FCDB (Fibre-Channel Data Bus) & Ruggedized High Speed Solutions
Souriau Solutions Souriau offers a complete ruggedized cabling solutions for pointto point, featuring Fibre-Channel technology with the FCDB line of products, and flexible high speed coax cable harness.
Souriau Solutions Souriau s complete product solutions include: - FCDB cable harness, utilizing MIL-DTL-38999 series III, composite, size 11 connector. - FCDB PCB mount interconnect system with straight and 90º configurations. - FCDB accessory contact system. - High speed flexible coax cable harness, utilizing precision RF interconnections. - Additional accessories include RF, adapters, etc These high performance systems are the practical solution for high speed, ruggedized copper technology requirements.
Souriau FCDB Solutions Meets the enhancements to the performance specifications of the Fibre Channel ANSI X3.230 FC-PH and ANSI X3.297 FC-PH-2 specification
Fibre-Channel Technology What is Fibre-Channel? Fibre-Channel is a quad copper wire cable construction consisting of two differential (balanced) pairs with two overall braided shields. Each quad carries two differential signals at transfer rates up to 2 Gbit/sec.
Fibre-Channel Cable Construction Available in 22 & 26 awg (CBL-QCABLE22 & CBL-QCABLE26)
FCDB Ruggedized High Speed Cable Harness Solutions
FCDB Ruggedized High Speed Cable Harness Solutions
Design Characteristics Fibre-Channel Technology (22 & 26 AWG) Up to ~23 ft. with 26 AWG and ~63 ft. with 22 AWG without degradation MIL-DTL-38999 S3 composite, size 11 (4) #22D standard crimp contacts Straight & 90 backshell EMI/RFI shielded Environmentally sealed Light weight High vibration Keying N, A, B, C, D, E Variations of connector termination available (HSSDC & D-SUB)
Electrical Characteristics Transfer rate: Impedance: Crosstalk: Attenuation: Delay: Capacitance: Shielding: 2 Gbit/sec (differential signal) 150 ± 10 ohm (@ Cable) (± 30 ohm within 800 ps @ connector) -35dB @ 1 GHz 26 AWG, 6 22 db/100 ft (100 1000 Mhz) 22 AWG, 4 16 db/100 ft (100 1000 Mhz) 1.35 ns/ft (delay through cable) 200 ps/30 m (delay skew of pair) 10 pf/ft (max between pair) 20 pf/ft (max between conductor to shield) 360º, 60 db @ 50 MHz to 4 GHz
Mechanical Characteristics Max diameter: 26 AWG ~0.22 (5.6 mm) 22 AWG ~0.33 (8.4 mm) Conductor: 26 AWG 19/38 stranding 22 AWG 19/34 stranding copper/silver plated Weight: 26 AWG 40 lbs/1000 ft max 22 AWG 65 lbs/1000 ft max Jacket mat l: PFA/FEP, black (MIL-C-17) 0.012 thick min (0.30 mm) Shielding: braided 38 AWG, 95% coverage copper/silver plated Dielectric mat l: PTFE (MIL-C-17) Bend radius: 10X diameter min.
FCDB Cable Harness 38999 S2 Size 11 Configuration Size 11 layout Straight Backshell 90 Backshell
Digital Test Equipment Tektronix 11801C Digital Oscilloscope TDR sampling Impedance Insertion Loss Return Loss Hewlett Packard 8722D Network Analyzer VSWR Velocity Propagation Eye pattern
FCDB Cable Harness TDR Data FCI Cable End 1 P1&3 Ohm Impedance (Ohm) 200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 3.90E-08 4.90E-08 5.90E-08 6.90E-08 7.90E-08 8.90E-08 9.90E-08 1.09E-07 Time (sec) Pin 1 Pin 3 1&3 Filtered
Cable Harness Production TDR Data Rt. Angle CBL-97404-3A Pair: A-C End: P498 Lot/Serial: 200303-1181281-001
Cable Harness Production TDR Data Rt. Angle CBL-97404-3A Pair: B-D End: P498 Lot/Serial: 200303-1181281-001
Cable Harness Production TDR Data Straight CBL-97404-3A Pair: A-C End: P544 Lot/Serial: 200303-1181281-001
Cable Harness Production TDR Data Straight CBL-97404-3A Pair: B-D End: P544 Lot/Serial: 200303-1181281-001
Eye Pattern Data Input Signal @ 1.0 Gbps Typical Input Signal 1 Gbps
Cable Harness Eye Pattern Data @ 1.0 Gbps Output Signal 1 Gbps, 6 ft length, Unequalized 22 AWG cable Pair AC Output Signal 1 Gbps, 6 ft length, Unequalized 22 AWG cable Pair BD
Eye Pattern Data Input Signal @ 2.2 Gbps Typical Input Signal 2.2 Gbps
Cable Harness Eye Pattern Data @ 2.2 Gbps Output Signal 2.2 Gbps, 6 ft length, Unequalized 22 AWG cable Pair AC Output Signal 2.2 Gbps, 6 ft length, Unequalized 22 AWG cable Pair BD
FCDB Ruggedized High Speed 150 PCB Solution
Design Objectives true fibre-channel solution for panel to board application (150 ohms) Robust aluminum construction Light weight & low profile Meets MIL-DTL-38999 specifications Mechanical Environmental Size 22 contacts Polarized housing Accommodates 26 & 22 awg fibre-channel cables
Design Configurations PCB Connector Right Angle Connector Straight Connector
Right Angle PCB Mount System
Straight PCB Mount System
Overall Dimensions Right Angle System
Overall Dimensions Straight System
PCB Mount TDR Test Data Straight Clipless Rise Time = 195ps 163.6 /144.2 Right Angle Clipless Rise Time = 215ps 164.6 /144.4 164.6 Ohms Max = 180 Ohms 144.2 Ohms Min = 120 Ohms Standard Quad Connection
FCDB Ruggedized High Speed 150 Accessory Contact Solution
Design Objectives 150 ohms solution Exceeding performance of current FCDB cable solution Proprietary solution Removable contact design Facilitates installation & field serviceability Configurable to different interconnection systems (38999, 26482, ARINC, etc ) Rugedized & compact Meets MIL-DTL-38999 specifications Mechanical Environmental Size 22 contacts Accommodates 26 & 22 awg fibre-channel cables
Accessory contact Cross-sections #22D Pin Contact Crimped #22D Socket Contact Crimped
Accessory contact Overall Dimensions Socket Accessory Contact Pin Accessory Contact
Pin Contact w/ 38999 Plug Exploded view Retention Ring Pin Outer Contact Interfacial Seal #22D Crimp Pin Contact Crimp Ferule Front Insulator Rear Insulator
Socket Contact w/ 38999 Receptacle Exploded view Retention Ring Peripheral Seal Pin Outer Contact #22D 38999 S2 Crimp Socket Contact Crimp Ferule Front Insulator Rear Insulator
Accessory Contact & 38999 S3 Assembly Cross-section Environmental seals 38999 peripheral seal is retained interfacial seal on accessory contact Metal adapter/retaining ring adapts 38999 size 11 shell to accept accessory contact provides grounding to shell allows for insert & extraction of accessory contact