Threaded Products Gaskets & Seals Precision Machining
FIRST CALL, ONLY CALL Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group is a manufacturer and distributor of threaded products, gaskets & seals, and precision machined components. Dan-Loc Group manufactures and distributes products that serve the global oil & gas industry as well as the petrochemical, industrial, marine, power generation, agriculture and transportation industries. Dan-Loc Group has facilities in the USA, UK, Singapore and Malaysia to serve our customers. Dan-Loc Group has 189 years of combined manufacturing experience with each company recognized as a premier supplier of the highest quality industrial threaded products. Today, Dan-Loc Group produces thousands of standard and special tap end studs, double end studs, continuous thread studs and nuts. Dan-Loc Group also manufactures and supplies a full line of API and ASME ring joint gaskets. A large volume of common sizes and materials is in stock as well as raw material grades to produce non-standard gaskets. Products include standard and specialty ring joint gaskets, spiral wound gaskets, non-metallic gaskets and specialty seals. With an extensive inventory of raw materials and full-line machine shop capabilities, Dan-Loc Group is fully capable and ready to produce any standard or special product requirements. We are equipped for heat treating to ASTM requirements and can provide a variety of platings and coatings to meet industry standard or customer design specifications. Dan-Loc Group has the manufacturing capacity, facilities, quality control, personnel, and experience to meet the needs of our customers and the industries they serve. Dan-Loc Group can meet our customers needs for high quantity, long-run jobs as well as small lot, expedited, or rush orders. All Dan-Loc Group companies are ISO 9001:2008 Registered. Global supply chain Single source for stud bolts & ring gaskets Domestic manufacturing & world class sourcing Complete traceability Friendly 40-lb packaging Listed on most end-user AMLs ISO 9001:2008 Registered API Spec Q1 Certified API 6A and 20E Monograms Six Sigma Green Belt Team In-house heat treatment In-house testing capabilities Convenient express locations In-depth industry knowledge
DAN-LOC EXPRESS FILLS YOUR ORDERS FOR HARD-TO-FIND SPECIALS AND STANDARDS. FAST. If you need stud bolts quickly, you should know about Dan-Loc Express. At our locations across the USA and the UK we re ready to fulfill your bolt orders quickly, so you can get what you want when you need it. At each location, we have a full range of widely used fasteners ready for immediate shipment. We can also provide studs made from exotic alloys plus other unique products. We offer fast turnaround on special orders, including special length studs and custom configurations. Our dedicated staff of fastener experts will make sure your needs are quickly met from our wide selection of material options including: B7, B7M, L7, L7M, B16, B8, B8M and exotic alloys. We also offer a variety of platings including zinc and cadmium, as well as PTFE and Cermet coatings. Call the Dan-Loc Express nearest you for quick availability of a wide range of bolts and gaskets.
THREADED PRODUCTS GASKETS & SEALS Dan-Loc Group is an ISO 9001:2008 Registered manufacturer of all thread studs, tap end studs, and custom fasteners. Dan-Loc Group s capabilities include cut threading, roll threading, and the use of bar feed lathes that can produce special reliefs, profiles and single point threads on parts up to six inches in diameter. Dan-Loc Group is licensed to use the API Spec 20E Monogram BSL-1, BSL-2 and BSL-3 (License No. 20E-0022) for all sizes of roll threaded studs and all sizes of fully machined bolts, screws and nuts. Dan-Loc Group is a leading provider of API ring gaskets, spiral wound gaskets, non-metallic gaskets and precision machined gaskets. Dan-Loc Group has large inventories of standard gaskets on the shelf. Same day shipment available. Dan-Loc Group is licensed to use the API Spec 6A Monogram (License No. 6A-1867) on all sizes and materials of manufactured ring joint gaskets Studs Tap end Studs Double end Studs Combination Studs Single end Studs All Thread Studs Anchor Bolts / Bonnet Bolts Collars / Specials Nuts Hex Nuts / Square Nuts Slotted Nuts Coupling Nuts / Jam Nuts Cap Nuts / Specials Spherical Nuts High Profile or Tall Nuts Headed Parts Hex Head Socket Head Cap Screws 12-Point Cap Screws Set Screws / Specials Materials Stocked bar in B7, L7, B16, and all stainless grades, 17-4, A286, and exotics such as inconel, monel, and hastelloy to make any type of special threaded products Finishing Coatings We are capable of supplying many types of coatings per your specifications on a quick turn-around basis. Some of the coatings available are: cadmium / yellow chromate inorganic zinc / various types of PTFE and Cermet coatings Heat Treating We have our own in-house furnaces for heat treating and modifying bolting components to ASTM specifications. Testing On-site mechanical testing laboratory for ASTM standards compliance documented via in-house generated MTRs Yield, Tensile, Hardness, Charpy, Proof Load, and CMM PMI testing Ring Joint Gaskets Huge inventory of standard API sizes R, RX, and BX gaskets Soft Iron, Steel, F5, 304, and 316 materials Spiral Wound Gaskets Specialty Gaskets With and without stainless steel inner rings Fast service on custom sizes Machine shop dedicated to manufacturing special gaskets Made to customer prints All materials including inconel, titanium, and other exotics
PRECISION MACHINING Dan-Loc Group specializes in the machining of complex parts for the global oil & gas industry. Dan-Loc Group s machinists are highly experienced in machining a variety of materials with an emphasis on Inconel, Monel, Super Duplex, Heat & Creep resistant steels and other exotic materials as well as the more basic Low Alloy Steels and Corrosion Resistant Alloys. Parts can be produced from various sections such as flat bar, square bar, angled bar, hexagon bar and round bar up to 24.5 inches (620 mm) diameter in varying lengths. Turned Parts Dan-Loc Group operates over 30 CNC lathes, many with live tooling to produce parts with close tolerances and can accommodate up to 24.5 inches (620 mm) in diameter and 80 inches (2030 mm) in length. Dan-Loc Group's machinists are experienced in manufacturing specialty and complex parts for the energy industry. Dan-Loc Group also has an in-house quality assurance lab with CNC Coordinate Measuring Machines to verify profiles and dimensions. Milled Parts Dan-Loc Group has 4-axis milling capability and the expertise to produce specialty machined components. Our staff has the experience and capabilities to perform complex profile milling on difficult to machine materials ranging from high carbon steel to all grades of stainless steel and exotics. EDM (Wire and Spark Erosion) Electrical Discharge Machining (AKA wire & spark erosion and wire & die sink) is used to produce complex, very tight tolerance shapes and features which are difficult to produce using conventional machining techniques. Dan-Loc Group has access to over 30 CNC EDM machine tools globally.
725 North Drennan / Houston, Texas 77003 phone: 713.356.3500 / fax: 713.356.3501 toll free: 888.396.2658 / www.danlocgroup.com Dan-Loc Group - Singapore JTC Summit 8 Jurong Town Hall Road, #24-05 Singapore 609434 office: +65 6818 0987 fax: +65 6818 0801 Dan-Loc Group - Malaysia Suite 8-1 & 8-2, Level 8 Menara CIMB No. 1, Jalan Stesen Sentral 2 Kuala Lumpur Sentral 50470 Kuala Lumpur office: +603 2298 8496 fax: +603 2298 8201 Dan-Loc Express - Ohio 294 Fox Drive Piqua, Ohio 45356 phone: 937.778.0485 Dan-Loc Express - Louisiana 2808 South Ruby Ave. Gonzales, Louisiana 70737 phone: 225.644.6449 Kitson Road, Leeds West Yorkshire, LS10 1NR United Kingdom office: +44 (0)113 245 0726 fax: +44 (0)113 242 0047 QUALITY ASSURANCE Dan-Loc Group has established strict processes of quality assurance and quality control which are certified ISO 9001:2008. Our quality management system manual is available upon request. We are also in compliance with the U.S. Fastener Quality Act. Dan-Loc Group has a full range of in-house testing equipment to cover your measuring, gauging, destructive and non-destructive testing requirements and assure high quality products. Mill Test Reports and Certifications are available with each order, upon request. Dan-Loc Group is an API Spec Q1 Certified manufacturer and licensed to use the API Spec 20E Monogram (20E-0022) and Spec 6A Monogram (6A-1867). Dan-Loc Group is a global leader in the manufacturing and distribution of standard and specialty fasteners (all thread studs, tap end studs, double end studs, Dan-Loc studs and custom bolts), standard and specialty gaskets (API ring gaskets, proprietary subsea and surface wellhead gaskets, spiral wound gaskets and non-metallic gaskets), and precision machined components. We are in business to take care of our customers! We will remain a customer-focused company by centering our culture, decisions, and innovation on their needs. www.danlocgroup.com Rev17018