BasePac MfM Design administration Sorted in folders Design entry with design number, name, customer s name, no. of stitches, type and date Pictogram directory Delete, copy and move designs Design header Histogram of machine functions Search function, for all design entries individually or according to independent criteria Thread consumption table for all needles Reading and Writing of a large variety of disc formats Code-conversion from/to all eistent multihead stitch data format Backup/Restore function, the designs remain in the directories Replacing stop with needle change function in stitch data designs Assign the original thread color to the needles Set up design collection File-Functions Open a new or eisting design Store the design on any drive under windows Store design anew with another version number EPC-connection (Reading and writing of designs in the ZSK EPC via network) Store designs to ZSK embroidery machine memory Connecting right to ZSK and Toyota embroidery machines Import of eisting designs to current designs Sending designs with E-Mail Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 1 of 11
BasePac MfM Print functions Print out designs Best adjusting of the design to page size Printing with realistic thread colors which can be selected from a color-table Printing large designs on several pages Free positioning the design on the page Printing of thread consumption table Printing of design header Printing of comment Printing histogram of special functions True View realistic view of the design in single print mode Printing design catalogue True View realistic view of designs in catalogue mode Fade in fabric designs in the background Print as Repeat view for multihead designs with single head selection Editing designs Multi Undo / Redo with adjustable step count for all functions Moving designs Scale up/down designs without density compensation (centered, proportional, independent) Scale up/down designs with density compensation Rotate/slant design All functions can be set numerically or graphically Frame library. Frames with variable boldness and density Store standard-parameters for frames Define your own frames Fill frames from library with fill stitches Copy and insert of designs from the clipboard Open several designs at the same time Open several windows of the same design (also in different zoom levels) Select zoom level independently, with zoom factor or fitting design/block to screen Permanent display of design size, no. of stitches, zoom level and cursor position Display of start- and endpoint. Also possibility to define start-/endpoint Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 2 of 11
BasePac MfM Edit stitches Delete/ insert of single stitches Moving/shifting of stitches Insert of double stitches Search for stitch number Search for stitches with a certain length Search for machine functions Delete/ Insert of machine functions Display of machine functions graphically, selectable by choice Cleaning (sum up small stitches) Optimize (sum up jump stitches) Alphanumerical stitch display Recalculation of the design Satin stitch correction Changing stitch division Edit blocks Create blocks at current stitch position Create blocks automatically Connect all blocks Delete blocks Move/shift blocks Scale up/down blocks without density compensation for stitch data Scale up/down blocks with density compensation for stitch data Scale up/down blocks including recalculation based on coordinate data Rotate/slant blocks Copy blocks Copy block with 3-point copy feature Block selection with film strip Center blocks Embroider block backwards Group/ungroup blocks Change order of embroidery block by block Block structure is stored with the design Standardize block Duplicate block with self-defined shift vector Fading out blocks Set trimming, stops or needle changes at the beginning of a block Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 3 of 11
BasePac MfM 2 fonts (GiS Swiss and GiS Swiss small) 128 fonts Import of TrueType fonts Free choice of filling of TrueType fonts or bordering with satin or running stitches. Closest point or any connection with TT fonts Free tack and lock stitches at TrueType fonts TT- for modifying the fonts All fonts with any kind of size, boldness and slant angle Any density you like Zigzag, centerline or contour under layers Multi line input of tet, left-/center- or right-aligned Various division modes: Center, regular or irregular Thread trimming/ lock stitches by choice Input of tet in original size directly at desired position Mark and overwrite words with constant parameters Scale up/down, rotate, slant tet with bo function or numerically Place tet on straight lines, circles or any kind of curve with the facility to adjust letter -size, -width and distance Writing and editing tet directly on curves Shifting the tet along the curve Shifting of single letters along the curve Shifting a tet beginning with a certain letter Selectable distance from the curve Writing on, above and below the curve Letters vertical on the curve ( stairs) Envelope-function with edit facilities Parameters for standard fonts can be stored Center tet to frame Changing order of embroidery for tet and frames Duplicate tet and frames with self defined shift vector Convert tet to stitch data Convert tet into reference data Editing the reference data of the letters Filling letters with stencils or macros TrueType Font Create a font from a Picture Editing the single outline points Editing the stitch directions Changing the contour cuts Changing header and trailer spacing Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 4 of 11
BasePac MfM Template Assistant for production of badges on ribbons and large frames Import of the names from a tet file Automatic adjustment of the name s length Input of the distance and the order of embroidery of the single badges in the hoop Definition of a border and an additional design Definition of multiple tet fields in one template Import of piel designs and.emf-files Optimizing the piel data Transforming into vector data Automatically transforming into punch data and calculating stitches Use the optimized data as background picture Use the vector data as drawing lines Changing the order of embroidery Modification of all parameter Automatic Under layer Filling of colored drawing areas with step or satin stitches Calculating a Stepp stitch or satin line on a drawing line in the drawn color Drawing Self defined curves or straight lines with/without corner attribute Edit a curve point Shifting the complete curve Shifting a group of curve points Freehand drawing for artistic work Define circles by entering center-point and radius Define circles by entering 3 points Enter arcs of a circle assigning individual colors to lines Create parallel curves Enter graphic primitives (rectangle...) Adopt drawing lines as coordinate data and vice versa Import of.df,.ai,.wmf and.emf-files Split and connect drawing lines Group/ungroup lines Bo feature for drawing lines Convert graphic primitives in drawing lines Optimizing lines Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 5 of 11
BasePac MfM Punching on-screen Punching with digitizer Freehand punching for artistic work Input modes manual Pair wise Center line Outer contour Step stitch line Comple Fill Satin stitches with outer contour input, automatic calculation of contour cuts and stitch directions Predefined stitch calculation modes: Satin stitch, step stitch with rhythm 1-4, irregular; single running lines Variable stitch calculation modes: choose between stitch division mode center, rhythmic, irregular, regular choose between edge mode zigzag, irregular, acute, obtuse Shortened Stitches in corners Curve/ straight line input Closed curve attribute for smoothening curves Convert centerline coordinates to pair wise coordinates Set the outer contour endpoint at any position Input of holes Input of any stitch direction Input of division lines Set corner attribute by double clicking Pull compensation Overlap Swing on covering stitches Adjust density ramps according to your needs Automatic fill under layers with all fill modes, only single under layers. Input any under layer-distance from outer contour edge, density and stitch length, Automatic fill under layers with all fill modes, either single or double under layers. Input any under layer-distance from outer contour edge, density, swing, stitch length and angle relating to cover stitch direction Automatic contour under layers with any fill mode. Input any under layer distance from outer contour edge and stitch length. Automatic contour under layers with any fill mode. Input any under layer distance from outer contour edge, stitch length, swing and order in conjunction with fill under layers Centerline input with variable width and variable Stitch direction Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 6 of 11
BasePac MfM Single running line Stitch repeat mode in step stitch lines Multiple running lines Enter swing and shift for every pass separately E-Stitch with variable angle and length Shortened stitches in curves Save stitch modes (parameter sets). Access via stitch mode menu Clean coordinates Save self-defined macros Place macros on running lines Macro with special functions (e.g.: Sequins) possible Choose any height and width Select any distance between macros Fit macro eactly to the running line length Definition of design blocks Alter every coordinate point at any time Recalculation of the design block wise with different parameter set. Recalculation of the design completely or block wise with a global parameter set. Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 7 of 11
BasePac MfM Stitch division mode by input of an angle Set the endpoint with centerline or pair wise input mode at any position Input of islands Input of additional contours Input of any stitch direction Input of several straight stitch direction lines to create a turned step stitch Input of several wavy stitch direction lines Pair wise or centerline input with branches Running lines with branches Pull compensation with branches Separate density for every stitch direction line in outer contour input mode in order to create continuous density changes Stencil stitch division on areas with comple fill and holes Select any shifting and size of stencils Stencil and step division mode can be combined together, inside, outside, always Save self-defined stencils Macro fill on outer contour areas with comple fill and holes Height and width of macros adjustable Macro with special functions (e.g.: Sequins) possible Mirror and distance between macro lines as you like Select any shifting of macros Select any distance between macros Turned step stitch with comple fill and holes Wavy step with comple fill and holes Stencils on turned step areas with comple fill Stencils on wavy step areas with comple fill Sequin automatic on lines Interlocking stitch Interlocking line automatic creation Irregular stitch length at running lines Irregular swing at running lines Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 8 of 11
BasePac MfM Background picture Import bitmap images in various formats Display/hide background image Change size of background image via bo feature Change size referring to a part of the image (scaling) Rotate and slant the background image Adjust contrast and brightness Fade out colors of the background image Auto-Trace Display features Show/ hide needles Show/ hide blocks Show/ hide coordinates Display in different colors Show coordinate points in different sizes Set coordinates in front of/ behind the stitches Display only current automatic Show/ hide stitches Show/hide stitch in points Display stitches in different colors Display tet in fill mode with needle color Display tet with stitches Display tet with coordinate data Horizontal and vertical rulers Length measurement feature with ruler Display punch contours as curves Rubber band feature Large crosshairs cursor Display start/endpoint Draw design with respect to order of embroidery Display part of the design from stitch no.. to stitch no. Redraw the design Choice between 3 color schemes: original design colors, Display colors, standard colors Set blocks to the front/ to the back Adjust all colors as you like: helpline colors, coordinate True View effect Repeat view for multihead designs with single head selection Repeat grid for multihead designs with single head selection Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 9 of 11
BasePac MfM User interface Large worksheet, distinct structure and display of only those tools which are available at a given time. Position the toolbar horizontally, vertically or anywhere within the worksheet The most important functions are accessible with buttons Parameter window with preview feature Select zoom levels numerically or with zoom buttons Automatic scrolling in insert mode when reaching the end of the working area Dragging of horizontal and vertical help lines out of the rulers Grid with selectable distance Select important functions with shortcuts Online help system Magister Tutorial Software Quick start Monitor scaling in mm Display buttons small/large Toolbar, status line, show/ hide ruler Available languages : German, English, French, Italian, Portuguese, Spanish, Turkish, Chinese, Hungarian Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 10 of 11
Shiffli Shiffli Shiffli Converter Shiffli Functions Editing all Shiffli machine functions Editing repeat pattern with free needle pattern Input of tet in the design Converting Lässer discs Converting Hiraoka discs Converting ZSK-NC discs (Shiffli) Repeat view Repeat grid Checking shiffli designs Printing shiffli designs (with ) Shiffli punch (with Punch1) Etended options Eport Etended Technical embroidery Eport Etended Direct eport to different disk formats Automatic design name creation Automatic transfer of all pages of a template Technical embroidery Conversion of fill are to running lines Split running lines combine running lines Rounded edge Islands without stitch on the contour Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fa: 07026-606-66 Email: basepac@gis-net.de 12/12 Page 11 of 11