SWING PATIO DOORS 15 SENTRY MULTI-POINT The market driven solution for operable sidelites Truth Hardware s Sentry Multi-Point Sidelite Hardware is the perfect complement to Truth s family of Sentry Patio Door products. FLEXIBLE The Sentry Sidelite Multi-Point Locking System can be customized into 3 point tongue or hook versions. Featuring modular design, this system easily accommodates different door sizes. RELIABLE Positive detent prevents handle sag over time, while corrosion resistant 300 series SST faceplate ensures the good looks and performance of the product for years to come. SMOOTH ERGONOMIC OPERATION Truth s operable sidelite hardware combines a convenient center latch with an ergonomic easy to operate handle. Operating the handle down by 90 degrees retracts all lock points while providing an easy to grip handle for opening and closing the panel. Releasing the handle allows for the center latch to reset providing automatic latching upon closure of the panel, this feature retains the panel against the weather strip to allow for easy engagement of the remote lock points. VISUALLY INTUITIVE The Sentry Sidelite System provides a visually intuitive indicator of the locked and unlocked status of the sidelite panel as shown below. When the handle is released after opening it will automatically return to the latched position. To engage the remote lock points, simply rotate the handle to the locked position. INSTALLATION FRIENDLY The center latch can be reversed with the hardware already installed in the sidelite. Truth s Sentry Sidelite System is available with 16 and 20 mm faceplates to fit standard eurogrooves. MATERIAL 300 series stainless steel. WARRANTY Protected under the terms of the Truth Warranty for Window and Door Manufacturers and Authorized Distributors. Refer to Truth s Terms and Conditions for further details. ORDERING INFORMATION Because of the variety of operable sidelite panel designs on the market, Truth Hardware suggests that you contact Truth s Application Specialist Department to help you identify the components that will best meet your requirements. To assist us in helping you identify the product that you need, please be prepared to provide Truth with the type and style of profile that you are mounting your hardware to. TRUTH TIPS 1. For easy correction of out of square or racked door installations, the use of Truth Jamb Jack frame adjusters are recommended. Frame adjustment can improve weatherseal tightness and door operation over the life of the door. 2. For vinyl applications, mounting screws should pass through two PVC walls or one PVC wall and one insert wall. For this reason, it may be necessary to use a longer screw than is recommended. 3. Solid shims are recommended behind jamb at all strike plate locations. 4. See Tech Notes for information dealing with care of plated decorative finishes. Engaged Locking Points Unlatched and Unlocked Latched and Unlocked 20.1
FIG. 1 SENTRY SIDELITE LOCKS 3 POINT TONGUE CONFIGURATION MATRIX 120" 108" 96" 84" 72" 60" 48" 36" 24" 12" 14237 (16mm) or 14239 (20mm) 14241 (16mm) or 14245 (20mm) Upper Bar Assembly 14237 (16mm) or 14239 (20mm) 14243 (16mm) or 14247 (20mm) 20.1a TONGUE VERSION
FIG. 2 SENTRY SIDELITE LOCKS 3 POINT TONGUE ASSEMBLIES FOR PANESL 71 INCHES TO 121 INCHES UPPER BAR ASSEMBLY UPPER BAR ASSEMBLY ENGAGEMENT PIN ATTACHMNET POINT #8 MOUNTING SCREW LOWER BAR ASSEMBLY LATCH BOLT CAN BE PULLED OUT AND ROTATED 180 WITH PLIERS FOR OPPOSITE HANDED DOORS DETAIL A HANDING OF LATCH BOLT TOUNGE VERSION SHOWN Available Strike Plates LOWER BAR ASSEMBLY Description Center Strike Plate (see figure 9) Remote Tongue Strike (see figure 11) Part Number 33611 33499 3 point System Lower Bar Assembly Backset 32mm Upper Bar Assembly Active Panel 16mm Face Plate 20mm Face Plate Unit Length 14237 14239 29.22 (742.2mm) Panel Height 71" 86" 14241 14245 28.07 (713.1mm) 86" 120" 14243 14247 42.01 (1067.1mm) 20.1b
FIG. 3 SENTRY SIDELITE LOCKS 3 POINT TONGUE PANEL PREPARATION.48 12.2.64 16.2.11.32 8.1 2.8.37 9.3 16mm EUROGROOVE DETAIL.80 20.2.40 10.1.48 12.2.11 2.8 "B" 2X.50 12.7 1.70 43.2.85 21.6 "A".37 9.3 20mm EUROGROOVE DETAIL 1.50 38.1 1.85 47.0 C.85 21.6 C 6.22 158.0 21.65 550.0 36.00 914.4 1.28 32.5 36.00 914.4 28.10 713.8.64 16.3 2.05 52.1 SECTION C-C STRIKE PLATE PANEL PREPARATION DOOR PREPARATION 20.1c Panel Height A Upper Tongue Rout B Upper Strike Location 71" 86" i 25.19 (639.7) 27.04 (686.7) 86" 121" 39.12 (993.7) 40.97 (1040.7)
FIG. 4 SENTRY SIDELITES LOCKS 3 POINT TONGUE LOWER BAR ASSEMBLY 2.01 51.1 HOLE FOR UPPER BAR ENGAGEMENT PIN 1.27 32.2 MOUNTING HOLE 1.19 30.1 1.85 47.0 6.97 177.0 1.70 43.2 5.52 140.2 A.28 7.1 2.41 61.2.85 21.6.46 11.6 23.50 597.0 5.79 147.0 29.22 742.2 DETAIL A SCALE 1 : 2 28.10 713.7 5.79 147.0 7.48 190.0.46 11.8.10 2.5 FACEPLATE WIDTH ( SEE CHART ) R 1.57 40.0 5X #8 FLAT HEAD SCREWS LENGTH AND THREAD TYPE DETERMINED BY PROFILE Tongue Lower Bar Assembly 16mm Face Plate 20mm Face Plate 14237 14239 20.1d
FIG. 5 SENTRY SIDELITE LOCKS 3 POINT TONGUE UPPER BAR ASSEMBLY 7X #8 FLAT HEAD SCREWS LENGTH AND THREAD TYPE DETERMINED BY PROFILE R.74 18.8 FACEPLATE WIDTH 8.58 218.0 5X #8 FLAT HEAD SCREWS LENGTH AND THREAD TYPE DETERMINED BY PROFILE R 28.07 713.1 8.24 209.2 8.58 218.0 24.06 611.2 42.01 1067.1 6.50 165.0 38.00 965.2 8.23 209.0 6.50 165.0 6.50 165.0 6.50 165.0 2.41 61.2 3.35 85.0.79 20.0 ENGAGEMENT PIN FOR ASSEMBLING UPPER UNIT TO LOWER UNIT.79 20.0 ENGAGEMENT PIN FOR ASSEMBLING UPPER UNIT TO LOWER UNIT UPPER BAR ASSEMBLY 71" - 86" Panel Height UPPER BAR ASSEMBLY 86" - 121" Panel Height Tongue Upper Bar Assembly 20.1e Panel Height 16mm Face Plate 20mm Face Plate 71" 86" 14241 14245 86" 121" 14243 14247
FIG. 6 SENTRY SIDELITE LOCKS 3 POINT HOOK CONFIGURATION MATRIX 120" 108" 96" 84" 72" 60" 48" 14240 (16mm) or 14244 (20mm) 14242 (16mm) or 14246 (20mm) 36" 24" 12" 14236 (16mm) or 14238 (20mm) 14236 (16mm) or 14238 (20mm) HOOK VERSION HOOK VERSION 20.1f
FIG. 7 SENTRY SIDELITE LOCKS 3 POINT HOOK ASSEMBLIES FOR PANELS 71 INCHES TO 121 INCHES UPPER BAR ASSEMBLY ENGAGEMENT PIN ATTACHMENT POINT UPPER BAR ASSEMBLY #8 MOUNTING SCREW LOWER BAR ASSEMBLY LOWER BAR ASSEMBLY DETAIL A HANDING OF LATCH BOLT LATCH BOLT CAN BE PULLED OUT AND ROTATED 180 WITH PLIERS FOR OPPOSITE HANDED DOORS Description Center Strike Plate (see figure 9) Remote Hook Strike (see figure 13) Part Number 33611 33505 3 point System Lower Bar Assembly Backset 32mm Upper Bar Assembly Active Panel 16mm Face Plate 20mm Face Plate Unit Length 14236 14238 29.22 (742.2mm) Panel Height 71" 86" 14240 14244 28.07 (713.1mm) 86" 120" 14242 14246 42.01 (1067.1mm) 20.1g
FIG. 8 SENTRY SIDELITE LOCKS 3 POINT HOOK PANEL PREPARATION.48 12.2.64 16.2.11.32 8.1 2.8.37 9.3 16mm EUROGROOVE DETAIL.80 20.2.40 10.1.48 12.2.11 2.8 "B" 2X.50 12.7 1.70 43.2 C C.85 21.6 "A".37 9.3 20mm EUROGROOVE DETAIL 21.32 541.7 1.85 47.0 36.00 914.4.85 21.6 1.28 32.5 D D 23.24 590.2.64 16.2 2.05 52.1.64 16.3 SECTION C-C STRIKE PLATE PANEL PREPARATION DOOR PREPARATION SECTION D-D Panel Height A Upper Hook Rout Location B Upper Strike Location 71" 86" 24.34 (618.2) 26.25 (666.7) 86" 121" 38.28 (972.2) 40.19 (1020.7) 20.1h
FIG. 9 SENTRY SIDELITE LOCKS 3 POINT HOOK LOWER BAR ASSEMBLY 1.19 30.1 2.01 51.1 1.27 32.2 HOLE FOR UPPER BAR ENGAGEMENT PIN MOUNTING HOLE 5.52 140.2 1.85 47.0 A 6.97 177.0 2.41 61.2.85 21.6 1.70 43.2.28 7.1 23.24 590.2 1.71 43.5 28.10 713.7 5.79 147.0 5.79 147.0 25.91 658.0 29.22 742.2 DETAIL A SCALE 1 : 2.50 12.7 2.56 65.0 5.12 130.0 7.48 190.0 5X #8 FLAT HEAD SCREWS LENGTH AND THREAD TYPE DETERMINED BY PROFILE.46 11.8.10 2.5 FACEPLATE WIDTH ( SEE CHART ) 1.57 40.0 R Hook Lower Bar Assembly 16mm Face Plate 20mm Face Plate 14236 14238 20.1i
FIG. 10 SENTRY SIDELITE LOCKS 3 POINT HOOK UPPER BAR ASSEMBLY 7X #8 FLAT HEAD SCREWS LENGTH AND THREAD TYPE DETERMINED BY PROFILE R.91 23.1 1.71 43.5 FACEPLATE WIDTH ( SEE CHART ) 8.58 218.0 5.12 130.0 2.56 65.0 5X #8 FLAT HEAD SCREWS LENGTH AND THREAD TYPE DETERMINED BY PROFILE R.91 23.1 1.71 43.5 8.24 209.2.52 13.3 42.01 1067.1 8.58 218.0 28.07 713.1 2.56 65.0 5.12 130.0 6.50 165.0 37.15 943.7.52 13.3 8.23 209.0 23.22 589.7 6.50 165.0 6.50 165.0 6.50 165.0 2.41 61.2 3.35 85.0.79 20.0 UPPER BAR ASSEMBLY 71" - 86" Panel Height Hook Upper Bar Assembly ENGAGEMENT PIN FOR ASSEMBLING UPPER UNIT TO LOWER UNIT.79 20.0 ENGAGEMENT PIN FOR ASSEMBLING UPPER UNIT TO LOWER UNIT UPPER BAR ASSEMBLY 86" - 121" Panel Height Panel Height 16mm Face Plate 20mm Face Plate 71" 86" 14240 14244 86" 121" 14242 14246 20.1j
FIG. 11 SENTRY SIDELITE LOCKS 33611 CENTER STRIKE PLATE 3.00 76.2.56 14.3 1.50 38.1 1.19 30.2 R.27 6.9.24 6.0.66 16.8.56 14.3 1.74 44.1 1.43 36.2.17 4.3.63 15.9 1.25 31.8 2.38 60.3 2X R.44 11.0.06 1.5 SCREWS: 2X #10 FLAT HEAD. ( LENGTH AND THREAD TYPE DETERMINED BY PROFILE ) FIG. 12 SENTRY SIDELITE LOCKS CENTER STRIKE PANEL PREPARATION.08 2.0.50 12.7.74 18.8 R.37 9.4 R.44 11.2 2.38 60.5 1.19 30.2.87 22.1 1.51 38.3 3.02 76.7 1.42 36.1.52 13.2 20.1k
FIG. 13 SENTRY SIDELITE LOCKS 33499 REMOTE TONGUE STRIKE SCREWS: 2X #10 FLAT HEAD (LENGTH AND THREAD TYPE DETERMINED BY PROFILE).51 13.0.25 6.5.16 4.2 2X.60 15.2.07 1.8 3.90 99.0 1.95 49.5 1.57 40.0.79 20.0 1.44 36.5 2.87 73.0 2X R 1.19 30.3.23 5.8.32 8.1 NOTES: 1. NON-HANDED STRIKE IS OFFSET TO PROVIDE 2 PULL-IN OPTIONS 2. SEE FIG. 12 FOR PANEL PREPARATION FIG. 14 SENTRY SIDELITE LOCKS REMOTE TONGUE STRIKE PANEL PREPARATION 20.1l
FIG. 15 SENTRY SIDELITE LOCKS 33505 REMOTE HOOK STRIKE SCREWS: 2X #10 FLAT HEAD (LENGTH AND THREAD TYPE DETERMINED BY PROFILE).13 3.4.07 1.8 2.00 50.8 1.50 38.1 3.00 76.2 4.00 101.6.79 20.0 1.57 40.0 2X R 1.00 25.4.19 5.0.50 12.7 NOTES: 1. NON-HANDED STRIKE IS OFFSET TO PROVIDE 2 PULL IN OPTIONS 2. SEE FIG. 14 FOR PANEL PREPARATION FIG. 16 SENTRY SIDELITE LOCKS REMOTE HOOK PANEL PREPARATION.62 15.7 1.02 25.9.08 2.0 1.00 25.4 R.51 13.0 R.31 7.9 3.00 76.2 1.17 1.50 29.6 38.1 2.01 51.1 4.02 102.1 2.34 59.4.31 7.9.51 13.0 20.1m
FIG. 17 14207 SENTRY SIDELITE HANDLE Ø.43 10.83 2.21 56.21 1.19 30.23 2.90 73.66 1.43 36.32 2X.50 12.70 FIG. 18 SENTRY SIDELITE LOCKS DOOR PANEL PREPARATION 1.28 32.51.88 22.23 Ø.50 12.70 Ø.85 21.59 1.50 38.10 36.00 914.40 DISTANCE FROM HANDLE TO BOTTOM OF PANEL.85 21.59 1.70 43.18 HANDLE AND ESCUTCHEON MOUNTING SCREWS 20.1n
20.1o 700 WEST BRIDGE STREET, OWATONNA, MN 55060 507.451.5620 800.866.7884 TRUTH.COM