MACO MULTI-MATIC TILT & TURN Window System MULTI POWER fully concealed hardware - Tricoat INSTALLATION INSTRUCTIONS
150 kg Key Sash rebate height Sash rebate width Tilt-only window Maximum sash weight Page 2
Applications / processing information 1 2600 2500 70 kg/m² 60 kg/m² 50 kg/m² 40 kg/m² 2300 2100 1900 1700 1500 1300 1100 900 700 500 300 : 1,5 400 600 800 1000 1200 1400 2 3 max. 150 kg 1 Application diagram 2 Maximum sash weight For 3-sashed window max. 80 kg! 3 Page 3
Single Tilt & Turn Window - Exploded Parts View Page 4
Single Tilt & Turn Window Hardware List FRAME COMPONENTS Coastal Part # Supplier # TT-MMP08-TR 225535 MM Power Scissor Stay Arm 600/800 13V Right Hand TT-MMP09-TR 225536 MM Power Scissor Stay Arm 600/800 13V Left Hand TT-MMP10-TR 225537 MM Power Scissor Stay Arm 1050/1300 13V Right Hand TT-MMP11-TR 225538 MM Power Scissor Stay Arm 1050/1300 13V Left Hand TT-MMP16-TR 218885 MM Power Pivot Post 13V Left Hand TT-MMP17-TR 218886 MM Power Pivot Post 13V Right Hand TT-MMP18-TR 364498 MM Power Pivot Post Cover Right Hand TT-MMP19-TR 364499 MM Power Pivot Post Cover Left Hand TT-MMP20-TR 105152 MM Power Screws for Hinges TT-MMP23-TR 366635 is Strike Frame Keep TT-MMP24-TR 369981 MM is TBT Frame Strike TT-MMP25-TR 204972 Stabilizing Stay Striker Plate TT-MMP35-TR 355715 Bottom Hinge Frame Dowel (Cill) TT-MMP43-TR 357922 MM Sash Lifter Right Hand TT-MMP44-TR 357923 MM Sash Lifter Left Hand SASH COMPONENTS Coastal Part # Supplier # TT-MMP01-TR 207566 MM Short Corner Element with 1 is Cam TT-MMP02-TR 207567 MM Security Corner Element with 2 is Cams TT-MMP03-TR 225296 MM Power Scissor Stay Faceplate 600mm TT-MMP04-TR 225297 MM Power Scissor Stay Faceplate 800mm TT-MMP05-TR 225298 MM Power Scissor Stay Faceplate 1050mm TT-MMP06-TR 225299 MM Power Scissor Stay Faceplate 1300mm TT-MMP07-TR 223023 MM TBT Stabilizing Stay TT-MMP12-TR 218772 Faceplate Ext 235 without Serrated Carrier with 1 is Cam TT-MMP13-TR 210482 Faceplate Extensions B-TV 500mm with 1 is Cam TT-MMP14-TR 210481 Faceplate Extensions B-TV 750mm with 1 is Cam TT-MMP15-TR 207446 Centre Locks Extendable 1280mm with 1 is Cam TT-MMP21-TR 218881 MM Power Corner Support Right Hand TT-MMP22-TR 218882 MM Power Corner Support Left Hand TT-MMP26-TR 257877 Adaptor Pieces TT-MMP27-TR 207468 MM 15mm VHH Drive Gear 800mm with No is Cams TT-MMP28-TR 207469 MM 15mm VHH Drive Gear 1250mm with 1 is Cam TT-MMP29-TR 208318 MM 15mm VHH Drive Gear 1750mm with 2 is Cams TT-MMP30-TR 208319 MM 15mm VHH Drive Gear 2250mm with 3 is Cams TT-MMP31-TR 207575 MM Hinge Side Corner Element with 1 is Cam Faceplate TT-MMP34-TR 210480 Extensions B-TV 1000mm with 2 is Cams TT-MMP36-TR 207444 Faceplate Ext Extendable 235 with 1 is Cam TT-MMP38-TR 207447 Centre Locks Single Piece Extendable with 1 is Cam TT-MMP66-TR 218772 Faceplate Ext 235 without Serrated Carrier with 1 is Cam ADDITIONAL COMPONENTS Coastal Part # Supplier # TT-MMP39-TR 43551 Tilt Restrictor for Stay Gr 00-1 (400/600/800) (Only Required in Certain Scenarios) TT-MMP40-TR 43552 Tilt Restrictor for Stay 1050/1300 (Only Required in Certain Scenarios) TT-MMP41-TR 43613 Stab Stay Tilt Restrictor (Only Required in Certain Scenarios) Page 5
Double Tilt & Turn Window - Exploded Parts View Page 6
FRAME COMPONENTS Double Tilt & Turn Window Hardware List Coastal Part # Supplier # TT-MMP08-TR 225535 MM Power Scissor Stay Arm 600/800mm 13V Right Hand TT-MMP09-TR 225536 MM Power Scissor Stay Arm 600/800mm 13V Left Hand TT-MMP10-TR 225537 MM Power Scissor Stay Arm 1050/1300mm 13V Right Hand TT-MMP11-TR 225538 MM Power Scissor Stay Arm 1050/1300mm 13V Left Hand TT-MMP16-TR 218885 MM Power Pivot Post 13V Right Hand TT-MMP17-TR 218886 MM Power Pivot Post 13V Left Hand TT-MMP18-TR 364498 MM Power Pivot Post Cover Right Hand TT-MMP19-TR 364499 MM Power Pivot Post Cover Left Hand TT-MMP20-TR 105152 MM Power Screws for Hinges TT-MMP23-TR 366635 is Striker Frame Keep TT-MMP24-TR 369981 MM is TBT Frame Strike TT-MMP25-TR 204972 Stabilizing Stay Striker Plate TT-MMP35-TR 355715 Bottom Frame Hinge Dowel TT-MMP64-TR 225323 MM Power Turn Only Scissor Stay Arm 13V Right Hand TT-MMP65-TR 225324 MM Power Turn Only Scissor Stay Arm 13V Left Hand SASH COMPONENTS Coastal Part # Supplier # TT-MMP02-TR 207567 MM Security Corner Element with 2 is Cams TT-MMP03-TR 225296 MM Power Scissor Stay Faceplate 600mm TT-MMP04-TR 225297 MM Power Scissor Stay Faceplate 800mm TT-MMP05-TR 225298 MM Power Scissor Stay Faceplate 1050mm TT-MMP06-TR 225299 MM Power Scissor Stay Faceplate 1300mm TT-MMP07-TR 223023 MM TBT Stabilizing Stay TT-MMP13-TR 210482 Faceplate Extensions B-TV 500mm with 1 is Cam TT-MMP14-TR 210481 Faceplate Extensions B-TV 750mm with 1 is Cam TT-MMP15-TR 207446 Centre Locks Extendable 1280mm with 1 is Cam TT-MMP21-TR 218881 MM Power Corner Support Right Hand TT-MMP22-TR 218882 MM Power Corner Support Left Hand TT-MMP26-TR 357877 Adapter Pieces TT-MMP31-TR 207575 MM Hinge Side Corner Element with 1 is Cam TT-MMP34-TR 210480 Faceplate Extensions B-TV 1000mm with 2 is Cams TT-MMP38-TR 207447 Centre Locks Single Piece Extendable with 1 is Cam TT-MMP46-TR 211241 MM Corner for Bottom of Drive Gear TT-MMP47-TR 207449 T&T Drive Gears BS 431/660mm 15 FHH with no is Cams TT-MMP48-TR 207450 T&T Drive Gears BS 661/840mm 15 FHH with 1 is Cam TT-MMP49-TR 207451 T&T Drive Gears BS 841/1090mm 15 FHH with 1 is Cam TT-MMP50-TR 207452 T&T Drive Gears BS 1091/1340mm 15 FHH with 1 is Cam TT-MMP51-TR 207453 T&T Drive Gears BS 1341/1590mm 15 FHH with 2 is Cams TT-MMP52-TR 207454 T&T Drive Gears BS 1591/1700mm 15 FHH with 2 is Cams TT-MMP53-TR 207455 T&T Drive Gears BS 1701/1950mm 15 FHH with 3 is Cams TT-MMP54-TR 207456 T&T Drive Gears BS 1951/2200mm 15 FHH with 3 is Cams TT-MMP55-TR 207457 T&T Drive Gears BS 2201/2450mm 15 FHH with 4 is Cams TT-MMP56-TR 207575 MM Hinge Side Corner Element with 1 is Cam TT-MMP58-TR 207565 2 Sashed with 1 is Cam and Striker TT-MMP60-TR 225301 MM Power Turn Only Scissor Stay Faceplate 600mm TT-MMP61-TR 225302 MM Power Turn Only Scissor Stay Faceplate 800mm TT-MMP62-TR 225303 MM Power Turn Only Scissor Stay Faceplate 1050mm TT-MMP63-TR 225304 MM Power Turn Only Scissor Stay Faceplate 1300mm TT-MMP67-TR 207630 French Casement Drive Gears for Eurogroove FFH 600mm TT-MMP68-TR 207631 French Casement Drive Gears for Eurogroove FFH 840mm TT-MMP69-TR 207632 French Casement Drive Gears for Eurogroove FFH 1090mm TT-MMP70-TR 207633 French Casement Drive Gears for Eurogroove FFH 1340mm TT-MMP71-TR 207634 French Casement Drive Gears for Eurogroove FFH 1590mm TT-MMP72-TR 207635 French Casement Drive Gears for Eurogroove FFH 1700mm TT-MMP73-TR 207636 French Casement Drive Gears for Eurogroove FFH 1950mm TT-MMP74-TR 207637 French Casement Drive Gears for Eurogroove FFH 2200mm TT-MMP75-TR 207638 French Casement Drive Gears for Eurogroove FFH 2450mm Page 7
Applications / processing information 4 5 6 7 Max. 7,2 min.24 4,5 Min.* Max. 38 min.12 +1 max.20 Min.** 4,5 min. 3 4 Applications: For restrictor * with corner element 1 i.s. SRW 465 mm ** with MACO restrictor and cleaning stay Use a stabilising scissor-stay for SRW Use supporting dowels (36668) to sash weight. 7 Overlap: Grind at the overlap (without proper tilting of the window sash. Clean constructional soiling from hardware and grease. properly. Non-observance will render 5 Screw dimension: For fastening the pivot post and scissor stay hinge in TIMBER and PVC. Use special screw 4.5x38 Fastening acc. to TBDK! Timber: contact. PVC: the screw connection must go through the steel reinforcement. 6 Rebate depth: min. 24 mm Air gap: min. 12 +1 mm Page 8
components Installing the scissor arm with jig Place the scissor stay arm with hinge and screw to fasten. Installing the pivot post Place the pivot post and screw to fasten. 60Kg sash weight Page 9
components Installing the cover 1 1 Open the pivot post 2 2 Insert the cover in the corners Page 10
components Installing the cover 3 3 Clip the cover onto the base plate. Air gap: min. 12 +1 mm Sash rebate depth: min. 24 mm Page 11
components All dimension refer to the dimensions: 12 mm air gap 115 D B2 B1 A + A1 + A2 + A3 Sash lifter 361 1 B 262 2 115 4 Handle position (= centre of spindle) 115 3 155 C Page 12
components gap Large drive gear A 125 34 164 441 264 586 364 686 464 921 564 914 796 1466 914 796 1466 914 796 1466 1966 Faceplate extension/ centre lock C B 235 326 466 565 565 1977 scissor-stay size D 565 Page 13
Installation of the sash components Handle drill hole Dimension X Size 1 X 125 2 1 (Ø 3 Ø 3 Ø 3) (Ø 12 Ø 3 Ø 12) 2 Edge of sash rebate rebate and pre-drill using Ø 3 mm and Ø 12 mm drills. on sash and apply the drive gear drilling Page 14
Installation of the sash components Handle drilling-hole patterns 1 2 10 12 12 12 12 25 43 43 43 10 12 12 1 PVC for window handle with 2 Timber for window handle with 12 mm lug Page 15
Installation of the sash components 5 5 1 4 6 90 8,3 3 0,3 5 7 7 2 6 8 38 Page 16
Installation of the sash components 1 Insert Corner element and fasten. 2 Insert Corner element horizontally and fasten. 3 Cut Drive gear corner element horizontally in parallel and fasten together with the Corner elements.** 4 Insert Corner element vertically and 5 Cut corner element horizontally in parallel and fasten together with the corner elements. 6 Insert Centre lock and fasten (from 7 Insert C and fasten. 8 and/or opening restrictor. the centre anchors are released. The sash lifter on the drive gear must be activated by rotating it outwards. Page 17
Installation of the sash components 120 114 90 1. support 2. Timber: Insert the mounting strap in the PVC:! Turn limiter with shortened! Turn limiter with extended Page 18
Installation of the sash components 120 155 90 1. corner support 2. Timber: opening restrictor with sloped screw fixing into the rebate. PVC: see profile sheets Page 19
Hinge the T&T sash 2 1 3 Open the safety catch of the scissor-stay arm 1 sor-stay arm up against the frame 2. 3. 5 6 4 Perform mishandling at the mishandling device 4 and turn the handle to tilt position 5. Place the sash tilted slightly parallel to the frame on both pivot post bolts 6. Page 20
Hinge the T&T sash 11 8 7 9 Fold out the scissor stay arm 7 and press into the scissor stay faceplate 8 so that the scissor stay arm bolts engage in the scissor stay faceplate. Close the scissor stay are retainer 9 Perform mishandling at the mishandling device and turn the handle to turn position 11. See video www.maco.at Page 21
Hinging the rotatable sash 2 1 3 Open the safety catch of the scissor-stay arm 1 scissor-stay arm up against the frame 2. 3. 4 5 6 Place the sash tilted slightly parallel to the frame on both pivot post bolts 4. the drive gear side 5 and fold out the turn arm 6. Page 22
Hinging the rotatable sash 8 7 9 Press the turn arm onto the turn faceplate and lift the sash on the drive gear side 7. Then press in the turn arm 8 so that the turn arm bolts engage in the turn faceplate. arm retainer 9. See video www.maco.at Page 23
Unhinge T&T sash 3 4 1 2 1. Perform mishandling at the mishandling device 2 and turn the handle to tilt position 3. Open scissor-stay arm with SW4 Allen 4. 5 6 Lift the scissor-stay arm 5 so that the scissor stay arm bolts are free. Then fold the scissor stay arm 6. Page 24
Unhinge T&T sash 8 9 7 Perform mishandling at the mishandling device 7 and turn the handle to turn position 8 and close the sash. Tilt the sash slightly and lift it up and out along the frame 9. See video www.maco.at Page 25
Unhinge the turn-only sash 3 1 2 5 4 1-2. Lift the turn arm 3 are free. Lower the sash slightly on the drive gear side 4 5. 6 Close the sash Tilt the sash slightly and lift it up and out along the frame 6. See video www.maco.at Page 26
Settings 1a 1b 1a Turn out the safety catch in the desired lifter is subsequently fully operational. Set to the required height by turning the 1b Bring the lever to its centre position. In Page 27
Settings Compression 1 2 * + * + * Standard 1 Locking cam 2 3 3 Scissor stay. Page 28
Settings Compression 4 4 ± 1 mm with SW 4 Compression 5 5 Pivot post Page 29
Settings 6 6 + 2 / 1 mm with SW 4 7 7 Scissor stay are with hinge and T&T hinge arm with hinge + Page 30
Settings 8 8 + 2 / 1 mm with SW 4 Page 31
Safety and neglect instruction 1 2 3 1 2 Do not press sashes up against the 3 Do not insert anything in the opening gap 4 5 6 4 in the opening gap between the sash and frame. 5 6 Do not leave sashes open in the turnmode during strong winds. Page 32
Operating instructions 1 2 3 4 * 1 2 3 Only use cleaning and maintenance 4 Security-relevant hardware components must be examined for wear and tear at Clean constructional soiling from hardware and grease the hardware. Page 33
Maco Tricoat Tilt & Turn Part Identification Below are images of the Tilt & Turn parts, in conjunction with the A1 drawings you should be able to identify the parts and where they live within the product. Coastal Part TT-MMP01-TR 207566 MM Short Corner Element with 1 is Cam [Single Window Sash] Coastal Part TT-MMP02-TR 207567 MM Security Corner Element with 2 is Cams [Single & Double Master Window Sash] Page 34
Coastal Part TT-MMP03-TR (a) TT-MMP04-TR (b) TT-MMP05-TR (c) TT-MMP06-TR (d) 225296 (a) 225297 (b) 225298 (c) 225299 (d) MM POWER Scissor Stay Faceplate (a) 600mm (b) 800mm (c) 1050mm (d) 1300mm Coastal Part TT-MMP07-TR 223023 MM TBT Stabilizing Stay [Single & Double Master Window Sash] Page 35
Coastal Part TT-MMP08-TR (a) TT-MMP09-TR (b) TT-MMP10-TR (c) TT-MMP11-TR (d) 225535 (a) 225536 (b) 225537 (c) 225538 (d) MM POWER Scissor Stay Arm 13V a) 600/800 Right Hand b) 600/800 Left Hand c) 1050/1300 Right Hand d) 1050/1300 Left Hand Coastal Part TT-MMP12-TR TT-MMP66-TR 218772 Faceplate Extension 235mm without Serrated Carrier, with 1 is Cam [Single, Double Master & Slave Window Sash] Page 36
Coastal Part TT-MMP13-TR (a) TT-MMP14-TR (b) 210482 (a) 210481 (b) Faceplate Extensions B-TV 500mm with 1 is Cam a) 500mm b) 750mm [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP15-TR 207446 Centre Lock Extendable 1280 with 1 is Cam [Single, Double Master & Slave Window Sash] Page 37
Coastal Part TT-MMP16-TR 218885 MM POWER Pivot Post 13V Right Hand [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP17-TR 218886 MM POWER Pivot Post 13V Left Hand [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP18-TR 364498 MM POWER Pivot Post Cover Right Hand [Single, Double Master & Slave Window Sash] Page 38
Coastal Part TT-MMP19-TR 364499 MM POWER Pivot Post Cover Left Hand [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP20-TR 105152 MM POWER Screws for Hinges [Single, Double Master & Slave Window Sash] Page 39
Coastal Part TT-MMP21-TR 218881 MM POWER Corner Support Right Hand [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP22-TR 218882 MM POWER Corner Support Left Hand [Single, Double Master & Slave Window Sash] Page 40
Coastal Part TT-MMP23-TR 366635 is Frame Strike [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP24-TR 369981 MM is TBT Frame Strike [Single & Double Master Window Sash] Page 41
Coastal Part TT-MMP25-TR 204972 Stabilizing Stay Striker Plate [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP26-TR 357877 Adaptor Pieces [Single, Double Master & Slave Window Sash] Page 42
Coastal Part TT-MMP27-TR (a) TT-MMP28-TR (b) TT-MMP29-TR (c) TT-MMP30-TR (d) 207468 (a) 207469 (b) 208318 (c) 208319 (d) (a) MM 15mm VHH Drive Gear 800 with No is Cams (470/800mm) (b) MM 15mm VHH Drive Gear 1250mm with 1 is Cam (801/1250mm) (c) MM 15mm VHH Drive Gear 1750mm with 2 is Cams (1251/1750mm) (d) MM 15mm VHH Drive Gear 2250mm with 3 is Cams (1751/2250mm) [Single & Double Master Window Sash] Page 43
Coastal Part TT-MMP31-TR 207575 MM Hinge Side Corner Element with 1 is Cam [Single & Double Slave Window Sash] Coastal Part TT-MMP34-TR 210480 Faceplate Extensions B-TV 1000mm with 2 is Cams [Single, Double Master & Slave Window Sash] Page 44
Coastal Part TT-MMP35-TR 355715 Bottom Hinge Frame Dowel (CILL) [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP36-TR 207444 Faceplate Ext Extendable 235 with 1 is Cam [Single Window Sash] Page 45
Coastal Part TT-MMP38-TR 207447 Centre Locks Single Piece Extendable with 1 is Cam [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP39-TR 43551 Tilt Restrictor for Stay Gr 00 1 (400/600/800) [Single Window Sash] Coastal Part TT-MMP40-TR 43552 Tilt Restrictor for Stay (1050/1300) [Single Window Sash] Page 46
Coastal Part TT-MMP41-TR 43613 Stab Stay Tilt Restrictor [Single Window Sash] Coastal Part TT-MMP43-TR 357922 MM Sash Lifter Right Hand [Single Window Sash] Coastal Part TT-MMP44-TR 357923 MM Sash Lifter Left Hand [Single Window Sash] Page 47
Coastal Part TT-MMP46-TR 211241 MM Corner for Bottom of Drive Gear [Double Slave Window Sash] Coastal Part TT-MMP47-TR (a) TT-MMP48-TR (b) TT-MMP49-TR (c) TT-MMP50-TR (d) TT-MMP51-TR (e) TT-MMP52-TR (f) TT-MMP53-TR (g) TT-MMP54-TR (h) TT-MMP55-TR (i) 207449 (a) 207450 (b) 207451 (c) 207452 (d) 207453 (e) 207454 (f) 207455 (g) 207456 (h) 207457 (i) T & T Drive Gear BS 15 FHH (a) (431/660) with No is Cams (b) (661/840) with 1 is Cam (c) (841/1090) with 1 is Cam (d) (1091/1340) with 1 is Cam (e) (1341/1590) with 2 is Cams (f) (1591/1700) with 2 is Cams (g) (1701/1950) with 3 is Cams (h) (1951/2200) with 3 is Cams (i) (2201/2450) with 4 is Cams [Double Master Window Sash] Page 48
Coastal Part TT-MMP58-TR 207565 2 Sashed with 1 is Cam and Striker [Double Slave Window Sash] Coastal Part TT-MMP60-TR (a) TT-MMP61-TR (b) TT-MMP62-TR (c) TT-MMP63-TR (d) 225301 (a) 225302 (b) 225303 (c) 225304 (d) MM POWER Turn Only Scissor Stay Faceplate (a) 600mm (b) 800mm (c) 1050mm (d) 1300mm [Double Slave Window Sash] Coastal Part TT-MMP64-TR 225323 MM POWER Turn Only Scissor Stay Arm 13V Right Hand [Double Slave Window Sash] Page 49
Coastal Part TT-MMP65-TR 225324 MM POWER Turn Only Scissor Stay Arm 13V Left Hand [Double Slave Window Sash] Coastal Part TT-MMP67-TR (a) TT-MMP68-TR (b) TT-MMP69-TR (c) TT-MMP70-TR (d) TT-MMP71-TR (e) TT-MMP72-TR (f) TT-MMP73-TR (g) TT-MMP74-TR (h) TT-MMP75-TR (i) 207630 (a) 207631 (b) 207632 (c) 207633 (d) 207644 (e) 207635 (f) 207636 (g) 207637 (h) 207638 (i) French Casement Drive Gears for Eurogroove FHH (a) 660mm (431/660) (b) 840mm (661/840) (c) 1090mm (841/1090) (d) 1340mm (1091/1340) (e) 1590mm (1341/1590) (f) 1700mm (1591/1700) (g) 1950mm (1701/1950) (h) 2200mm (1951/2200) (i) 2450mm (2201/2450) [Double Slave Window Sash] Page 50
Coastal Part TT-MMP77-TR 357887 Tilt Only Block [Single Window Only] Page 51
Scan for more Info Coastal Specialist Ironmongery Ltd Bojea Industrial Estate Trethowel St Austell Cornwall, PL25 5RJ e sales@coastal-group.com w www.coastal-group.com DRA-TTMMP-INST.pdf - 04102017 (A)