Information on the New T60C Sliding Table Saw Page 1
Basic features of the T60C : Sliding table length: 3.00 meters (other lengths are available as an option) Same hardened steel guide system like on all other MARTIN saws replaceable table lip approx. 10 cm aluminium profile with upright struts Page 2
Basic features of the T60C : Rip fence: 1.350 mm rip capacity (850 mm available as an option) Stainless steel side table Digital display in the control panel Motorised adjustment of rip fence Clamping of rip fence from the operating position as well as from the front of the machine Rip fence rides on four ball bearings (no round bars!) Rip fence can be removed and can be stored on a shelf, located on the front of the machine Page 3
Rip fence T60C Page 4
Basic features of the T60C : Cutting height and cutting angle: 130 mm at 90 92 mm at 45 Motorised adjustment of the cutting height indicated in the display Motorised adjustment of the cutting angle indicated in the display Tilting range 0 to 46 Page 5
Basic features of the T60C : Machine frame: Steel frame with concrete weights (see T60A frame) Weight approx. 1500 kg Machine table: Cast iron (dimensions: 850 mm x 1100 mm) Page 6
Basic features of the T60C : Operation: Tiltable control panel at eye level, slightly inclined towards the rear 3.5 TFT colour control with separate keypad at eye level Verstellung der Schnittbreite elektromotorisch Storage for 50 saw blades and scoring saw positions Angle calculation at the cross-cut fence Calculation of the saw blade tilting angle Calculation of compound angles Calculation of the workpiece thickness at the rip fence and the cross-cut fence Cutting programmes for grooves and rebates Cutting lists can be stored Page 7
Overview of the T60C control unit HOME screen Page 8
Overview of the T60C control unit Saw blade list Saw blade positions with scoring saw Page 9
Overview of the T60C control unit Length compensation at any angle and any position Length compensation at any angle and any position Page 10
Basic features of the T60C : Cross-cut fence and cross-cut table: With two stop elements with individual adjustment Both stop elements with fine adjustment Can be extended up to 3220 mm Steel cross-cut table - the cross-cut fence can be mounted at the front and the rear position of the table Angles can be set from 0-47 ± Integrated fix angle positions at 0 ; 22,5, 30 and 45 Digital length compensation at the cross-cut fence at any given angle, via controller Page 11
Cross-cut fence and cross-cut table Page 12
Cross-cut fence and cross-cut table Page 13
Basic features of the T60C : Optional scoring saw: Pneumatic lifting and lowering within a split second Motorised positioning left/right and lifting/lowering via controller while in operation 50 storage spaces for 50 individual scoring positions matching the main saw ProLock quick change system for easy removal within seconds Positioning of the scoring saw matching the main saw via control with storage function Page 14
Optional scoring saw ProLock quick change Page 15