Doc No. A4-ZZ-00 Revision. Established : 07-0-0 Revised : 07-05-3 For rectification Features Low forward voltage VF Forward current (Average) IF(AV) 5.0 A rectification is possible RoHS compliant (EU RoHS / MSL:Level compliant).60.60 Unit: mm Marking Symbol: E6.60.60 Packaging Embossed type (hermo-compression sealing) : 0 000 pcs / reel (standard) Absolute Maximum Ratings Parameter Symbol Min Max Unit Reverse Voltage * VR - 40 V Maximum Peak Reverse Voltage * VRM - 40 V Average Forward Current *,3 IF(AV) - 5.0 A Non-repetitive Peak Surge Forward Current *,4 IFSM - 40 A Operating Junction emperature *5 j - 50 C Ambient emperature a -40 +50 C Storage emperature stg -55 +50 C Note) *: a = j = 5 *: Square wave : σ = 0.5 *3: Solder Point emperature : sp *4: Square wave : p = 5 ms *5: Power derating is necessary so that j < 50. Electrical Characteristics a = 5 C ± 3 C Parameter Symbol Conditions Min yp Max Unit Forward Voltage VF IF = 5.0 A - 0.5 0.6 V Reverse Current IR VR = 40 V - 5 00 μa erminal Capacitance Ct VR = 0 V, f = MHz - 40 - pf Reverse Recovery ime * trr IF = IR = 00 ma, Irr = 0 ma - 45 - ns Note). Measuring methods are based on JAPANESE INDUSRIAL SANDARD JIS C 703 measuring methods for diodes.. his product is sensitive to electric shock (static electricity, etc.). Due attention must be paid on the charge of a human body and the leakage of current from the operating equipment. 3. *: Measurement circuit, input pulse, output pulse for Reverse recovery time (Measurement circuit) (Input pulse) (Output pulse) DU tr tp 0% t (0.45) 0.35 (0.45).0.0 (0.45) (0.45). Cathode. Anode Panasonic JEIA DCSP6600-N Code p IF IF 0.35 trr p 0.75 (R0.75) ime 0.75 (R0.75) t VR 90% IR Irr = IR 0 Bias Insertion Unit (N-50BU) tp = μs IF = 00 ma Pulse Generator (PG-0N), RS = 50 Ω tr = 0.35 ns IR = 00 ma Wave Form Analyzer (SAS-830), Ri = 50 Ω σ = 5 Irr = 0 ma of 8
Doc No. A4-ZZ-00 Revision. Established : 07-0-0 Revised : 07-05-3 Electrical Characteristics echnical Data (Reference) IF - VF / ypical Data Ct - VR / ypical Data.0E+0 000 900 Forward Current : IF [A].0E+00.0E-0.0E-0.0E-03 erminal Capacitance : Ct [pf] 800 700 600 500 400 300 00 00.0E-04 0 0 0. 0. 0.3 0.4 0.5 0.6 0.7 0 0 0 30 40 Forward Voltage : VF [V] Reverse Voltage : VR [V] IR - VR / ypical Data.0E-0.0E-0.0E-03 a = a = a = a = a = 50 5 85 5-40 Reverse Current : IR [A].0E-04.0E-05.0E-06.0E-07.0E-08.0E-09.0E-0 0 0 0 30 40 Reverse Voltage : VR [V] of 8
Doc No. A4-ZZ-00 Revision. Established : 07-0-0 Revised : 07-05-3 Electrical Characteristics echnical Data (Reference) PF(AV) - IF(AV) / ypical Data 5.0 Average Forward Power Dissipation : PF(AV) [W] 4.5 4.0 3.5 3.0.5.0.5.0 0.5 j = 5 C IF p ime p σ=.0 σ= 0.8 σ= 0.5 σ= 0.3.0.0 3.0 4.0 5.0 6.0 7.0 8.0 PR(AV) - VR / ypical Data 000 Average Reverse Power Dissipation : PR(AV) [W] 0080 0060 0040 000 j = 5 C VR p σ=.0 σ= 0.7 σ= 0.5 σ= 0. ime p 0000 0 0 0 30 40 Reverse Voltage : VR [V] 3 of 8
Doc No. A4-ZZ-00 Revision. Established : 07-0-0 Revised : 07-05-3 Electrical Characteristics echnical Data (Reference) PF(AV) - IF(AV) / ypical Data 5.0 Average Forward Power Dissipation : PF(AV) [W] 4.5 4.0 3.5 3.0.5.0.5.0 0.5 j = 50 C IF p σ=.0 σ= 0.8 σ= 0.5 σ= 0.3 ime p.0.0 3.0 4.0 5.0 6.0 7.0 8.0 PR(AV) - VR / ypical Data 0.50 Average Reverse Power Dissipation : PR(AV) [W] 0.40 0.30 j = 5 C VR p σ=.0 σ= 0.7 σ= 0.5 σ= 0. ime p 0 0 5 0 5 0 5 30 35 40 45 Reverse Voltage : VR [V] 4 of 8
Doc No. A4-ZZ-00 Revision. Established : 07-0-0 Revised : 07-05-3 hermal Characteristics Parameter Symbol Conditions Min yp Max hermal Resistance, Junction to Solder Point R th(j-sp) a = 5, in free air - 8 - Unit C/W hermal Resistance, Junction to Ambient * R th(j-a) a = 5, in free air - 43 - C/W hermal Resistance, Junction to Ambient * R th(j-a) a = 5, in free air - 50 - C/W Note) *: Device mounted on Ceramic substrate (70mm 70mm t.0mm). *: Device mounted on a FR4 PCB (5.4mm 5.4mm, mm thick), copper wiring (50.7mm area, 36μm thick). Copper wiring (50.7mm ) 70mm 5.4mm Ceramic substrate 70mm FR4 PCB 5.4mm hermal Characteristics echnical Data (Reference) 000 Rth - * / ypical Data hermal Resistance : Rth [/W] 00 0 0 0. 0 00 000 Applying ime : [s] Note) *: Single pulse measurement Device mounted on a FR4 PCB (5.4mm 5.4mm, mm thick), copper wiring (50.7mm area, 36μm thick). Power Device mounted on Ceramic substrate (70mm 70mm t.0mm). ime Applying ime : 5 of 8
Doc No. A4-ZZ-00 Revision. Established : 07-0-0 Revised : 07-05-3 hermal Characteristics echnical Data (Reference) Effective ransient hermal Resistance [/W] Effective ransient hermal Resistance [/W] Note) 000 00 0 000 00 0 Effective ransient hermal Resistance - p * / ypical Data (6) 00 0 0. 0 00 000 p [s] Effective ransient hermal Resistance - p * / ypical Data σ = 0.5 σ = 0. σ = 0. σ = 5 σ = (6) σ = 0 σ = 0.5 σ = 0. σ = 0. (6) σ = 5 σ = 00 0 0. 0 00 000 (6) σ = 0 p [s] *: Device mounted on a FR4 PCB (5.4mm 5.4mm, mm thick), copper wiring (50.7mm area, 36μm thick). *: Device mounted on Ceramic substrate (70mm 70mm t.0mm). Power Power p p ime p ime p 6 of 8
Doc No. A4-ZZ-00 Revision. Established : 07-0-0 Revised : 07-05-3 Power Derating echnical Data (Reference) IF(AV) - a * / ypical Data IF(AV) - a * / ypical Data.0 8.0.8.6.4..0 0.8 0.6 0.4 j =50 C 7.0 6.0 5.0 4.0 3.0.0 j =50 C 0..0 0 5 50 75 00 5 50 0 5 50 75 00 5 50 Ambient emperature : a [] Ambient emperature : a [] IF(AV) - sp / ypical Data 8.0 7.0 j =50 C σ =.0 σ = 0.8 σ = 0.5 IF p 6.0 5.0 4.0 3.0.0.0 σ = 0.3 Note) *: Device mounted on a FR4 PCB (5.4mm 5.4mm, mm thick), copper wiring (50.7mm area, 36μm thick). *: Device mounted on Ceramic substrate (70mm 70mm t.0mm). ime p 0 5 50 75 00 5 50 Solder Point emperature : sp [] 7 of 8
Doc No. A4-ZZ-00 Revision. Established : 07-0-0 Revised : 07-05-3 DCSP6600-N Unit: mm.60±3 0.35±3.0±3 0.75 ± (0.45).60±3 (0.45) (R0.75) Land Pattern (Reference) Unit: mm 0.35.0 0.75 (R0.75) 8 of 8
Request for your special attention and precautions in using the technical information and semiconductors described in this book If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. he technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. herefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information de-scribed in this book. he products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Please consult with our sales staff in advance for information on the following applications, moreover please exchange documents separately on terms of use etc.: Special applications (such as for in-vehicle equipment, airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, medical equipment and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Unless exchanging documents on terms of use etc. in advance, it is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application. he products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most upto-date in advance to make sure that the latest specifications satisfy your requirements. When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. We do not guarantee quality for disassembled products or the product re-mounted after removing from the mounting board. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) When reselling products described in this book to other companies without our permission and receiving any claim of request from the resale destination, please understand that customers will bear the burden. (8) his book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. No.0068