Magnetic absolute single-turn encoder BMSH MAGRES parallel features robust single-turn encoder up to 9 bit parallel interface miniature housing zero-point programmable general data voltage supply 5 VDC ±0% (05T) max. supply current typ. 00 ma no load output circuit parallel 5 VDC max. measuring step 9 bit ( step = 4' '') max error limit ± repeatability 0,3 max. switching frequency 5, khz input signal zero (zero setting: < 0,4 V, > ms off state: 3,3 V or open) direction of rotation looking at the MAGRES-flange, position counts up as the shaft rotates clockwise (CW) mechanical data max. revolutions '000 rpm (mechanical) 6'000 rpm (electrical) moment of inertia typ. x 0-7 kgm torque typ. 0,93 cnm (3'000 rpm / 0 C / IP4) product life depending on ambient conditions (typ. 0 9 revolutions) max. protection class shaft: IP 65 housing: IP 65 material housing: steel/aluminum flange: aluminum weight approx. 0 g ambient conditions temperature range -0...+85 C relative humidity max. relative humidity 95% vibration IEC 60068--6 ( 300 m/s / 0 - '000 Hz) shock IEC 60068--7 ( '000 m/s / 6 ms) noise immunity EN 6000-6- emitted interference EN 6000-6-3 order designation BMSH 4S 05T09/00 5 accessories 05T 5 VDC output TTL N binary code G Gray code connection 5 cable m radial hollowshaft B endshaft mm IP 4 withclamping ring P endshaft mm IP 65 withclamping ring resolution 09 9 bit voltage supply/output clamp set part nr. 066 spring plate set part nr. 3860 shaft adapter see chapter accessories clamping ring set mm hollow shaft part nr. 4556. 0
BMSH 4 MAGRES parallel dimensions assignment cable -5 ø 4, 6 3 x 0 0 5 33 4 H7 x 5 38 0-0.05 for connection reference -5 cable color signal description brown +VS voltage supply white 0 V voltage supply green bit LSB data yellow bit data grey bit 3 data pink bit 4 data blue bit 5 data red bit 6 data black bit 7 data purple bit 8 data grey/pink bit 9 MSB data red/blue zero zero setting input screen housing cable specs 6 x 0,4 mm 40 Note Mounting drawings see end of chapter..
Magnetic absolute single-turn encoder BMSH MAGRES SSI features robust single-turn encoder up to bit SSI interface miniature housing zero-point programmable general data voltage supply 5 VDC ±0% (05C) max. supply current typ. 00 ma no load output circuit SSI, RS 4 max. resolution bit ( step = 5' 6'') max error limit ± repeatability 0,3 max. clock frequency MHz input signal clock input, zero (zero setting: < 0,4 V, > ms off state: 3,3 V or open) direction of rotation looking at the MAGRES-flange, position counts up as the shaft rotates clockwise (CW) mechanical data max. revolutions '000 rpm (mechanical) 6'000 rpm (electrical) moment of inertia typ. x 0-7 kgm torque typ. 0,93 cnm (3'000 rpm / 0 C / IP 4) product life depending on ambient conditions (typ. 0 9 revolutions) max. protection class shaft: IP 65 housing: IP 65 material housing: steel/aluminum flange: aluminum weight approx. 0 g order designation BMSH 4S 05C/00 5 N binary code G Gray code connection 5 cable m radial shaft B end shaft mm IP 4 P end shaft mm IP 65 resolution bit voltage supply/output 05C 5 VDC SSI interface ambient conditions temperature range -0...+85 C relative humidity max. 95% vibration IEC 60068--6 ( 300 m/s / 0 - '000 Hz) shock IEC 60068--7 ( '000 m/s / 6 ms) noise immunity EN 6000-6- emitted interference EN 6000-6-3 accessories clamp set part nr. 066 spring plate set part nr. 3860 shaft adapter see chapter accessories clamping ring set mm hollow shaft part nr. 4556.
BMSH 4 MAGRES SSI dimensions assignment cable -5 ø 4, 6 3 x 0 0 5 33 H7 x 5 38 0-0.05 for connection reference -5 cable color signal description brown +VS voltage supply white 0 V voltage supply grey data+ data signal pink data- data signal green clock+ clock signal yellow clock- clock signal blue zero zero setting input red d.u. do not use screen housing cable 8 x 0,4 mm 4 40 Note Mounting drawings see end of chapter. read out of position values n clock t T t3 clock data t Bit n Bit n- Bit 3 Bit Bit pulse times: T = µs to 0 µs / t = 0,5 to 5 µs t < 0, µs / t3 > µs to 5 µs. 3
Magnetic absolute single-turn encoder BMSH MAGRES CANopen features robust single-turn encoder up to bit CANopen interface integrated miniature housing programmable resolution and preset values general data voltage supply max. supply current no load output circuit 0-30 VDC (4B) typ. 00 ma (at 4 VDC) CAN-Bus, Standard ISO/DIS 898 specification CAN.0B protocol/profile CANopen/CIA, DS-30 V4.0, DSP-305 V.0 (LSS), DS-406 V3.0 natural binary code angular resolution bit ( step = 5'6'') max error limit ± repeatability 0,3 max. baud rate Mbit/s direction of rotatioin looking at the flange, position counts up as the shaft rotates clockwise (CW), programmable order designation BMSH 4SN 4B/00 connection 5 cable m radial N connector radial M shaft B end shaft mm IP 4 P end shaft mm IP 65 resolution single-turn bit voltage range, output signals 4B 0-30 VDC, CANopen N binary code mechanical data max. revolutions '000 rpm (mechanical) 6'000 rpm (electrical) moment of inertia x 0-7 kgm operation torque typ. 0,93 cnm (3'000 rpm / 0 C / IP 4) product life depending on ambient conditions (typ. 0 9 revolutions) max. protection class IP 65 material housing: steel flange: aluminum weight approx. 90 g ambient conditions temperature range -0...+85 C relative humidity max. 95% non condensing vibration IEC 60068--6 ( 300 m/s / 0 - '000 Hz) shock IEC 60068--7 ( '000 m/s / 6 ms) noise immunity EN 6000-6- emitted interference EN 6000-6-3. 4
BMSH 4 MAGRES CANopen dimensions assignment cable cable color signal description brown +VS voltage supply ø 4, 6 3 x 0 H7 x5 white 0 V voltage supply green CAN_H bus line (dominant HIGH) yellow CAN_L bus line (dominant LOW) grey CAN_GND CAN ground pink n.c. blue d.u. do not use red d.u. do not use screen housing 6 8,5 33 38 0-0.05 cable data 8 x 0,4 mm 47 4 assignment 5-pin M male pin signals connector n.c. not connected, 3 x 0 H7 x5 +VS voltage supply 3 CAN_GND CAN ground / 0 VDC 4 CAN_H bus line (dominant HIGH) 5 CAN_L bus line (dominant LOW) 9 ø 4 6 9 33 Note Mounting drawings see end of chapter. accessories clamp set part nr. 066 spring plate set part nr. 3860 shaft adapter see chapter accessories CD-ROM with GSD-/EDS-/XML- part nr. 4736 files and manuals clamping ring set mm hollow shaft part nr. 4556 connector (female) M CAN part nr. 53968 connector (male) M CAN part nr. 53969 T connector M CAN part nr. 5397 terminating resistor part nr. 53974. 5
Magnetic absolute single-turn encoder BMSH MAGRES DeviceNet features robust single-turn encoder up to bit DeviceNet interface integrated miniature housing programmable resolution and preset values general data voltage supply max. supply current no load output circuit protocol/profile angular resolution max error limit ± repeatability 0,3 max. baud rate 500 kbit/s direction of rotatioin 0-30 VDC typ. 00 ma (at 4 VDC) CAN-Bus, Standard ISO/DIS 898 DeviceNet, Device Profile for Encoders V.0 natural binary code bit ( step = 5'6'') looking at the flange, position counts up as the shaft rotates clockwise (CW), programmable order designation BMSH 4SN 4D/00 connection 5 cable m radial N connector radial M shaft B end shaft mm IP 4 P end shaft mm IP 65 resolution single-turn bit voltage range, output signals 4D 0-30 VDC, DeviceNet N binary code mechanical data max. revolutions '000 rpm (mechanical) 6'000 rpm (electrical) moment of inertia x 0-7 kgm operation torque typ. 0,93 cnm (3'000 rpm / 0 C / IP 4) product life depending on ambient conditions (typ. 0 9 revolutions) max. protection class IP 65 material housing: steel flange: aluminum weight approx. 90 g ambient conditions temperature range -0...+85 C relative humidity max. 95% non condensing vibration IEC 60068--6 ( 300 m/s / 0 - '000 Hz) shock IEC 60068--7 ( '000 m/s / 6 ms) noise immunity EN 6000-6- emitted interference EN 6000-6-3. 6
BMSH 4 MAGRES DeviceNet dimensions assignment cable cable color signal description brown +VS voltage supply ø 4, 6 3 x 0 H7 x5 white 0 V voltage supply green CAN_H bus line (dominant HIGH) yellow CAN_L bus line (dominant LOW) grey CAN_GND CAN ground pink n.c. blue d.u. do not use red d.u. do not use screen CAN_SHLD CAN shield 6 8,5 33 38 0-0.05 cable data 8 x 0,4 mm 47 4 assignment 5-pin M male pin signals connector CAN_SHLD CAN shield, 3 x 0 H7 x5 +VS voltage supply 3 CAN_GND CAN Ground / 0 VDC 4 CAN_H bus line (dominant HIGH) 5 CAN_L bus line (dominant LOW) 9 ø 4 6 9 33 Note Mounting drawings see end of chapter. accessories clamp set part nr. 066 spring plate set part nr. 3860 shaft adapter see chapter accessories CD-ROM with GSD-/EDS-/XML- part nr. 4736 files and manuals clamping ring set mm hollow shaft part nr. 4556 connector (female) M CAN part nr. 53968 connector (male) M CAN part nr. 53969 T connector M CAN part nr. 5397 terminating resistor part nr. 53974. 7