Maximum number of stations: 1 main-station and up to 98 sub-stations Maximum number of zones: 1 Directions: One way and bi-directional with diverters Diverters: 2-way, 3-way, 4-way Mode of operation: Reversing system for the transportation between 1 main-station and up to 98 sub-stations. The main-station can communicate with each sub-station and each sub-station can communicate with the main-station. The sub-stations cannot correspond with each other. It is especially designed for CashHandling-applications. Main station Use as: Tube diameter Sub station OD 63 OD 90 OD 110 OD 160 EWS Station Types Slide Station OEopen-end-station System example: by. 2008 Technical alterations reserved. K:Dokumentationen_PDF/English/AC 660/s Bi-Directional: This Pneumatic Tube System shows an EWS-station as a main station and slide stations as sub stations. At the EWS, independent from the status of operation, at each time a carrier can be stored. One direction: Sending stations can be connected in sequence and are easy to install with Y-tubes. 41 050 020e V1.0 AC 660 Systemdescription Page 1/5
Operation panel AC 6600 at the Main-Station for programming and reporting Operation Panel for Sub-Stations Illuminated graphic display, Keypad for entering the amount, identification code or carrier number. 3-way diverter AC 6600 with controller board Features Fully automatic and programmable microprocessor controlled system. Does not require a dedicated PC. Central control unit (CCU) in rugged metal cabinet equipped with keypad and large graphic display for easy reading and programming. System can be composed of any combination of valves (slidegates), diverters (2,3 and 4 way), EWS stations, rotary valves, conveyers (lift stations), lockable doors/slidestations/safes. Up to 250 devices maximum, allowing almost infinite system configurations! One direction or bi-directional system, with or without a bypass. Soft landings (pneumatic deceleration of carriers). Up to 99 stations. Transits can be requested by send switch, carrier sensor or keypad. Optional station operation panels provide clear feedback and allow recording of transaction details such as user, cash value, register number, receipt number, etc. RFID option also available. Manual or automatic purging on failed transits. Simple and self-intuitive menu system at the CCU for both system operation and programming. At the CCU (Cash office) there are different password levels for operators/ administrators/ managers User list provides identification and access control facilities suitable for tracking cash and other valuables. Up to 99 section sensors for positive carrier location. Up to 99 printers, fully configurable for accounting, user transactions, error reporting, etc. System data, topography and actual data are stored, also in case of power failure Extensive error detection and self-healing facilities. Storage of last 5000 operations in system log which can be accessed and printed via intelligent log searching functions: by type, user, time and date, station, session reports, etc. CCU operators can disable stations and printers for security or other isolation requirements. Flexible turbine direction control by rotary valve, diverter, slidegate, VFD, etc. Feature rich audit system allows detailed investigations of cash movements. Numerous customisable counters and displays: carriers received, total cash, session details, status, etc. Transfer of multiple carriers in a single transit for high volume stations. Cashier identification with Pin-Code Option: RFID reader equipped at the main station/treasury or cashier identification Safe facilities for one or multiple safes with after-hours diversion options. Special features for external (third party) safe emptyers / money collecters. Connectivity to PC (serial) or internet (Ethernet) for remote monitoring and control and program updates. Comprehensive system diagnostics from the CCU allows remote testing of stations, device, printers, etc. 41 050 020e V1.0 AC 660 Systemdescription Page 2/5
Simple one-way-configuration: Each station can be triggered by a carrier sensor or send-switch with a retaining latch for security Simple one-way-configuration: Each station has a operation panel for send identification / security functions Simple one-way-configuration with additional return line: Each station has a operation panel Return-Receiving station can be a lockable receiving cabinet 41 050 020e V1.0 AC 660 Systemdescription Page 3/5
Simple 2-way point-to-point configuration: Open end station and slide station for sending and receiving Each station can be triggered by sending switch or carrier sensor Sending and receiving slide station Each station can be triggered by sending switch or carrier sensor Receiving station is lockable for of security Cash-office sending station is for returning empty carrier and change to any station Receiving station is lockable because of security Separate sending and receiving station in the cash-office Cash-office sending station is returning empty carrier and change to any station 41 050 020e V1.0 AC 660 Systemdescription Page 4/5
Each station has a operation panel for security access Receiving station is lockable because of security Separate sending and receiving station in the cash-office Cash-office sending station is returning empty carrier and change to any station 41 050 020e V1.0 AC 660 Systemdescription Page 5/5