TownSteel Architectural Hardware MFG
TownSteel Inc. Quick Ship Guide Quick Ship Products on the road to you within 48 hours of receipt of purchase order and upon approval of credit. Terms and conditions on file at Townsteel Inc. TownSteel has been manufacturing high quality commercial grade builder s hardware for over twenty years. We take pride in our ability to maintain a product offering that is second to none. Our talented and dedicated engineering team is continually looking for new and improved methods of manufacturing as well as material sourcing. Our goal is to bring to you a broad range of quality architectural builder s hardware in a timely manner. With competitive pricing in order to keep your budget intact, TownSteel maintains the highest standards throughout the manufacturing process. We continually strive to bring to you and the marketplace products that exhibit quality, design, finish, durability, and function. page 1
Mortise Lock Sets MSE Series MSS Series Gala Imperial Regal Sentinel Tango EXTRA HEAVY DUTY GRADE 1 COMMERCIAL MORTISE LOCKS ANSI UL Door Thickness Backset Lockcase Armored Front Deadbolt Latchbolt Guardbolt Stopworks Strike IC Core Handing Finishes BHMA Certified Grade 1 mortise locks. Meets all Grade 1 security, operational, dimensional and cycling requirements of ANSI/BHMA A156.13-2002 Series 1000, Lock body conforms to Federal Standard FF-H- 106 Type 86/87 UL Listed (3 hour), for use on fire doors, single or pairs 1 3/4" standard 2 3/4" Heavy gauge steel 8" x 1 1/4" x 3/32". Accommodates flat doors & doors beveled 1/8" in 2". Wrought brass or stainless steel attached by machine screws to lockcase front 1" throw, stainless steel with hardened anti-saw pins Stainless steel latch and anti-friction insert Stainless Steel Push Button, Stainless Steel Brass or stainless steel, 4 7/8" x 1 1/4". curved-lip ANSI strike Small Format, 6 or 7pin, Solid Brass Construction, Handed. Reversible in field US26D & US32D page 2
Cylindrical Locks Extra Heavy Duty Grade 1 Cylindrical Lock - CTC Series Sentinel Quest Extra Heavy Duty Grade 2 Cylindrical Lock - CS Series EXTRA HEAVY DUTY GRADE 1 & GRADE 2 COMMERCIAL CYLINDRICAL LEVER LOCKS CTC Series - Extra Heavy Duty Grade 1 CS Series - Extra Heavy Duty Grade 2 Meet ANSI A156.2 Series 4000 Grade 1 UL/ULC listed for use on fire doors up to 3 hours Meet ADA requirements For door thickness from 1 5/8" to 2" 2 3/4" backset standard, 2 3/8" optional ASA strike standard Stainless Steel Latchbolt Non-handed Clutched mechanism standard I.C. available, small format, 6 or 7pin Standard ANSI A115.2 through bolt installation Available finish - US26D Available functions - F75, 76, 81, 84, 86, 87, single/double dummy Meet ANSI A156.2 Series 4000 Grade 2 UL/ULC listed for use on fire doors up to 3 hours Meet ADA requirements For door thickness from 1 3/8" to 2 1/4" 2 3/4" backset standard, 2 3/8" optional "T" strike standard, ASA strike optional Non-handed Clutched mechanism standard I.C. available, small format, 6 or 7pin Standard ANSI A115.2 through bolt installation Available finish - US26D Available functions - F75, 76, 81, 84, 86, 87, single/double dummy page 3
Interconnected Locks page 4
Deadbolts DBF-62 Series DBS-62 Series DBF-61 Series DBS-61 Series HEAVY DUTY GRADE 1 & GRADE 2 DEADBOLT LOCKS DBF Series-Heavy Duty Grade 1 DBS Series-Heavy Duty Grade 2 Meet ANSI A156.5 Grade 1 strength and operational requirements UL Listed deadbolt, 1" throw, stainless steel For door thickness from 1 3/8" to 2" 2 3/4 backset standard, 2 3/8 optional 1 1/8 x 2 3/4 lipless strikes 2 3/4 backset provided with 2 1/4 x 1 1/8 faceplate 2 3/8 backset provided with 2 1/4 x 1 faceplate Completely reversible I.C. available, small format, 6 or 7pin Available finish - US26D Meet ANSI A156.5 Grade 2 strength and operational requirements UL Listed deadbolt, 1" throw, stainless steel For door thickness from 1 3/8" to 1 3/4" 2 3/8 or 2 3/4 adjustable backset 1 x 2 1/4 faceplate 1 1/8 x 2 3/4 lipless strikes Schlage C 6 Pin Keyway standard Completely reversible I.C. available, small format, 6 or 7pin Available finish - US26D page 5
Grade 1 Door Closers TDC-70 TDC-40 TDC-85 HEAVY DUTY GRADE 1 COMMERCIAL DOOR CLOSERS TDC-40(Heavy Duty Multi-Size Grade 1) Comply with ANSI A156.4 Grade 1 UL and ULC listed Meet ADA requirements Heavy duty iron cast body All weather fluid, standard plastic cover Adjustable sweep and latch speeds Adjustable back-check standard Barrier free spring adjustable from size 1 to 6 Non-handed Tri-pack installation: regular, parallel arm or top jam Delay action, arms and drop plates options available Available finish: AL TDC-70/TDC-85 (Heavy Duty Power Adjustable Grade 1) Comply with ANSI A156.4 Grade 1 UL and ULC listed Spring power adjustable (Standard size 1-6, barrier free size 1/2"-4) Standard adjustable back-check, Standard PA bracket for tri-pack application All weather fluid, standard plastic cover Non-handed Arms and drop plates options available Available finish: AL page 6
Grade 2 & Grade 3 Door Closers TDC-50 Series (Grade 3) TDC-90 (Grade 2) MEDIUM DUTY GRADE 2 & GRADE 3 COMMERCIAL DOOR CLOSERS TDC-50 Series (Medium Duty Grade 3) Comply with ANSI A156.4 Grade 3 UL and ULC listed Universal application as standard All weather fluid Tri-pack with regular, parallel and top-jamb installation Standard closer spring sized to 3,4 with NO adjustment Standard adjustable sweep and latch speeds SNB sex bolts Non-handed Available finish: AL TDC-90 (Medium Duty Grade 2) Comply with ANSI A156.4 Grade 2 UL and ULC listed Cast aluminum body and corrosionresistant adjustable arm All weather fluid Standard adjustable sweep, latch and back-check Standard PA bracket for tri-pack application Barrier free spring adjustment from size 1 to 4 Standard spring adjustment from size 2 to 5 Non-handed Available finish: AL page 7
Heavy Duty Grade 1 Exit Devices ED1100- Rim Exit Device ED1100F- Fire Rim Exit Device Outside Trim ED1200- Surface Vertical Rod Exit Device ED1200F - Surface Vertical Rod Fire Exit Device 203R 205R 308R 314R HEAVY DUTY GRADE 1 RIM AND SURFACE VERTICAL ROD EXIT DEVICES ED1100/1100F- Rim Exit Devices Certified to ANSI A156.3-2008 Grade 1 UL - ED1100F UL Listed 3 hour fire, conforms to UL10C and UBC7-2 - ED1100 UL listed for UL305 Designed for new or retrofit installation into major domestic brands For 1 3/4" to 2 1/4" door thickness with up to 4' wide opening Stainless steel dead locking latch bolt 3/4" throw Dogging - Allen key provided (not for use on fire doors) Device non-handed, except for double cylinder option, trim field reversible Available finish: US32D ED1200/1200F - Surface Vertical Rod Exit Device Certified to ANSI A156.3-2008 Grade 1 UL - ED1200F UL listed for 3 hour fire, conforms to UL10C and UBC7-2 - ED1200 UL Listed for UL305 For 1 3/4" to 2 1/4" door thickness with up to 4" wide opening 1/2" square tubing, standard rods accommodate 7' door Stainless Steel Pullman type deadlocking top and bottom latch bolt, 5/8" throw. Round slide bolt for fire rated device Dogging - Allen key provided (not for use on fire doors) Device non-handed, except for double cylinder option, trim field reversible Less Bottom Rod optional Available finish: US32D page 8
Heavy Duty Grade 2 Exit Device TS5000- Rim Exit Device TS8000- Fire Rim Exit Device TS 5100 - Surface Vertical Rod Exit Device TS 8100 - Surface Vertical Rod Fire Exit Device TL8000 Series Trim HEAVY DUTY GRADE 2 RIM AND SURFACE VERTICAL ROD EXIT DEVICES TS5000/TS8000 - Rim Exit Device UL - TS5000 UL listed for Panic Exit Hardware - TS8000 UL listed for Fire Exit Hardware Doors - 1 3/4" standard thickness, usable on doors 1 3/8" to 2" thick, door width from 30" to 48" Hardware furnished for metal and wood door mounting Latch bolt - Stainless steel with 3/4" throw Dead locking latch bolt - 5 /8" Stainless steel Non-handed with reversible trim Device Length - 3' Dogging - Allen key provided (not for use on fire doors) Available finishes: US32D & Aluminum TS5100/TS8100 - Surface Vertical Rod Exit Device Conforms to ANSI A156.3 Grade 2 UL - TS 5100 UL Listed for Panic Exit Hardware - TS 8100 UL Listed for Fire Exit Hardware Doors - 1 3/4" thick standard, usable on 1 3/8" to 2 thick doors, door width from 30" to 48" Hardware furnished for metal and wood door mounting Latch bolt - Stainless steel with 3/4" throw Dead locking latch bolt - 5/8" Stainless steel Non-handed with reversible trim Device Length - 3 Dogging - Allen key provided (not for use on fire doors) Available finishes: US32D & Aluminum page 9
Flushbolts TFBA291-M TFB197SB TFBA291-W TFB297W FIRE DOOR FLUSHBOLTS TFBA291 Series - Automatic Flushbolts TFBA291-M for hollow metal door, with 1" vertical adjustment, 12" rod to fit standard ANSI preparation TFBA291-W for wood door, with 7/8" vertical adjustment Automatic 3/4" throw Spring override in case of misalignment Steel body with stainless steel components UL listed up to 3 hours on hollow metal and steel covered composite doors up to 8 feet high Available finish - US32D TFB197SB/TFB297W - Manual Flushbolts TFB197SB - for hollow metal door, 7/8" throw with 7/8" vertical adjustment, 12" rod to fit standard ANSI preparation TFB297W - for wood door, 5/8" throw with 7/8" vertical adjustment Spring loaded lever to project or retract bolt Forged brass UL listed Available finish - US26D page 10
Hinges TH179 THBB168 THSP179 THBB179 STANDARD AND HEAVY DUTY COMMERCIAL HINGES TH179 - Plain Bearing Hinge, five knuckle non-rising removable pin, full mortise, available sizes - 4.5"x4", 4.5"x4.5", 5"x4.5", available finish - US26D, provided with wood and machine screws, steel with steel pin. THBB179 - Two Ball Bearing Hinge, five knuckle, non-rising removable pin, full mortise, available size - 4.5"x4", 4.5"x4.5", 5"x4.5", available finishes-us26d,-us32d, provided with wood and machine screws, steel or stainless steel, specified as THBB179SS for stainless steel, Non-Removable-Pin feature available. THBB168 - Four Ball Bearing Hinge, five knuckle, non-rising removable pin, full mortise, available size - 4.5"x4", 4.5"x4.5", 5"x4.5", available finishes -US26D, -US32D, provided with wood and machine screws, steel or stainless steel, specified as THBB168SS for stainless steel, Non-Removable-Pin feature available. THSP179 - UL listed Spring Hinge, full mortise, adjustable spring tension, available size - 4.5"x4.5", available finish - US26D, provided with wood and machine screws, steel. page 11
Door Viewers TDV3315 (For Door Thickness 1-3/8"-2-1/4") TDV 3316 (For Door Thickness 1"-1-7/8") FIRE DOOR VIEWERS TDV3315 200 Degree Viewing Area. For Door Thickness 1-3/8" - 2-1/4". Polished Glass Lens. UL Listed, for use with Classified fire doors rated up to and including 1-1/2 hour All Viewers Solid Cast Brass. TDV3316 200 Degree Viewing Area. For Door Thickness 1"-1-7/8". Polished Glass Lens. UL Listed, for use with Classified fire doors rated up to and including 1-1/2 hour All Viewers Solid Cast Brass. page 12
General Hardware TCOR-52, TCOR-60 TDG128BR TSPP4016R GENERAL HARDWARE TCOR-52 UL ULC listed surface mounted coordinator, 52" long housing for door range 54-96". Available finish - aluminum TCOR-60 UL ULC listed surface mounted coordinator, 60" long housing for door range 97-112". Available finish- aluminum TSPP4016R - 4"x16" plate with round pull, 2-1/8" projection, 16 gauge stainless steel, for 1-3/4" door thickness, furnished with SST Phillips sheet metal screws. TDG128BR - Solid Brass Safety Lock Door Guard, Positive projection lock ball not allowing forced entry, maximum 4" door opening when engaged, cannot be disengaged unless door is fully closed. US26D. page 13
General Hardware TSH438 TSH436 TFL001 TSH406 TSH401 TH502 TDPS280 IC Housing IC Core S8239 S8234 S8233 S8333 GENERAL HARDWARE TSH436-3/16" Rise X 1-3/16" Low Dome Floor Stop. US26D. TSH438-1/2" Rise X 1-7/16" High Dome Floor Stop. US26D. TSH401-2-1/2" x 1" Concave Wall Stop. US32D. TSH406-2-1/2" x 1" Convex Wall Stop. US32D. TFL001 - UL Listed auxiliary fire latch, temperature actuated TH502 - Heavy Duty Roller Catch, Adjustable Spring Tension. US26D. TDPS280 - Dust Proof Strike, 3"X 1 1/2" faceplate, 2-1/4" overall Depth. US26D. IC Housing - Small Format, accommodates 6 or 7pin cylinder, Solid Brass Construction IC Core - Small Format, 6 or 7pin, Solid Brass Construction S8239, S8234, S8233, S8333 - Mortise Cylinder Collar, Solid Brass or Stainless Steel page 14
TownSteel Architectural Hardware MFG 707 N. Barranca Ave., Bldg #6 Covina, CA 91723 Toll Free: 877-858-0888 Tel: 626-858-5080 Fax: 626-858-3393 Web: www.townsteel.com Email: sales@townsteel.com