Sterling Saw Blades The solution to ALL your saw blade needs! Manufactured in the USA by: Diamond Saw Works, Inc Band Saw Blades Reciprocating Saw Blades Jig Saw Blades Power Hacksaw Blades Hand Hacksaw Blades Hole Saws Circular Saw Blades Imported Band Saw Accessories An Employee Owned and Operated Company
TABLE OF CONTENTS NXT-ct Bandsaw Blades Blue Diamond, Mach Bandsaw Blades Excel, Contour Band Bandsaw Blades 5 Cut Master, Kerf Plus, New Wave Bandsaw Blades Super Weld MX Bandsaw Blades, Portable Bands 7 Tri-Temp, Carbon Bandsaw Blades 8 Friction, X-tra Duty 0, ETS Bandsaw Blades 9 Knife Edge Bandsaw Blades Timber Master TK Collection Pallet Reclaim Collection, Bandsaw Accessories Reciprocating Blades - Blue Diamond, Slik-Kote, Glas-Fab Collections 5 Carbide Grit Collection, Jig Saw Blades Jig Saw Blades 7 Big Blue Displays, Air Saw Blades 8 Circular Saw Blades-IMPORTED 9 Porta-Hack, Power Hacksaw Blades 0 Hand Hacksaw Blades, Hacksaw Frames, PVC/ABS Blades Hole Saws (Bi-Metal, Carbide Tip and Blue Diamond ) Hole Saw Kits and Accessories BAND SAW BLADE ORDERING INSTRUCTIONS When ordering band saw blades and coil stock, please include the following information: Quantity Item Number Coil or Blade Length (feet + inches) Blade Width NOTE: Timber Master TK, Pallet Reclaim and Bi-Metal bandsaw widths and above are over-width Blade Thickness Teeth Per Inch / Grit (Raker, Wavy, ETS) Style (Skip, Hook, Constant, Broach and Posi Tooth) Blade Type (specific brand name) GUARANTEED TRIAL ORDER PROGRAM Diamond Saw Works offers a Guaranteed Trial Order Program on all Sterling band saw blade products Upon review and approval of consumer applications we will provide a product on a paid trial basis The purpose of this program is to allow all consumers the opportunity to try our products risk-free Contact your local Sterling representative with your application information so we may provide you with the right blade that will meet your performance expectations CATALOG NO PC9 AUGUST 0
BAND SAW BLADES APPLICATION: Triple chip pattern for difficult machining materials such as inconel, hasteloy, titanium, nickel alloys, stainless steel, chrome alloys, tool steels and specialty steels tooth for aluminum castings and foundry applications CARBIDE TIPPED Introducing our two newest grind styles; Negative and Special, as well as our new tooth configuration / available in -/ thru -5/8 widths NEWEST GRADE OF CARBIDE - For higher cutting speed, longer blade life and high heat and abrasion resistance UNIQUE, GROUND TOOTH FORM - Improves cutting accuracy and offers a higher quality, smoother finish IMPROVED, TEMPERED STEEL BACKER - Offers greater beam strength and extended blade fatigue life / / 05 9 9059 900 9075 907 TRIPLE CHIP / 05 / 0 05 0 9 9 07 07 Hvy 9080 Triple Chip 9085 Negative 9095 909 95 9 Triple Chip 98 -/ 0 -/ 050 07 7/ / / 7/ / / / Negative Negative 9 9 9 9 9 98 9 9 9 9 97 SET TOOTH 0 5 0 7/ / / / Special 97 975 97 980 985-5/8 0 7 0 7/ / / 9 95 9 0 7 0 Available in coils and welded to length /8 Triple Chip 9
BAND SAW BLADES BLUE DIAMOND Diamond edge bands will provide high cutting rates with minimal material loss Finish quality can help eliminate expensive secondary operations Carbon, graphite, glass, quartz, silicon, fiberglass, ceramics and composites as well as stone, granite and marble are among the many materials that can be cut effectively using diamond edge bands Available in 5/5, 5/0, 0/50, 0/80, 80/0 blended grit sizes MM MM / 00 50 CONTINUOUS 900 05 SEGMENTED 9055 / 00 50 SEGMENTED 905 05 P GULLETED 900 / P GULLETED 90 00 0 CONTINUOUS 905 / 00 9 50 CONTINUOUS 905 00 0 SEGMENTED 9070 / 00 9 50 SEGMENTED 900 -/ CONTINUOUS 9075 / 0 9 80 P GULLETED 905 -/ SEGMENTED 9080 00 50 CONTINUOUS 900 -/ 00 0 CONTINUOUS 9085 00 50 SEGMENTED 905 -/ 00 0 SEGMENTED 9090 CONTINUOUS 900 -/ 0 07 P GULLETED 9095 SEGMENTED 905 -/ 00 0 CONTINUOUS 9000 05 CONTINUOUS 9050 -/ 00 0 SEGMENTED 9005 Available in welded to length only Available in welded to length only MACH BI-METAL M5 MACH band saw blades have a % cobalt M5 tool steel cutting edge with a (9-70 Rc) hardness that provides excellent heat and abrasion resistance with a high chrome tempered steel backing for maximum tool life The aggressive degree positive rake varied pitch tooth design penetrates hard materials providing faster cutting rates MACH is an excellent choice for cost effective production cutting of solid or heavy walled exotic materials that have work hardening or abrasive characteristics such as; Inconel, hasteloy, titanium, nickel alloys, chrome-moly, stainless steels and tool & die steels -/ 0 07 / / 9 98 90 -/ 050 / / 98 9 95 0 5 0 / 95 9558 Available in coils and welded to length
BAND SAW BLADES EXCEL BI-METAL M EXCEL TM bi-metal band saw blades feature a high tooth hardness (8-9 Rc) with an 8% cobalt M tool steel cutting edge They are available in Broach, Posi and Hook tooth styles The Broach tooth has a less aggressive zero degree rake angle that resists tooth strippage especially on smaller cross sections while retaining the high hardness and superior abrasion resistance needed for cutting high alloy, heat treated, or stainless steels The Posi and Hook tooth styles combine the high hardness and superior abrasion resistance qualities with an aggressive rake angle and a strong back angle to provide faster cuts on solid work pieces where tooth strippage is not a coon occurrence CONTOUR BAND BI-METAL M Introducing our newest tooth configuration; / available in -/ 050, 0 and -5/8 0, as well as many other new tooth selections in varying widths CONTOUR BAND TM bi-metal saw blades feature a high hardness (8-9 Rc) with an 8% cobalt M edge They are available in narrow widths with Hook, Constant and Broach tooth styles for radius and straight cutting The Hook tooth style combines an aggressive rake angle for faster cuts and is an excellent choice for aluminum and nonferrous materials The Constant and Broach tooth have less aggressive zero degree rake angles that resist tooth strippage especially on smaller work pieces while retaining the high hardness and superior abrasion resistance needed for cutting high alloy, heat treated, or stainless steels / 05 05 -/ 0 9 07 / / /8 / / / / / / / 9500 9500 9500 95007 95008 9997 950 950 9507 9505 950 9500 9505 95 9508 9505 9507 9500 9505 / / 05 /8 /8 05 / 0 95 0 95 0 / 8/ / / /8 / 8/ 90 905 907 9005 90 908 90 90 900 90 90 90 90 90 907 90 90 -/ 050 050 0-5/8 0 5 5 0 8 0 5/ / / / / / 5/ / / / /8 5/ / / / 950 9505 9505 95055 95057 9500 950 959 950 9508 9509 950 9508 95085 95087 95088 95089 95090 9509 95098 95097 95099 95 95095 / 05 / / Available in coils and welded to length 907 908 9055 900 907 0 7 0 /8 Available in coils and welded to length 950 5
BAND SAW BLADES CUT MASTER BI-METAL M The new tooth design of this high hardness M- blade is ideally suited for cutting larger structural shapes such as I-beam, angle and thick wall tubing A modified progressive close tolerance set pattern provides smoother finishes than a standard raker set The tooth profile delivers aggressive cutting performance while resisting tooth strippage KERF PLUS BI-METAL M Introducing our newest tooth configuration; Face Angle as well as the addition of a -5/8 width KERF PLUS is a high hardness M blade for cutting structural materials that tend to close into the cut The wider kerf also helps prevent blade damage due to binding while cutting stacked or bundled structural beams and tubing Recoended for use by production cutting houses and steel fabricators 05 / 957 9575 05 / 9005 -/ 0 07 / 9570 9575 -/ 0 07 / 900 90 -/ 050 / 9570 9575 -/ 050 / 900 90 0 5 0 Available in coils and welded to length NEW WAVE BI-METAL 9570 0-5/8 0 5 0 7 0 / / Face Angle Available in coils and welded to length 900 90 90 9050 905 NEW WAVE band saw blades are specifically tailored for maintenance department saws, fabricators of lighter structurals, round and square tubing and other applications that can prove troublesome to saw blade users everywhere The unique, group tooth set, combined with the Broach tooth design, delivers smoother cuts with less noise and vibration Because teeth are group set in varying degrees, each tooth protects adjacent teeth from taking too much stress load This helps prevent tooth loss due to chipping and eventual strippage NEW WAVE blades feature an 8% cobalt edge with -8 RC tooth hardness For use on horizontal or vertical band saw machines / /8 / 00 95 50 / 8/ 8/ WAV Y 8/ WAV Y 90 908 90 905 05 -/ 0 07 / /8 / / /8 9 9 9 98 98 9 9 / / 8/ 909 905 -/ 050 WAV Y 95 / 05 9 / /8 / 8/ 9 98 9 9 9 050 0 5 5 0 WAV Y WAV Y 955 90 Available in coils and welded to length Available in coils and welded to length
BAND SAW BLADES SUPER WELD MX BI-METAL MATRIX II This newest matrix product may be utilized as a Timber Master TK B as well SUPER WELD MX TM saw blades feature a tough 8% cobalt matrix tool steel edge with a (5-7 Rc) tooth hardness They are available in Constant, Broach, Hook and Posi tooth styles and are an excellent choice for all coon metal cutting applications The Constant and Broach tooth styles have less aggressive zero rake angles that resist tooth strippage especially on smaller work pieces The Hook and Posi tooth styles combine an aggressive rake angle for faster cuts and are excellent choices for solid work pieces and larger cross sections of materials / 00 50 8 / 8/ 900 905 900 909 908 90 5/8 0 80 / / 907 907 / 05 9 / / /8 / 8/ 9075 9090 9095 9 9 95 90 9 9 05 -/ 0 07 / / /8 / / / / Available in coils and welded to length 950 9 9 90 95 97 905 95 9 9 9 90 BLADES FOR PORTABLE BAND SAW MACHINES Blades for portable band saw machines are made of 8% cobalt matrix II bi-metal blade material, providing excellent life in tough cutting applications Length x Thickness '8-7/8" / 00 50 8 / 8/ 8/ Packaged 5 per box or 0 bulk S et 900 90 90 907 908 90 905 7
BAND SAW BLADES TRI-TEMP HARD EDGE, HARD BACK Tri-Temp blades are manufactured from high carbon alloy steel Through a special heat treating process, a spring tempered hardness is given to the back of the blade This quality allows the blade to be given more tension for added rigidity, resulting in straighter cuts and accuracy in contour cutting Its greater tensile strength allows heavier feeds and provides longer blade life for production cutting Tri-Temp is not recoended to be run at speeds over,000 feet per minute For added versatility and performance, we recoend the original varied pitch Broach and Posi Tooth blades CARBON HARD EDGE, FLEX BACK Introducing a new heavy set / hook tooth A hard edge, flexible back blade for horizontal cut-off machines, and contour and straight cutting on vertical band saw machines Its economical cost makes it a good choice for cutting easy to machine metals, wood, plastics and other materials that do not require high production blades Carbon is a light duty production blade that is well suited for machines with small wheel diameters / 8 SKIP 9 95 90 / /8 / / 0 05 95 9 80 5 / 8 / / 8 / /8 / / / /8 Available in 50 coils and welded to length SKIP SKIP 900 9070 9085 9095 9090 90 970 980 985 990 900 905 9 95 95 95 995 900 9 90 950 955 90 9 90 90 95 / /8 / 5/8 0 / 0 05 95 80 9 80 5 8 8 8 SKIP SKIP SKIP 95 950 95 955 95 970 975 995 9 95 95 95 90 980 995 990 99 900 905 9 90 90 95 90 985 995 900 9 90 95 90 95 955 985 995 95 -/ 0 Heavy 8 8 07 9 Available in 50 coils and welded to length
BAND SAW BLADES FRICTION FOR FRICTION CUTTING ONLY A special silicon carbon steel with good abrasion resistance and fatigue life is used for the manufacture of friction cutting blades Friction cutting is accomplished by running the band saw blade at high speed (8,000-5,000 sfpm) The high frictional heat created allows the blade to burn or melt away the material and the saw teeth remove the molten metal from the work piece Very thin or odd-shaped metals may be successfully cut by friction sawing when conventional methods fail X-TRA DUTY 0 HARD EDGE, FLEX BACK Heavy duty for wood, metal and the furniture industries A hard edge, flexible back blade with extra thickness (0) for extra rigidity, strength and blade life Widely used by the woodworking industries, especially furniture manufacturers Also used on aluminum, magnesium, brass, etc X-tra Duty 0 is manufactured with a Hook tooth design and is available in /, /8" and / widths Not recoended for machines that take a 5 band or less / 0 80 97000 9700 / 0 80 9000 05 5 8 Available in 50 coils and welded to length 9709 970 /8 0 95 80 ETS ETS 9008 90 90 905 / 0 80 ETS ETS Available in 50 coils and welded to length 909 900 905 EVERY TOOTH SET (ETS) HARD EDGE, FLEX BACK Highly recoended for straight and contour cutting of wood, flake board, plastic, nonferrous materials, etc Absence of raker teeth gives a third more cutting edges for additional blade life and abrasion resistance / ETS 97995 /8 95 ETS ETS 98000 9800 / ETS 98009 / 0 9 80 ETS Available in 50 coils and welded to length 980 9
BAND SAW BLADES KNIFE EDGE Many other sizes are available, please contact us for availability and pricing Spring tempered carbon steel Knife Edge bands are produced for cutting soft and fibrous materials that would fray or tear if cut with a conventional tooth type band The Knife Edge produces little downward drag so there is no tearing during the cut, producing an excellent finish These blades are run at speeds of 000-8000 sfpm depending on the material being cut Sterling Knife Edge blades are double beveled and available in several styles for a variety of applications STRAIGHT KNIFE (SINGLE EDGE) For slicing foam, food, plastics, rubber, fabric, sponges and fiberglass insulation W idth & Thickness /8" x 00 950 /8" x 950 /" x 00 950 /" x 0 9508 /" x 00 950 " x 00 950 " x 0 950 -/" x 00 9508 Available in 50 coils and welded to length V TOOTHED KNIFE (SINGLE EDGE) For cutting foam, food, plastics, rubber, fabric, sponges, fiberglass insulation and filter material W idth & Thickness T PI /" x 00 9500 /" x 0 9500 5/8" x 0 95008 /" x 00 950 /" x 00 950 /" x 0 950 " x 00 950 " x 00 9505 Available in 50 coils and welded to length SCALLOPED (SINGLE EDGE) For slicing woven fabric, felt, filter material, fiberglass insulation, fish filleting and hosing material W idth & Thickness /8" x 00 95000 /" x 00 9500 /" x 0 9500 5/8" x 0 9500 /" x 00 95008 /" x 0 950 " x 00 950 " x 0 950 Available in 50 coils and welded to length There is a 5 band minimum per specification Knife Edge products ship from Southgate, CA V TOOTHED KNIFE (DOUBLE EDGE) For bi-directional cutting foam, plastics, rubber, fabric, plastic film, food and filter material W idth & Thickness T PI /" x 00 950505 5/8" x 0 950509 /" x 00 9505 " x 00 9505 " x 00 95055 Available in 50 coils and welded to length OUR FACTORY SERVICE TEAM MAY BE CONTACTED FOR BLADE SELECTION ASSISTANCE AT: Phone: 800-88-80 Fax: 800--885 Email: sales@diamondsawcom or visit us on the WEB: wwwdiamondsawcom wwwsterlingsawbladescom
TIMBER MASTER TK COLLECTION The TIMBER MASTER TK band saw blade collection covers a wide range of wood cutting applications All blades are made of overwidth stock, which gives higher beam strength for fast, true cuts All blades are factory set and delivered ready-to-run out of the box Any TIMBER MASTER TK blade can be resharpened for extended life and optimal cost effectiveness TIMBER MASTER TK CT Carbide Tipped This is the ultimate cutting tool for resawing hard and abrasive wood species The precision ground cutting surfaces provide fast, smooth cuts As in all mill type operations, for optimum life, care must be taken to be sure the wood is free from metal contaminants, such as nails, fence wire, bullets, etc TIMBER MASTER TK B M Bi-Metal This is an excellent heavy duty blade for production wood cutting A hardness of 8-9 Rc on the tooth edge provides long blade life, especially for cutting abrasive, exotic wood species As in all mill type operations, for optimum life, care must be taken to be sure the wood is free from metal contaminants, such as nails, fence wire, bullets, etc -/ 050 0 5 0 7/ TRIPLE CHIP 9 7/ TRIPLE CHIP 97 Available in coils and welded to length -/ 0 -/ 050 050 07 5 95 950 959 0 5 0 Available in coils and welded to length 950 05 0 -/ 0 Introducing TIMBER MASTER TK Pro Cut Ready to Run out of the box 07 07 Toot h Spacing /" /" 7/8" /" " 7/8" 7/8" /" 9 9 9 9 9 98 99 9 The TIMBER MASTER TK Pro Cut series products are manufactured with a unique hardening process providing you with a full tooth hardness for extended wear life as well as providing a backer with excellent flex life for multiple resharpenings The Timber Master TK Pro Cut series is designed for band mill and re-saw applications These blades are pre-sharpened at the factory for performance right out of the box for extended life and optimal cost effectiveness -/ 050 " 7/8" 7/8" 95 9 99 050 5 " 7/8" Heavy Duty Available in 50 coils and welded to length 9 9
PALLET RECLAIM COLLECTION The Sterling Pallet Reclaim Collection includes saw blades designed for pallet dismantling saws The collection includes bimetal and carbon blades for band saws and specifically designed safety tip bi-metal blades for reciprocating saws The modified wave set pattern reduces the amount of force necessary to cut through the pallet Reduced force prolongs blade life, reduces operator fatigue leading to increased pallet processing productivity PALLET RECLAIM B Bi-Metal PALLET RECLAIM C Carbon -/ 0 07 / 9 9 -/ 0 07 9 950 Available in coils and welded to length Available in 50 coils and welded to length SAFETY TIP Bi-Metal Reciprocating Blade 90-50 8 x / x 05 00 x 0 x 8 9-50 8 x / x 05 00 x 0 x Packaged 50 per box BAND SAW ACCESSORIES Super Sterling Heavy Duty Oil-Free Synthetic Sawing Fluid Coolant ships from Hilton, NY Super Sterling is a State-of-the-Art heavy duty oil-free coolant designed to replace soluble oil in production sawing of all metals except magnesium This product is excellent on aluminum The coolant contains a remarkable package of EP additives and corrosion inhibitors which offer outstanding performance without the mess and disposal concerns of soluble oil coolants Super Sterling works on all sawing applications including cutoff, band, power hacksaw, reciprocating, etc This product may be used on ferrous and nonferrous metals It is available in a variety of packaging options 5 Gallon Container (-Gallon) Containers 55 Gallon Drum 800 805 807 Sterling Mist Unit 8 For use with Super Sterling oil free synthetic sawing fluid Unit requires 50 to 0 PSI air supply and delivers up to one gallon per minute (Instructions and replacement parts list included) Tachometer 0 Photo/contact digital tachometer for measuring RPM and bandsaw blade speed surface feet per minute Maximum contact speed is 50 sfpm (Instructions included) Tension Meter 00 For use on band saw blades and/or power hack saw blades The tension meter checks for proper blade tension ensuring straighter cutting and longer blade life The dial indicator provides you with a direct readout in PSI (Instructions included) Refractometer 07 This industrial refractometer with case and instructions has a 0-8 Brix analog scale to determine the concentration of Super Sterling and other industrial fluids (Instructions included) Magnetic Guide Alignment Tool 0 The blade alignment tool is used to check and adjust the blade orientation to the saw table assuring improved cutting accuracy (Instructions included)
RECIPROCATING SAW BLADES UNIVERSAL / SHANK Four new Heavy Duty sizes available Tough, shatterproof bi-metal reciprocating blades fit all popular machines and outperform standard blades by a wide margin The teeth retain their hardness and stay sharper longer Breakage is eliminated because of its bi-metal construction Select from over 0 different blades to match your cutting applications in wood, metal, fiberglass, nail-embedded wood, stainless and composition For extra long life in stainless steel, fiberglass or other tough or abrasive applications, use SLIK-KOTE blades located on pg 5 METAL CUTTING Recoended Uses 0 08 " x /" x 05 8" x /" x 05 50 x 0 x 00 x 0 x For metal decking and roofing, and nonferrous metals 00 " x /" x 050 50 x 0 x 00 080 00 000 0080 " x /" x 05 8" x /" x 05 " x /" x 05 " x " x 050 8" x /" x 050 50 x 0 x 00 x 0 x 00 x 0 x 50 x 0 x 00 x 0 x / / / / / For cutting soil pipe, heavy gauge metal and nail - embedded wood Heavy gauge metals, compositions, masonite, wood, etc For cutting soil pipe and heavy gauge metal 0 0 08 " x /" x 05 " x /" x 05 8" x /" x 05 0 x 0 x 50 x 0 x 00 x 0 x For metals heavier than /8, bar stock, angles, etc rubber, masonite, fiberglass, etc 00 " x /" x 050 50 x 0 x For pipe, angle iron and heavy gauge metal over /8" 08 08 088 " x /" x 05 " x /" x 05 8" x /" x 05 0 x 0 x 50 x 0 x 00 x 0 x 8 8 8 Also For heavy gauge sheet metal, conduit, pipe, tubing, thin fiberglass, etc 008 " x /" x 050 50 x 0 x 8 For conduit, angle iron and heavy gauge metal up to /8" 98 " x /" x 05 50 x 0 x 8/ Graduated teeth for fast cuts in metals heavier than /, bar stock, angles, pipe Also fiberglass, fiber, Transite 0 0 " x /" x 05 " x /" x 05 0 x 0 x 50 x 0 x For metals lighter than 8-gauge, thin wall tubing, formed sheet, trim, etc 0 " x /" x 05 0 x 0 x For very thin gauge metals, sheet, tubing, trim, etc Packaged 5 per vinyl pouch or 50 per box METAL SCROLL CUTTING Recoended Uses -5/8" x 5/" x 05 9 x 8 x For scroll cutting heavy gauge metal, fiberglass, masonite 08 " x /" x 05 75 x x 8 For scroll cutting metals lighter than gauge Packaged 5 per vinyl pouch or 50 per box
RECIPROCATING SAW BLADES UNIVERSAL / SHANK RUFF-NECK DEMOLITION BLADES Recoended Uses 85 985 85 " x " x 0 9" x " x 0 " x " x 0 50 x 5 x 5 x 5 x 00 x 5 x For demolition work, remodeling, wood, wallboard, paneling, plaster, nail-embedded wood 90 " x " x 0 00 x 5 x Fastest cutting, roughing-in work in wood 70 90 " x " x 0 9" x " x 0 50 x 5 x 5 x 5 x /8 /8 Wavy set for nail-embedded wood, metal lath, thin steel plate and metal demolition work Packaged per vinyl pouch or 50 per box FIRE & RESCUE TPI Recoended Uses 09 8" x /" x 050 00 x 0 x / 9 9" x x 0 5 x 5 x / 8 Packaged per vinyl pouch or 50 per box For fire and rescue work WOOD & PLASTER CUTTING Recoended Uses 500 " x TAPER x 050 50 x TAPER x 50 " x /" x 05 50 x 0 x Fast cutting, positive rake design with wide gullet spacing for roughing-in For wood and nail-embedded woods, all composition material Also nonferrous metals 500 590 5 " x TAPER x 050 9" x TAPER x 050 " x TAPER x 050 50 x TAPER x 5 x TAPER x 00 x TAPER x General roughing-in work in wood and nail- embedded woods Fast cutting 5 " x TAPER x 050 00 x TAPER x For thinner sections of wood, plastics, metals /8 and under, where extra blade length is required PLASTER CUTTING - For smooth, fast cuts in 505 5" x /" x 05 0 x 0 x V-Too th plaster, plasterboard and metal lath plaster Packaged 5 per vinyl pouch or 50 per box Big Blue display boards available
BLUE DIAMOND COLLECTION UNIV /, T STYLE JIG SAWS AND RECIPROCATING SHANK STYLES SLIK-KOTE COLLECTION A special treatment and coating results in a hard, abrasion resistant surface that increases the cutting life of the blade ALL JIG SAW AND RECIPROCATING SHANK STYLES Shank Style Shank Style Grit 00 AIR SAW 5" x /" x x x 0 0/50 800 /" UNIV -/" x / x 0 89 x x 0/50 8700 ' T' STYL E " x 5/" x 0 0 x 8 x 0/50 700 RECIP " x /" x 05 50 x 0 x 0/50 Packaged per vinyl pouch Recoended Uses Diamond edged air, jig, and reciprocating saw blades are for use on various composites and hard friable materials such as quartz, glass, fiberglass, carbon graphite and ceramics Recoended Uses 800 80 UNIV /" -/" x 5/" x 0 89 x 8 x 808 BAYONE T " x /8" x 05 75 x x 88 889 79 8 70 'T' STYLE RECIP " x 5/ x 0 " x 5/ x 0 " TAPER x 050 9" TAPER x 050 " x /" x 05 " x /" x 05 0 x 8 x 75 x 8 x 50 x 0 x 5 x 0 x 50 x 0 x 50 x 0 x Universal, Bayonet and T Style blades are packaged 5 per vinyl pouch or 0 per box Reciprocating blades are packaged 5 per vinyl pouch or 50 per box PNUE-SAW 8 Recoended for fiberglass and other abrasive applications Also effective on metals including stainless steel Recoended Uses 8-5/8" x /" x 9 x x 8 For scroll cuts in heavy metal, composites, fiberglass, plastics -5/8" x /" x 9 x x For scroll cutting heavy gauge metal, fiberglass -5/8" x /" x 9 x x For scroll cutting metals lighter than gauge Packaged 5 per vinyl pouch or 0 per box GLAS-FAB COLLECTION ALL JIG SAW SHANK STYLES Shank Style Recoended Uses 80 UNIV /" -/" x 5/" x 050 89 x 8 x -WAY 800 BAYONE T " x /8" x 050 75 x x -WAY 8707 " T" STYL E " x 5/" x 050 0 x 8 x -WAY Packaged 5 per vinyl pouch or 0 per box 5 For smooth splinter free cuts in fiberglass, wood, plexiglass Hard surface coating adds blade life in abrasive materials
CARBIDE GRIT COLLECTION ALL JIG SAW AND RECIPROCATING SHANK STYLES Shank Style Grit Recoended Uses 00 000 0 0 500 5800 UNIV /" UNIV /" "T" STYLE "T" STYLE RECIP -7/8" x 5/" x 0-7/8" x 5/" x 0 " x 5/" x 0 " x 5/" x 0 " x /" x 00 8" x /" x 00 7 x 8 x 80 7 x 8 x 80 75 x 8 x 80 75 x 8 x 80 0 x 0 x 0 00 x 0 x 0 MEDIUM COARSE MEDIUM COARSE COARSE Enhanced cutting capability and increased blade life in hard abrasive materials such as ceramic tile, fiberglass and slate The narrow width of the jig saw blades allow for both straight and contour cutting Packaged 5 per vinyl pouch JIG SAW BLADES UNIVERSAL T STYLE Durable, high performance bi-metal jig/sabre saw blades outlast all other types of carbon and high speed steel blades These shatterproof wood and metal cutting blades are available in three coon shank designs: T-Style, ¼ Universal and Bayonet types For extra long life in stainless steel, fiberglass or other tough or abrasive applications, our Slik-Kote treated blades are recoended METAL CUTTING Recoended Uses 80 " x 5/" x 0 0 x 8 x 8 8 " x 5/" x 0 75 x 8 x 8 " x 5/" x 0 75 x 8 x 8 Mild steel / - /8 Nonferrous / - 5/8, laminates and plastics 5/ width for tight contours in metal, wood, etc Mild steel /8 - / Nonferrous /8-5/8, laminates and plastics 5/ width for tighter contours in metal, wood, etc Mild steel up to /" Nonferrous up to /" and laminates 5/" width for tighter contours in metal, wood, etc 8 " x 5/" x 0 75 x 8 x Thin wall tubing and metal under /8" Packaged 5 per vinyl pouch or 0 per box WOOD CUTTING Recoended Uses 8707 " x 5/" x 0 0 x 8 x 8707 " x 5/" x 050 0 x 8 x 8707 " x 5/" x 050 0 x 8 x Fast cuts in hard and soft woods up to -/8 5/ width for tighter contours in wood, metal, etc For smooth cuts in hard and soft wood, plywood up to -/, also plastics 5/ width for tighter contours in wood, metal etc Hollow Ground For smooth cuts in hard and soft wood, plywood up to -/, also plastics 5/ width for tighter contours in wood, metal etc Hollow Ground 87077 " x 5/" x 050 0 x 8 x Packaged 5 per vinyl pouch or 0 per box Down Cut Reversed tooth direction for down cutting Reduces top splintering and chipping Hollow Ground Big Blue display boards are available
JIG SAW BLADES UNIVERSAL / STYLE METAL CUTTING Recoended Uses 8050 -/" x 5/" x 0 89 x 8 x / -/ steel, / -/ nonferrous, plastic,etc 805 -/" x 5/" x 0 79 x 8 x /8"-/" steel, /8"-/"nonferrous, aluminum, fiberglass, plastics, etc 805 -/" x 5/" x 0 79 x 8 x 8 / -/8 steel, conduit, plastics, tubing, etc 805 -/" x 5/" x 0 79 x 8 x / steel and under, thin wall tubing, formica, etc Packaged 5 per vinyl pouch or 0 per box WOOD CUTTING TPI Recoended Uses 80 -/" x /" x 05 89 x x 80 -/" x /" x 05 89 x x Positive rake for roughing-in and scroll cuts up to / in wood, plywood, hardboard, plastics, etc Smoother finish and scroll cuts in wood, plywood, hardwood, plastics, laminates up to / 8008 " x /8" x 05 0 x x Long life in wood cutting, laminates, composites 80 " x /8" x 05 0 x x Packaged 5 per vinyl pouch or 0 per box JIG SAW BLADES METAL CUTTING BAYONET STYLE Fine set teeth for finish cuts in wood, plywood, plastics, masonite, brass, aluminum Recoended Uses 80 " x /8" x 05 75 x x /8 -/ Steel; /8 -/ nonferrous and laminates 80 " x /8" x 05 75 x x 8 / -/8 steel, conduit, plastics, tubing, etc 80 " x /8" x 05 75 x x Thin sheet steel, thin wall tubing and thin nonferrous 80 -/" x /" x 05 5 x x 805 -/" x /" x 05 5 x x Packaged 5 per vinyl pouch or 0 per box WOOD CUTTING /8 -/ steel, /8 -/8" nonferrous, suitable for scroll work Thin sheet work steel, thin wall tubing, suitable for scroll Recoended Uses 8009 " x /8" x 050 75 x x 8009 " x /8" x 050 75 x x Packaged 5 per vinyl pouch or 0 per box 7 Faster cutting, set tooth, for roughing-in wood, plastics, compositions Fast cutting, set tooth for wood, compositions, nonferrous metals-medium smooth finish
Introducing BIG BLUE DISPLAY KITS 5700 D escription TPI Qty Blades 570 D escription TPI Qty Blades 98 0 0 08 0 8 70 800 80 88 889 00 " x /" x 05 " x /" x 05 " x /" x 05 " x /" x 05 " x /" x 05 " x /" x 05 " x /" x 05 -/" x 5/" x 0 -/" x 5/" x 0 " x 5/" x 0 " x 5/" x 0 Complete Display Board AIR SAW BLADES Bi-metal blades to fit popular pneumatic saw machines High-speed cutting edge welded to a tough, shatter resistant back makes this the ideal blade for air saw applications The bi-metal construction obsoletes solid high-speed steel blades previously available Available in,, 8, and tooth for all cutting jobs PNEU-SAW BLADES 8/ 8 8 0 5 0 0 0 5 5 5 5 0 0 Blades are packed 5 per in clear pouches with information inserts 85 985 85 90 70 09 9 00 " x " x 0 9" x " x 0 " x " x 0 " x " x 0 " x " x 0 8" x /" x 050 9" x " x 0 Complete Display Board /8 / /8 Big Blue Display boards are available separately for customization of your own selection of Jig and/or Reciprocating saw blades 0 0 0 0 Recoended Uses 5-5/8" x /" x 9 x x For scroll cuts in heavy metal, composites, fiberglass, plastics 5-5/8" x /" x 5" x /" x 9 x x x x For scroll cutting heavy gauge metal, fiberglass 58 8-5/8" x /" x 5" x /" x 9 x x x x 8 For scroll cutting metals lighter than gauge 5-5/8" x /" x 5" x /" x 9 x x x x For scroll cutting metals lighter than 8 gauge, thin tubing, formed sheet, trim, etc 5-5/8" x /" x 9 x x Fits all standard air saws Packaged 5 per vinyl pouch or 0 per box For scroll cutting very thin gauge metals, sheet, tubing, trim, etc PNEU-SAW BLADES Recoended Uses 0 " TAPER 05 0 TAPER 05 08 " TAPER 05 0 TAPER 05 8 0 " TAPER 05 0 TAPER 05 For metals heavier than /8, bar stock, angles, etc Also rubber, masonite, fiberglass, etc For heavy gauge sheet metal, conduit pipe, tubing, thin fiberglass For metals lighter than 8 formed sheet, trim, etc gauge, thin wall tubing, 0 " TAPER 05 0 TAPER 05 For very thin gauge metals, sheet, tubing, trim, etc Fits Nitto Kohki air saws Packaged 5 per vinyl pouch or 0 per box 8
CIRCULAR SAW BLADES All Sterling circular tungsten carbide tipped saw blades have a micro grain cobalt binder with a small amount of titanium for added cutting life They are ground to very exact tolerances for optimum performance and tool life All blades are resharpenable IMPORTED FERROUS AND NONFERROUS BLADES Ferrous and nonferrous metal cutting blades cut with fewer burrs and less heat than abrasive blades, there is no need for secondary finish grinding The modified triple chip grind resists material build up on the tooth allowing for longer life between resharpenings Description Arbor RPM Grade Application 700 7 -/" x T TCG Saw Blade (Ferrous) 5/8" 5800 C- 705 8 " x 8T TCG Saw Blade (Ferrous) 5/8" 5800 C- 707 9 " x 8T TCG Saw Blade (Ferrous) " 500 C- 7 " x 80T TCG Saw Blade (Ferrous) 5/8" 5800 C- 75 " x 0T TCG Saw Blade (Ferrous) " 000 C- 70 " x 0T TCG Saw Blade (Ferrous) " 700 C- 70 " x 0T TCG Saw Blade (Nonferrous ) 5/8" 7000 C- Packaged per box Diamond Arbor Steel Cutting Steel Cutting Steel Cutting Steel Cutting Steel Cutting Steel Cutting Aluminum Cutting WOOD CUTTING BLADES Thin kerf wood cutting blades feature an alternate tooth bevel grind for fast clean cuts Description Arbor RPM Grade Application 750 7 -/" x T ATB Saw Blade 5/8" 7000 C- 755 7 -/" x 0T ATB Saw Blade 5/8" 7000 C- 70 8 -/" x T ATB Saw Blade 5/8" 7000 C- 75 " x 0T ATB Saw Blade 5/8" 7000 C- 770 " x 0T ATB Saw Blade 5/8" 7000 C- 775 " x 80T ATB Saw Blade 5/8" 7000 C- 780 " x 80T ATB Saw Blade " 7000 C- Framing/General Purpose Finishing Framing/General Purpose General Purpose General Purpose Fine Finishing Ultra Fine Finishing Fine Finishing 785 " x 9T ATB Saw Blade " 7000 C- Packaged per box Diamond Arbor Ultra Fine Finishing DADO SETS The dado sets feature top bevel ground outside saws and chipper sets These blades stay SHARP longer even when cutting man made materials like particle board, laminated plywood, melamine and plastics Description Arbor RPM Grade Application 790 " x 0T Stack Dado 5/8" 7000 C- 79 8 " x T Stack Dado 5/8" 7000 C- Packaged per box 9 Dado Cutting Dado Cutting
PORTABLE HACKSAW BLADES PORTA-HACK BI-METAL PORTA-HACK blades are used by utility companies, petro chemical plants and large contractors for job-site cutting of pipe, structurals and other materials Length x Width Recoended Uses 90 x -/ 00 x Thinner sections of steel, brass, bronze, fiberglass, etc 907 x -/ 0 x Thinner sections of steel, brass, bronze, fiberglass, etc 99 x -/ 0 x 8 For heavier sections of steel, brass, bronze, fiberglass, etc 90 x -/ 55 x Thinner sections of steel, brass, bronze, fiberglass, etc 97 x -/ 00 x Thinner sections of steel, brass, bronze, fiberglass, etc 975 0 x -/ 75 x Thinner sections of steel, brass, bronze, fiberglass, etc Packaged blades per box POWER HACKSAW BLADES SHATTERPROOF BI-METAL Sterling power hacksaw blades have an M- high speed steel cutting edge welded to a tough alloy steel back The bi-metal construction results in a strong, shatter-resistant blade for high productivity and safety in the toughest cutting applications The extra width of this blade gives rigidity and durability, cut after cut 0 x x 050 00 x 5 x 0 x x 050 x x 050 x -/ x 0 x -/ x 0 50 x 5 x 50 x 5 x 50 x x 50 x x 0 x -/ x 075 50 x 8 x 9 80 8 x -/ x 0 50 x x 9 9 8 x -/ x 075 8 x -/ x 075 50 x 8 x 9 50 x 8 x 9 0 8 x -/ x 08 8 50 x 5 x 8 x -/ x 088 55 x 5 x 5 x x 0 00 x 50 x 5 Packaged blades per box Packaged blades per box VISIT US ON THE WEB AT: wwwdiamondsawcom wwwsterlingsawbladescom 0
HAND HACKSAW BLADES BI-METAL SHATTERPROOF Shatter resistant bi-metal construction allows blades to bend and flex The high hardness tool steel cutting edge provides extended tool life compared to other hacksaw blades The original varied pitch tooth design was patented and introduced by Diamond Saw in 97, on hand hacksaw blades Over the years, improvements and variations have kept this blade on top in cutting ease and efficiency Recoended Uses 077 x / x 00 x x 0 For cutting heavy gauge metal, fiberglass 079 x / x 00 x x 0 8 For cutting metals lighter than gauge 08 x / x 00 x x 0 For cutting metals lighter than 8 gauge tubing, formed sheet, trim, etc 08 x / x 00 x x 0 For cutting very thin gauge metals, sheet, tubing, trim, etc 07 x / x 00 x x 0 8/ 075 x / x 00 x x 0 /0 Packaged 5 per vinyl pouch or 0 per box Varied pitch mitigates tooth strippage problems and allows for faster cuts in a wider variety of applications HAND HACKSAW FRAME High Tension hacksaw frame for " bi-metal hacksaw blades allows tensioning of bi-metal hacksaw blades up to 8000 PSI by turning tension knob four complete turns Blades can be mounted straight or at a 5 angle for flush cutting Extra blade storage inside hollow tube Includes - hacksaw blade 0 High Tension Hand Hack Saw Frames (Black) Packed 5 per box PVC /ABS Plastic Pipe Saw Handle (Silver) Packed 5 per box PVC/ABS PLASTIC PIPE SAW BLADES SPRING TEMPERED Sterling PVC/ABS Plastic Pipe Blades are of one-piece spring tempered carbon construction The cutting edge is hardened to - RC for good wear resistance The spring tempered back resists flexing while cutting on both the push and pull strokes Cuts plastic, wood, drywall, PVC and ABS pipe The heavy duty aluminum handle is easy to assemble with a single screw blade attachment Available with or without handle 70 708 700 7080 Packaged 5 per box 8 Blade with Handle 00 50 Replacement Blades x -/ x 05 8 x -/ x 05 00 x x 50 x x
HOLE SAWS BI-METAL VARIED PITCH Sterling hole saws are available in bi-metal construction known for its endurance and shatterproof qualities High hardness teeth welded to a tough backer material, coupled with varied pitch, positive rake teeth makes Sterling hole saws the first choice CARBIDE TIPPED Sterling carbide tipped hole saws are especially suited for cutting holes in fiberglass, transite, flake board and cast iron when standard high speed hole saws will not do the job BLUE DIAMOND Blue Diamond hole saws are manufactured of a tough bi-metal matrix steel with 0/50 blended diamond grit nickel matrix braze bonded to their edge With a cutting depth of -/, these hole saws are normally used for cutting a variety of abrasive non-ferrous materials Bi-Metal Carbide Tipped Diamond Edge Diameter Add 00 to Diamond Edge 55009 N/ A 50 9/" 550 N/ A 55 5/8" 550 N/ A 5 /" 7 550 50 55 /" 9 550 50 50 /" 550 50 55 7/8" 5505 505 50 5/" 550 50 55 " 5 5507 507 50 -/" 5508 508 55 -/8" 9 5509 N/ A 550 -/" 0 5500 500 555 -/" 550 N/ A 50-5/" 550 50 55 -/8" 5 550 50 570-7/" 7 550 50 575 -/" 8 5505 505 580-9/" 0 550 50 585-5/8" 550 50 590 -/" 5508 508 595 -/" 5509 509 500 -/" 5500 500 505-7/8" 8 550 50 5 " 5 550 50 55 -/" 5 Bi-Metal Carbide Tipped Diamond Edge Diameter Add 00 to Diamond Edge 5507 507 50-5/" 59 5508 508 55 -/8" 0 5500 500 50 -/" 550 N/ A 55-9/" 5 550 50 550-5/8" 7 550 50 555 -/" 70 550 50 50-7/8" 7 5508 508 55 " 7 55050 5050 50 -/8" 79 5505 505 55 -/" 8 5505 505 580 -/8" 8 5505 505 585 -/" 89 55058 5058 590-5/8" 9 5500 500 595 -/" 95 550 50 500-7/8" 98 550 50 505 " 550 50 5 -/8" 5 5508 508 55 -/" 8 55070 5070 50 -/8" 5507 507 55 -/" 5507 507 50 -/" 55080 5080 55 5" 55088 5088 50 5-/" 0 550 50 50 -/8" 5 550 50 55 -/" 57 Packaged per box 5509 509 N / A 5-/" 5509 509 55 " 5 Packaged per box
HOLE SAW KITS & ACCESSORIES HOLE SAW KITS A selection of four different hole saw kits which include Bi-Metal Pro Pack, Bi-Metal Plumber s, Bi-Metal Electrician s and Carbide Tipped kits The contents of each kit include the most coonly used hole saws, arbors and accessories used for that particular trade task All hole saws are packed in a sturdy plastic case Packaged per box ARBORS A selection of five different arbors, each supplied with a ¼ pilot drill, will accoodate all universal types of hole saws Order arbors by product number to fit whatever hole saw is being used The quick change arbor (5705) permits the change of a hole saw without removal of the arbor from the chuck Packaged per box ¼ PILOT DRILLS A pilot drill is included with each arbor or is available separately Packaged per pouch ARBOR ADAPTOR This arbor adaptor converts ½ -0 threaded arbors (5705, 570, 5708) to 5/8"-8 thread size to accoodate larger diameter saws Not recoended for use with saws over -/" diameter Packaged per pouch BI-METAL PRO PACK HOLE SAW KIT(#5755) Includes: - / hole saw - hole saw - 7/8 hole saw - -/ hole saw - -/8 hole saw - -/ hole saw - -/8 hole saw - (5705) 7/ hex arbor - -/ hole saw - (5705) Additional / pilot drill - -/ hole saw - (57000) Arbor adaptor BI-METAL PLUMBER S HOLE SAW KIT(#5758) Includes: - / hole saw - -/ hole saw - 7/8 hole saw - -/ hole saw - -/8 hole saw - (5705) 7/ hex arbor - -/ hole saw - (5705) Additional / pilot drill BI-METAL ELECTRICIAN S HOLE SAW KIT(#575) Includes: - 7/8 hole saw - -/ hole saw - -/8 hole saw - (5708) 7/ hex arbor - -/8 hole saw - (5705) 7/ hex arbor - -/ hole saw - (5705) Additional / pilot drill - hole saw CARBIDE TIPPED HOLE SAW KIT(#57507) Includes: - / hole saw - 7/8 hole saw - -/8 hole saw - -/8 hole saw - -/ hole saw - -/ hole saw Quick change design, with knurled collar ARBORS & ACCESSORIES Item No Fits Hole Saw Diameters - hole saw - -/ hole saw - -/ hole saw - (5705) 7/ hex arbor - (5705) Additional / pilot drill - (57000) arbor adaptor Follows Through Shank Thread Size Chuck Size 5705 9 /" - -/" " - -/" /" hex /-0 /" 570 9 /" - -/" " - -/" /8" hex /-0 /8" 5708 9 /" - -/" 7/8" - -/" 7/" hex /-0 /" 5700 -/" - -/8" -/" - -/8" 7/" hex 5 /8-8 /" 5705 -/" - " -7/" - " 7/" hex 5 /8-8 /" 5705 " LONG /" PILOT DRILL (For /" Rd, 7/" hex & 5/8" hex) 570 " LONG /" PILOT DRILL (For /" hex & /8" hex) 5500 " PILOT DRILL FOR USE WITH DIAMOND EDGE 570 " EXTENSION (For 7/" hex shank) 57000 Converts /" - 0 threaded arbors (5705, 570 thread size to accomodate larger diameter saws Quick change design, with knurled collar and 5708) to 5/8" - 8 Pilot Drills (5705, 570) and extension (57000) are packaged per pkg All others per pkg Catalog PC9 July 0
DIAMOND SAW WORKS, INC 90 OLEAN ROAD CHAFFEE, NEW YORK USA 00-978 PHONE: 7-9-77 PHONE: 800-88-80 FAX: 800--885 EMAIL: sales@diamondsawcom WEB: wwwdiamondsawcom wwwsterlingsawbladescom Portland, OR Warehouses in: Phoenix, AZ Charlotte, NC