Akatherm PE drainage complies with EN1519 and has water mark certification for AS/NZS 4401 and AS/NZS A mm x 5m 3. A mm x 5m 3

Similar documents
ISO INTERNATIONAL STANDARD

REGISTRATION EXAMINATION, JUNE 2008 DRAINLAYING ANSWER SCHEDULE

Cast Copper Alloy Solder Joint Drainage Fittings: DWV

INTERNATIONAL STANDARD

Recommended Practice for Wet and Dry Thermal Insulation of Subsea Flowlines and Equipment API RECOMMENDED PRACTICE 17U FIRST EDITION, FEBRUARY 2015

PRACTICAL UNDERSTANDING AND INTERPRETATION OF TECHNICAL STANDARD TS30a WELDING SPECIFICATION

Shell-and-Tube Heat Exchangers API STANDARD 660 NINTH EDITION, MARCH 2015

SOCKET & NIPPLE. Quality products for a quality environment BSP THREADED FITTINGS - PP. Code K12. Socket - equal Injection moulded.

Australian/New Zealand Standard

Effective Date: August 2016 Void After: August Product: Sewer Pipe & Fittings (PVC) File No. 1367

Vinidexair THE BLUE AIR PRESSURE PIPING SYSTEM

ISO INTERNATIONAL STANDARD

30 Bending Brake. Model Assembly and Operating Instructions. Distributed exclusively by Harbor Freight Tools.

PRODUCT CATALOGUE. Major Features: Arc Bends Manufactured to: Pipestar now offering full-line of flanged Arcbends

Installation BT Coupler

ISO INTERNATIONAL STANDARD

DYNEX SOFFIT SYSTEM. Product. Scope. Building Regulations. Appraisal No. 908 [2016] Appraisal No. 908 (2016) BRANZ Appraisals

PROTECTO SILL WINDOW SEALING SYSTEM. Product. Scope. Appraisal No. 444 [2017]

SeTTINg a new standard

MaxLite LED Self-Driven LiteBars

(R) Aerospace First Article Inspection Requirement FOREWORD

Installation Guide. for Ampelite Industrial Sheeting STD. Premium Industrial Sheeting. Industrial Grade Fibreglass. Industrial Grade Fibreglass

TRADE SILL FLASHING TAPE. Product. Scope. Appraisal No. 712 [2012] Appraisal No. 712 (2012) Amended 19 July BRANZ Appraisals

9 QUICK RELEASE WOODWORKING VISE

ROOF FRAMING INFORMATION BATTEN INSTALLATION CORONA SHAKE INSTALLATION ACCESSORY INSTALLATION ESTIMATING DATA GENERAL INFORMATION

THE GOOD GUIDE TO ELECTROFUSION JOINTING....Connect

Status Date Prepared Reviewed Endorsed Approved

The ACT External HEPA Push-Through Filter Assembly. A. A. Frigo, S. G. Wiedmeyer, D. E. Preuss, E. F. Bielick, and R. F. Malecha

Glulam Connection Details

INNOVATION IN ACTION. HEAD OFFICE Warrego Highway Dalby QLD BRISBANE OFFICE 60 Kingsford Smith Drive Albion QLD 4010

ISO INTERNATIONAL STANDARD. Non-destructive testing of welds Radiographic testing of fusionwelded

Assembly Instructions

ISO INTERNATIONAL STANDARD. Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers

FRIATOOLS. Operating instructions Scraper tool FWSG 315. Update:

ISO INTERNATIONAL STANDARD

COMPLETE REVISION October Process Industry Practices Piping. PIP PNFJ8000 Jacketed Piping Fabrication and Installation Details

ISO INTERNATIONAL STANDARD. Hexalobular internal driving feature for bolts and screws. Empreinte à six lobes internes pour vis

Consideration of External Pressure in the Design and Pressure Rating of Subsea Equipment API TECHNICAL REPORT 17TR12 FIRST EDITION, MARCH 2015

2D Laser Cutting. Rotary Laser Cutting. Folding and Bending. Fabrication. Mig & Tig Welding. Complete Project Management

LC6X4WTM Security Wall Mount with Tilt for up to 60" Flat Screens with VESA 600mm x 400mm or less

AWADUCT FLEX-CONNECT PIPE COUPLER

Installation and Maintenance Instructions

9 PIECE TUNGSTEN CARBIDE HOLE SAW KIT. Model 90721

Keysight 86205B RF Bridge

TEST REPORT IEC Safety of Transportable Motor-Operated Power Tools

FORTRESS BOTTOM PLATE ANCHORS. Product. Scope. Building Regulations. Appraisal No. 687 [2017]

Fletcher F-3000 / F-3100 Accessory Laser Kit

Standard for Subsea High Integrity Pressure Protection Systems (HIPPS) API STANDARD 17O SECOND EDITION, JULY 2014

civil product range JUNCTION BOXES DUCT CHANNELS AND COVERS Gas Line Cover Slabs ESB Railways ROAD GULLY AND LIDS

LIFE TIME. polycarbonate sheeting

American Power Design, Inc.

AAMA Voluntary Guideline For Engineering Analysis of Window and Sliding Glass Door Anchorage Systems

ISO 3213 INTERNATIONAL STANDARD. Polypropylene (PP) pipes Effect of time and temperature on the expected strength

ISO 7465 INTERNATIONAL STANDARD. Passenger lifts and service lifts Guide rails for lift cars and counterweights T-type

Quick-Drain Installation Requirements Large Volume Drainage Models

PBM-UNI Installation Guide

ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE

This document is a preview generated by EVS

LC200C9F Ceiling Mount for up to 32" Flat Panel Screens with 200mm x 200mm VESA Mounting Patterns

TEST REPORT IEC Electromagnetic Compatibility (EMC)

CERTIFIED MAIL: September 1, 2016

Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings DWV

DIRECT BURY SYSTEM CABLE-TIGHT WIRE MANAGEMENT SYSTEM PIPING & CONTAINMENT SUBMERSIBLE PUMPING SYSTEMS

Copper Tube L AIR CONDITIONING & REFRIGERATION COPPER TUBE AS/NZS 1571 ASTM B280 BSEN

ISO INTERNATIONAL STANDARD. Hexagon socket head cap screws with metric fine pitch thread. Vis à tête cylindrique à six pans creux à pas fin

LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns

ACC-6SMRP2U Data Sheet

ISO INTERNATIONAL STANDARD. Timber structures Dowel-type fasteners Part 1: Determination of yield moment

I dedicate this book to the Lord Jesus Christ, my mentor and teacher. Proverbs 16:3 NOTICE TO THE READER ABOUT THE AUTHOR

ISO INTERNATIONAL STANDARD

DATA SHEET. BZX884 series Voltage regulator diodes DISCRETE SEMICONDUCTORS. Product data sheet Supersedes data of 2003 May Mar 26 BOTTOM VIEW

ABOUT INLAND. Tannis Karklin, E.I.T Technical Sales and Marketing

Alfa Laval Material Standard T

CONSULTANT ACCREDITATION SCHEME SEWER DESIGN

ISO INTERNATIONAL STANDARD

NV4V31SF. Data Sheet R08DS0070EJ0100 Rev Blue-Violet Laser Diode 405 nm Blue-Violet Laser Light Source DESCRIPTION FEATURES APPLICATIONS

ISO INTERNATIONAL STANDARD

Fastener and Sealant Selector Guide Trimo Insulated Panels - Qbiss One

Double Coated Tapes with Adhesive 300MP B 9690F LE

Installation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com

Excavating, Backfilling, and Compaction for Utilities Piping (Plumbing).

Stepping ahead in technology & innovation PIPING INSTITUTE OF TECHNOLOGY & ANALYSIS SOLUTIONS

LC200DS2 Double Stud Dual Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns

VALVES AND PENSTOCKS FOR WATER

LC200WT Security Wall Mount with Tilt for up to 32" Flat Screens

AC Line Rated Ceramic Disc Capacitors Class X1, 400 V AC / Class Y2, 300 V AC / 250 V AC

AVAILABLE SIZES. Label Length (mm) Label Length (inches) PART NUMBER EXAMPLE EET P 4. Color (Yellow) Material (Polyester) Width (15.

Bio-Sand Filtration Mould Construction Guidelines

Type Sealing Poles Contact configuration Rated voltage Model. Type LED indicator Poles Rated voltage Model

SX204. Headphone Amplifier. Symetrix. Owner s Manual

Type Poles Contact configuration Rated voltage Model G7S-4A2B 24 VDC 3PST-NO, 3PST-NC

ISO/TR TECHNICAL REPORT. Ergonomics Construction and application of tests for speech technology

Standards Manager Web Standards List PPI-Plastic Pipe Institute

Quick-Drain Installation Requirements

ISO INTERNATIONAL STANDARD

Continuous On-line Measurement of Water Content in Petroleum (Crude Oil and Condensate)

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA48015F. 1.5 V Three-Terminal Low Dropout Voltage Regulator with Output Current of 1 A

STEAM QUALITY TEST ELBOWS

Stop Gates & Stop Logs. Series 500. ine. Manufacturing high quality gates since 1977

TPM + Lenze ECS. Quick Startup Guide D Revision: 02

Transcription:

AKATHERM HDPE DRAINAGE JULY 2016

PE DRAINAGE The Akatherm HDPE system has a full range which includes pipes, bends, junctions, reducers, traps and electrofusion couplers. Akatherm HDPE has high temperature and chemical resistance which makes it ideal for drainage in, apartments and commercial buildings through to industrial use. It is flexible and tough and can be installed underground and embedded in concrete. It is a closed system which makes it ideal for many trade waste applications like industrial and laboratory fluids where system integrity and secure connections are critical. Akatherm PE drainage complies with EN1519 and has water mark certification for AS/NZS 4401 and AS/NZS 5065 Marley also supplies Akasison siphonic and Akavent high rise PE systems so please contact us for further information on these specialist systems. Item Number Wall Thickness (mm) PE DRAINAGE PIPE 5 METRES A100400 40mm x 5m 3 A100500 x 5m 3 A105600 56mm x 5m 3 A100600 x 5m 3 A100700 x 5m 3 A100900 x 5m 3.5 A101100 x 5m 4.2 A101200 x 5m 4.8 A101600 x 5m 6.2 A102010 x 5m 7.7 A102510 2 x 5m 9.6 A103110 315mm x 5m 12.1 PE DRAINAGE BEND 45 A120445 A120545 40mm A125645 56mm A120645 A120745 A120945 A121145 A121245 A121645 A122045 A122545 2 A123145 315mm 2

PE DRAINAGE BEND 88 A120488 40mm A120588 A125688 A120688 A120788 A120988 A121188 A121288 A121688 A122088 A122588 A123188 56mm 2 315mm REDUCER ECCENTRIC A160504 A165604 A165605 A160604 REDUCER /40mm REDUCER 56mm/40mm REDUCER 56mm/ REDUCER /40mm A160605 REDUCER / A160656 A160704 A160705 A160706 A160756 A160904 A160905 A160956 A160906 A160907 REDUCER /56mm REDUCER /40mm REDUCER / REDUCER / REDUCER /56mm REDUCER /40mm REDUCER / REDUCER /56mm REDUCER / REDUCER / A161104 REDUCER /40mm A161105 REDUCER / A161156 REDUCER /56mm A161106 REDUCER / A161107 REDUCER / A161109 REDUCER / A161205 REDUCER / A161256 A161206 A161207 A161209 REDUCER /56mm REDUCER / REDUCER / REDUCER / 3

REDUCER ECCENTRIC LONG A161211 REDUCER / A161611 REDUCER / A161612 REDUCER / A142012 REDUCER / A142016 A142520 A143120 A143125 REDUCER / REDUCER 2/ REDUCER 315mm/ REDUCER 315mm/2 CLEANOUT BRANCH 90 A230400 A230500 A230900 A231120 A231200 A231600 A232000 A232500 CLEANOUT BRANCH 40mm CLEANOUT BRANCH CLEANOUT BRANCH CLEANOUT BRANCH CLEANOUT BRANCH / CLEANOUT BRANCH / CLEANOUT BRANCH / CLEANOUT BRANCH 2/ JUNCTIONS 88.5 A200404 A201111 A201156 JUNCTION 40mm JUNCTION JUNCTION /56mm JUNCTIONS 45 A300404 A300504 A300505 A305604 A305605 A305656 A300604 A300605 A300656 A300606 A300704 A300705 JUNCTION 40mm JUNCTION /40mm JUNCTION JUNCTION 56mm/40mm JUNCTION 56mm/ JUNCTION 56mm JUNCTION /40mm JUNCTION / JUNCTION /56mm JUNCTION JUNCTION /40mm JUNCTION / 4

JUNCTIONS 45 CONTINUED A300706 A300707 A300756 A300904 A300905 A300906 A300907 A300909 A300956 A301104 A301105 A301106 A301109 A301111 A301156 A301204 A301205 A301256 A301206 A301207 A301209 A301211 A301212 A301605 A301606 JUNCTION / JUNCTION JUNCTION /56mm JUNCTION /40mm JUNCTION / JUNCTION / JUNCTION / JUNCTION JUNCTION /56mm JUNCTION /40mm JUNCTION / JUNCTION / JUNCTION / JUNCTION JUNCTION /56mm JUNCTION /40mm JUNCTION / JUNCTION /56mm JUNCTION / JUNCTION / JUNCTION / JUNCTION / JUNCTION JUNCTION / JUNCTION / A301607 JUNCTION / A301609 A301611 A301612 A301616 A302006 A302007 A302009 A302011 A302012 A302016 A302020 JUNCTION / JUNCTION / JUNCTION / JUNCTION JUNCTION / JUNCTION / JUNCTION / JUNCTION / JUNCTION / JUNCTION / JUNCTION 5

PE DRAINAGE EXPANSION SOCKET A400420 A400520 A405620 A400620 A420720 A420920 A421120 A421220 A421620 A402060 A402560 A403160 40mm 56mm 2 315mm PE DRAINAGE ELECTROFUSION COUPLER A410495 40mm A410595 A415695 A410695 A410795 A410995 A411195 A411295 A411695 A412065 A412565 A413165 56mm 2 315mm INSPECTION CAP AND BASE A660640 A660940 A661140 END CAP ( BUTT WELD ) A670407 A670507 A675607 A670607 40mm 56mm 6

END CAP ( BUTT WELD ) CONTINUED A670707 A670907 A671107 A671209 A671609 A672009 A672509 A673109 2 315mm TRAP A040401 S TRAP 40mm A050501 S TRAP 4 FOLD BOSS JUNCTION 88.5 A441114 110/50 88.5 ACCESSORIES A419810 A419910 A419971 A419972 A419975 AKAFUSION WELDER CB160 (40-) AKAFUSION WELDER CB315-U (40-315mm) CB315-U YELLOW OUTPUT LEADS 40- CB315-U BLUE OUTPUT LEADS 200-315mm CB315-U BLUE OUTPUT LEADS 200-315mm 7

WORKING WITH MARLEY FOR A BETTER TOMORROW DISCLAIMER This PE Drainage price list has been compiled by Marley New Zealand Limited ( The Company ) and is supplied subject to acknowledgment of the following conditions: The PE Drainage price list is protected by Copyright and may not be copied or reproduced in any form or by any means in whole or in part without prior consent in writing by the Company. Prices are subject to change, product specifications, usage data and advisory information may also change from time to time with advances in research and field experience. Industry standards are also subject to change, at the time of printing all products featured in this publication adhere to the relevant New Zealand standards where applicable. The Company reserves the right to make such changes to price or product information at any time without notice. Correct usage of the Company s products involve engineering judgements which cannot be properly made without full knowledge of all the conditions pertaining to each specific installation. The Company expressly disclaims all and any liability to any person whether supplied with this publication or not in respect of anything and of the consequences of anything done or omitted to be done by any such person in reliance whether whole or partial upon the whole or any part of the contents of this publication. No offer to trade, nor any conditions of trading, are expressed or implied by the issue or content of this manual. Nothing herein shall override the Company s Conditions of Sale, which may be obtained from the Registered Office or any Sales Office of the Company. This PE Drainage price list is and shall remain the property of the Company, and shall be surrendered on demand to the Company. AUCKLAND - Mahia Road, Manurewa, Private Bag 802, Manurewa. Sales Department Tel: 09 279 2777 Direct Fax: 09 279 2778 Freefax: 0800 652 621 Head Office Tel: 09 279 2799 Fax: 09 279 2798 CONTACT CENTRE: 0800 627 539 CHRISTCHURCH Shands Road, Hornby, PO Box 16233 Christchurch. CONTACT CENTRE: 0800 627 539 MAR2375 July 2016 For more information: FREEPHONE 0800 MARLEY (0800 627 539) www.marley.co.nz