 2013) Agreement ofvcci Cotmcil - Technical Requirements: V-3/2015.04 (including radiated disturbance > I GHz) Unlicensed Personal Colillilunications Service Devices in 47 CFR FCC Part 15, Subpart D Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment Description Alarm systems - Part 4. Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alann systems Alarm systems. Electromagnetic compatibility. Product family standard. Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alann systems Electromagnetic compatibility - Product family standard for audio. video, audio-vis.ual and entertairunent lighting control apparatus for professional use - Part 2: Immunity Electromagnetic compatibility - Product family standard for audio, video, audio-visual and enterta'inment lighting control apparatus for professional use - Part 2: Immunity Confonnity Assessment Procedl!lre for Electromagnetic Susceptibility (K only) Conformity Assessment Procedure for Electromagnetic Susceptibility (K only) Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, corrunercial and I ight-industrial environments Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial envirorunents Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial envirorunents Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments Test Method for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 2012) Konty Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June 17. 2013) Korean only Page 9 of30
KN 61000-6-2(An.nex 14); RRA Announce 2012-22 (Jun.28,2012) KN 61000-6-2 (Annex 14) w/ RRA Announce 2013-25 (6/17/13) EN 6 1326-1 (2006) EN 61326-1 (2013) IEC 61326-2-6 Ed. 2.0 (2012) EN 55014-2 (1997) +Al (2001) + A2 (2008) TEC/CISPR 14-2 Ed. 1.2 (2008) TEC/CISPR 14-2 Ed. 2. (2015) IEC/ClSPR 14-2 (2001) Ed. 4 and EN 55014-2 ClSPR 16-2-3 (2016) EN 55020 (2007) + Al2 (2016) IEC/CISPR 20 (2006) EN 55020 (2007-01) +All (2011) CISPR 20 (2006) +Al (2013) IEC/CISPR 24 (1997) and EN 55024(1998) + A 1(2001), A2(2003) EN 55024 (20 l 0) JEC 61000-4-2, Ed. 2.0 (2008-12) IEC 61000-4-3, Ed. 3.0 (2006-02) + Al (2007) + A2 (2010) Test Method for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 20 J 2) Konly Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June J 7, 20 J 3) Korean only Electrical equipment for measurement, control and laboratory use - EMC requirements Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Immun.ity Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity- Product family standard Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard Electromagnetic compatibility - R equirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard Specification for radio disturbance and immun.ity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immw1.ity - Radiated disturbance measurements Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement Sound and television broadcast receivers and associated equipment - llmnunity characteristics - Limits and methods of measurement Sound and television broadcast receivers and associated equipment - immunity characteristics - Limits and methods of measurement Sound and television broadcast receivers and associated equipment - hmnunity characteristics - Limits and methods of measurement Information technology equipment - Immunity characteristics - Limits and methods of measurement Information technology equipment. Immunity characteristics. Limits and methods of measurement Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test Electromagnetic compatibility (EMC) - Part 4-3: Testing measurement techn.iques - Radiated, radio-frequency, electromagnetic field i1mnun.ity test Page 10 of30
EN 61000-4-3 (2006) +Al (2008) + A2 (2010) lec 61000-4-3, Ed. 3.1 (2008-04) IEC 6 1000-4-3 Ed. 3.2 (2010) IEC 61000-4-4, Ed. 2.0 (2004-07) IEC 61000-4-4, Ed. 2.0 +Al (2010) IEC 61000-4-4(2012-04) IEC 6 1000-4-5, Ed 1.1 (2005-11) IEC 6 1000-4-5 Ed. 3.0 (May 2014) IEC 61000-4-6 Ed. 3.0 (2008) lec 61000-4-6 Ed. 4.0 (2013)!EC 6 1000-4-8, Ed. I.I (2001); EN 61000-4-8 IEC 61000-4-8 (2009) TEC 61000-4-1 t, Ed. 2 (2004-03) & EN 61000-4-11 IEC 61000-4-13 Ed. 1.1 (2002) + A 1 (2009) + A2 (2015) IEC 61000-4-28 ( 1999) +Al (2001) + A2 (2009) KN 61000-4-11 (Annex 1-7) RRA Announce 20 l 2-22(Jun.28, 2012) KN 61000-4- 11 (Annex 1-7) RRA Announce 2013-25(June 17, 2013 Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio- Frequency, electromagnetic field immunity test Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immwtity test Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical Fast Transient/Burst Immunity Test Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst imrnwtity test EMC - Part 4-5: Testing and measurement techniques - Surge immunity test Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge nmmunity test Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test Electromagnetic compatibility (EMC) - Part 4-1 1: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immun.ity tests Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interhannonics including mains signalling at a.c. power port, low frequency immunity tests Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase Test Method for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 2012) K only Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June 17, 2013) Korean only Page 11 of30
KN 14-2 (Annex 4) RRA Announce 2013-25(June 17, 2013) KN 24 (Annex 5) with RRA Announce 2012-22 (Jun. 28, 2012) KN 24 (Annex 5) with RRA Announce 2013-25 (Jun. 17, 2013) KN 61000-4-2 (Annex 1-1) RRA Announce 2012-22(Jun. 28, 2012) KN 61000-4-2 (Annex 1-1) RRA Announce2013-25(June17, 2013 KN 301-489-01 (Annex 8-l);RRA Announce 2012-22(Jun. 28,2012) KN 301-489-07 (Annex 8-2); RRA Announce 2012-22(Jun 28,2012) KN 301-489- 17 (Annex 8-3); RRA Announce 2012-22(Jun 28,2012) KN 301-489-24 (Annex 8-4); RRA Announce 20 I 2-22(Jun 28,2012) KN 301-489-24 (Annex 8-4); RRA Announce 2013-25(Jun 17,2013) KN 301-489-03 (Annex 8-8); RRA Announce 2012-22(Jun.28,2012) KN 301-489-03 (Annex 8-8); RRA Announce 2013-25(Jun. l 7,2013) KN 35:2015 (Annex 15) KN 61000-4-3 (Annex 1-2) RRA Announce 20 l 2-22(Jun. 28, 2012) KN 61000-4-3 (Annex 1-2) RRA Announce 2013-25 (June 17, 2013 KN 301 489-7 (Annex 8-2) w/ RRA Announce 2013-25 (6/17/13) KN 301 489-1 (Annex 8-1) w/ RRA Announce 2013-25 (6/17/13) KN 301 489-17 (Annex 8-3) w/ RRA Announce 2013-25 (6/17/13) Confonnity Assessment Procedure for Electromagnetic Susceptibility; with KN 14-2 (Annex 4); K only Test Method for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 2012) K only Test Method for Electromagnetic Susceptibility (RRA Annmmce 2013-25, June 17, 2013) Konly Test Method for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 2012) Konly Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June 17, 2013) Korean only Test Method for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 2012) Konly Test Method for Electromagnetic Susceptibility (RRA Annmmce 2012-22, June 28, 2012) Konly Test Method for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 2012) Konly Test Method for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 2012) Konly Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June 17, 2013) Konly Test Method for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 2012) Konty Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June 17, 2013) Konly Electromagnetic compatibility of multimedia equipment - Immunity Requirements Test Method for Electromagnetic SusceptibiLity (RRA Annmmce 2012-22, June 28, 2012) Konly Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June 17, 2013) Korean only Test Method for Electromagnetic Susceptibility; With KN 301 489-7 (Annex 8-2) Korean Only Test Method for Electromagnetic Susceptibility; With KN 301 489-1(Annex8-1) Korean Only Test Method for Electromagnetic Susceptibility; With KN 301 489-17 (Armex 8-3) Korean Only Page 12 of30
KN 61000-4-4 (Annex 1-3) RRA Announce 2012-22(Jun. 28, 2012) Test Methods for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 2012) K only KN 61000-4-4 (Annex 1-3) RRA Announce 2013-25 (June 17, 2013 KN 61000-4-5 (Annex 1-4) RRA Announce 2012-22(Jun. 28, 2012) KN 61000-4-5 (Annex 1-4) RRA Announce2013-25(June17, 2013 KN 61000-4-6 (Annex 1-5) RRA Announce 2012-22(Jun. 28, 2012) KN 61000-4-6 (Annex 1-5) RRA Announce2013-25(June17, 2013 KN 61000-4-8 (Annex l -6) RRA Announce2012-22(Jun. 28, 2012) KN 61000-4-8 (Annex 1-6) RRA Announce2013-25(June17, 2013 Lloyd's Register - LR Type Approval System Lloyd's Register - LR Type Approval System Lloyd's Register - LR Type Approval System RRA 2013-4 and RRA2013-25, June 17, 2013, Korean only RRA 2014-09 and RRA 2014-38 (June 23, 2014) K only SI 961 part 6.2 ClSPR TR 16-3 Ed. 3 (2015-09) Product Safety Designation lec 60601-1-2, Ed 2.l (2004-l l) & EN 6060 l-l-2 (2002) TEC 60601-1-2, Ed. 3.0 (2007) Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June 17, 2013) Korean only Test Method for Electromagnetic Susceptibility (RRA Annmmce 2012-22, June 28, 2012) Konly Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June 17, 201 3) Korean only Test Method for Electromagnetic Susceptibility (RRA Announce 2012-22, June 28, 2012) Konly Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June 17, 2013) Korean only Test Method for Electromagnetic Susceptibility (RRA Annmmce 2012-22, June 28, 2012) K only Test Method for Electromagnetic Susceptibility (RRA Announce 2013-25, June 17, 2013) Korean only Test Specification Number l (2002) Test Specification Number I (2013) Test Specification Number I (2015) Technical Requirements and Test Methods for Electromagnetic Susceptibility; Korean only (See specific Annexes listed on scope) Technical Requirements and Test Methods for Electromagnetic Susceptibility; Korean only (See specific annexes listed on scope) Electromagnetic compatibility: Information teclmology equipment - Immunity characteristics - Limits and methods of measurements Specification for radio disturbance and immunity measuring apparatus and methods Part 3: CISPR technical reports Description Medical electrical equipment - Part l-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests Medical electrical equipment - Part l-2: General requirements for safety - Collateral standard: Electromagnetic compatibility - Requirements and tests Page 13 of30
IEC 60601-1-2, Ed. 4, (2014-02) EN 60601-1-2 (2007) lec 60601-2-4 ed3.0 (2010), Clause 202 EN 60601-2-4 (2003), Clause 202 TEC 60601-2-25 ed 2.0, (2011-10), Clause 202 IEC 60601-2-27:2005 EN 60601-2-27:2006 lec 60601-2-27 ed3.0 (2011), Clause 202 lec 60601-2-30 (1999), EN 60601-2-30 (2000) IEC 60601-2-31 (2008) + Al (2011) TEC 60601-2-47 (2006), EN 60601-2-47(2001) TEC 60601-2-47 Ed. 2.0 (2012-02), Clause 202 EN 60601-2-24 (1998) EN 60601-2-37 (2008) IEC 60601-2-26 (2003); EN 60601-2-26 (2003) lec 60601-2-26, Ed. 2.0 (2002-1 1) lec 60601-2-26 ed3.0 (2012-05) lec 62040-1-2:2002 Medical electrical equipment-part 1-2: General requirements for basic safety and essential perfonnance-collateral Standard: Electromagnetic disturbances-requirements and tests Medical electrical equipment - Part 1-2: General requirements for safety - Collateral standard: EMC - Requirements and tests Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential perfonnance of cardiac defibrillators Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of cardiac defibrillators Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential perfonnance of electrocardiographs Particular requirments for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment Medical electrical equipment - Part 2-27: Particular requirements for the safety, inc:tuding essential performance, of electrocardiograpbic monitoring equipment Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment Particular requirements for the safety including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment Medical electrical equipment - Part 2-3 1: Particular requirements for the basic safety and essential perfonnance of external cardiac pacemakers with internal power source Particular requirements for the safety, including essential performance, of ambulatory electrocardiographic systems Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems Medical electronic equipment Part 2-24: Particular requirements for the safety of infusion pumps and controllers Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment Medical Electrical Equipment Part - 2-26: Particular Requirements for the Safety of Electroencephalographs Medical Electrical Equipment - Part 2-26: Particular Requirements for the Safety of Electroencephalographs Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential perfonnance of electroencephalographs Uninterruptible power systems (UPS) Part 1-2: General and safety requirements for UPS used in restricted access locations Page 14 of30
ISO 9919 ed2.0 (2005), Clause 36 Medical electrical equipment - Particular requirements for the basic safety and essential perfonnance of pulse oximeter equipment for medical use Radio Designation ETSI EN 300 220-2 V2. l.2 (2007-06) ETSI EN 300 220-1 V2.3. l (2010-02) ETSI EN 300 220-1 V2.4. l (2012-05) ETSI EN 300 220-2 V2.4.1 (2012-05) ETSI EN 300 328 VI. 7.1 (2006-10) ETSI EN 300 328 V 1.8.1 (2012-06) ETSI EN 300 328 Yl.9.1 (2015-02) ETSI EN 300 328 V2. l. l (2016-11) ETSI EN 300330-2V1.3. 1 (2006-04) ETSI EN 300 330-2 V 1.5.1 (2010-02) ETSI EN 300 330-1 Vl.7.1 (2010-02) ETSI EN 300 330-2 Vl.6.1 (2015-03) Description ERM; Short Range Devices; Radio Equipment to be used in the 25MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 550 mw; Part 2: Supplementary Parameters Not Intended for Conformity Purposes Electromagnetic Compatibility Radio Spectrum Matters; Short Range Devices; Radio Equipment to be used in the 25 MHz to 1,000 MHz Frequency Range with Power Levels Ranging up to 500mW; Part 1: Technical Characteristics and Test Methods (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to I 000 MHz frequency range with power levels ranging up to 500 mw; Part 1: Technical characteristics and test methods (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to l 000 MHz frequency range with power levels ranging up to 500 mw; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 1.2 of the R&TTE Directive ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive ERM; Wideband Transmission Systems; Data transport equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Hannonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive ERM; Short Range Devices; Radio Equipment in the Frequency Range 9kHz to 25 MHz and Inductive Loop Systems in the Frequency R~mge 9kHz to 30 MHz; Part l: Technical Characteristics and Test Methods ERM; Short Range Devices (SRD); Radio Equipment in the Frequency Range 9kHz to 30 MHz; Part 2: Harmonized EN U11der Article 3.2 of the R&TTE Directive Page 15 of30
ETSI EN 300 330-I V 1.8. I (2015-03) ETSI EN 300 440-1 V 1.6. I (2010-08) ETSI EN 300 440-2 vl.4.1 (20I0-08) ETSI EN 30I 166-1 Vl.3.2 (2009-1 I) ETSI EN 301 166-2 Vl.2.2 (2008-08) ETSI EN 301 166-2 Vl.2.3 ETSI EN 301 357-2 v l.4.1 (2007-12) ETSI EN 301 357-1 Vl.4.1 (2008-11) ETSI EN 301 489-9 vl.4.1 (2007-11) ETSI EN 30 l 489-3 v 1.4. l (2002-08) ETSI EN 30 l 489-5 v l.3. l (2002-08) ETSI EN 301 489-8 v 1.2.1 (2002-08) ETSI EN 30 l 502 v9.2.1 (2010-10) ETSI EN 301 502 vl0.2.l (2012-11) ERM; Short Range Devices; Radio Equipment in the Frequency Range 9k.Hz to 25 MHz and Inductive Loop Systems in tl1e Frequency Ra:nge 9kHz to 30 MHz; Part I: Technical Characteristics and Test Methods Electromagnetic compatibility and Radio spectnun Matters (ERM): Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency ra:nge; Part 2: Hannonized EN under article 3.2 of the R&TTE Directive ERM; Land Mobile Service: Radio equipment for analogue and/or digital communication and operating on narrow band channels and having an antem1a connector; Part I : Technical characteristics and methods of measurement ERM; Land Mobile Service; Radio equipment for analogue and/or digital communication and operating on narrow band channels and having an antenna co1u1ector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE ERM; Land Mobile Service; Radio equipment of the analogue and/or digital communication and operating on narrow band channels and having an antenna connector; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&T ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz. Part 2: Harmonized EN covering essential requirements of 3.2 of the R&TTE Directive ERM; Cordless Audio Devices in the Range 25 MHz to 2,000 MHz; Pa:rt l: Technical Characteristics and Test Methods ERM; EMC standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices Electromagnetic compatibility and Radio spectnun Matters; ElectroMagnetic Compatibility standard for radio equipment and services; Pa:rt 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 khz and 40 GHz Electromagnetic compatibility & Radio spectmm Matters (ERM); EMC standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) ElectroMagnetic compatibility a:nd Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 8: Specific conditions for GSM base stations Global System for Mobile communications (GSM); Hannonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive Global System for Mobile communications (GSM);Hannonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive Page 16 of30
ETSI EN 301 502 v 11.1.1 (2014-07) EN 301 5 1 l V9.0.2 (2003-03) EN 30 l 51 1 V 12.1.l (2015-06) ETSI EN 301 839-2, v 1.2. l (2007-07) ETSI EN 301 839-1 V 1.3. l (2009-10) ETSI EN 301 839-2 v 1.3.1 ETSI EN 301 839 V2. l.l (2016-04) ETSI EN 301 893 V 1.5. I :2008 ETSI EN 301 893 Yl.6.1 (2011-11 ) ETSI EN 301 893 V 1.7. I (2012-06) ETSI EN 301 893, Vl.8.1 (2015-03) ETSI EN 301 908-1 V5.2.l (2011-05) EN 301 908-1 Y6.2.1 (2013-04) ETSI EN 301 908-2 V5.2. l (201 1-07) Global System for Mobile conumwications (GSM);Ha.rmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive Global System for Mobile communications (GSM); Hannonized EN for mobile stations in the GSM 900 and GSM 1,800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC) Global System for Mobile communications (GSM); Hannonized EN for mobile stations in the GSM 900 and GSM 1,800 bands covering essential requirements under article 3.2 of the R&TTE directive (1999/5/EC) ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive ERM; Radio equipment in the frequency range 402 MHz to 405 MHz for Ultra Low Power Active Medical Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive UltTa Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP AMI-P) operating in the frequency range 402 MHz to 405 MHz; Hannonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive Broadband Radio Access Networks (BRAN); 5 GHz high perfonnance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Broadband Radio Access Networks (BRAN); 5 GHz high perfonnance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for lmt-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 1: Harmonized EN for lmt-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive Base Stations, Repeaters and User Equipment for IMT-2000 Third-Generation cellular networks; Part 2: Harmonized EN for JMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive Page 17 of30
ETSI EN 301 908-2 V6.2.l (2013-04) ETSI EN 302 195-2 V 1.1.1 (2004-03) ETSI EN 30 I 489-1 VI.8.1 (2008-04) ETSI EN 301 489-1 Vl.9.2 (2011-09) ETSI EN 301 489-3 V 1.6.1 (2013-08) ETSI EN 301 489-7 v l.3.1 (2005-11) ETSI EN 301 489-17 V2. l. l :2009 ETSI EN 301 489-17 V2.2.1 (2012-09) ETSI EN 301 489-31 VI. I.I (2005) ETSI EN 301 489-23 vl.5.1 (2011-11) ETSI EN 301 489-24 vl.5. l (2010-10) EN 301 489-29 Vl.1.1 (2009-02) ETSI EN 301 489-50 Vl.2.1 (2013-03) ETSI EN 301 908-11 V5.2.1 (2011-07)!MT cellular networks;hannonized EN covering the essential requirements of article 3.2 of the R&TTE Directive;Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) (ERM); Radio equipment in the frequency range 9 khz to 315 khz for U1tra Low Power Active Medical Implants (ULP-AMI) and accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive ERM; E lectromagnetic Compatibilty (EMC); Standard for Radio Equipment and Services; Part 1: Common Technical Requirements Electromagnetic compatibility and Radio spectrnm Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements EMC s.tandard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecom1mmications systems (GSM and DCS); Short Range Devices ERM; EMC standard for radio equipment and services; Part 7: Specific conditions for moble and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) Electromagnetic compatibility and Radio spectrum Matters (ERM); EMC standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part J 7: Specific conditions for Broadband Data Transmission Systems Electromagnetic compatibility and Radio spectnun Mat1ers (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9kHz to 3 l5khz band for Ultra Low Pwer Active (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) Base Station (BS) radio, repeater and ancillary equipment (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment ERM; E lectromagnetic Compatibility (EMC) standard for radio equipment and services; Part 29: Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz and 405 MHz to 406 MHz bands Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50 (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third Generation cellular networks; Part 11: Harmonized EN for JMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering the essential Page 18 of30
ETSI EN 301 908-13 V4.2.l (2010-03) ETSI EN 301 908-I3 V6.2.I (2013-10) ETSI EN 301 908-13 V7. 1.1 (2015-12) EN 301 908-15 V5.2. 1 ETSI EN 301 908-2, V7.l.I (20I5-I2) EN 302 195-1 V I. 1.1 (2004-03) ETSI EN 302 208-1 V 1.3.1 (2010-02) ETSI EN 302 208-1 Vl.4.1 (2011-11) ETSI EN 302 208-1 V2. I. I (2015-02) EN 302 208-2 v 1.2. l (2008-04) ETSI EN 302 208-2 Vl.4.1 (2011-11) ETSI EN 302 208-2 V2. l.l (2015-02) EN 302 291-1 V. 1.1.1 EN 302 291-2, vl.1.1 ERM; Base Stations (BS), Repeaters and User Equipment (UE) for lmt-2000 Third Generation cellular networks; Part 13: Harmonized EN for IMT-2000, Evolved Universal Terrestrial Radio Access (E-UTRA) (UE) covering the essential requirements of IMT cellular networks; Harmonized EN covering article 3.2 of the R&TTE Directive; Part 13: Evolved Universal Terrestrial Radio Access (E'UTRA) User Equipment (UE) IMT cellular networks; Hannonised EN covering the essential requirements of article 3.2 of the R&TIE Directive; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TIE Directive; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) (Repeaters) IMT cellular networks; Hannonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE) ERM; Radio equipment in the frequency range 9kHz to 3 l 5kHz for Ultra Low Power Active Medical Implants (ULP-AMl) and accessories; Part I: Technical characteristics and tes.t methods ERM; RF Identification Equipment operat1ng in the band 865 MHz 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods of measurement ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part l: Technical requirements and methods of measurement Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 Wand in the band 915 MHz to 921 MHz with power levels up to 4 W; Part 1: Technical requirements and methods of measurement ERM; RF Identification Equipment operating in the band 865 MHz 868 MHz with power levels up to 2 W; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive ERM; RF Identification Equipment operating in the band 865 MHz -868 MHz with power levels up to 2 W; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive Electromagnetic compatibility and Radfo spectrum Matters (ERM); Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 Wand in the band 915 MHz to 921 MHz with power levels up to 4 W; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive Electromagnetic compatibility and Radio spectnun Matters (ERM);Short Range Devices (SRD);Close Range Inductive Data Communication equipment operating at 13,56 MHz; Part I: Technical characteristics and test methods ERM; Short Range Devices; Close Range Inductive Data Communication equipment operating at 13,56 MHz - Part 2: Harmonized EN covering essential requirements of Article 3(2) of the R&TTE Directive Page I9 of30