Cree SMD LED Model # LM1-PPG1-01-N1 Data Sheet 120-degree, 3.2 x 2.7 mm, SMT LED in green color with water-transparent lens Applications Indicators Illuminations LCD Back Lights Automobile Applications RGB Full-Color Displays Absolute Maximum Ratings (T A = 25 C) Items Symbol Absolute Maximum Rating Unit Forward Current 25 ma Peak Forward Current Note 1 P 100 ma Reverse Voltage V R 5 V Power Dissipation P D 100 mw Operation Temperature T opr -40 ~ +100 C Storage Temperature T stg -40 ~ +100 C Junction Temperature T J 110 C Junction/Ambient Note 2 R THJA 450 C/W Junction/Solder Point R THJS 300 C/W Notes: 1. Pulse width 0.1 msec, duty 1/10. 2. Rth test condition: mounted on PCB FR4 (pad size 16 mm 2 ) Typical Electrical & Optical Characteristics (T A = 25 C ) Characteristics Symbol Condition Unit Minimum Typical Maximum Forward Voltage V F = 20 ma V 3.4 4.0 Data Sheet: CLD-CT147.000 Reverse Current I R V R = 5 V μa 10 Luminous Intensity I V = 20 ma mcd 355 560 Dominant Wavelength λ D = 20 ma nm 520 527 540 50% Power Angle 2θ½ = 20 ma deg 120 Subject to change without notice.
Standard Bins for LM1-PPG1-01-N1 ( = 20 ma) Lamps are sorted to luminous intensity (I V ) and dominant wavelength (λ D ) bins shown. Orders for LM1-PPG1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (I V ) and dominant wavelength (λ D ) values shown and specified are at = 20 ma. X7 X8 X9 X10 Luminous Intensity (I V ) 900 mcd 710 mcd 560 mcd 450 mcd 355 mcd 520 nm 525 nm 530 nm 535 nm Dominant Wavelength (λ D ) 540 nm V2 or above V1 U2 U1 T2 Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. 4. Tolerance of measurement of V F is ±5 V. 5. Packaging methods are available for selection; please refer to the Cree LED Lamp Packaging Standard document. 6. Please refer to the Cree LED Lamp Reliability Test Standards document for reliability test conditions. 7. Please refer to the Cree LED Lamp Soldering & Handling document for information about how to use this LED product safely. Copyright 2007 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of 2 CLD-CT147.000
Graphs 10 8 6 4 2 3.0 If (ma) 3.4 3.8 4.2 4.6 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. 5.0 Vf(V) Vr(V) -50-40 -30-20 -10 0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -1-2 -3-4 -5 5.0 4.0 3.0 2.0 1.0 2 4 6 FORWARD CURRENT 8 10 If(mA) FIG.3 RELATIVE LUMINOUS INTENSITY VS. 100% 75% 50% 25% Half Power WL=38nm Domi WL= 527nm 0% 300 400 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. WL(nm) 500 600 700 50 40 30 20 IF(mA) Rth j-s=300 C/W 50% Power Angle : 0 Ie(%) 100% 80% 60% 10 Rth j-a=450 C/W 0 T ( C) 0 20 40 60 80 100 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C -90-60 -30 0 30 FIG.6 FAR FIELD PATTERN 60 40% 20% 90 0% Copyright 2007 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of CLD-CT147.000
Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright 2007 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of 4 CLD-CT147.000
Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the Cree LED Lamp Packaging Standard document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom V F 0: Full forward voltage distribution aaaaaaaaa-aaa-aa- x x x x x Wd/Color 1: Full-color distribution 2~9, A~Z... : special request * I V0: Full luminous intensity distribution Packing type 0: Standard = tape pack Product P/N * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM1-PPG1-01-N1-00001 Description SMD 120 Pure Green 527nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright 2007 All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of 5 CLD-CT147.000