PIVOT BUFFET HRDWRE 8 - cams 8 - cam screws 44 - bolts 44 - flat washers 44 - spring washers 8 - screws 16 - shelf pins Thank you for purchasing the Pivot Buffet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. s you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED phillips head screwdriver COMPONENTS 1 - top 4 - adjustable shelves 1 - bottom 2 - fixed shelves 2 - side s (1 left, 1 right) 2 - middle partitions (1 left, 1 right) 1-1 - back 2 - wine rack s 1 - drawer 1 - drawer bottom 2 - drawer sides 1 - drawer back 4 - feet Made in Vietnam - r07 Customer Service 800.967.6696 www.crateandbarrel.com Page 1 of 5
PIVOT BUFFET fixed shelf NOTE: Make sure arrows on each cam point towards nearest edge with holes left partition NOTE: Make sure BOTTOM labeled on each fixed shelf is facing towards the bottom fixed shelf BOTTOM BOTTOM B partition NOTE: Make sure arrows labeled UP on left/right partition are pointing towards the top of assembly right partition 1 ) Insert 4 cams into 2 fixed shelves as shown. Make sure arrows on each cam point towards nearest edge with holes. B) Insert 4 cam screws into 2 middle partitions. Secure cam screws with a phillips head screwdriver. 2 Fit pre-assembled dowels of fixed shelves into corresponding holes of left/right partitions as shown. With a screwdriver, turn each cam clockwise until it securely engages each cam screw. left side NOTE: Make sure arrow labels on left/right sides points towards the top of assembly NOTE: Make sure arrow labeled UP on back is pointing towards the top of assembly right side back 3 Fit dowels of assembled unit into corresponding holes of back as shown. 4 ttach back of assembled unit to left/right side s with 6 bolts, 6 spring washers, and 6 flat washers. Secure bolts with a phillips head screwdriver. Made in Vietnam - r07 Customer Service 800.967.6696 www.crateandbarrel.com Page 2 of 5
PIVOT BUFFET support 5 Remove support from as shown. With a screwdriver, turn pre-attached screws counter-clockwise to detach and discard. 6 With the assistance of another adult, attach to assembled unit with 6 bolt, 6 spring washers, and 6 flat washers as shown. bottom assembly foot bottom NOTE: Make sure arrow labeled FRONT on underside of bottom assembly is pointing towards the 7 ttach 4 feet to bottom with 1 bolt, 1 spring washer, and 1 flat washer per foot as shown. 8 ttach assembled unit to bottom assembly with 9 bolts, 9 spring washers, and 9 flat washers as shown. Made in Vietnam - r07 Customer Service 800.967.6696 www.crateandbarrel.com Page 3 of 5
PIVOT BUFFET top 9 Secure bottom assembly to partitions of assembled unit with 4 bolts, 4 spring washers, and 4 flat washers as shown. 10 With the assistance of another adult, carefully position unit upright as shown. ttach top to assembled unit with 15 bolts, 15 spring washers, and 15 flat washers as shown. drawer back left drawer side right drawer side drawer bottom 11 ttach left and right drawer sides to drawer back with 4 screws as shown. Secure screws with a screwdriver. 12 Slide drawer bottom into grooves of drawer assmebly as shown. Made in Vietnam - r07 Customer Service 800.967.6696 www.crateandbarrel.com Page 4 of 5
PIVOT BUFFET drawer 13 Fit drawer to drawer assembly and secure with 4 screws as shown. 15 Fit drawer glides of drawer assembly into corresponding drawer glides of assembled unit as shown. wine rack B wine rack 16 Fit slot of wine rack into corresponding slot of remaining wine rack as shown. C 17 ) Insert 16 shelf pins at desired shelf heights as shown. B) Insert 4 adjustable shelves into assembled unit. Make sure each shelf is securely supported by shelf pins. C) Insert wine rack assembly into assembled unit as shown. ssembly is now complete. CLENING ND CRE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in Vietnam - r07 Customer Service 800.967.6696 www.crateandbarrel.com Page 5 of 5
PIVOT HUTCH HRDWRE Missing hardware? Please call 800.606.6387 for replacements. 32 - bolts 32 - spring washers 32 - flat washers 8 - shelf pins 2 - connecting brackets 4 - large screws 4 - medium screws 8 - small screws 2 - wall straps Thank you for purchasing the Pivot Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. s you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. 4 - plastic anchors TOOLS REQUIRED phillips head screwdriver 4 - wall brackets COMPONENTS 1 - top 1-1 - back 1 - bottom 2 - adjustable shelves 2 - side s (1 left, 1 right) 1 - partition Made in Vietnam - r03 Customer Service 800.967.6696 www.crateandbarrel.com Page 1 of 5
PIVOT HUTCH partition bottom NOTE: Make sure THIS SIDE UP labeled on bottom is facing toward the partition when assembling as shown back 1 ttach bottom and partition with 2 bolts, 2 spring washers, and 2 flat washers as shown. Secure bolts with a phillips head screwdriver. 2 Fit dowels of partition into corresponding holes of back as shown. left side right side 3 ttach left/right side s to assembled unit with 6 bolts, 6 spring washers, and 6 flat washers as shown. 4 Secure left/right side s to bottom of assembled unit with 4 bolts, 4 spring washers, and 4 flat washers as shown. Made in Vietnam - r03 Customer Service 800.967.6696 www.crateandbarrel.com Page 2 of 5
PIVOT HUTCH support 5 Remove support from as shown. With a screwdriver, turn pre-attached bolts counter-clockwise to detach. Set support and hardware aside and discard. 6 Fit dowels of assembled unit into corresponding holes of. Secure with 6 bolts, 6 spring washers, and 6 flat washers as shown. top NOTE: Make sure arrow labeled FRONT on underside of top is pointing towards the B adjustable shelves 7 With the assistance of another adult, position assembled unit upright as shown. ttach top to assembled unit with 14 bolts, 14 spring washers, and 14 flat washers as shown. 8 ) Insert 8 shelf pins as desired heights as shown. B) Place 2 adjustable shelves into assembled unit as shown. Make sure each shelf is securely supported by each shelf pin. Made in Vietnam - r03 Customer Service 800.967.6696 www.crateandbarrel.com Page 3 of 5
PIVOT HUTCH 7 With the assistance of another adult, carefully place hutch onto buffet as shown. ttach 2 connecting brackets to back of hutch and buffet (sold seperately) with 4 small screws per bracket as shown. Secure screws with a screwdriver. ssembly is now complete. hutch buffet (sold seperately) CLENING ND CRE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in Vietnam - r03 Customer Service 800.967.6696 www.crateandbarrel.com Page 4 of 5
PIVOT HUTCH Safety Mounting Instructions For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. ) ttach wall bracket to top of bookcase using 2 medium screws as shown. B) Determine the final location of bookcase. Mark position on the wall, approximately 2" below the wall bracket mounted to the back of the cabinet. C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall. D) ttach wall bracket to the wall by inserting 2 large screws, and into the plastic anchor in the wall. E) Place the unit so the wall brackets on the back edge are aligned with the wall brackets on the wall. F) Lace one end of the wall strap through both brackets, and into the other end of the strap. G) Pull the strap tightly until secure. H) Repeat steps -G for remaining wall brackets and wall straps. C wall bracket D plastic anchor large screw medium screw F wall strap wall bracket NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. Made in Vietnam - r03 Customer Service 800.967.6696 www.crateandbarrel.com Page 5 of 5