PD-LD Inc. offers a variety of packaging options for its Visible Series of laser diodes. These units are available in ready-to-use, fiber-coupled packages, including FC, ST, and SC receptacles, as well as fiber- pigtailed units. Standard wavelengths are centered at 630nm, 650nm and 670nm. Fiber-coupled CW (continuous-wavelength) output powers range from 0.1-10 mw, depending on the fiber type and desired performance level. Devices may be optimized for coupling to sensor or telecommunication size optical fiber, from 3um to 200um core. Applications Fiber optic communications Optical Sensing Process Control Test and Measurement Equipment Optical Alignment Systems Fiber Size and Coupling Efficiency 3/125um 8~10 5/125um 10~15% 9/125um 15~20% 50/125um 25~30% 62.5/125um 30~40% Performance Specifications (Examples; other options available) PD-LD Part No. 1 Wavelength (nm) Min. Typ. Max. Continuous Wavelength Lasers @ 25C PL63A001FC11-T-0 630 635 640 PL63C005100A-0-0-01 625 635 640 PL63K002FC26-T-0 630 636 642 PL63H003300A-0-0-01 625 635 640 PL65T0.8UN11-T-0 640 650 660 PL65Q0.8UN11-T-0 640 650 660 PL65T0.36LAD-A-0-01 640 650 660 PL65R005FC14-T-0 645 655 660 PL65Q0.8UN11-T-0 645 650 660 PL65U005FC11-T-0 655 665 PL66N0026FCA-0-0-01 645 658 666 PL66N005100A-0-0-01 645 658 666 Min. Fiber Coupled Power (mw) 1mW Into 9/125 SMF 5mW into 9/125 SMF 2mW Into 3/125um SMF 3mW 62.5/125 MMF 0.8 mw into 9/125 SMF 0.8mW Into 9/125 SMF 0.3 mw Into 3/125 SMF 5mW Into 100/140 MMF 0.8mw Into 9/125 SMF 5mW Into 9/125 SMF 2.0 mw into 3/125 SMF 5 mw into 9/125 SMF Threshold Current (ma) Typ. Max. Operating Current (ma) Typ. Max. Monitor PD Current (ma) Min. Typ. 30 50 40 60 0.02 0.07 50 75 70 95 0.05 0.17 60 70 87 105 0.03 0.50 45 70 55 85 0.2 0.4 15 20 20 22 0.05 0.3 40 70 50 80 0.10 0.20 15 20 20 22 0.05 0.3 25 60 35 70 0.1 0.5 30 40 40 50 0.1 0.5 40 50 80 110 0.1 0.3 45 70 85 120 0.05 0.3 45 70 85 120 0.05 0.3
Packaging Options Optional board- or panel - mount flanges are available for pigtailed devices; contact PD-LD Sales. Also, PD-LD Inc. will package non-standard lasers or parts specified by a customer using standard or custom receptacle or pigtailing techniques. I n may case several different pin-out options are available for similar wavelength lasers. Absolute Maximum Ratings (Tc=25 C) Parameter Symbol Value Unit LD Reverse Voltage V R(LD) 2 V PD Reverse Voltage V R(PD) 30 V Operating Temperature T OPR -10 to 60 C Storage Temperature T STR -40 to 85 C Soldering Temperature T Solder 260 C (5 seconds max)
PD-LD Laser Code Visible Laser Diodes Available from Stock Nominal Wavelength (nm) TO Package Size Laser Pinning Maximum Total Power (mw)* 63A 635nm +/-5nm 5.6mm N 5.0 63C 635nm 10/+5nm 9.0mm N 10.0 63K 636nm +/-6nm 5.6mm N 20.0 63H 633nm+/-8nm 9.0mm N 5.0 65A 655nm+/-5nm 5.6mm P 7.0 65P 655nm+/-10nm 5.6mm P 7.0 65Q 650nm+/-10nm 5.6mm P 7.0 65R 655nm+5nm/-10nm 5.6mm M 10.0 65S 658nm+/-10nm 5.6mm N 45 65T 650nm+/-10nm 5.6mm N 5.0 65U 658nm+/-8nm 5.6mm N 40.0 65V 655nm +5/-10nm 5.6mm P 5.0 66B 658nm +/-4nm 5.6mm N 100.0 66N 658nm+7nm/-13nm 5.6mm P 35.0 67G 690nm+5/-10nm 5.6mm P 30.0 67T 670nm+/-10nm 5.6mm N 12.0 * The power listed is the total light output from the semiconductor laser chip as measured from the discreet TO package. The amount of light coupled into the optical fiber Please contact PD-LD Sales to discuss wavelength, pinning and power requirements not
Data Legend: Pigtailed Visible Lasers PL WWW PPP F CC B-O-V-LL L =Laser WWW = Wavelength & Device Type 63A, 63C, 65K, 63H = 630nm 65A,P,Q,R,S,T,U,V = 650nm 66B, 66N = 660nm 67G, 67T = 670nm PPP = Fiber-Coupled Power 0.1 = 0.10 mw (100µW) 0.2 = 0.20 mw (200µW) 0.5 = 0.50 mw (500µW) 001 = 1.0 mw 1.6 = 1.6 mw 002 = 2.0 mw F = Fiber Type 1 = 9/125 SMF 2 = 50/125 MMF 3 = 62.5/125 MMF 4 = 100/140 MMF 9 = Customer Supplied LL = Length (in meters) 01 = 1m, 02 = 2m,.5 =.5m etc. V = Version 0 = Standard Unique codes for specific requirements O = Orientation 0 = N/A A = Bracket Shipped Loose B = Bracket Type A = None B = Panel Mount C = Board Mount G = Boad Mount (bracket shipped loose) CC = Connector Type ST = ST/PC SC = SC/PC SA = SC/APC FC = FC/PC FA = FC/APC FU = FC/UPC 00 = No Connector Data Legend: Receptacle Visible Laser Diodes Ex: L =Laser WWW = Wavelength & Device Type 63A, 63C, 65K, 63H = 630nm 65A,P,Q,R,S,T,U,V = 650nm 66B, 66N = 660nm 67G, 67T = 670nm PL WWW PPP RRR F-O-V PPP = Fiber-Coupled Power 0.1 = 0.10mW (100µW) 0.2 = 0.20mW (200µW) 0.5 = 0.50mW (500µW) 001 = 1.0mW 1.6 = 1.6mW 002 = 2.0mW V = Version 0 = Standard Unique codes for specific requirements O = Orientation 0 = N/A A = Bracket Shipped Loose F = Fiber Type 1 = 9/125 SMF 2 = 50/125 MMF 3 = 62.5/125 MMF 4 = 100/140 MMF 9 = Customer Supplied RRR = Receptacle Type FC1 = FC Panel Mount FC2 = FC Board Mount SC1 = SC Panel Mount only SC2 = SC Panel/Board Mount ST7 = ST low profile ST8 = ST high profile
9mm Diameter Laser Mounted in High Profile ST8 Receptacle 5.6mm Diameter Laser Mounted in Low Profile ST7 Receptacle
5.6mm Diameter Laser In FC Panel Mount Receptacle Z Style Orientation T Style Orientation 5.6mm Diameter Laser in FC Board Mount Receptacle
5.6mm Laser Mounted in SC2 Panel/Board Mount Receptacle Universal Receptacle for 2.5mm Ferrule
5.6mm (top) & 9.0mm (bottom) Fiber Pigtailed Laser Diodes
Board Mounting Bracket D for 5.6mm Pigtailed Lasers Panel Mounting Bracket E for 5.6mm Pigtailed Lasers Panel Mount Bracket B for 9.0mm Pigtailed Lasers 9.4mm