pro audio hf devices components guitar bass

2 011 pro audio hf devices components guitar bass

There s no doubt the guitar speaker is one of the most important pieces of the tone puzzle. With no practical way to demo them in a retail environment, it has always been a challenge for retailers to sell replacement or upgrade speakers. Until NOW, that is. The Eminence Tone Center, consisting of a 4x12 cabinet loaded with four uniquely voiced guitar speakers and a foot switch, finally offers the consumer the ability to play through a selection of speakers by plugging in any amplifier of their choice. With full color graphics and product information cards for each model, this retail display makes a consumer s purchase decision easy. Learn more at www.eminence.com. it s never been easier to

Thank you for considering Eminence products! We are proud of our long history of manufacturing loudspeakers here in Eminence, Kentucky. Each product is made by hand with quality, value and service in mind. We know that real performance and tone only come from pride, passion and attention to detail. We all thank you for helping to keep us doing what we love, and for keeping the American dream alive! pro audio PROFESSIONAL series...4 NEODYMIUM series...12 AMERICAN STANDARD...18 HF DRIVERS...28 SUPERTWEETERs...29 HORN FLARES...29 CROSSOVERS...31 For a complete list of Eminence distributors and to access our US dealer finder, please visit http://www.eminence.com guitar exclusive fdm technology...33 acoustic series...34 legend series...35 Patriot series...37 redcoat series...42 BASS GUITAR...46 REFERENCE GUITAR SPEAKER tone guide...50 LOUDSPEAKER DATA explained...52 Designing enclosures...54 FOOTNOTES * Please consult www.eminence.com for specifications of models with alternative impedances. ** Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment. *** The average output across the usable frequency range when applying 1W/1m into the nominal impedance. Ie: 2.83 V/, 4 V/16 ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle 2 ft. x 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction Hafler P1500 Trans-Nova amplifier 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custommade wedges). **** BETA 8CX, 10CX, 12CX and ACOUSTINATOR CX2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver. ***** Multiple units exceeded published rating evaluated under AES500 and AES800 noise sources and test standards while mounted on Eminence s TI-2000 horn in a nontemperature-controlled environment. ****** The average on axis output across the entire usable frequency range when applying 1W/1m into the nominal impedance while mounted on the h2ea horn measured with: LMS (software calibrated) using a 0.25" [6.4mm] supplied microphone mounted 1m from horn mouth, Hafler P1500 Trans-Nova amplifier, 2700 cu. ft. chamber w/fiberglass on all six surfaces (three with custom made wedges). Plane-wave tube response and impedance curves measured with LMS on a 0.75" [19.1mm] diameter tube with adapter to allow for smooth transition to throat diameter and 1W/1m into nominal impedance. Prices and Specifications Subject to Change Without Notice.

professional series If you ve heard live audio, you ve heard the Eminence Professional series loudspeakers. From the pump-it-up sounds of a sports arena, to the latest hits played live by the greatest artists, even the Star-Bangled Banner proudly booming onto the deck of an aircraft carrier. You ll hear them in the local VFW Hall and Moose Lodge. And being reverend or rockin in places of worship. No wonder that for over 40 years, Eminence Professional series loudspeakers have been the brand of choice in audio systems throughout the world. There are 26 unique models in our Professional series so it s easy to find yours. From heavy-duty subwoofers, low distortion woofers, and super high-power woofers to lightweight neodymium transducers in truncated frames for line arrays. Each is designed with your specific needs in mind. Every speaker comes standard with Made in the USA pride, and is backed by a Seven Year Warranty against manufacturer s defects*. There are over 1,200 USA dealers and distributors worldwide. Visit www.eminence.com to find a dealer near you. *Warranty policy may vary outside of the continental United States and Canada. Check with your local distributor for warranty details. No other name in loudspeakers has been so widely depended upon for performance and reliability. The signature of each Eminence Professional model is its cast aluminum Eminence chassis. Lightweight and strong, aluminum keeps the magnetic field inside the gap. That means the motor strength is higher and the stray magnetic field lower. We coat the chassis and all metal parts with an epoxy-acrylic finish. Our in-house e-coat process lets us control the thickness of that coating to within 0.001. That s the diameter of a human hair and it s critical when working with close tolerance transducer motor designs. We then add front and rear sealing gaskets on each model to allow front or rear loading. We are a full line stocking distributor of Eminence components since 1978. Same day shipping call us for a quote today! 800-321-6306 martinsoundpro.com

compatibility closed box reflex box scoop loading horn loading subwoofer usage woofer usage mid bass usage midrange usage delta pro 8a j j j j j delta pro 8b j j j j j Kappa Pro 10A j j j j definimax 4012ho j j j j j j j delta pro 12a j j j j j j Kappa Pro 12A j j j j j lab 12 j j j j definimax 4015lf j j j j j j delta pro 15a j j j j j kappa pro 15A j j j j kappa pro 15lf j j j j j kilomax pro 15a j j j j j LAB 15 j j j j omega pro 15a j j j j j definimax 4018lf j j j j j delta pro18a j j j j j delta pro18c j j j j j kilomax pro 18a j j j j omega pro 18a j j j j j omega pro 18c j j j j j sigma pro 18A j j j j j 5

professional series DELTA PRO-8A KAPPA PRO-10A DEFINIMAX 4012HO SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition DELTA PRO-8A 8, 203mm 8 or 16 ohms 225W 450W 69Hz 100Hz-3kHz 97.8 59 oz. 0.310, 7.95mm 2, 50.8mm 69Hz 5.4 0.82mH 6.43 0.20 0.22 18.32 liters /.65 cu.ft. 66cc 0.35mm/N 14.1 T-M 19 grams 307 3.0mm 218.2 cm2 8.0mm 8-16 liters /.30-.60 cu.ft. 10-16 liters/.40-.60 cu.ft. 63.7 cu.in / 1.04 liters 8.02, 203.71mm 7.36, 186.9mm 0.28, 7.1mm 8.60, 218.4mm 3.75, 95mm 10.0 lbs, 4.5 kg 11 lbs, 4.9 kg Vented and extended core Die-cast aluminum basket Paper cone KAPPA PRO-10A 10, 254mm 500W 1000W 46Hz 102Hz-2kHz 97 80 oz. 0.375, 9.53mm 3, 76.2mm 46Hz 6.50 1.15mH 10.10 0.20 0.20 52.2 liters / 1.8 cu.ft. 110cc 0.31mm/N 18.8 T-M 38 grams 230 3.2mm 344.9 cm2 10.9mm 7-9.9 liters/0.25-0.35 cu.ft. 12-28 liters/0.43-1 cu.ft. 104.8 cu.in / 1.72 liters 10.25, 260.4mm 9.13, 231.8mm 0.28, 7.1mm 9.63, 244.5mm 4.33, 110mm 15.3 lbs., 6.9 kg 16.4 lbs., 7.4 kg Vented core Die-cast aluminum basket DEFINIMAX 4012HO 600W 1200W 46Hz 49Hz-2.5kHz 94 109 oz. 0.375, 9.53mm 4, 101.6mm 46Hz 5.85 1.17mH 5.74 0.38 0.35 59.4 liters / 2.1 cu.ft. 342cc 0.14mm/N 19.6 T-M 86 grams 121 6.2mm 552.0 cm2 11.2mm 26-31 liters/ 0.9-1.1 cu.ft. 36-79 liters/ 1.3-2.8 cu.ft. 179.3 cu.in / 2.94 liters 12.38, 314.3mm 11.06, 281mm 0.28, 7.1mm 11.59, 294.3mm 5.32, 135mm 22.5 lbs., 10.2 kg 29 lbs., 13.1 kg Undercut with copper shorting ring and Core Periphery Ventilation Die-cast aluminum basket Pop-on dust cap 6 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

DELTA PRO-12A KAPPA PRO-12A LAB12 DELTA PRO-12A KAPPA PRO-12A LAB12 6 ohms 400W 800W 51Hz 52Hz-4.5kHz 99.2 80 oz. 0.375, 9.53mm 2.5, 63.5mm 500W 1000W 37Hz 57Hz-2.8kHz 97.1 80 oz. 0.375, 9.53mm 3, 76.2mm 400W 800W 22Hz 25Hz-125Hz 89.2 160 oz. 0.375, 9.53mm 2.5, 63.5mm 51Hz 5.71 0.84mH 7.56 0.37 0.35 81.7 liters / 2.9 cu.ft. 242cc 0.21mm/N 15.3 T-M 48 grams 138 4.6mm 532.4 cm2 13.7mm 37Hz 5.46 1.22mH 6.93 0.25 0.24 121.0 liters / 4.3 cu.ft. 249cc 0.32mm/N 17.3 T-M 59 grams 148 4.8mm 519.5 cm2 14.8mm 22Hz 4.29 1.48mH 13.32 0.39 0.38 125.2 liters / 4.4 cu.ft. 659cc 0.35mm/N 15.0 T-M 146 grams 56 13.0mm 506.7 cm2 22mm 28-35 liters/1-1.25 cu.ft. 31-91 liters/1.1-3.2 cu.ft. 155.5 cu.in / 2.55 liters 12.38, 314.5mm 11.07, 281mm 0.27, 6.9mm 11.57, 293.8mm 6.22, 158mm 16.3 lbs., 7.4 kg 18 lbs., 8.2 kg 17-34 liters/0.6-1.2 cu.ft. 155.5 cu.in / 2.55 liters 12.38, 314.5mm 11.07, 281.1mm 0.26, 6.5mm 11.57, 293.8mm 6.22, 158mm 16.6 lbs., 7.5 kg 18.4 lbs., 8.4 kg 22.7-28.3 liters/ 0.8-1 cu.ft. 45.3-101.9 liters/1.6-3.6 cu.ft. 188.6 cu.in / 3.09 liters 12.32, 312.8mm 10.98, 278.9mm 0.26, 6.6mm 11.77, 299mm 6.44, 164mm 22 lbs., 10 kg 23.8 lbs., 10.8 kg Aluminum voice coil Vented and extended core Vented core Double stacked 80 oz. ferrite magnets Vented and extended core Die-cast aluminum basket Die-cast aluminum basket 12-spoke die-cast aluminum basket Kevlar-reinforced paper cone Foam cone edge Dual inverted dust caps WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 7

professional series DEFINIMAX 4015LF DELTA PRO-15A KAPPA PRO-15A SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition DEFINIMAX 4015LF DELTA PRO-15A KAPPA PRO-15A 15, 381mm 700W 1400W 42Hz 35Hz-1.2kHz 96 109 oz. 0.375, 9.53mm 4, 101.6mm 42Hz 5.04 1.49mH 6.73 0.54 0.5 115.5 liters / 4.1 cu.ft. 786cc 0.11mm/N 18.4 T-M 139 grams 77 9.0mm 872.9 cm2 15.5mm 48-57 liters/ 1.7-2.0 cu.ft. 82-181 liters/ 2.9-6.4 cu.ft. 262.8 cu.in / 4.31 liters 15.21, 386.3mm 14.0, 355.6mm 0.28, 7.1mm 14.56, 369.8mm 6.56, 166.7mm 23.7 lbs., 10.8 kg 26 lbs., 11.8 kg Undercut with copper shorting ring and Core Periphery Ventilation Die-cast aluminum basket Acrylic Wetlook Acrylic wetlook paper dust cap 15, 381mm 400W 800W 42Hz 54Hz-4.2kHz 101.6 80 oz. 0.375, 9.53mm 2.5, 63.5mm 42Hz 5.71 0.83mH 4.73 0.44 0.40 243.5 liters / 8.6 cu.ft. 368cc 0.24mm/N 14.5 T-M 61 grams 95 4.3mm 856.3 cm2 13.7mm 28-42.5 liters/1-1.5 cu.ft. 57-133 liters/2-4.7 cu.ft. 239 cu.in / 3.92 liters 15.32, 389mm 14.0, 356mm 0.28, 7.1mm 14.56, 369.9mm 6.06, 154mm 16.6 lbs., 7.5 kg 19.1 lbs., 8.7 kg Aluminum voice coil Vented and extended core Die-cast aluminum basket 15, 381mm 500W 1000W 47Hz 46Hz-4kHz 101 80 oz. 0.375, 9.53mm 3, 76.2mm 47Hz 5.23 1.01mH 8.01 0.40 0.38 167.7 liters / 5.9 cu.ft. 274cc 0.16mm/N 16.6 T-M 72 grams 118 3.2mm 856.3 cm2 13.2mm 54-184 liters/1.9-6.5 cu.ft. 239 cu.in / 3.92 liters 15.32, 389.1mm 14.0, 355.6mm 0.28, 7.1mm 14.56, 369.9mm 6.06, 154mm 16.9 lbs., 7.7 kg 19.5 lbs., 8.9 kg Aluminum voice coil Vented core Die-cast aluminum basket 8 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

KAPPA PRO-15LF-2 KILOMAX PRO 15A LAB15 KAPPA PRO-15LF-2 KILOMAX PRO 15A LAB15 15, 381mm 15, 381mm 15, 381.0mm 6 ohms 600W 1200W 35Hz 38Hz-1.8kHz 97.8 120 oz. 0.375, 9.53mm 3, 76.2mm 1250W 2500W 41Hz 44Hz-800Hz 95.5 109 oz. 0.375, 9.53mm 4, 101.6mm 600W 1200W 28Hz 20Hz-125Hz 88.5 160 oz. 0.375, 9.53mm 3.0, 76.2mm 35Hz 6.5 1.40mH 7.3 0.32.30 198.8 liters / 7.0 cu.ft. 507cc 0.20mm/N 21.6 T-M 102 grams 112 6.7mm 856.3cm2 18.0mm 41Hz 4.97 1.78mH 8.80 0.40 0.39 154.5 liters / 5.5 cu.ft. 677cc 0.15mm/N 17.7 T-M 98 grams 103 7.9mm 856.3 cm2 13.5mm 28Hz 4.9 3.23mH 5.36.37.35 103.61 liters / 3.7 cu.ft. 968cc 0.11mm/N 26.7 T-M 308 grams 75 11.8mm 823.7 cm2 22mm 76.5-164 liters/2.7-5.8 cu.ft. 262.8 cu.in / 4.31 liters 15.21, 386.4mm 14.0, 355.5mm 0.28, 7.1mm 14.56, 369.9mm 6.57, 167mm 22.3 lbs., 10.1 kg 24.8lbs., 11.3 kg 82-176 liters/2.9-6.2 cu.ft. 262.8 cu.in / 4.31 liters 15.21, 386.3mm 14.0, 355.6mm 0.28, 7.1mm 14.56, 369.8mm 6.42, 163mm 24.7 lbs., 11.2 kg 27.1 lbs., 12.3 kg 35-108 liters/1.2-3.8 cu.ft. 71-290 liters/2.5-10.3 cu.ft. 272.1 cu.in / 4.46 liters 15.34, 389.6mm 14.00, 355.5mm 0.26, 6.6mm 14.70, 373.5mm 7.75, 197mm 23.8 lbs., 10.80 kg 26 lbs, 11.8 kg Vented and extended core Extended core with Core Periphery Ventilation AL former Double stacked 80 oz. ferrite magnets Vented and extended core Die-cast aluminum basket Die-cast aluminum basket Porous cloth top spider/ heatsink Die-cast aluminum basket Kevlar-reinforced paper cone Foam cone edge Acrylic wetlook WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 9

professional series OMEGA PRO-15A DEFINIMAX 4018LF DELTA PRO-18A SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition OMEGA PRO-15A 15, 381mm 800W 1600W 33Hz 51Hz-1.7kHz 97.3 109 oz. 0.375, 9.53mm 4, 101.6mm 33Hz 5.28 1.04mH 5.69 0.33 0.32 258.5 liters / 9.1 cu.ft. 411cc 0.25mm/N 17.5 T-M 94 grams 99 4.8mm 856.3 cm2 12.2mm 57-108 liters/ 2-3.8 cu.ft. 262.8 cu.in / 4.31 liters 15.21, 386.4mm 14.0, 355.6mm 0.28, 7.1mm 14.56, 369.9mm 6.35, 161mm 22.7 lbs., 10.3 kg 25.2 lbs., 11.4 kg Vented and extended core Die-cast aluminum basket DEFINIMAX 4018LF 18, 457.2mm 800W 1600W 32Hz 36Hz-200Hz 95 109 oz. 0.375, 9.53mm 4, 101.6mm 32Hz 6.19 4.78mH 10.38 0.36 0.35 237.9 liters / 8.4 cu.ft. 939cc 0.12mm/N 27.0 T-M 211 grams 89 7.9mm 1188.0 cm2 15.9mm 125-210 liters/ 4.4-7.4 cu.ft. 403.9 cu.in / 6.62 liters 18, 457.2mm 16.57, 420.9mm 0.28, 7.1mm 17.25, 438.2mm 8.13, 206.4mm 24 lbs, 10.9 kg 26 lbs, 11.8 kg Undercut with copper shorting ring and Core Periphery Ventilation Die-cast aluminum basket Acrylic Wetlook Acrylic wetlook paper dust cap DELTA PRO-18A 18, 457mm 8 or 4 ohms 500W 1000W 28Hz 37Hz-250Hz 96 67 oz. 0.380, 9.53mm 2.5, 63.5mm 28Hz 5.3 3.43mH 10.38 0.33 0.32 493.2 liters / 17.41cu.ft. 796cc 0.25mm/N 18.9 T-M 128 grams 84 6.7mm 1188.0 cm2 15.0mm 85-297 liters/3.0-10.5 cu.ft. 367 cu.in / 6.01 liters 18.00, 457.2mm 16.57, 420.9mm 0.28, 7.1mm 17.25, 438.2mm 8.13, 207mm 17.0 lbs, 7.7 kg 20.5 lbs, 9.3 kg Vented and extended core Die-cast aluminum basket Paper cone 10 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

KILOMAX PRO 18A OMEGA PRO-18A SIGMA PRO 18A-2 KILOMAX PRO 18A OMEGA PRO-18A SIGMA PRO 18A-2 18, 457.2mm 18, 457.2mm 18, 457.2mm 8 or 4 ohms 1250W 2500W 32Hz 33Hz-300Hz 95.8 109 oz. 0.375, 9.53mm 4, 101.6mm 800W 1600W 25Hz 40Hz-800Hz 97 109 oz. 0.375, 9.53mm 4, 101.6mm 650W 1300W 28Hz 41Hz-2.4kHz 99 120 oz. 0.375, 9.53mm 3, 76.2mm 32Hz 5.07 1.59mH 10.15.49 0.47 331.5 liters / 11.7 cu.ft. 1159cc 0.18mm/N 17.2 T-M 143.17 grams 64.9 10.0mm 1159.0 cm2 19.2mm 25Hz 5.20 1.67mH 8.18 0.32 0.31 548.7 liters / 19.4 cu.ft. 556cc 0.29mm/N 18.8 T-M 138 grams 79 4.8mm 1159.0 cm2 16.0mm 28Hz 6.29 1.90mH 8.28 0.30 0.29 441.2 liters / 15.6 cu.ft. 695cc 0.24mm/N 22.1 T-M 130 grams 93 6.1mm 1140.0 cm2 18.0mm 104.8-172.7 liters/3.7-6.1cu.ft. 118.9-303 liters/4.2-10.7cu.ft. 403.9 cu.in / 6.62 liters 18, 457.2mm 16.56, 420.6mm 0.28, 7.1mm 17.25, 438.2mm 8.15, 207mm 27.4 lbs., 12.4 kg 30.9 lbs., 14 kg 96-198 liters/ 3.4-7 cu.ft. 403.9 cu.in / 6.62 liters 18, 457.2mm 16.56, 420.5mm 0.28, 7.1mm 17.25, 438.2mm 8.15, 207mm 25.2 lbs., 11.4 kg 28.9 lbs., 13.1 kg 93-212 liters/3.3-7.5 cu.ft. 403.9 cu.in / 6.62 liters 18, 457.2mm 16.56, 420.5mm 0.28, 7.1mm 17.25, 438.2mm 8.15, 207mm 24.5 lbs., 11.1 kg 28.1 lbs., 12.8 kg Kapton Extended core with Core Periphery Ventilation Die-cast aluminum basket Treated Paper-Kevlar Porous cloth top spider/ heatsink Vented and extended core Die-cast aluminum basket Vented and extended core Die-cast aluminum basket WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 11

neodym ium series The basic design of the loudspeaker hasn t changed much in the past 50 years. On the contrary, many materials incorporated in loudspeaker design have improved dramatically. Back in the 50s and 60s, Alnico was the most common magnet used in loudspeakers. However, a shortage in materials and increased costs for Alnico during that time precipitated a shift to the widespread use of the ceramic magnets most of us are familiar with today. Just before the turn of this century, speaker manufacturers started seriously evaluating the potential benefits of using neodymium magnets in loudspeakers. Although neodymium magnets were expensive, they allowed loudspeaker motors to be as little as half the weight of comparable ceramic magnet motors. Prices of neodymium started coming down and interest in lighter weight speakers grew, as did neodymium speaker options. Eminence is the industry leader in neodymium loudspeaker design. The Eminence LA, Deltalite and Kappalite models represent very lightweight, high performance loudspeakers without compromises in power handling, performance or reliability. There are 8 unique models available in our Neodymium Professional series. Each was designed with a specific application in mind. From heavy-duty subwoofers, midranges, and transducers in truncated frames for line arrays, there is an Eminence Neodymium Professional model for your application. Each product includes Made in the USA pride, along with a Seven Year Warranty against manufacturer s defects*. With over 1,200 USA dealers and distributors worldwide, you can easily find them in a store near you. *Warranty policy may vary outside of the continental United States and Canada. Check with your local distributor for warranty details. 12

compatibility closed box reflex box horn loading subwoofer usage woofer usage mid bass usage midrange usage Alphalite 6a j j j j j j alphalite 6 CBMR j j la8 cnmba j j j j j j deltalite ii 2510 j j j j j deltalite ii 2512 j j j j j kappalite 3012ho j j j j j j kappalite 3012lf j j j j j Deltalite ii 2515 j j j j kappalite 3015 j j j j kappalite 3015lf j j j j 13

NEODYMIUM SERIES ALPHALITE 6A ALPHALITE 6 CBMR LA8-CNMBA DELTALITE II 2510 SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details ALPHALITE 6A 6.5, 165.1mm 100W 200W 125.55Hz 74Hz-5.5kHz 94 3.5 oz. 0.25, 6.35mm 1.5, 38.1mm 126Hz 7.3.53mH 6.30 0.61 0.56 4.92 liters /.17 cu.ft. 46 cc 0.21mm/N 8.5 T-M 7.7 grams 204.9 3.5mm 129.9 cm2 4.0mm 2.83-8 liters/.1-8 cu.ft. 3-16 liters/.1-.6 cu.ft. 15.1 cu.in / 0.25 liters 6.59, 167.39mm 5.69, 144.53mm 0.23, 5.8mm 6.06, 153.9mm 2.40, 61mm 2.2 lbs, 1.00 kg 2.9 lbs, 1.3 kg Round Kapton Neodymium magnet Vented and Extended core ALPHALITE 6 CBMR 6.5, 165mm 100W 200W 500.52Hz 500Hz-4.3kHz 99.8 4 oz. 0.25, 6.35mm 1.5, 38.1mm 501Hz 7.4.49mH 9.09 1.83 1.53 0.27 liters /.01 cu.ft. 1.40 cc 0.01mm/N 9.8 T-M 7.6 grams 273.2 0.1mm 139.7 cm2 1.6mm 15.1 cu.in / 0.25 liters 6.59, 167.39mm 5.69, 144.53mm 0.23, 5.8mm 6.06, 153.9mm 2.40, 61mm 2.3 lbs., 1.04 kg 3.0 lbs, 1.3 kg Kapton Neodymium magnet LA8-CNMBA 8, 203mm 225W 450W 82Hz 82Hz-3.2kHz 95.5 7 oz. 0.28, 6.99mm 2.5, 63.5mm 81Hz 5.6 0.62mH 4.66 0.40 0.37 10.95 liters /0.39 cu.ft. 100cc 0.16mm/N 13.0 T-M 24 grams 201 4.5mm 222.4 cm2 8mm 7-17 liters/ 0.2-.6 cu.ft. 10-17 liters/0.4-0.6 cu.ft. 33.5 cu.in / 0.55 liters 8.02, 203.7mm 7.36, 186.9mm.28, 7.11mm 8.60, 218mm 3.90, 99.06mm 4.77 lbs., 2.2 kg 5.47 lbs., 2.4 kg Edge Wound Neo magnet Vented core Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Treated paper dust cap Full Treated paper dust cap Die-cast aluminum basket Paper cone 14 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

DELTALITE II 2512 KAPPALITE 3012HO KAPPALITE 3012LF DELTALITE II 2510 DELTALITE -II 2512 KAPPALITE 3012HO KAPPALITE 3012LF 10, 254mm 12, 305mm 12, 305mm 250W 250W 400W 450W 500W 500W 800W 900W 53Hz 37Hz 52Hz 37Hz 60Hz-4kHz 48Hz-4kHz 51Hz-3.5kHz 46Hz-2.0kHz 97.3 99.9 100.5 95.5 7 oz. 7 oz. 11 oz. 11 oz. 0.275, 7mm 0.275, 7mm 0.365, 9.27mm 0.365, 9.27mm 2.5, 63.5mm 2.5, 63.5mm 3, 76.2mm 3, 76.2mm 53Hz 37Hz 51.5Hz 37.02Hz 5.06 5.04 5.5 5.6 0.40mH 0.46mH 0.57mH 0.98mH 5.76 3.13 8.39 6.94 0.45 0.44 0.33 0.34 0.42 0.39 0.32 0.32 52.5 liters / 1.9 cu.ft. 147 liters / 5.2 cu.ft. 81.10 liters / 2.86 cu.ft. 106.65 liters / 3.77 cu.ft. 147cc 255cc 330cc 496cc 0.30mm/N 0.38mm/N 0.20mm/N 0.26mm/N 10.6 T-M 11.3 T-M 15.9 T-M 16.7 T-M 31 grams 49 grams 46.9 grams 72.4 grams 117 84 157.4 109.7 4.2mm 4.9mm 6.2mm 9.1mm 350.1 cm2 519.5 cm2 532.4 cm2 545.4 cm2 8.0mm 8.5mm 12.5mm 14.5mm 12.7-17 liters/0.45-0.6cu.ft. 23-28 liters/0.8-1cu.ft. 28-76 liters/1.0-2.7 cu.ft. 23-59 liters/1.3-3.0 cu.f.t 17-39.6 liters/0.6-1.4cu.ft. 33-85 liters/1.2-3cu.ft. 41-110 liters/1.5-3.9 cu.ft. 37-85 liters/1.3-3.0 cu.ft. 45 cu.in / 0.74 liters 86.4 cu.in / 1.42 liters 93.6 cu.in / 1.53 liters 95.3 cu.in / 1.56 liters 10.25,260.4mm 12.38, 314.5mm 12.38, 314.45mm 12.38, 314.45mm 9.15, 232.4mm 11.06, 280.9mm 11.06, 280.9mm 11.06, 280.9mm 0.28, 7.1mm 0.28, 7.1mm 0.28, 7.1mm 0.28, 7.1mm 9.73, 247.1mm 11.62, 295.1mm 11.62, 295.2mm 11.62, 295.2mm 4.9, 123.8mm 6.06, 154mm 5.63, 143mm 6.00, 152.4mm 4.6 lbs., 2.1 kg 5.1 lbs., 2.3 kg 7.1 lbs, 3.22 kg 7.6 lbs, 3.45 kg 5.7 lbs., 2.6 kg 6.8 lbs., 3.1 kg 8.7 lbs., 3.95 kg 9.2 lbs., 4.17 kg Aluminum voice coil Aluminum voice coil Aluminum voice coil Copper Voice coil Kapton Kapton Neodymium magnet Neodymium magnet Neodymium magnet Neodymium magnet Vented core Vented core Vented core Vented core Die-cast aluminum basket/ heatsink Die-cast aluminum basket/ heatsink Die-cast aluminum basket Die-cast aluminum basket Treated Treated Sealed Cloth Surround Sealed Cloth Edge Treated paper dust cap Treated paper dust cap WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 15

NEODYMIUM SERIES DELTALITE -II 2515 KAPPALITE 3015 KAPPALITE 3015LF SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details DELTALITE -II 2515 15, 381mm 300W 600W 42Hz 54Hz-3.7kHz 99.2 7 oz. 0.275, 7mm 2.5, 63.5mm 42Hz 5.29 1.15mH 4.56 0.41 0.38 204 liters / 7.2 cu.ft. 411cc 0.20mm/N 15.7 T-M 72 grams 103 4.8mm 856.3 cm2 9.0mm 42.5-48 liters/1.5-1.7cu.ft. 51-119 liters/1.8-4.2cu.ft. 145.1 cu.in / 2.38 liters 15.32, 389mm 14.0, 355.6mm 0.28, 7.1mm 14.56, 369.9mm 6.81, 173mm 5.7 lbs., 2.6 kg 7.9 lbs., 3.6 kg Aluminum voice coil Neodymium magnet Vented core KAPPALITE 3015 15, 381mm 450W 900W 45Hz 40Hz-4kHz 100.8 11 oz. 0.365, 9.27mm 3, 76.2mm 45Hz 5.27 0.64mH 6.70 0.36 0.34 153 liters / 5.4 cu.ft. 505cc 0.15mm/N 18.6 T-M 84 grams 125 5.9mm 856.0 cm2 11mm 51-144 liters/1.8-5.1cu.ft. 155.2 cu.in / 2.54 liters 15.32, 389.1mm 14.0, 356.4mm 0.28, 7.1mm 14.56, 369.8mm 6.8, 173mm 7.9 lbs., 3.6 kg 10.1lbs., 4.6 kg Neodymium magnet Vented core KAPPALITE 3015LF 15, 381mm 450W 900W 44Hz 40Hz-1.5kHz 98.4 11 oz. 0.365, 9.27mm 3, 76.2mm 44Hz 5.5 0.93mH 8.97.48.46 150.9 liters / 5.3 cu.ft. 846cc 0.14mm/N 17.0 T-M 93.4 grams 90 9.6mm 881.1 cm2 17.0mm 99-195 liters/3.5-6.9 cu.ft. 156.4 cu.in / 2.56 liters 15.32, 389.1mm 14.03, 356.4mm 0.28, 7.1mm 14.56, 369.8mm 7.25, 184.2mm 8.6 lbs., 3.9 kg 10.7 lbs., 4.9 kg Kapton Neodymium magnet Vented core Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Die-cast aluminum basket/ heatsink Die-cast aluminum basket/ heatsink Die-cast aluminum basket/heatsink Treated Treated paper dust cap 16 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

sales service diagnostics installation As a Charter Genuine Eminence Distributor our huge inventory is ready to ship today THE TONE CHAMBER With over 75 years of combined experience, our in-house technical staff is available for application specific consulting Factory Authorized Genuine Eminence Warranty and Service Our 7500 sq. ft. warehouse is centrally located in North America for fast and economical delivery Same Day Shipping and Express Shipping Services available LoudspeakersPlus 450 S. Spruce St. Unit G Manteno, IL 60950 1.866.963.0733 www.loudspeakersplus.com www.speakerreconingservice.com www.thetonechamber.com Our new exclusive Tone Chamber is the only place where you can try EVERY Eminence guitar speaker with YOUR guitar and YOUR amp. By using our custom designed switching system, you can instantly compare all 27 Eminence guitar speakers. You can even demo two different speakers at once for a blended tone. Pick Your Tone! Call Today to reserve your time in the Tone Chamber! Conveniently located just south of Chicago on I-57.

AMERICAN STANDARD Each Eminence American Standard model can be identified by its economical Stamped Steel chassis. Although more affordable than cast aluminum, these frames provide an excellent and versatile chassis. We coat the basket and all metal parts with an epoxy-acrylic finish. Our in-house e-coat process lets us control the thickness of that coating to within 0.001. That s the diameter of a human hair and it s critical when working with close tolerance transducer motor designs. We then add front and rear sealing gaskets on each model to allow front or rear loading. There are 24 unique models available in our American Standard series so it s easy to find yours. Each is designed for versatility in a range of applications. And like our Professional series, every speaker comes standard with Made in the USA pride, and is backed by a Seven Year Warranty against manufacturer s defects*. There are over 1,200 USA dealers and distributors worldwide. Visit www.eminence.com to find a dealer near you. *Warranty policy may vary outside of the continental United States and Canada. Check with your local distributor for warranty details. The Eminence mission statement is Quality, Value, and Service to Meet Our Customer s Needs. From stage to studio and even the highway, our speakers speak for this mission. Eminence offers 6.5-15 models with applications ranging from standard sub-woofers, two-way enclosures, and coaxials, to truncated line array models, monitor woofers, and high performance midranges setting records for output in car audio. No other loudspeaker line provides more choices, power handling, performance, and reliability for the price. 18

compatibility closed box reflex box horn loading subwoofer usage woofer usage mid bass usage midrange usage alpha 6a j j j j j j alpha 6c j j j j j j la6 cbmr j j alpha 8a j j j j j alpha 8mra j j beta 8a j j j j j j beta 8cx j j j j j alpha 10a j j j j j j beta 10a j j j j j beta 10cx j j j j j delta 10a j j j j j delta 10b j j j j j alpha 12a j j j j j beta 12a j j j j j beta 12cx j j j j j beta 12lta j j j j j delta 12a j j j j delta 12b j j j j delta 12lfa j j j j j j DELTA 12LFC j j j j j kappa 12a j j j j j alpha 15a j j j j j beta 15a j j j j delta 15a j j j j delta 15b j j j j delta 15lfa j j j j gamma 15a j j j j kappa 15a j j j j kappa 15c j j j j kappa 15lfa j j j j 19

AMERICAN STANDARD SERIES ALPHA-6A LA6-CBMR ALPHA-8A SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details ALPHA-6A 6.5, 165mm 8 or 4 ohms 100W 200W 118Hz 85Hz-6kHz 93.6 20 oz. 0.25, 6.35mm 1.5, 38.1mm 118Hz 7.2 0.19mH 5.68 0.60 0.54 5.8 liters / 0.2 cu.ft. 44cc 0.26mm/N 8.0 T-M 7 grams 197 3.5mm 126.7 cm2 4.0mm 2.8-5.7 liters/0.1-0.2 cu.ft. 3.4-15.6 liters/0.12-0.55 cu.ft. 25 cu.in / 0.41 liters 6.59, 167.4mm 5.69, 144.5mm 0.23, 5.7mm 6.06, 154mm 2.8, 71mm 4.1 lbs., 1.9 kg 4.8 lbs., 2.2 kg Vented and extended core LA6-CBMR 6.5, 165mm 150W 300W 460Hz 500Hz-5.4kHz 97.8 38 oz. 0.31, 7.92mm 1.5, 38.1mm 460Hz 6.3 0.33mH 3.13 1.24 0.89 0.4 liters / 0.01 cu.ft. 2.7cc 0.01mm/N 11.1 T-M 9 grams 371 0.2mm 133.1 cm2 0.8mm 38.1 cu.in / 0.62 liters 6.59, 167mm/Width across flats: 6, 152mm 5.65, 143.5mm 0.23, 5.7mm 6.06, 154mm 2.77, 70mm 6.7 lbs., 3 kg 7.2 lbs., 3.3 kg Vented and extended core ALPHA-8A 8, 203.2mm 125W 250W 73Hz 58Hz-5kHz 94 20 oz. 0.25, 6.35mm 1.5, 38.1mm 73Hz 5.3 0.44mH 4.6 0.68 0.59 17.7 liters / 0.6 cu.ft. 67cc 0.28mm/N 7.8 T-M 17 grams 107 3.2mm 210.0 cm2 7.1mm 5-7 liters/0.18-0.25 cu.ft. 16.7-25.5 liters/0.59-0.90 cu.ft. 35.3 cu.in / 0.58 liters 8.24, 209.2mm 7.13, 181mm 0.22, 5.5mm 7.75, 196.9mm 3.25, 83mm 4.3 lbs., 1.9 kg 5.1 lbs., 2.3 kg Vented core Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition with truncated sides 20 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

ALPHA-8MRA BETA-8A BETA-8CX ALPHA-10A ALPHA-8MRA BETA-8A BETA-8CX 8, 203.2mm 8, 203.2mm 8, 203.2mm ALPHA-10A 10, 254mm 125W 250W 514Hz 400Hz-4.8kHz 100.9 20 oz. 0.25, 6.35mm 1.5, 38.1mm 225W 450W 65Hz 78Hz-4.5kHz 95.1 34 oz. 2, 50.8mm 250W 500W 63Hz 74Hz-20kHz 93.3 38 oz. 0.313, 7.94mm 2, 50.8mm 150W 300W 50Hz 57Hz-4.5kHz 95.6 20 oz. 0.25, 6.35mm 1.5, 38.1mm 514Hz 7.32 0.34mH 4.48 2.08 1.42 0.8 liters / 0.03 cu.ft. 0cc 0.01mm/N 8.9 T-M 6.9 grams 247 1.6mm 205.9 cm2 3.0mm 65Hz 5.99 0.49mH 4.95 0.42 0.38 23.3 liters / 0.82 cu.ft. 63cc 0.37mm/N 9.6 T-M 16 grams 156 3.0mm 210.0 cm2 7.4mm 63Hz 5.6 0.85mH 8.82 0.34 0.33 19.99 liters /.71 cu.ft. 67.20cc 0.32mm/N 11.1 T-M 18.3 grams 193.1 3.2mm 210.0 cm2 6.9mm 50Hz 5.31 0.66mH 5.21 0.66 0.59 82.2 liters / 2.9 cu.ft. 114cc 0.46mm/N 7.5 T-M 22 grams 76 3.2mm 355.4 cm2 9.1mm 35.3 cu.in / 0.58 liters 8.22, 208.8mm 7.19, 182.5mm 0.22, 5.5mm 7.75, 196.9mm 3.25, 83mm 4.4 lbs., 2 kg 5.1 lbs., 2.3 kg 5.7-9.9 liters/0.2-0.35 cu.ft. 8.5-19 liters/0.3-0.67 cu.ft. 46.3 cu.in / 0.76 liters 8.24, 209.2mm 7.13, 181mm 0.22, 5.5mm 7.75, 196.9mm 3.5, 89mm 6.6 lbs., 3 kg 7.4 lbs., 3.4 kg 3-10 liters/ 0.1-0.4 cu.ft. 8-21 liters/0.3-0.8 cu.ft. 48.4 cu.in / 0.79 liters 8.24, 209.3mm 7.13, 181.1mm 0.22, 5.6mm 7.75, 196.9mm 3.5, 88.9mm 6.8 lbs., 3.1 kg 7.5 lbs., 3.4 kg 8.5-11.3 liters/0.3-0.4 cu.ft. 28.3-53.8 liters/1.0-1.9 cu.ft. 58.1 cu.in / 0.95 liters 10.11, 256.8mm 9.13, 231.8mm 0.23, 5.7mm 9.6, 243.8mm 3.90, 99mm 4.5 lbs., 2 kg 5.6 lbs., 2.5 kg Vented core Aluminum voice coil Vented core Kapton former Tapered Coax Vented and extended core with closed back Treated Sealed WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 21

AMERICAN STANDARD SERIES BETA-10A BETA-10CX DELTA-10A SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details BETA-10A BETA-10CX DELTA-10A 10, 254mm 250W 500W 53Hz 51Hz-3.8kHz 97 34 oz. 2, 50.8mm 53Hz 5.75 0.67mH 8.14 0.52 0.49 60.1 liters / 2.1 cu.ft. 102cc 0.36mm/N 9.6 T-M 25 grams 103 3.0mm 344.9 cm2 8.6mm 8.5-14.2 liters/0.3-0.5 cu.ft. 19.8-70.8 liters/0.7-2.5 cu.ft. 69.1 cu.in / 1.13 liters 10.11, 256.8mm 9.13, 231.8mm 0.23, 5.7mm 9.6, 243.8mm 3.98, 101mm 6.8 lbs., 3.1 kg 7.8 lbs., 3.6 kg Aluminum voice coil Vented core 10, 254mm 250W 500W 48Hz 58Hz-20kHz* 95.1 38 oz. 2, 50.8mm 48Hz 5.53 0.75mH 5.21 0.43 0.39 64.2 liters / 2.3 cu.ft. 173cc 0.39mm/N 10.4 T-M 27 grams 114 5.0mm 344.9 cm2 7.6mm 14.2-19.8 liters/0.5-0.7 cu.ft. 15.6-85 liters/0.55-3 cu.ft. 71.3 cu.in / 1.17 liters 10.08, 256.1mm 9.05, 229.7mm 9.66, 245.4mm 3.98, 101mm 7.3 lbs., 3.3 kg 8.4 lbs., 3.8 kg Vented and extended core 10, 254mm 8 or 16 ohms 350W 700W 66Hz 63Hz-3.7kHz 98.8 56 oz. 0.375, 9.53mm 2.5, 63.5mm 66Hz 5.42 0.74mH 6.53 0.35 0.33 30.5 liters / 1.1 cu.ft. 121cc 0.18mm/N 14.4 T-M 32 grams 189 3.5mm 344.9 cm2 9.4mm 12.7-37.9 liters/0.45-1.34 cu.ft. 86.5 cu.in / 1.42 liters 10.09, 256.2mm 9.05, 229.7mm 9.66, 245.4mm 4.25, 108mm 10.8 lbs., 4.9 kg 12 lbs., 5.4 kg Aluminum voice coil Vented core Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Screened cloth dust cap 22 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

ALPHA-12A BETA-12A-2 BETA-12CX BETA-12LTA ALPHA-12A BETA-12A-2 BETA-12CX BETA-12LTA 150W 300W 49Hz 51Hz-4.3kHz 95.6 20 oz. 0.25, 6.35mm 1.5, 38.1mm 250W 500W 47Hz 43Hz-3.8kHz 98 38 oz. 2, 50.8mm 250W 500W 47Hz 66Hz-20kHz* 96.4 38 oz. 2, 50.8mm 225W 450W 45Hz 48Hz-8kHz 97.7 38 oz. 2, 50.8mm 49Hz 6.3 0.79mH 6.53 0.88 0.77 121.5 liters / 4.3 cu.ft. 125cc 0.32mm/N 8.5 T-M 33 grams 56 2.4mm 519.5 cm2 6.6mm 47Hz 5.0 0.64mH 6.00 0.50 0.46 120.1 liters / 4.2 cu.ft. 237cc 0.29mm/N 10.8 T-M 40 grams 94 4.4mm 538.9 cm2 11mm 47Hz 5.57 1.01mH 6.69 0.51 0.48 161 liters / 5.7 cu.ft. 186cc 0.40mm/N 10.0 T-M 34 grams 84 3.5mm 532.4 cm2 10.4mm 45Hz 7.37 0.83mH 6.44 0.55 0.51 136.3 liters / 4.8 cu.ft. 170cc 0.34mm/N 11.7 T-M 36 grams 82 3.2mm 532.4 cm2 8.0mm 17-22.7 liters/0.6-0.8 cu.ft. 56.6-113.3 liters/2-4 cu.ft. 108.9 cu.in / 1.78 liters 12.26, 311.4mm 11, 279.5mm 11.71, 297.5mm 4.73, 120mm 5.3 lbs., 2.4 kg 7.4 lbs., 3.4 kg 25.5-35.4 liters, 0.9-1.25 cu.ft. 36.8-139 liters/1.3-4.9 cu.ft. 122 cu.in / 2 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.3mm 4.57, 116mm 7.5 lbs., 3.4 kg 9.7 lbs., 4.4 kg 42.5-28 liters/1-1.5 cu.ft. 37-71 liters/1.3-2.5 cu.ft. 122 cu.in / 2 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.3mm 4.47, 114mm 7.8 lbs., 3.5 kg 10 lbs., 4.5 kg 14-51 liters/0.5-1.8 cu.ft. 56.6-116 liters/2-4.1 cu.ft. 122 cu.in / 2 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.3mm 4.47, 114mm 8.1 lbs., 3.7 kg 10.2 lbs., 4.6 kg Vented and extended core Vented and extended core Extended core Vented core Solid composition felt dust cap Screened cloth dust cap WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 23

AMERICAN STANDARD SERIES DELTA-12A DELTA-12LFA DELTA-12LFC SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details DELTA-12A DELTA-12LFA DELTA-12LFC 8 or 16 ohms 400W 800W 55Hz 54Hz-5kHz 98.3 56 oz. 0.375, 9.53mm 2.5, 63.5mm 55Hz 6.3 0.74mH 5.27 0.46 0.43 81.3 liters / 2.9 cu.ft. 125cc 0.21mm/N 13.5 T-M 39 grams 120 2.4mm 519.5 cm2 9.9mm 25.5-85 liters/0.9-3 cu.ft. 137.3 cu.in / 2.25 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.3mm 5.35, 136mm 11.4 lbs., 5.2 kg 13.5 lbs., 6.1 kg Aluminum voice coil Vented core 500W 1000W 51Hz 44Hz-3kHz 94.6 56 oz. 0.375, 9.53mm 2.5, 63.5mm 51Hz 6.06 1.45mH 7.28 0.51 0.47 67.9 liters / 2.4 cu.ft. 243cc 0.19mm/N 14.1 T-M 51 grams 100 4.8mm 506.7 cm2 13.5mm 19.8-28 liters/0.7-1.0 cu.ft. 25.5-102 liters/0.9-3.6 cu.ft. 137.3 cu.in / 2.25 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.3mm 5.35, 136mm 11.8 lbs., 5.4 kg 14 lbs., 6.4 kg Vented and extended core 4 ohms 500W 1000W 52Hz 45Hz-2.3kHz 93.1 56 oz. 0.375, 9.53mm 2.5, 63.5mm 52Hz 3.2.94mH 8.21.47.44 63.7 liters / 2.3 cu.ft. 249cc 0.17mm/N 10.9 T-M 53 grams 111.4 4.8mm 519.5 cm2 13.5mm 21-74 liters/0.7-2.6 cu.ft. 28-110 liters/1.0-3.9 cu.ft. 137.3 cu.in / 2.25 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.4mm 5.88, 149.35mm 11.8 lbs., 5.4 kg 14 lbs., 6.4 kg Kapton Vented and extended core Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Solid composition felt dust cap Treated 24 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

KAPPA-12A ALPHA-15A BETA-15A DELTA-15A KAPPA-12A ALPHA-15A BETA-15A DELTA-15A 15, 381mm 15, 381mm 15, 381mm 8 or 16 ohms 450W 900W 45Hz 62Hz-4.2kHz 99.3 80 oz. 0.375, 9.53mm 3, 76.2mm 200W 400W 41Hz 46Hz-3.5kHz 97 25 oz. 0.25, 6.35mm 1.5, 38.1mm 300W 600W 35Hz 45Hz-3.7kHz 98.2 34 oz. 2, 50.8mm 400W 800W 40Hz 48Hz-4kHz 100 56 oz. 0.375, 9.53mm 2.5, 63.5mm 45Hz 5.41 0.77mH 7.76 0.28 0.27 112.1 liters / 4.0 cu.ft. 166cc 0.30mm/N 15.2 T-M 42 grams 161 3.2mm 519.5 cm2 11.5mm 41Hz 5.88 0.84mH 7.23 1.53 1.26 260.0 liters / 9.2 cu.ft. 325cc 0.25mm/N 7.7 T-M 59 grams 27 3.8mm 856.3 cm2 8.4mm 35Hz 6.32 1.10mH 8.10 0.63 0.58 334.6 liters / 11.8 cu.ft. 330cc 0.35mm/N 11.5 T-M 60 grams 56 4.0mm 823.7 cm2 11.6mm 40Hz 6.3 0.64mH 8.05 0.57 0.53 270.7 liters / 9.56 cu.ft 233cc 0.26mm/N 13.2 T-M 62 grams 70 2.7mm 864.6 cm2 11.1mm 34-62 liters/1.2-2.2 cu.ft. 155.5 cu.in / 2.55 liters 12.26, 311.4mm 11.0, 279.5mm 11.71, 297.5mm 5.63, 143mm 14.9 lbs., 6.8 kg 17.9 lbs., 8.2 kg 71-85 liters/2.5-3 cu.ft. 106-177 liters/3.75-6.25 cu.ft. 195.9 cu.in / 3.21 liters 15.15, 384.8mm 13.77, 349.6mm 14.56, 369.9mm 5.83, 148mm 6.7 lbs., 3 kg 8.8 lbs., 4 kg 45-62 liters/1.6-2.2 cu.ft. 99-175.6 liters/3.5-6.2 cu.ft. 203.3 cu.in / 3.33 liters 15.15, 384.8mm 13.77, 349.6mm 14.56, 369.9mm 6.05, 154mm 8.8 lbs., 4 kg 10.8 lbs., 4.9 kg 37-42.5 liters/1.3-1.5 cu.ft. 82-161.4 liters/2.9-5.7cu.ft. 220.8 cu.in / 3.62 liters 15.15, 384.8mm 13.77, 349.6mm 14.56, 369.9mm 6.05, 154mm 12.3 lbs., 5.6 kg 14.4 lbs., 6.5 kg Aluminum voice coil Vented core Vented and extended core Vented and extended core Aluminum voice coil Vented core WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 25

AMERICAN STANDARD SERIES DELTA-15LFA GAMMA 15A-2 KAPPA-15A SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details DELTA-15LFA 15, 381mm 500W 1000W 39Hz 42Hz-3.2kHz 96 56 oz. 0.375, 9.53mm 2.5, 63.5mm 39Hz 6.11 1.37mH 6.3 0.52 0.48 241.0 liters / 8.51 cu.ft. 419cc 0.23mm/N 14.6 T-M 75 grams 75 4.8mm 873.0 cm2 16.5mm 36.8-42.5 liters/1.3-1.5 cu.ft. 85-167 liters/3-5.9 cu.ft. 220.8 cu.in / 3.62 liters 15.15, 384.8mm 13.77, 349.6mm 14.56, 369.9mm 6.3, 160mm 12.8 lbs., 5.8 kg 14.8 lbs., 6.7 kg Vented and extended core GAMMA 15A-2 15, 381mm 300W 600W 33Hz 48Hz-3.3kHz 98.6 59 oz. 2, 50.8mm 33Hz 5.98 1.73mH 5.13 0.32 0.30 314.1 liters / 11.1 cu.ft. 257cc 0.31mm/N 17.2 T-M 78 grams 103 3.0mm 856.3 cm2 11.8mm 40-136 liters/1.4-4.8 cu.ft. 220.8 cu.in / 3.62 liters 15.15, 384.8mm 13.77, 349.6mm 14.56, 369.9mm 5.94, 151mm 11.8 lbs., 5.4 kg 14.1 lbs., 6.4 kg Aluminum voice coil Vented core KAPPA-15A 15, 381mm 8 or 4 ohms 450W 900W 33Hz 52Hz-2.3kHz 100.5 80 oz. 0.375, 9.53mm 3, 76.2mm 33Hz 5.22 1.05mH 8.90 0.33 0.32 321.3 liters / 11.35 cu.ft. 343cc 0.31mm/N 15.7 T-M 76 grams 98 4.0mm 856.3 cm2 11.6mm 45-113 liters/1.6-4 cu.ft. 239 cu.in / 3.92 liters 15.16, 384.9mm 13.77, 349.6mm 14.56, 369.9mm 6.13, 156mm 17.6 lbs., 8 kg 19.8 lbs., 9 kg Vented core Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition 26 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

HF PRODUCTS & COMPONENTS KAPPA-15LFA KAPPA-15LFA 15, 381mm 600W 1200W 39Hz 38Hz-2.7kHz 99 95 oz. 0.375, 9.53mm 3, 76.2mm 39Hz 5.4 1.27mH 6.08 0.41 0.38 159.0 liters / 5.6 cu.ft. 471cc 0.15mm/N 18.6 T-M 105 grams 95 5.5mm 856.3 cm2 10.4mm No loudspeaker system or musical performance is complete without high quality, durable HF devices, well-designed horns, and high-performance crossovers. Whether for use in Eminence loaded cabinets or an upgrade to an existing system, Eminence HF drivers achieve extraordinary levels of audio performance. Add to that the same unrivaled durability you ve come to expect from Eminence bass and midrange transducers, and you ve got true professional value. The Eminence assortment of horns is engineered to provide the perfect compliment to Eminence HF drivers. Each horn is manufactured from the highest quality materials to obtain a balance of strength, durability, and weight savings. Eminence Professional Series crossovers are technically superior passive filters available in board-only or cabinet-ready configurations. Our high-pass protection circuits center around custom manufactured aerospace lamps, working as positive temperature coefficient series varistors to protect your HF device without introducing distortion. From low-pass and high-pass filters, to two-way and three-way units with multiple crossover point options, and L-PADs for more custom HF level control, there is an Eminence crossover solution to meet your needs. 62-193 liters/2.2-6.8 cu.ft. 251.7 cu.in / 4.12 liters 15.16, 384.9mm 13.77, 349.6mm 14.56, 369.9mm 6.38, 162mm 20 lbs., 9.1 kg 22.3 lbs., 10.1 kg NEW: 2 throat H2EA Horn Flare The H2EA is a rugged, cast aluminum 2 throat horn, incorporating an exponential flare for optimized acoustic loading and energy transfer. Its compact size makes it ideal for sound reproduction in small, medium, and large-size venues. See page 29 for more information. Vented core BUYEMINENCE.COM Your B2B Loudspeaker Super Store!

drivers SPECIFICATION Throat Size Nominal Impedance* Power Rating** Resonance Usable Frequency Range Recommended Crossover Sensitivity*** Magnet Weight Voice Coil Diameter Diaphragm Material Re MOUNTING INFORMATION Overall Diameter Depth Weight Mounting Thread ASD:1001 1", 25.4mm 50W @ 2.5kHz 1.23kHz 2.5kHz-20kHz 2.5kHz/18dB 104.3dB 12 oz,.34 kg 1.3", 33mm Diamond Titanium 6.7 3.5", 88.9mm 2.45", 62mm 2 lbs / 0.9 kg 1 3/8" 18 NEF ext. APT:50 1", 25.4mm 45W @ 3.5kHz, 85Wrms @5kHz 1.6kHz 3.5Hz-20kHz 3.5kHz 104dB 7.75 oz,.22 kg 1.0"/25.4mm Phenolic 6.3 2.75", 70mm 2.5", 63.5mm 1.63 lbs /0.74 kg 1 3/8 18 NEF ext. for mounting on coaxial speakers or screw-on horns. SPECIFICATION Throat Size Nominal Impedance* Power Rating** Resonance Usable Frequency Range Recommended Crossover Sensitivity*** Magnet Weight Voice Coil Diameter voice coil former Diaphragm Material Re MOUNTING INFORMATION Overall Diameter Depth Weight Mounting Holes Diameter Mounting Holes B.C.D. Mounting Thread NSD:2005 PSD:2002 PSD:3006 1", 25.4mm 8 or 16 ohms 50W 578Hz 1.5kHz-20kHz 1.5kHz/12dB 108.4dB 4.16 oz 2", 51mm Polyimide Titanium 6.8 3.87", 98.3mm 1.75", 44mm 2 lbs / 0.9 kg 2X 1/4-20 3" 1 3/8" 18 NEF ext. Multiple units exceeding published rating evaluated under AES noise source and tested standard while mounted on the H290 horn in a non-temperature controlled environment. 1", 25.4mm 8 or 16 ohms 80W 540Hz 1.2kHz-20kHz 1.2kHz/18dB or 1.8kHz/12dB 106.1dB 34 oz 2", 51mm Polyimide Titanium 6.1 5.25", 133mm 2.2", 56mm 5 lbs, Gross 5.76 lbs 2X 1/4-20 or 3x M6 3" or 2.25" 1 3/8" 18 NEF ext. 2", 50.8mm 100W 470Hz 800Hz-20kHz See Power Rating ****** 109dB @ 1W/1m across 800Hz-20kHz on axis on h2ea horn 80 oz 3", 76.2mm Polyimide Titanium w/geodesic Design for Increased Strength and Stiffness 4. 7.9", 200.7mm 3.1", 78.7mm 13.5 lbs / 6.12 kg #4 (1/4-20) 4", 101.6mm The NSD:2005 and PSD:2002 drivers are available in either screw-on or bolt-on formats. Please specify your preferences when ordering. The PSD:3006 is bolt-on only. 28 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

SUPERTWEETER options Dispersion Dimensions Cut-out Depth Weight APT:80 APT:150 APT:200 80 Conical 100 x 50 90 x 90 3.4"x3.4", 87mm x 87mm 7.5"x4.5", 191mm x 114mm 5.9"x5.9", 150mm x 150mm 3.15", 80mm 6.7" x 3.4", 170mm x 86mm 4.25"x4.5", 108mm x 114 2.9", 73.6mm 4.5", 114.3mm 5.1", 129.5mm 1.6 lbs, 727 grams 2 lbs, 909 grams 2.5 lbs, 1136 grams APT:3 ADAPTOR B2S ADAPTOR TOP HAT-CH Apt:3 Adaptor converts the APT:50 to 1 3/8" 18 NEF ext. for mounting on coaxial speakers or screw-on horns. HORN FLARES Converts bolt-on driver to accept a screw-on horn. 2x 1/4-20 or 3x M6 driver to 1 3/8 18NEF ext. horn. Adjustable-angle speaker stand receptacle for loudspeaker boxes. Vertical angle can be adjusted in 4º increments to +/- 18º. Fits SPS56B and most other standard speaker stands. Internal Ø 36mm. Black Polyamide. Patent pending. SPECIFICATION Type Throat Size Dispersion Lowest Rec. Crossover Width/Height/Depth Width/Height/Depth (mm) Cut-out Weight H290 H290S H295 H395 Radial Radial Constant Directivity Constant Directivity 1", 25mm 1", 25mm 1", 25mm 1", 25mm 90 x 40 90 x 40 90 x 40 90 x 40 1kHz 1kHz 1kHz 1kHz 11.4" x 6.5" x 5.9" 11.7" x 6.6" x 6.6" 12.1" x 6" x 4" 15.6" x 7.3" x 6.1" 290 x 165 x 150mm 297 x 168 x 168mm 307 x 152 x 102mm 396 x 185 x 155mm 10.3" x 4.9", 260 x 126mm 9.7" x 4.9", 246 x 124mm 10.5" x 4.3", 267 x 109mm 13.9" x 5.9", 355 x 150mm 1.8 lbs, 818 grams 1.1 lbs, 500 grams 1.3 lbs, 591 grams 1.8 lbs, 818 grams SPECIFICATION Type Throat Size Dispersion Lowest Rec. Crossover Width/Height/Depth Width/Height/Depth (mm) Cut-out Weight SST1 LT250 H2EA BH410 Constant Directivity Constant Directivity Exponential Exponential 1", 25mm 1", 25mm 2", 51mm 1", 25mm 90 x 40 60 x 40 60 x 40 60 x 60 1kHz 1kHz 700Hz 1kHz 9.8" x 7.7" x 5.2" 6.7" x 6.4" x 4.2" 12.4" x 7.3" x 6.1" 5.59" x 5.59" x 4.38" 249 x 196 x 132mm 170 x 163 x 107mm 315 x 185 x 155mm 141.9 x 141.9 x 111.2mm 8.5" x 6.4", 216 x 163mm 5.4" x 5.2", 137 x 132mm 11.3" x 6.3", 287 x 160mm 3.56" x 3.56", 90.4 x 90.4mm 1.7 lbs, 773 grams 0.8 lbs, 364 grams 4.9 lbs, 2.24 kg.35 lbs, 159 grams WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 29

The Tone is in the Details. high-quality materials. crafted to perform and endure. www.eminence.com MADE IN THE USA

crossovers SPECIFICATION Type Cabinet Ready* Crossover Frequency Slope PX:250 PXB:250 PXB:500 PXB:1k6 PXB:3k5 PXB:5k0 Low-Pass Low-Pass Low-Pass High-Pass High-Pass High-Pass Yes No No No No No 250Hz 250Hz 500Hz 1.6kHz 3.5kHz 5kHz 12dB/octave 12dB/octave 12dB/octave 18dB/octave 18dB/octave 18dB/octave Butterworth Butterworth Butterworth Butterworth Butterworth Butterworth Impedance Power Handling 600W 600W 600W 400W 400W 400W HF Level Mounting Cut-out 3.875" x 6" Mounting Cut-out (mm) 98.4 x 152.4mm SPECIFICATION Type Cabinet Ready* Crossover Frequency Slope PX2:1k6 PX2:3k5 PX2:5k0 PXB2:500 PXB2:800 PXB2:1k6 2-way 2-way 2-way 2-way 2-way 2-way Yes Yes Yes No No No 1.6kHz 3.5kHz 5kHz 500Hz 800Hz 1.6kHz 12dB/octave LP 12dB/octave LP 12dB/octave LP 12dB/octave LP 12dB/octave LP 12dB/octave LP 18dB/octave HP 18dB/octave HP 18dB/octave HP 18dB/octave HP 18dB/octave HP 18dB/octave HP Butterworth Butterworth Butterworth Butterworth Butterworth Butterworth Impedance Power Handling HF Level Mounting Cut-out Mounting Cut-out (mm) 400W 9dB 3.875" x 6" 98.4 x 152.4mm 400W 9dB 3.875" x 6" 98.4 x 152.4mm 400W 9dB 3.875" x 6" 98.4 x 152.4mm 400W 400W 400W SPECIFICATION Type Cabinet Ready* Crossover Frequency Slope Impedance Power Handling PXB2:2k5 CX PXB2:3k5 PXB2:5k0 PXB3:1k6 PXB3:3k5 PXB3:5k0 2-way 2-way 2-way 3-way 3-way 3-way No No No No No No 2.5kHz 3.5kHz 5kHz 500Hz/1.6kHz 500Hz/3.5kHz 500Hz/5kHz 12dB/octave LP 12dB/octave LP 12dB/octave LP 12dB/octave LP 12dB/octave LP 12dB/octave LP 12dB/octave HP 18dB/octave HP 18dB/octave HP 6dB/octave MP 6dB/octave MP 6dB/octave MP Custom Butterworth Butterworth 18dB/octave HP 18dB/octave HP 18dB/octave HP Butterworth Butterworth Butterworth 250W 400W 400W 400W 400W 400W PX-LPAD Type: L-Pad Cabinet Ready: Yes Impedance: Power Handling: 100W WWW.EMINENCE.COM **Picture at top of page shows Cabinet-ready PX crossover (left) and Board-only PX crossover (right). * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 31

GUITAR speakers Whether it s changing pickups, a new stomp-box or holding your tongue just right, guitarists are always looking for ways to get that tone. Here s a fact - the most overlooked tool in the tone toolbox is the loudspeaker. Nothing short of changing amplifiers or guitars can make such a difference in your tone. The guitar amp speaker is the last element in the tone chain connecting your sound to the audience. It affects your overall coloration, articulation, low-end, midrange, highs, shape and extension, and ability to cut through any mix. The right speaker can offer you a deep, rich mellow flavor; an articulate, percussive and driving clean sound; or a growling, howling guitar on fire. Along with your rig and your style, your speaker provides a tonal palette that only you can imagine. It s never been easier to Pick Your Sound. The Eminence Tone Center, consisting of a 4x12 cabinet loaded with four uniquely voiced guitar speakers and a foot switch, finally offers the consumer the ability to play through a selection of speakers by plugging in any amplifier of their choice. With full color graphics and product information cards for each model, this retail display makes a consumer s purchase decision easy. Eminence offers you over 30 unique specifications for Acoustic and Electric Guitar amps. We have a tone that s right for you and your rig. A tone that only you can call your own. Our speakers are made for the working musician. With a seven-year warranty inside the continental United States, the pride of being Made in the USA, and a price that s as easy to handle as a 12-bar blues line. EMINENCE.COM Proudly presenting the ultimate solution for comparative evaluation of guitar speakers. Log on today to review our guitar speaker TONE GUIDE & SOUND CLIPS.

take control of your tone with eminence. Now available from EMINENCE! The MAVERICK and REIGNMAKER with patent-pending FDM Technology have put a new twist on guitar tone. Turning the modulator knob gives you complete control over the speaker s output level, associated distortion, and tonal balance, helping you find that sweet spot of saturated tube tone but at a significantly lower volume. dbspl 110 105 100 95 90 85 A 300 knob turn offers warmer tones and nearly 9 db of attenuation. Tweak the knob for a wide range of tones: More attenuation affords a warmer tone while less attenuation restores volume and brightness. 80 75 70 50 Hz 100 200 500 1K 2K 5K 10K No Turn 1/4 Turn 1/2 Turn 3/4 Turn Full Turn www.eminence.com

Acoustic ACOUSTINATOR CX2008 ACOUSTINATOR NH2008 ACOUSTINATOR N2012 SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details ACOUSTINATOR CX2008 8, 203.2mm 200W 400W 57Hz 60Hz-3.5kHz 90.8 38 oz. 2, 50.8mm 57Hz 5.4 0.62mH 9.8 0.40 0.39 21.5 liters / 0.76 cu.ft. 64cc 0.33mm/N 10.7 T-M 24 grams 143 3.0mm 214.1 cm2 6.0mm 11-14 liters/ 0.38-0.48 cu.ft. 11-31 liters/ 0.4-1.1 cu.ft. 48.4 cu.in / 0.79 liters 8.24, 209.2mm 7.13, 181mm 0.22, 5.5mm 7.75, 196.9mm 3.6, 92mm 6.7 lbs., 3 kg 7.4 lbs., 3.4 kg Tapered coax core ACOUSTINATOR NH2008 8, 203.2mm 150W 300W 47Hz 60Hz-3.3kHz 94.5 4 oz. 0.28, 7.2mm 2, 50.8mm 47Hz 5.4 0.44mH 6.5 0.29 0.28 34 liters / 1.19 cu.ft. 76cc 0.50mm/N 11.2 T-M 23 grams 162 3.5mm 218.2 cm2 8.0mm 8-9.3 liters/ 0.28-0.33 cu.ft. 12-25.5 liters/ 0.41-0.9 cu.ft. 28.6 cu.in / 0.47 liters 8.24, 209.2mm 7.13, 181mm 0.22, 5.5mm 7.75, 196.9mm 3.6, 92mm 3.2 lbs., 1.5 kg 3.9 lbs., 1.8 kg Neodymium magnet ACOUSTINATOR N2012 150W 300W 31Hz 40Hz-3.5kHz 94.7 4 oz. 0.28, 7.2mm 2, 50.8mm 31Hz 7.03 0.59mH 12.92 0.54 0.52 177 liters / 6.25 cu.ft. 203cc 0.46mm/N 12.1 T-M 57 grams 57 3.9mm 519.5 cm2 8.0mm 28-50 liters/ 1-1.75 cu.ft. 59.5-85 liters/ 2.1-3 cu.ft. 102.2 cu.in / 1.67 liters 12.26, 311.4mm 11, 279.5mm 11.71, 297.5mm 5.1, 130mm 4.3 lbs., 2 kg 6 lbs., 2.7 kg Neodymium magnet Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Polypropylene Cone Rubber cone edge Hemp Cone ô Santoprene cone edge Solid composition felt dust cap Polypropylene Cone Santoprene cone edge Solid composition felt dust cap 34 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

LEGEND 1028K LEGEND 1058 LEGEND 1218 LEGEND GB128 LEGEND 1028K LEGEND 1058 LEGEND 1218 LEGEND GB128 10, 254mm 10, 254mm 8 or 16 ohms 35W 95Hz 100Hz-5.5kHz 97.4 6 oz. 0.25, 6.2mm 1, 25.4mm 75W 97Hz 100Hz-6kHz 98.7 16 oz. 0.25, 6.35mm 1.5, 38.1mm 150W 100Hz 80Hz-4.2kHz 98.8 38 oz. 2, 50.8mm 50W 86Hz 80Hz-5.1kHz 101.4 38 oz. 1.75, 44.5mm 95Hz 5.8 0.51mH 17.96 1.61 1.47 31.5 liters / 1.1 cu.ft. 72cc 0.19mm/N 5.7 T-M 15 grams 59 2.1mm 344.9 cm2 97Hz 7.49 0.56mH 17.78 1.21 1.13 26.4 liters / 0.9 cu.ft. 0cc 0.16mm/N 8.0 T-M 17 grams 80 0.0mm 344.9 cm2 100Hz 6.95 0.69mH 15.51 0.95 0.89 31.2 liters / 1.1 cu.ft. 41cc 0.09mm/N 11.6 T-M 29 grams 105 0.8mm 506.7 cm2 86Hz 6.37 0.64mH 19.54 0.67 0.65 43.9 liters / 1.6 cu.ft. 41cc 0.12mm/N 12.0 T-M 28 grams 128 0.8mm 506.7 cm2 46.7 cu.in / 0.77 liters 10.11, 256.8mm 9.05, 229.9mm 0.22, 5.6mm 9.6, 243.8mm 4.8, 122mm 2.9 lbs., 1.3 kg 4 lbs., 1.8 kg 56.5 cu.in / 0.93 liters 10.11, 256.8mm 9.13, 231.8mm 0.23, 5.7mm 9.6, 243.8mm 4.1, 104mm 4.4 lbs., 2 kg 5.4 lbs., 2.5 kg 122 cu.in / 2 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.3mm 4.5, 114mm 8.4 lbs., 3.8 kg 10.6 lbs., 4.8 kg 122 cu.in / 2 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.3mm 6.06, 154mm 8.1 lbs., 3.7 kg 10.1 lbs., 4.6 kg Alnico magnet Paper former Solid composition felt dust cap Solid composition felt dust cap WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 35

LEGEND V128 LEGEND 1258 LEGEND 1518 SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details LEGEND V128 120W 89Hz 80Hz-5kHz 100.9 38 oz. 1.75, 44.5mm 89Hz 6.37 0.64mH 11.98 0.83 0.77 39.4 liters / 1.4 cu.ft. 42cc 0.10mm/N 11.5 T-M 30 grams 107 0.8mm 519.5 cm2 122 cu.in / 2 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.3mm 6.06, 154mm 8.1 lbs., 3.7 kg 10.1 lbs., 4.6 kg LEGEND 1258 LEGEND 1518 15, 381mm 75W 150W 94Hz 82Hz 80Hz-4kHz 60Hz-4kHz 100.1 102.2 34 oz. 59 oz. 1.5, 38.1mm 2, 50.8mm 94Hz 82Hz 7.44 7.16 0.70mH 0.86mH 6.15 10.12 1.18 1.02 0.99 0.93 32.5 liters / 1.2 cu.ft. 65.4 liters / 2.3 cu.ft. 24cc 66cc 0.09mm/N 0.07mm/N 10.9 T-M 14.1 T-M 32 grams 55 grams 80 80 0.5mm 0.8mm 506.7 cm2 823.7 cm2 119.9 cu.in / 1.96 liters 220.8 cu.in / 3.62 liters 12.03, 305.5mm 15.15, 384.8mm 10.95, 278.1mm 13.77, 349.6mm 11.59, 294.3mm 14.56, 369.9mm 4.9, 125mm 6.1, 155mm 7.8 lbs., 3.5 kg 12.1 lbs., 5.5 kg 9.9 lbs., 4.5 kg 14.1 lbs., 6.4 kg Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Solid composition felt dust cap 36 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

THE COPPERHEAD DELTA DEMON LIL BUDDY RAGIN CAJUN THE COPPERHEAD 10, 254mm DELTA DEMON 10, 254mm LIL BUDDY 10, 254mm RAGIN CAJUN 10, 254mm 75W 105Hz 70Hz-5kHz 99 20 oz. 1.5, 38.1mm 100W 76Hz 80Hz-3kHz 96.9 30 oz. 2, 50.8mm 50W 149Hz 80Hz-5kHz 99.1 30 oz. 1.75, 44.5mm 75W 84Hz 70Hz-5kHz 100 30 oz. 1.5, 38.1mm 105Hz 7.59 0.37mH 13.27 1.05 0.98 27.0 liters / 1.0 cu.ft. 0cc 0.14mm/N 8.8 T-M 16 grams 100 0.0mm 366.1 cm2 76Hz 6.9 0.66mH 15.06 0.53 0.51 41.1 liters / 1.5 cu.ft. 88cc 0.22mm/N 11.3 T-M 21 grams 143 2.4mm 366.1 cm2 149Hz 6.31 0.46mH 9.06 0.93 0.84 10 liters / 0.35 cu.ft. 29cc 0.05mm/N 11.7 T-M 22 grams 160 0.8mm 366.1 cm2 84Hz 7.3 0.39mH 10.8 0.68 0.64 34.1 liters / 1.2 cu.ft. 18cc 0.18mm/N 11.5 T-M 20 grams 156 0.5mm 366.1 cm2 58.1 cu.in / 0.95 liters 10.11, 256.8mm 9.13, 231.8mm 0.23, 5.7mm 9.6, 243.8mm 4.2, 107mm 4.5 lbs., 2 kg 6.4 lbs., 2.9 kg 66.9 cu.in / 1.1 liters 10.09, 256.2mm 9.05, 229.7mm 9.66, 245.4mm 3.8, 97mm 6.8 lbs., 3.1 kg 8.5 lbs., 3.9 kg 66.9 cu.in / 1.1 liters 10.11, 256.8mm 9.13, 231.8mm 0.23, 5.7mm 9.6, 243.8mm 4.3, 109mm 6.3 lbs., 2.9 kg 7.4 lbs., 3.4 kg 66.9 cu.in / 1.1 liters 10.11, 256.8mm 9.13, 231.8mm 0.23, 5.7mm 9.6, 243.8mm 4.3, 109mm 6.4 lbs., 2.9 kg 8.2 lbs., 3.7 kg Vented core Paper former Hemp Cone WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 37

BLACK MOUNTAIN BLACK POWDER CANIS MAJOR SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details BLACK MOUNTAIN BLACK POWDER CANIS MAJOR 30W 69Hz 70Hz-5.5kHz 101.3 35 oz. 0.312, 7.94mm 1.75, 44.45mm 68.58Hz 6.44.62 mh 8.13 0.53 0.50 69.64 liters / 2.46 cu.ft. 40cc 0.19 mm/n 12.07 T-M 27.8 grams 129.2 0.8mm 506.7 cm2 136.7 cu.in / 2.24 liters 12.26, 311.4mm 11.06, 280.9mm 11.71, 297.4mm 5.95, 151.1mm 8.9 lbs, 4.04 kg 11.1 lbs, 5 kg Copper Voice Coil Paper former Alnico magnet 75W 72Hz 70Hz-5kHz 100 30 oz. 1.5, 38.1mm 72Hz 7.1 0.37mH 14.98 0.75 0.72 82.4 liters / 2.9 cu.ft. 25cc 0.22mm/N 9.9 T-M 23 grams 96 0.5mm 519.5 cm2 117.7 cu.in / 1.93 liters 12.23, 310.5mm 11.02, 279.8mm 11.67, 296.4mm 4.6, 117mm 7 lbs., 3.2 kg 9 lbs., 4.1 kg 12, 305mm 50W 105Hz 70Hz-4kHz 102 35 oz. 1.75, 44.5mm 104.86Hz 6.45 0.61mH 10.16 0.71 0.66 34.08 liters / 1.2 cu.ft. 42cc 0.09mm/N 12.6 T-M 26.6 grams 147.6 0.8mm 532.4 cm2 136.7 cu.in / 2.24 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 6.2. 157.5mm 9.3 lbs., 4.2 kg 10.2 lbs., 4.63 kg Paper former Alnico magnet Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Seamed Treated paper dust cap Hemp Cone 38 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

CANNABIS REX COMMONWEALTH 12 LIL TEXAS CANNABIS REX 8 or 16 ohms COMMONWEALTH 12 LIL TEXAS 8 or 16 ohms 50W 96Hz 70Hz-5kHz 102 38 oz. 1.75, 44.5mm 225W 50Hz 50Hz-4kHz 100 109 oz. 0.29, 7.2mm 4, 101.6mm 125W 90Hz 70Hz-5.5kHz 101 4 oz. 0.28, 7.2mm 2, 50.8mm 96Hz 6.56 0.44mH 9.28 0.69 0.64 50 liters / 1.8 cu.ft. 45cc 0.11mm/N 11.8 T-M 24 grams 139 0.8mm 558.6 cm2 50Hz 6.34 0.46mH 6.61 0.35 0.33 90 liters / 3.2 cu.ft. 36cc 0.24mm/N 15.7 T-M 43 grams 143 0.7mm 519.5 cm2 90Hz 7.2 0.42mH 11.29 0.69 0.65 43 liters / 1.53 cu.ft. 66cc 0.11mm/N 12.8 T-M 28 grams 130 1.3mm 519.5 cm2 122 cu.in / 2 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.1, 130mm 8.2 lbs., 3.7 kg 9.8 lbs., 4.5 kg 179.3 cu.in / 2.94 liters 12.28, 312.0mm 11.08, 281.3mm 0.27, 6.8mm 11.69, 297.0mm 5, 127mm 21.5 lbs., 9.8 kg 23.2 lbs., 10.5 kg 102.2 cu.in / 1.67 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.3mm 5.07, 129mm 4.1 lbs., 1.9 kg 5.8 lbs., 2.6 kg Paper former Aluminum voice coil Vented core Neodymium magnet Hemp Cone Die-cast aluminum basket Aluminum dust cap WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 39

MAVERICK RED WHITE AND BLUES SCREAMIN EAGLE SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details MAVERICK 75W 82.45 Hz 75 Hz - 5.2 khz Max Attenuation: 91.5 db Full Output: 100 db 38 oz 7.92 mm 1.75, 44.5 mm MAX ATTENUATION FULL OUTPUT 82.6 Hz 82.45 Hz 5.96 5.99 0.38 mh 0.48 mh 16.26 16.77 6.16 1.17 4.47 1.09 48.71 liters 48.71 liters 24.42 cc 24.42 cc 0.13 mm/n 0.13 mm/n 3.76 T-M 8.71 T-M 28.2 grams 28.5 grams 13.4 70.73.047 mm 0.47 mm 519.5 cm2 519.5 cm2 134.25 cu.in., 2.2 liters 12.03, 305.5 mm 10.95, 278.1 mm YES YES 0.25, 6.4 mm 11.59, 294.3 mm 6.562, 166.6 mm 7.8 lbs., 3.54 kg 9.7 lbs., 4.39 kg FDM Technology RED WHITE AND BLUES 120W 110Hz 70Hz-4.5kHz 101 38 oz. 1.75, 44.5mm 110Hz 6.42 0.43mH 7.19 0.89 0.79 30.8 liters / 1.1 cu.ft. 45cc 0.07mm/N 12.3 T-M 30 grams 124 0.8mm 558.6 cm2 122 cu.in / 2 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.1, 130mm 8.2 lbs., 3.7 kg 10.1 lbs., 4.6 kg SCREAMIN EAGLE 8 or 16 ohms 50W 79Hz 65Hz-5.5kHz 101 38 oz. 1.75, 44.5mm 79Hz 6.84 0.48mH 15.95 0.60 0.58 51.5 liters / 1.8 cu.ft. 64cc 0.13mm/N 13.1 T-M 30 grams 132 1.2mm 519.5 cm2 122 cu.in / 2 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.1, 130mm 8.3 lbs., 3.8 kg 10 lbs., 4.5 kg Paper former Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Full molded paper cone Paper cone Paper cone 40 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

SWAMP THANG TEXAS HEAT COMMONWEALTH 15 SWAMP THANG 8 or 16 ohms TEXAS HEAT 8, 4 or 16 ohms COMMONWEALTH 15 15, 381mm 4 ohms 150W 97Hz 70Hz-5kHz 102 59 oz. 2, 50.8mm 150W 79Hz 70Hz-5kHz 99 38 oz. 2, 50.8mm 225W 52Hz 50Hz-4kHz 100.8 109 oz. 0.29, 7.2mm 4, 101.6mm 97Hz 6.92 0.42mH 14.43 0.55 0.53 41.3 liters / 1.5 cu.ft. 43cc 0.10mm/N 14.2 T-M 26 grams 177 0.8mm 532.4 cm2 79Hz 7.3 0.54mH 13.88 0.68 0.65 50.9 liters / 1.8 cu.ft. 42cc 0.13mm/N 12.8 T-M 31 grams 116 0.8mm 519.5 cm2 52Hz 3.72 0.22mH 6.75 0.57 0.53 163 liters / 5.8 cu.ft. 29cc 0.15mm/N 11.8 T-M 65 grams 91 0.3mm 889.6 cm2 137.3 cu.in / 2.25 liters 12.01, 305.1mm 10.95, 278.1mm 11.63, 295.4mm 5.2, 132mm 11.1 lbs., 5 kg 12.8 lbs., 5.8 kg 122 cu.in / 2 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.1, 130mm 8.3 lbs., 3.8 kg 10 lbs., 4.5 kg 262.8 cu.in / 4.31 liters 15.28, 388.0mm 14.06, 357.0mm 0.26, 6.5mm 14.57, 370.0mm 6, 152mm 22.6 lbs., 10.3 kg 24.8 lbs., 11.3 kg Aluminum voice coil Vented core Die-cast aluminum basket Aluminum dust cap WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 41

RAMROD RED FANG 10 THE GOVERNOR SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details RAMROD RED FANG 10 THE GOVERNOR 10, 254mm 75W 101Hz 80Hz-5kHz 100 30 oz. 1.5, 38.1mm 101Hz 7.3 0.39mH 10.80 0.68 0.64 24.6 liters / 0.9 cu.ft. 18cc 0.13mm/N 11.5 T-M 19 grams 149 0.5mm 366.1 cm2 66.9 cu.in / 1.1 liters 10.11, 256.8mm 9.13, 231.8mm 0.23, 5.7mm 9.6, 243.8mm 4.3, 109mm 5.4 lbs., 2.5 kg 8.3 lbs., 3.8 kg 10, 254mm 50W 111Hz 70Hz-4.5kHz 102 35 oz. 0.312, 7.92mm 1.75, 44.5mm 111Hz 5.8 0.55mH 12.64 0.50 0.48 21.3 liters/.75 cu.ft. 17cc 0.11mm/N 12.1 T-M 18 grams 223 0.47mm 366.1 cm2 86 cu.in / 1.41 liters 10.11, 256.8mm 9.13, 231.9mm 0.23, 5.8mm 9.6, 243.8mm 5.2, 132mm 7.7 lbs., 3.5 kg 8.5 lbs., 3.9 kg Nomex former Alnico magnet 8 or 16 ohms 75W 101Hz 70Hz-5kHz 102 56 oz. 1.75, 44.5mm 101Hz 6.81 0.41mH 11.41 0.59 0.56 30.1 liters / 1.1 cu.ft. 64cc 0.08mm/N 15.3 T-M 32 grams 171 1.2mm 519.5 cm2 137.3 cu.in / 2.25 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.2, 132mm 10.8 lbs., 4.9 kg 12.6 lbs., 5.7 kg Nomex former Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Paper cone 42 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

MAN O WAR PRIVATE JACK REIGNMAKER MAN O WAR PRIVATE JACK REIGNMAKER 8 or 16 ohms 8 or 16 ohms 120W 91Hz 70Hz-5.5kHz 102 38 oz. 1.75, 44.5mm 91Hz 6.2 0.43mH 11.66 0.72 0.68 38.0 liters / 1.3 cu.ft. 42cc 0.10mm/N 12.3 T-M 31 grams 127 0.8mm 519.5 cm2 50W 96Hz 70Hz-5kHz 101 38 oz. 1.75, 44.5mm 96Hz 7.01 0.49mH 18.19 0.72 0.69 33.7 liters / 1.2 cu.ft. 64cc 0.09mm/N 13.5 T-M 31 grams 134 1.2mm 519.5 cm2 75W 91.0 Hz 80 Hz - 6.2 khz Max Attenuation: 91.5 db 38 oz 7.92 mm 1.75, 44.5 mm MAX ATTENUATION 91.25 Hz 5.94 0.44 mh 16.82 7.84 5.35 37.47 liters 24.42 cc 0.10 mm/n 3.62 T-M 30.15 grams 11.65 0.47 mm 519.5 cm2 Full Output: 100 db FULL OUTPUT 91.00 Hz 5.98 0.50 mh 20.19 1.37 1.29 37.47 liters 24.42 cc 0.10 mm/n 8.74 T-M 30.65 grams 66.31 0.47 mm 519.5 cm2 122 cu.in / 2 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.2, 132mm 8.1 lbs., 3.7 kg 9.9 lbs., 4.5 kg 122 cu.in / 2 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.1, 130mm 8 lbs., 3.6 kg 9.8 lbs., 4.5 kg 134.25 cu.in., 2.2 liters 12.03, 305.5 mm 10.95, 278.1 mm YES YES 0.25, 6.4 mm 11.59, 294.3 mm 6.562, 166.6 mm 7.8 lbs., 3.54 kg 9.7 lbs., 4.39 kg Paper former FDM Technology Full molded paper cone WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 43

RED FANG THE TONESPOTTER THE TONKER SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details RED FANG THE TONESPOTTER THE TONKER 8 or 16 ohms 50W 97Hz 70Hz-5.5kHz 103 35 oz. 1.75, 44.5mm 97Hz 5.72 0.39mH 13.39 0.74 0.70 39.4 liters / 1.4 cu.ft. 25cc 0.10mm/N 11.1 T-M 26 grams 131 0.5mm 519.5 cm2 136.7 cu.in / 2.24 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 6.2, 158mm 9.3 lbs., 4.2 kg 11.1 lbs., 5 kg Nomex former Alnico magnet 75W 88Hz 70Hz-5.5kHz 100.7 38 oz. 1.75, 44.5mm 88Hz 6.76 0.47mH 10.04 0.73 0.68 39.7 liters / 1.4 cu.ft. 64cc 0.10mm/N 12.7 T-M 32 grams 120 1.2mm 519.5 cm2 122 cu.in / 2 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.1, 130mm 8 lbs., 3.6 kg 9.8 lbs., 4.5 kg Paper former 8 or 16 ohms 150W 89Hz 70Hz-5.5kHz 102 59 oz. 2, 50.8mm 89Hz 7.36 0.47mH 10.02 0.49 0.47 34.1 liters / 1.2 cu.ft. 42cc 0.09mm/N 17.4 T-M 36 grams 181 0.8mm 519.5 cm2 137.3 cu.in / 2.25 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.2, 132mm 11.1 lbs., 5 kg 13.2 lbs., 6 kg Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition 44 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

THE WIZARD TONKERLITE BIG BEN THE WIZARD 8 or 16 ohms TONKERLITE 8 or 16 ohms BIG BEN 15, 381mm 75W 89Hz 70Hz-5.5kHz 103 56 oz. 1.75, 44.5mm 125W 109Hz 70Hz-5.5kHz 101 4 oz. 0.28, 7.2mm 2, 50.8mm 225W 85Hz 70Hz-3.5kHz 101.5 56 oz. 0.375, 9.53mm 2.5, 63.5mm 89Hz 6.13 0.38mH 11.48 0.49 0.47 41.5 liters / 1.5 cu.ft. 42cc 0.11mm/N 14.4 T-M 30 grams 181 0.8mm 519.5 cm2 109Hz 7.2 0.42mH 12.58 0.85 0.8 27.4 liters / 1.0 cu.ft. 61cc 0.07mm/N 13.1 T-M 30 grams 129 1.2mm 519.5 cm2 85Hz 6.06 0.51mH 10.63 1.04 0.94 77.7 liters / 2.74 cu.ft. 0cc 0.08mm/N 12.1 T-M 47 grams 82 0.0mm 856.3 cm2 137.3 cu.in / 2.25 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.2, 132mm 10.8 lbs., 4.9 kg 12.5 lbs., 5.7 kg 102.2 cu.in / 1.67 liters 12.02, 305.3mm 10.97, 278.6mm 11.63, 295.4mm 5.1, 129mm 4.1 lbs., 1.9 kg 5.8 lbs., 2.6 kg 220.8 cu.in / 3.62 liters 15.13, 384.2mm 13.8, 350.5mm 14.56, 369.9mm 6.1, 155mm 12.6 lbs., 5.7 kg 14.9 lbs., 6.8 kg Nomex former Neodymium magnet WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 45

bass guitar Look inside most any professional or name brand bass amplifier or enclosure and you re going to find custom designed, Eminence bass guitar speakers. No other speaker manufacturer has a better understanding of bass guitar enclosures and the physics of the woofers required to hold your back line together. Whether you re packing a 20lb. practice amp or a 150lb. 8X10 seismic generator, you ve chosen your rig to cut through the mix with your signature sound. Maybe you want fast, tight, and articulate, or perhaps you need a fat, round, and warm tone. Maybe you need a speaker that gives you the best of both worlds. You might be playing the CMA awards, have 4 roadies and care less how much your gear weighs, or perhaps your humping yourself to a club in Manhattan via public transportation and can t carry another pound. No matter your circumstances, there s no reason to compromise on your tone! The world s best bass gear manufacturers can t be wrong, and neither should you. Whether you need to replace a single speaker or want to completely re-vamp your entire rig, let the bass experts at Eminence give you a hand. We re here to help! 502.845.5622 or info@eminence.com. With a seven-year warranty inside the continental United States, Made in the USA, and offered at prices for the working musician, it s never been easier to put your rig on the Richter scale. PA & Musician Speaker Components A Premier Eminence Stocking Distributor Tel: 1-877-732-5374 www.usspeaker.com

BASSLITE CA2010 BASSLITE CH2010 BASSLITE S2010 SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details BASSLITE CA2010 BASSLITE CH2010 BASSLITE S2010 10, 254mm 150W 300W 51Hz 48Hz-7kHz 93.5 4 oz. 0.28, 7.2mm 2, 50.8mm 51Hz 5.46 0.55mH 17.5 0.52 0.51 49 liters / 1.7 cu.ft. 126cc 0.27mm/N 11.2 T-M 37 grams 98 3.5mm 360.7 cm2 7.0mm 17-23 liters/ 0.6-0.8 cu.ft. 23-54 liters/ 0.8-1.9 cu.ft. 48.5 cu.in / 0.79 liters 10.25, 260.4mm 9.13, 231.9mm 0.28, 7.0mm 9.73, 247.1mm 4.75, 121mm 3.6 lbs.,1.6 kg 4.7 lbs., 2.1 kg Neodymium magnet 10, 254mm 150W 300W 58Hz 54Hz-3kHz 96.7 4 oz. 0.28, 7.2mm 2, 50.8mm 58Hz 5.37 0.52mH 6.5 0.47 0.44 43 liters / 1.5 cu.ft. 120cc 0.26mm/N 11.1 T-M 30 grams 123 3.5mm 344.9 cm2 7.5mm 17-51 liters/ 0.6-1.8 cu.ft. 48.5 cu.in / 0.79 liters 10.25, 260.4mm 9.13, 231.9mm 0.28, 7.0mm 9.73, 247.1mm 4.75, 121mm 3.6 lbs.,1.6 kg 4.7 lbs., 2.1 kg Neodymium magnet 10, 254mm 150W 300W 46Hz 54Hz-4kHz 96.2 4 oz. 0.28, 7.2mm 2, 50.8mm 46Hz 5.02 0.47mH 4.16 0.34 0.31 63.4 liters / 2.2 cu.ft. 140cc 0.36mm/N 11.9 T-M 33 grams 135 4.0mm 350.1 cm2 8.0mm 20-51 liters/ 0.7-1.8 cu.ft. 51.4 cu.in / 0.84 liters 10.08, 256mm 9.05, 229.9mm 9.66, 245.4mm 4.25, 108mm 3.5 lbs., 1.6 kg 4.6 lbs., 2.1 kg Neodymium magnet Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Die-cast aluminum basket Aluminum Alloy Cone Solid composition felt dust cap Die-cast aluminum basket Hemp Cone ô Solid composition felt dust cap WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 47

bass guitar LEGEND B102 LEGEND BP102 LEGEND B810 SPECIFICATION Nominal Basket Diameter Nominal Impedance* Power Rating** Watts Music Program Resonance Usable Frequency Range Sensitivity*** Magnet Weight Gap Height Voice Coil Diameter THIELE & SMALL PARAMETERS Resonant Frequency (fs) DC Resistance (Re) Coil Inductance (Le) Mechanical Q (Qms) Electromagnetic Q (Qes) Total Q (Qts) Compliance Equivalent Volume (Vas) Peak Diaphragm Displacement Volume (Vd) Mechanical Compliance of Suspension (Cms) BL Product (BL) Diaphragm Mass Inc. Airload (Mms) Efficiency Bandwidth Product (EBP) Maximum Linear Excursion (Xmax) Surface Area of Cone (Sd) Maximum Mechanical Limit (Xlim) MOUNTING INFORMATION Recommended Enclosure Volume Sealed Vented Driver Volume Displaced Overall Diameter Baffle Hole Diameter Front Sealing Gasket Rear Sealing Gasket Mounting Holes Diameter Mounting Holes B.C.D. Depth Net Weight Shipping Weight MATERIALS OF CONSTRUCTION Coil Construction Coil Former Magnet Composition Core Details LEGEND B102 10, 254mm 200W 400W 48Hz 44Hz-4kHz 93 45 oz. 2, 50.8mm 48Hz 6.89 0.67mH 5.31 0.42 0.39 65 liters / 2.3 cu.ft. 104cc 0.40mm/N 11.8 T-M 28 grams 113 3.0mm 344.9 cm2 8.0mm 18-85 liters/0.63-3 cu.ft. 81.1 cu.in / 1.33 liters 10.25, 260.4mm 9.13, 231.8mm 0.28, 7.1mm 9.63, 244.5mm 4.33, 110mm 9.7 lbs., 4.4 kg 10.9 lbs., 4.9 kg Vented and extended core LEGEND BP102 10, 254mm 8 or 4 ohms 200W 400W 35Hz 40Hz-2kHz 92 38 oz. 2, 50.8mm 35Hz 5.59 0.83mH 5.36 0.47 0.43 91.2 liters / 3.2 cu.ft. 207cc 0.54mm/N 10.0 T-M 38 grams 75 6.2mm 334.5 cm2 10.0mm 14-28 liters/ 0.5-1 cu.ft. 25.5-62 liters/ 0.9-2.2 cu.ft. 71.3 cu.in / 1.17 liters 10.08, 256.1mm 9.05, 229.7mm 9.66, 245.4mm 4.25, 108mm 8.9 lbs., 4 kg 9.1 lbs., 4.1 kg LEGEND B810 10, 254mm 32 ohms 150W 300W 52Hz 49Hz-5.1kHz 92.7 30 oz. 0.312, 7.94mm 2, 50.8mm 52.07Hz 27.5 2.72mH 13.91 0.68 0.65 66.4 liters / 2.34 cu.ft. 165.2cc 0.39mm/N 17.7 T-M 23.8 grams 76.8 4.7mm 350.1 cm2 9.5mm 14-35 liters/0.5-1.3 cu.ft. 45-76 liters/1.6-2.7 cu.ft. 66.9 cu.in / 1.1 liters 10.11, 256.8mm 9.13, 231.9mm 0.23, 5.7mm 9.60, 243.8mm 4.08, 103.6mm 6.7 lbs, 3.04 kg 7.9 lbs, 3.6 kg Kapton Basket Materials Cone Composition Cone Edge Composition Dust Cap Composition Die-cast aluminum basket 48 * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity.

BASSLITE S2012 BASSLITE C2515 LEGEND CA154 LEGEND CB158 BASSLITE S2012 BASSLITE C2515 15, 381mm 4 ohms LEGEND CA154 15, 381mm 4 ohms LEGEND CB158 15, 381mm 150W 300W 48Hz 49Hz-4.5kHz 97 4 oz. 0.28, 7.2mm 2, 50.8mm 300W 600W 38Hz 52Hz-2.5kHz 98 7 oz. 0.28, 7mm 2.5, 63.5mm 300W 600W 51.Hz 45Hz-3.0kHz 96.9 56 oz..38, 9.53mm 2.5, 63.5mm 300W 600W 34Hz 47Hz-3kHz 98 80 oz. 0.375, 9.53mm 2.5, 63.5mm 48Hz 5.1 0.43mH 5.5 0.53 0.48 91 liters / 3.2 cu.ft. 270cc 0.24mm/N 11.7 T-M 46 grams 91 5.2mm 519.5 cm2 9.8mm 38Hz 3.72 0.39mH 4.7 0.50 0.45 260 liters / 9.2 cu.ft. 381cc 0.26mm/N 11.1 T-M 70 grams 76 4.5mm 856 cm2 8.5mm 51Hz 2.9 0.80mH 4.94 0.54 0.49 108.2 liters / 3.82 cu.ft. 412cc 0.11mm/N 12.2 T-M 87 grams 94 5.0mm 823.7 cm2 8.0mm 34Hz 6.15 0.33mH 5.9 0.36 0.34 336 liters / 11.9 cu.ft. 411cc 0.31mm/N 16.0 T-M 70 grams 95 4.8mm 856.3 cm2 9.5mm 31-35 liters/ 1.1-1.3 cu.ft. 42.5-85 liters/ 1.5-3 cu.ft. 102.2 cu.in / 1.67 liters 12.03, 305.5mm 10.95, 278.1mm 11.59, 294.3mm 5.1, 130mm 4.1 lbs., 1.9 kg 5.8 lbs., 2.6 kg 45-82 liters/ 1.6-2.9 cu.ft. 85-119 liters/ 3-4.2 cu.ft. 145.1 cu.in / 2.38 liters 15.32, 389.1mm 14.0, 355.6mm 0.28, 7.0mm 14.56, 369.9mm 6.9, 175mm 5.7 lbs., 2.6 kg 7.9 lbs., 3.6 kg 40-71 liters/1.4-2.5 cu.ft. 45-170 liters/1.6-6.0 cu.ft. 220.8 cu.in / 3.62 liters 15.15, 384.81mm 13.87,352.3mm 14.56, 369.8mm 6.25, 159mm 11.9 lbs., 5.4 kg 14.1 lbs., 6.4 kg 54-65 liters/ 1.9-2.3 cu.ft. 54-159 liters/ 1.9-5.6 cu.ft. 239 cu.in / 3.92 liters 15.21, 386.4mm 14.0, 355.3mm 0.28, 7.1mm 14.56, 369.9mm 6.5, 165mm 17.3 lbs., 7.9 kg 19.4 lbs., 8.8 kg Neodymium magnet Neodymium magnet Vented core Vented core Vented and extended core Solid composition felt dust cap Die-cast aluminum basket Pressed Steel basket Treated Sealed Cloth Surround Treated paper dust cap Die-cast aluminum basket WWW.EMINENCE.COM * Please see footnotes on page 3 for information regarding Nominal Impedance, Power Rating and Sensitivity. 49

Guitar Speaker Tonal Characteristics and Application Guide *Coloration, Tone, and the appropriateness of a speaker for a specific genre of music are very subjective subjects. Eminence has dedicated countless hours to the tonal evaluation of each speaker in these two series. Additional listening tests were also conducted by Greg Martin, lead guitarist for the Kentucky Headhunters and Steve Wilson of Ambient Sound, both recognized in the music industry as experts on the subject of guitar tone. This data is provided to be used as a general guideline to aid in guitar speaker selection, however the suitability of a specific speaker for a specific purpose is a matter of personal taste and can only be determined by you the user. Eminence makes no guarantees regarding the suitability of any speaker in these series for any specific application. Name Application Configuration Low End Response Low End Shape Mid-Range Response Mid-Range Shape High-End Response Volume/ Power Overall Coloration* Break-up Modes Power Range Instrument* Genre of Music* maverick 12" Open Back 1 X 12" Aggressive Fat/Round Moderate Warm Moderate Louder Very balanced, warm, fat, clean American tone with fat lows, warm mids, and Medium Up to 75 watts Lead/Rhythm Guitar All genres articulate highs. More attenuation provides more warmth and fatter lows The Copperhead 10" Open or Closed Back 1, 2, or 4 X 10" Moderate Tight Aggressive Warm Moderate Louder Extremely balanced vintage tone with a little country honk and a touch of Medium Up to 75 watts classic blues tone. Lead/Rhythm Guitar, Harmonica Country, Blues, Bluegrass, and Funk Delta Demon 10" Closed Back 1, 2, or 4 X 10" Moderate Fat/Round Subdued Dark Subdued Loud Extremely balanced, dark, creamy smooth tone Slow Up to 100 watts Lead/Rhythm Guitar Jazz, Delta Blues, and Classical Lil' Buddy 10" Open or Closed Back 1, 2, or 4 X 10" Aggressive Fat/Round Moderate Warm Subdued Louder A clean and full tone, slow to break-up, but crunchy when driven. Smoother Slow Up to 50 watts and less defined than many 10 guitar speakers. Lead/Rhythm Guitar, Jazz, Rock, and Blues Harmonica Ragin Cajun 10" Open or Closed Back 1, 2, or 4 X 10" Aggressive Chunky Moderate Crisp Aggressive Loudest Very loud, touch sensitive and responsive with nice bell sounding top end and Medium Up to 75 watts Lead/Rhythm Guitar a little bite. American Rock, Blues, and Country Black Mountain 12" Open or Closed Back 1 or 2 X 12" Subdued Tight Moderate Warm Aggressive Louder Vintage American voiced tone with tight lows and warm, smooth upper mid Fast Up to 30 watts Lead/Rhythm Guitar Blues, Classic Rock, Country emphasis and highs. Great single note lead tone Black Powder 12" Open Back 1, or 2 X 12" Subdued Tight Moderate Crisp Aggressive Louder Raw and bright with tight bass and explosive mids and highs Medium Up to 75 watts Lead/Rhythm Guitar Southern Rock, College Rock, Heavy Metal, and Grunge Canis Major 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Fat/Round Moderate Warm Moderate Loudest Clean, full vintage tone with fat, warm lows, woody mids and tame, smooth Slow Up to 50 watts Lead/Rhythm Guitar highs Country, Blues, Jazz, Classical, Rock Cannabis Rex 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Fat/Round Moderate Warm Moderate Loudest Clean and full, with lots of body and sparkle. Smokey smooth with high-end Slow Up to 50 watts definition. Lead/Rhythm Guitar, Country, Jazz, Classical Acoustic Guitar, Keyboard Commonwealth 12" 12" Open or Closed Back 1, or 2 X 12" Aggressive Fat/Round Moderate Warm Moderate Louder Warm and rich, but also very clean and well defined. Great presence! Very Slow Up to 125 watts full and smooth. Very little cone break-up, but likes Overdrive. Lead/Rhythm/Steel All genres Guitar Lil' Texas 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Tight Aggressive Crisp Aggressive Louder Very balanced with crisp mids and top end bite. Tight bottom end, very Medium Up to 125 watts Lead/Rhythm Guitar Classic Rock, Blues, Country American tonality. Red White and Blues 12" Open or Closed Back 1, 2, or 4 X 12" Moderate Tight Moderate Warm Aggressive Louder Nice tight low-end, smooth midrange and top end sparkle. American cousin to Medium Up to 120 watts Lead/Rhythm Guitar The Governor. Classic American Rock tone of the 60's and 70's Screamin Eagle 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Tight Moderate Crisp Aggressive Louder Bright and articulate tone with screamin top end and tight bass Medium Up to 50 watts Lead/Rhythm Guitar Good club speaker for American Blues and Rock Swamp Thang 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Fat/Round Aggressive Dark Moderate Loudest Very powerful, thick and chunky tone. Very touch sensitive with good sustain. Slow Up to 150 watts Lead/Rhythm Guitar Awesome bottom end. Very American tone suitable for Blues, Rock, and Jazz Texas Heat 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Fat/Chunky Aggressive Crisp Moderate Louder Nice warm, fat tone with a little top end bite and clarity. Very touch sensitive Medium Up to 150 watts Lead/Rhythm Guitar with a hint of British flavor. American Rock, Blues, and Southern Rock Commonwealth 15" 15" Open Back 1, or 2 X 15" Aggressive Fat/Round Moderate Warm Moderate Louder Warm and rich, but also very clean and well defined. Great presence! Very Slow Up to 150 watts full and smooth. Very little cone break-up, but likes Overdrive. Lead/Rhythm/Steel All genres Guitar

reignmaker Very balanced British tone with tight/punchy lows, warm/detailed mids, 12" Open Back 1 X 12" Moderate Tight Aggressive Warm Aggressive Louder abundant in harmonic detail, and articulate highs. More attenuation provides Medium Up to 75 watts Lead/Rhythm Guitar All genres more warmth and fatter lows. Ramrod 10" Open or Closed Back 1, 2, or 4 X 10" Aggressive Chunky Moderate Warm Aggressive Louder Very loud, gutsy, and meaty tone with singing highs and nice, clear Medium Up to 75 watts Lead/Rhythm Guitar overtones British Rock and Blues, Country and Jazz Red Fang 10 10" Open or Closed Back 1, 2, or 4 X 10" Aggressive Chunky Moderate Warm Aggressive Loudest Vintage British tone with loads of detail, chime and grit and a nicely defined Medium Up to 50 watts Lead/Rhythm Guitar low end Vintage classic British tone for blues, country, rock, indie and jazz The Governor 12" Open or Closed Back 1, 2, or 4 X 12" Moderate Tight Aggressive Warm Moderate Loudest Classic British tone. Thick and raunchy with lots of mids Fast Up to 75 watts Lead/Rhythm Guitar Classic British Rock tone of the 60's and 70's Man O War 12" Open or Closed Back 1, 2, or 4 X 12" Moderate Chunky Aggressive Crisp Aggressive Loudest A proven and revered sound, very loud and responsive/articulate in every Slow Up to 120 watts register. Chunky and solid sound with a little top end sparkle Lead/Rhythm Guitar, Harmonica Great for College Rock, Classic Rock, Grunge, and Heavy Metal Private Jack 12" Open or Closed Back 1, 2, or 4 X 12" Moderate Tight Moderate Warm Aggressive Louder Thick and smooth, with lots of mids and extended highs. Very well balanced Medium Up to 50 watts Lead/Rhythm Guitar speaker. Classic British flavor Classic British tone for Blues, Indie, Jazz Red Fang 12" Open or Closed Back 1, 2, or 4 X 12" Moderate Chunky Moderate Warm Aggressive Loudest Vintage British sound with warm undertones and high-end sparkle Fast Up to 50 watts Lead/Rhythm Guitar Vintage classic British tone for Blues, Country, Indie and Jazz The Tonespotter 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Fat/Round Aggressive Warm Moderate Louder Very smooth and warm with a fat bottom end and highs that cut through the Medium Up to 75 watts Lead/Rhythm Guitar mix. Warm and thick overtones Authentic British flavor well suited for Blues and Classic Rock The Tonker 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Fat/Round Moderate Warm Moderate Loudest A very fat, clean and warm tone through the mid-range, smooth top end Medium Up to 150 watts Lead/Rhythm Guitar English Rock, Southern Rock, Country (Great with a Telecaster) Tonkerlite 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Fat/Round Moderate Warm Aggressive Loudest A nice round, balanced tone like the Tonker, but with extended top end and Medium Up to 125 watts Lead/Rhythm Guitar Blues, Southern Rock, Country less lower-mid meat. The Wizard 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Fat/Chunky Aggressive Warm Aggressive Loudest Very articulate, but with a hint of grit. Nice sustain and exceptionally good Medium Up to 75 watts Lead/Rhythm Guitar tight bottom. Cross between Private Jack and The Governor Classic Rock tones of the 60's and 70's Big Ben 15" Open Back 1, or 2 X 15" Aggressive Fat/Round Subdued Dark Moderate Louder A very big, clean and warm British sound. A somewhat throaty tone with fat Medium Up to 225 watts Lead/Rhythm Guitar bass and smooth highs. Delta Blues, Texas Blues, Jazz, and Country Vintage American tone with moderate, but tight, percussive lows and extended Legend 1028K 10" Open or Closed Back 1, 2, or 4 X 10" Subdued Tight Moderate Warm Aggressive Loud Fast Up to 35 watts highs. Lead/Rhythm Guitar, Country, Blues, Rock Harmonica Vintage American tone with punchy lows and warm, smooth, bluesy mids and Legend 1058 10" Open or Closed Back 1, 2, or 4 X 10" Moderate Chunky Moderate Warm Moderate Louder Medium Up to 75 watts Lead/Rhythm Guitar Country, Blues, Rock, Jazz highs. Fatter Legend 1028K tone with more depth. Vintage American tone with tight lows and warm, smooth mids and highs. Legend 1258 12" Open or Closed Back 1, 2, or 4 X 12" Subdued Tight Moderate Warm Aggressive Louder Medium Up to 75 watts Lead/Rhythm Guitar Blues, Rock Strong upper mid emphasis and extended highs. Balanced, more mellow British sound with warm, smooth mids and highs and Legend V128 12" Open or Closed Back 1, 2, or 4 X 12" Moderate Tight Moderate Warm Moderate Louder Medium Up to 120 watts Lead/Rhythm Guitar Blues, Rock, Heavy Metal tight lows. Cleaner British voiced tone with a full low end, warm, throaty mids and a very Legend GB128 12" Open or Closed Back 1, 2, or 4 X 12" Moderate Fat/Round Moderate Warm Moderate Louder Medium Up to 50 watts Lead/Rhythm Guitar Country, Blues, Rock open top end. A cleaner Private Jack tone with a fatter low end. Very balanced, fat, round, punchy lows and warm, smooth mids and lows, very Legend 1218 12" Open or Closed Back 1, 2, or 4 X 12" Aggressive Fat/Round Moderate Warm Moderate Louder Medium Up to 150 watts Lead/Rhythm Guitar Country, Blues, Rock, Jazz clean and articulate. Legend 1518 15" Open Back 1, or 2 X 15" Aggressive Tight Moderate Warm Moderate Louder Well balanced 15" with tight/punchy lows and warm, smooth mids and highs. Medium Up to 150 watts Lead/Rhythm Guitar Country, Blues, Rock, Jazz

UNDERSTANDING LOUDSPEAKER DATA The ability to choose the most appropriate loudspeaker for a particular enclosure is directly related to your understanding of the performance data that manufacturers provide with their products. Prior to 1970, there were no easy or affordable methods accepted as standard in the industry for obtaining this data. The recognized methods were expensive and often unrealistic for the thousands of individuals needing loudspeaker performance information. Thiele-Small parameters In the early seventies, several technical papers were presented to the AES (Audio Engineering Society) that resulted in the development of what we know today as Thiele-Small Parameters. These papers were authored by A.N. Thiele, and Richard H. Small. The Thiele and Small papers concentrated on showing how the following parameters define the relationship between a speaker and a particular enclosure. Eminence recommends that you develop a basic understanding for the meaning of each parameter so that you can make informed decisions when choosing your loudspeakers. Fs This parameter is the free-air resonant frequency of a speaker. Simply stated, it is the point at which the weight of the moving parts of the speaker becomes balanced with the force of the speaker suspension when in motion. It is important to know this information so that you can prevent your enclosure from ringing like a bell when it reaches its resonant frequency. As a general rule of thumb, a lower Fs indicates a woofer that would be better for low-frequency reproduction than a woofer with a higher Fs. However, other parameters affect the ultimate performance of a woofer as well and may make a speaker with a higher Fs a better candidate for your application. Re This parameter is very simply the DC resistance of the driver in question. In other words, this measurement is made with an ohm meter and is often referred to as the DCR. This measurement will almost always be less than the impedance listed by the manufacturer. Many consumers get concerned when they see that the Re is less than the published impedance and fear that their amplifier is getting a load that is too heavy. Due to the fact that the inductance of a speaker rises with a rise in frequency, it is not likely that the amplifier will often see the DC resistance as its load. Le This parameter is the voice coil inductance of the speaker measured in millihenries (mh). The industry standard is to measure inductance at 1,000 Hz. This is a difficult parameter to explain, but basically as frequencies get higher there will be a rise in impedance above the DC resistance rating. This can be attributed to the fact that the voice coil is acting as an inductor. Consequently, the impedance of a speaker is not a fixed resistance, but can be represented as a curve that changes as the input frequency changes. Maximum impedance or Zmax occurs at Fs. Q Parameters Qts, Qes, and Qtc are all measurements related to the control of a speaker s suspension when it reaches the resonant frequency. Qms is a measurement of the control coming from the speaker s mechanical suspension system; the surround and spider. Qes is a measurement of the control coming from the speaker s electrical suspension system; the voice coil and magnet. Qts is called the Total Q of the driver and is derived from an equation where Qes is multiplied by Qms and the result is divided by the sum of the same. The result is Qts. As a general guideline, woofers fall into three categories relative to their Qts: 1. Qts of.4 or below indicates a woofer well suited for a vented enclosure. 2. Qts between.4 and.7 indicates a woofer well suited for a sealed enclosure. 3. Qts of.7 or above indicates a woofer well suited for free-air or infinite baffle applications. These suggestions are simply rules of thumb and do not always apply. For instance, the Eminence Kilomax 18 has a Qts of.56 that would indicate a sealed enclosure, but we know that the Kilomax is one of the most highly regarded woofers in the Professional Audio industry for a ported enclosure. Vas/Cms Vas (Not to be confused with the recommended enclosure size.) represents the equivalent stiffness in an air volume to the force of the compliance (Cms) of the suspension in a particular speaker. It is one of the trickiest parameters to measure. Air changes relative to humidity and temperature. Cms is measured in meters per Newton. It is the force exerted by the mechanical suspension of the speaker. It is simply a measurement of its stiffness. Vd This parameter is the Peak Diaphragm Displacement Volume. It is the Xmax (Voice Coil Overhang) of the driver multiplied by the Sd (Surface area of the cone). Simply stated it is a measurement of how much air the cone will move at full excursion and is usually noted in cc. Bl Expressed in Tesla meters is a measurement of the motor strength of a speaker. This is created by the product of the magnetic field strength times the length of wire in the field. If you were to take a given mass, that when placed on the cone of a speaker would move the cone downward from its home position, then measure the current in amperes required to move the cone back to home position, you can calculate Bl. The formula is Ma in grams divided the current in amperes. Mms This parameter is the combination of the weight of the cone assembly plus the driver radiation mass load. Confusing but the weight of the cone assembly is easy. Most manufacturers know that weight when the speaker is designed. It is the sum of the weight of the cone assembly components. The driver radiation mass load is the confusing part. In simple terminology, it is the weight of the air that the cone will have to push. Air certainly has mass and needs to be recognized in these calculations. Rms This parameter represents the mechanical resistance of a driver s suspension losses. It is a measurement of the absorption qualities of the speaker suspension and is stated in N*sec/m. EBP This measurement represents Fs / Qe. It is used in many enclosure design formulas to determine if a speaker is more suitable for a closed or vented design. An EBP close to 100 usually indicates a speaker that is best suited for a vented enclosure. On the contrary, an EBP closer to 50 usually indicates a speaker best suited for a closed box design. Xmax Short for Maximum Linear Excursion. Speaker output becomes non-linear when the voice coil begins to leave the magnetic gap. Although suspensions can create non-linearity in output, the point at which the number of turns in the gap (see Bl) begins to decrease is when distortion starts to increase. Some manufacturers have often used the maximum excursion of the speaker which when exceeded would result in mechanical damage. This parameter is recognized as Xlim. The bottom line is; be sure you are comparing apples to apples. Most manufacturers will specify the way this measurement is obtained. Distortion is typically very audible before Xlim is reached due to the increase in non-linearity in the motor and suspensions. Continued on page 54. 52

Parts Express stocks more Eminence drivers than anyone along with more than 15,000 audio, video and speaker building components! Visit parts-express.com or call 1-800-338-0531 to order your FREE 2011 catalog! 725 Pleasant Valley Dr. Springboro, OH 45066

UNDERSTANDING LOUDSPEAKER DATA, continued from page 52. Sd This parameter is the actual surface area of the cone, normally given in square cm. Zmax This parameter represents the speaker s impedance at resonance and it is usually many times the DCR of the driver. Additional Performance Data In addition to Thiele-Small Parameters, loudspeaker manufacturers typically publish additional measurements and performance information. Again, it is wise to become familiar with this data and what it actually means to you. Usable Frequency Range This data is relatively self-explanatory. It is the frequency range for which Eminence feels the device will prove useful. Each manufacturer uses different techniques for determining Usable Frequency Range. Most methods are recognized as acceptable in the industry, but can lend different results. Eminence response curves are measured as follows: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance. [LMS using 0.25 supplied microphone (software calibrated) mounted 1m from wall/baffle.] [2 ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction.] [Hafler P1500 Trans-Nova amplifier] [2,700 cu. ft. anechoic chamber with fiberglass on all six surfaces (three with custom-made wedges).] Spl (Average Sensitivity) This data represents one of the most useful specifications published for any transducer. It is a representation of the output you can expect from a device relative to the input power. This is important because it requires 2 times the power to increase the volume of a speaker 3 db. To increase the volume of a 50-watt guitar amplifier 3 db (an audible, but relatively small amount), it would require a total of 100 watts of power. The same thing could be achieved by replacing the speaker with one that is 3 db more sensitive (usually a more economical alternative). Most manufacturers determine sensitivity by putting the speaker in a baffle and measuring the sound pressure level inside an anechoic chamber at a distance of one meter, with 1 watt of input power across the frequency response curve. A loudspeaker measurement software program then would generally calculate the average sound pressure level over the response curve. This is a good method and usually very accurate. The problem is that one manufacturer may place the microphone one meter from the dust cap of the speaker and gain a distinct advantage over the manufacturer who placed the microphone one meter from the baffle board. Again, be sure you understand how this specification was derived. The Eminence method represents the average output across the usable frequency range when applying 1W/1m into the nominal impedance. Ie 2.83V/8ohms, 4V/16ohms. Power Rating This specification is very important to transducer selection. Obviously, you need to choose a loudspeaker that is capable of handling the input power you are going to provide. By the same token, you can destroy a loudspeaker by using too little power. Generally speaking, the number one contributor to a transducer s ability to handle power is its ability to release thermal energy. Those loudspeaker characteristics are affected by several design choices, but most notably voice coil size, magnet size, venting, and the adhesives used in voice coil construction. Larger coil and magnet sizes provide more area for heat to dissipate, while venting allows thermal energy to escape and cooler air to enter the motor structure. Equally important is the ability of the voice coil to handle thermal energy. Eminence is well known for the use of proprietary adhesives and voice coil components that maximize the coil s ability to handle extreme temperatures. Mechanical factors must also be considered when determining power handling. A transducer might be able to handle 1,000 watts from a thermal perspective, but would fail long before that level was reached from a mechanical issue such as the coil hitting the back plate, the coil coming out of the gap, the cone buckling from too much outward movement, or the spider bottoming on the top plate. Be sure to consider the suggested usable frequency range and the Xlim parameter in conjunction with the power rating and enclosure design to avoid such failures. The Eminence power rating is derived using an EIA 426A noise source and test standard. All tests are conducted for 8 hours in a free-air, non-temperature controlled environment. The Eminence Music Program rating is double that of our standard Watts rating. designing enclosures Eminence Designer is a state-of-the-art loudspeaker enclosure design program for PCs. It can calculate a box design that will bring out the best response from a loudspeaker in seconds - it can even suggest a box for your loudspeaker! Eminence Designer models closed, vented, bandpass and passive radiator boxes. It will print box drawings and graphs for a professional presentation. Eminence designer is quick to learn and easy to use. 1. Enter the loudspeaker parameters (for Eminence loudspeakers, simply select the model; other loudspeaker parameters can be entered manually). 2. Calculate the box volume and tuning. This is very easy with the help of the Suggest button. 3. Evaluate the performance from the nine graphs. When the program is first run, a Welcome window will appear to help you configure the program and to guide you through its illustrated online manual. The online manual contains a Box Designers Guide to help beginners learn about sound, speakers and box design. A Reference section describe every feature of the program. 54 To learn more visit www.eminence.com.

eminence speaker llc P.O. Box 360 838 Mulberry Pike Eminence, KY 40019 Phone: 502.845.5622 Fax: 502.845.5653 E-mail: info@eminence.com www.eminence.com