PHOTOCOUPLER PS280-1,PS280-4 HIGH ISOLATION VOLTAGE SSOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS280-1 and PS280-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications to realize an excellent cost performance. This package has shield effect to cut off ambient light. FEATURES High isolation voltage (BV = 2 500 Vr.m.s.) Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm) Ordering number of tape product: PS280-1-F3, F4, PS280-4-F3, F4 Pb-Free product Safety standards UL approved: File No. E72422 DIN EN60747-5-2 (VDE0884 Part2) approved (Option) APPLICATIONS Programmable logic controllers Measuring instruments Power supply Hybrid IC PIN CONNECTION (Top View) 4 3 1 2 PS280-1 1. Anode 2. Cathode 3. Emitter 4. Collector PS280-4 1615 1413 1211 9 1 2 3 4 5 6 7 8 1. 3. 5. 7. Anode 2. 4. 6. 8. Cathode 9. 11. 13. 15. Emitter. 12. 14. 16. Collector Document No. PN398EJ02V0DS (2nd edition) Date Published December 2004 CP(K) The mark shows major revised points.
PS280-1,PS280-4 PACKAGE DIMENSIONS (UNIT: mm) PS280-1 PS280-4 2.7±0.3.3±0.3 4 3 16 9 1 2 1 8 2.0±0.1 1.27 0.4±0.1 0.12 M 0.1±0.1 0.15 +0. 0.05 0.5±0.3 7.0±0.3 4.4 2.0 +0.3 0.2 0.1±0.1 0.40 +0. 0.05 0.12 M 1.27 0.15 +0. 0.05 0.5±0.3 7.0±0.3 4.4 MARKING EXAMPLE PS280-1 PS280-4 *1 3 01 Week Assembled Year Assembled (Last 1 Digit) Assembly Lot Last number of type No. : *1 For external plating Pb-Free products, perform marking to indicate that these are lead-free products. No. 1 pin Mark PS280-4 N N 3 01 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code *1 For the external plating Pb-Free product, L is indicated at the second digit of the rank. Country Assembled Assembly Lot *1 2 Data Sheet PN398EJ02V0DS
PS280-1,PS280-4 ORDERING INFORMATION Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number *1 PS280-1 PS280-1 Solder contains 50 pcs (Tape 50 pcs cut) Standard products PS280-1 PS280-1-F3 PS280-1-F3 lead Embossed Tape 3 500 pcs/reel (UL approved) PS280-1-F4 PS280-1-F4 PS280-4 PS280-4 Magazine Case 45 pcs PS280-4 PS280-4-F3 PS280-4-F3 Embossed Tape 2 500 pcs/reel PS280-4-F4 PS280-4-F4 PS280-1-V PS280-1-V 50 pcs (Tape 50 pcs cut) DIN EN60747-5-2 PS280-1 PS280-1-V-F3 PS280-1-V-F3 Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS280-1-V-F4 PS280-1-V-F4 Approved (Option) PS280-4-V PS280-4-V Magazine Case 45 pcs PS280-4 PS280-4-V-F3 PS280-4-V-F3 Embossed Tape 2 500 pcs/reel PS280-4-V-F4 PS280-4-V-F4 PS280-1 PS280-1-A Pb-Free 50 pcs (Tape 50 pcs cut) Standard products PS280-1 PS280-1-F3 PS280-1-F3-A Embossed Tape 3 500 pcs/reel (UL approved) PS280-1-F4 PS280-1-F4-A PS280-4 PS280-4-A Magazine Case 45 pcs PS280-4 PS280-4-F3 PS280-4-F3-A Embossed Tape 2 500 pcs/reel PS280-4-F4 PS280-4-F4-A PS280-1-V PS280-1-V-A 50 pcs (Tape 50 pcs cut) DIN EN60747-5-2 PS280-1 PS280-1-V-F3 PS280-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS280-1-V-F4 PS280-1-V-F4-A Approved (Option) PS280-4-V PS280-4-V-A Magazine Case 45 pcs PS280-4 PS280-4-V-F3 PS280-4-V-F3-A Embossed Tape 2 500 pcs/reel PS280-4-V-F4 PS280-4-V-F4-A *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN398EJ02V0DS 3
PS280-1,PS280-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Symbol Ratings Unit PS280-1 PS280-4 Diode Forward Current (DC) IF 30 ma Reverse Voltage VR 6 V Power Dissipation Derating PD/ C 0.6 0.8 mw/ C Power Dissipation PD 60 80 mw/ch Peak Forward Current *1 IFP 0.5 A Transistor Collector to Emitter Voltage VCEO 70 V Emitter to Collector Voltage VECO 5 V Collector Current IC 30 ma/ch Power Dissipation Derating PC/ C 1.2 mw/ C Power Dissipation PC 120 mw/ch Isolation Voltage *2 BV 2 500 Vr.m.s. Operating Ambient Temperature TA 55 to +0 C Storage Temperature Tstg 55 to +150 C *1 PW = 0 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output 4 Data Sheet PN398EJ02V0DS
PS280-1,PS280-4 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF IF = 5 ma 1.2 1.4 V Reverse Current IR VR = 5 V 5 µa Transistor Coupled Terminal Capacitance Ct V = 0 V, f = 1.0 MHz pf Collector to Emitter Dark Current ICEO VCE = 70 V, IF = 0 ma 0 na Current Transfer Ratio (IC/IF) *1 CTR IF = 5 ma, VCE = 5 V 50 400 % Collector Saturation Voltage VCE (sat) IF = ma, IC = 2 ma 0.13 0.3 V Isolation Resistance RI-O VI-O = 1.0 kvdc 11 Ω Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz 0.4 pf Rise Time *2 tr VCC = 5 V, IC = 2 ma, RL = 0 Ω 5 µs Fall Time *2 tf 7 *1 CTR rank PS280-1 N : 50 to 400 (%) P : 150 to 300 (%) L : 0 to 300 (%) PS280-4 N : 50 to 400 (%) *2 Test circuit for switching time Pulse Input VCC PW = 0 µ s Duty Cycle = 1/ IF 50 Ω VOUT RL = 0 Ω Data Sheet PN398EJ02V0DS 5
PS280-1,PS280-4 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) Diode Power Dissipation PD (mw) 0 80 60 40 20 DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE PS280-1 160 PS280-4 PS280-1 PS280-4 120 0.8 mw/ C 1.2 mw/ C 0.6 mw/ C 0 0 0 25 50 75 0 125 0 25 50 75 0 125 Transistor Power Dissipation PC (mw) 200 80 40 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Ambient Temperature TA ( C) Ambient Temperature TA ( C) Forward Current IF (ma) 0 50 5 1 0.5 0.1 0.05 0.7 0.8 FORWARD CURRENT vs. FORWARD VOLTAGE TA = +0 C +60 C +25 C 0.9 1.0 1.1 1.2 1.3 0 C 25 C 55 C 1.4 1.5 Collector Current IC (ma) 30 25 20 15 5 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE IF = ma 5 ma 2 ma 1 ma 0 0 2 4 6 8 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) Collector to Emitter Dark Current ICEO (na) 000 1 000 COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE 0 VCE = 70 V VCE = 24 V 1 0 25 50 75 0 Collector Current IC (ma) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 1 IF = ma 5 ma 2 ma 1 ma 0.1 0 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA ( C) Remark The graphs indicate nominal characteristics. Collector Saturation Voltage VCE(sat) (V) 6 Data Sheet PN398EJ02V0DS
PS280-1,PS280-4 Normalized Current Transfer Ratio CTR 1.4 1.2 1.0 0.8 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 0.6 Normalized to 1.0 0.4 at TA = 25 C, IF = 5 ma, VCE = 5 V 0.2 CTR : 90% CTR : 390% 0 75 50 25 0 25 50 75 0 Ambient Temperature TA ( C) Current Transfer Ratio CTR (%) 400 300 200 0 CURRENT TRANSFER RATIO vs. FORWARD CURRENT VCE = 5 V, n = 3 Sample A B C 0 0.01 0.1 1 0 Forward Current IF (ma) SWITCHING TIME vs. LOAD RESISTANCE SWITCHING TIME vs. LOAD RESISTANCE 0 IC = 2 ma, VCC = 5 V, CTR = 236% 1 000 IF = 5 ma, VCC = 5 V, CTR = 236% Switching Time t ( µ s) 1 tf tr td ts Switching Time t ( µ s) 0 tf ts tr 0.1 0 1 000 000 Load Resistance RL (Ω) 1 1 0 td Load Resistance RL (kω) 5 FREQUENCY RESPONSE 1.2 LONG TERM CTR DEGRADATION 0 1.0 IF = 5 ma (TYP.) Normalized Gain Gv 5 0 Ω 300 Ω 15 RL = 1 kω 20 IF = 5 ma, VCE = 5 V 25 0.1 1 0 1 000 CTR (Relative Value) 0.8 0.6 0.4 0.2 0 TA = 25 C TA = 60 C 2 3 4 5 Frequency f (khz) Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet PN398EJ02V0DS 7
PS280-1,PS280-4 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 φ1.5 +0.1 0 1.75±0.1 7.5±0.1 16.0±0.3 7.55±0.1 2.8 MAX. 1.55±0.1 4.0±0.1 0.3 2.85±0.1 2.3±0.1 Tape Direction PS280-1-F3 PS280-1-F4 Outline and Dimensions (Reel) 2.0±0.5 R 1.0 2.0±0.5 φ13.0±0.2 φ21.0±0.8 φ330±2.0 φ0±1.0 17.5±1.0 21.5±1.0 Packing: 3 500 pcs/reel 15.9 to 19.4 Outer edge of flange 8 Data Sheet PN398EJ02V0DS
PS280-1,PS280-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 φ1.5 +0.1 0 1.75±0.1 2.8 MAX. 7.5±0.1 16.0±0.3.7±0.1 1.55±0.1 12.0±0.1 8.3±0.1 0.3 2.3±0.1 Tape Direction PS280-4-F3 PS280-4-F4 Outline and Dimensions (Reel) 2.0±0.5 R 1.0 2.0±0.5 φ13.0±0.2 φ21.0±0.8 φ330±2.0 φ0±1.0 17.5±1.0 21.5±1.0 Packing: 2 500 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN398EJ02V0DS 9
PS280-1,PS280-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering Peak reflow temperature Time of peak reflow temperature Time of temperature higher than 220 C Time to preheat temperature from 120 to 180 C Number of reflows Flux 260 C or below (package surface temperature) seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T ( C) 120 C 120±30 s (preheating) 180 C (heating) to s to 60 s 260 C MAX. 220 C Time (s) (2) Wave soldering Temperature Time Preheating conditions Number of times Flux 260 C or below (molten solder temperature) seconds or less 120 C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron Peak Temperature (lead part temperature) Time (each pins) Flux 350 C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 0 C Data Sheet PN398EJ02V0DS
PS280-1,PS280-4 (4) Cautions Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN398EJ02V0DS 11
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix A indicates that the device is Pb-free. The AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Concentration Limit per RoHS (values are not yet fixed) < 00 PPM Concentration contained in CEL devices -A -AZ Not Detected (*) Mercury < 00 PPM Not Detected Cadmium < 0 PPM Not Detected Hexavalent Chromium < 00 PPM Not Detected PBB < 00 PPM Not Detected PBDE < 00 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.