MRA43T3G Series, NRVA43T3G Series Surface Mount Standard Recovery Power Rectifier Power Surface Mount Package Features construction with glass passivation. Ideally suited for surface mounted automotive applications. Features Compact Package with J Bend Leads Ideal for Automated Handling Stable, High Temperature, Glass Passivated Junction NRVA Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC Q11 Qualified and PPAP Capable These Devices are Pb Free and are RoHS Compliant* Mechanical Characteristics Case: Molded Epoxy Epoxy meets UL 94 V @.12 in Weight: 7 mg (Approximately) Finish: All External Surfaces are Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 26 C Max. for 1 seconds in Solder Bath Polarity: Band in Plastic Body Indicates Cathode Lead Marking: MRA43T3G = R13 MRA44T3G = R14 MRA4T1G = R1 MRA4T3G = R1 MRA46T3G = R16 MRA47T3G = R17 NRVA44T3G = R14 NRVA4T3G = R1 NRVA46T3G = R16 NRVA47T3G = R17 ESD Rating: Human Body Model 3A Machine Model C STANDARD RECOVERY RECTIFIERS 1. AMPERES 3 1 VOLTS CASE 43D MARKING DIAGRAM R1x FAYWW R1x = Specific Device Code F = Wafer Source A = Assembly Location Y = Year WW = Work Week = Pb Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the ordering information section on page 4 of this data sheet. *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, 212 August, 212 Rev. 9 1 Publication Order Number: MRA43T3/D
MRA43T3G Series, NRVA43T3G Series MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol V RRM V RWM V R MRA43 MRA44/ NRVA44 Value MRA4/ NRVA4 MRA46/ NRVA46 MRA47/ NRVA47 Unit 3 4 6 8 1 Volts Avg. Rectified Forward Current (At Rated V R, T L = 1 C) Peak Repetitive Forward Current (At Rated V R, Square Wave, 2 khz, T L = 1 C) Non Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 6 Hz) I O 1 I FRM 2 I FSM 3 Amp Amps Amps Storage/Operating Case Temperature T stg, T C to 1 C Operating Junction Temperature T J to 17 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Thermal Resistance, Junction to Lead (Note 1) Thermal Resistance, Junction to Ambient (Note 2) Characteristic Symbol Value Unit R θjl 16.2 R θja 88.3 C/W ELECTRICAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage (Note 3) (I F = 1 A) (I F = 2 A) Symbol V F 1.1 1.18 Value T J = 2 C T J = 1 C 1.4 1.12 Unit Volts Maximum Instantaneous Reverse Current (at rated DC voltage) I R 1 A 1. Minimum Pad Size 2. 1 inch Pad Size 3. Pulse Test: Pulse Width 2 s, Duty Cycle 2%. IF, INSTANTANEOUS FORWARD CURRENT (AMPS 1 T J = 1 C 1. 4 C.1 1 C 2 C.1.4.6.8 1. 1.2 V F, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) IR, REVERSE CURRENT (AMPS) 1E 6 1E 6 1.E 6 1E 9 1E 9 1.E 9 T J = 1 C 1 C 2 C 1 1 2 2 3 V R, REVERSE VOLTAGE (VOLTS) 3 4 Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current 2
MRA43T3G Series, NRVA43T3G Series IO, AVERAGE FORWARD CURRENT (AMPS) 1.6 1.4 1.2 1..8.6.4.2 dc Square Wave I pk /I O = 1 2 Freq = 2 khz 2 4 6 8 1 12 T L, LEAD TEMPERATURE ( C) 14 16 PFO, AVERAGE POWER DISSIPATION (WATTS) 1.8 1.6 1.4 1.2 1..8.6.4.2 dc Square Wave I pk /I O = 1 2. 1. 1. I O, AVERAGE FORWARD CURRENT (AMPS) 2. Figure 3. Current Derating per Leg Figure 4. Forward Power Dissipation per Leg 1 C, CAPACITANCE (pf) 1 T J = 2 C 1 2 4 6 8 1 12 14 16 V R, REVERSE VOLTAGE (VOLTS) 18 2 Figure. Capacitance r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) 1..1.1.1 1E 6 1E 6 1E 3 R JL (Min Pad Board) 1E 3 t, TIME (s) R JL(t) = R JL * r(t) 1E 3 1E+ 1E+ 1E+ 1E+3 1E+3 Figure 6. Thermal Response R JA (1 inch Pad Board) 3
MRA43T3G Series, NRVA43T3G Series ORDERING INFORMATION MRA43T3G MRA44T3G MRA4T1G MRA4T3G MRA46T3G MRA47T3G NRVA44T3G* NRVA4T3G* NRVA46T3G* NRVA47T3G* Device Package Shipping (Pb Free), / Tape & Reel 1, / Tape & Reel, / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD811/D. *NRVA Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC Q11 Qualified and PPAP Capable. 4
MRA43T3G Series, NRVA43T3G Series PACKAGE DIMENSIONS CASE 43D 2 ISSUE G H E E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION b SHALL BE MEASURED WITHIN DIMENSION L. b D POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES) MILLIMETERS INCHES DIM MIN NOM MAX MIN NOM MAX A 1.97 2.1 2.2.78.83.87 A1..1.2.2.4.8 b 1.27 1.4 1.63..7.64 c.1.28.41.6.11.16 D 2.29 2.6 2.92.9.13.11 E 4.6 4.32 4.7.16.17.18 H E 4.83.21.9.19.2.22 L.76 1.14 1.2.3.4.6 A L c A1 SOLDERING FOOTPRINT* 4..17 2..787 2..787 SCALE 8:1 mm inches *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 163, Denver, Colorado 8217 USA Phone: 33 67 217 or 8 344 386 Toll Free USA/Canada Fax: 33 67 2176 or 8 344 3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 8 282 98 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 79 291 Japan Customer Focus Center Phone: 81 3 817 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MRA43T3/D