w/dante > > Engineered to deliver exceptional pro audio performance with faster, easier implementation > > Ready to go out of the box and extensively configurable > > Hybrid channel strip architecture > > Customizable input and output channel strips > > Eight internal aux buses with channel strips > > Full set of selectable channel strip objects > > Fully-adjustable matrix mixing > > Clean and intuitive software tool workspace > > Real-time configuration and without compiling > > Work offline or live via Ethernet or USB > > Native Crestron system integration for rapid programming [1] > > Seamless export of Smart Graphics touch screen UI files > > Seamless integration with Crestron DM > > Fully microphone mixing > > Logic output for control of cameras and switchers [1] > > Built-in real-time spectrum analyzer and noise generator > > Highest-quality converters, preamps, and line amps > > Twelve mic/line inputs with 66 db gain range > > Eight +24 db balanced line outputs > > 32x32 Dante audio network interface [2] > > Front panel VU meters > > Up to 32 real-time VU meters on a touch screen [1] > > Enterprise-grade Ethernet networking > > Crestron Fusion Cloud remote monitoring [1] > > Internal universal power supply > > Single-space 19 rack mountable > > Companion 8-channel power amplifiers available The Crestron Avia family of digital signal processors leverages the highest quality components and the expertise of veteran audio industry engineers to deliver a revolutionary audio processing platform that s actually easy to integrate and configure. It has all the features and performance top sound system designers demand complemented with an intuitive graphical workspace conceived to inspire exceptional results quickly. Delivering quality sound in any meeting space, performance venue, courtroom, sports facility, or house of worship demands high-performance, professional audio signal processing. A good digital signal processor (DSP) must deliver sophisticated processing, mixing, and routing for all types of audio signals with a comprehensive set of controls and s to manage the behavior and sound quality of each signal. Until now, DSP products have been either limited in their functionality and flexibility or too complicated and time consuming to implement economically. With Avia, Crestron has addressed all of those concerns. Hybrid Channel Strip Architecture Most common audio DSP products come in two basic forms fixed layout or fully-configurable. One offers out-of-the-box readiness with limited flexibility while the other is best suited for use by advanced-level audio engineers who desire a fully custom signal path. Crestron marries the best of both by employing a flexible architecture using customizable channel strips and matrix mixing. The channel strips in the DSP-1281 are composed of a of essential signal processing objects that are ready to use and logically arranged for optimal functionality. Fully-adjustable matrix mixing enables complete customization of the signal flow, allowing inputs to be mixed in any combination and routed to any of the outputs. Eight internal auxiliary busses are included to allow any of the inputs to be mixed and processed as a subgroup. Each input, output, and aux bus includes its own independently configurable channel strip, and any two adjacent channels can be grouped together for stereo. Avia Audio Tool Software Rapid system configuration and is enabled using the Avia Audio Tool software. Its clean, modern user interface provides a workspace that s easy and intuitive to navigate. The Avia Audio Tool allows setup and operation to be performed live over a USB or LAN connection, or virtual DSPs can be configured offline and uploaded locally or remotely. The Avia Audio Tool accelerates system setup by allowing custom channel strips to be quickly configured and saved into libraries, and then simply dragged and dropped to any input, output, or aux bus. Settings within any channel strip object or matrix bus can be copied and pasted easily between channels. Pre-configured channel strips are even included to jump-start
The Avia Audio Tool software workspace with several DSP objects open including a parametric equalizer with spectrum analyzer Note: The AEC objects shown are not supported by the DSP-1281 acoustic setup, with speaker profile settings optimized for Crestron Saros speakers. Custom views and virtual mixers can be arranged and saved at any time to easily move between different setup scenarios while commissioning the system. Selected settings and objects can be saved and recalled as presets to address room combining, reconfigurable seating, zone paging, and acoustical variations in ballrooms, convention halls, stadiums, and other configurable spaces. Built-in Real-Time Analyzer There s no need to lug an expensive RTA or signal generator on site when setting up an Avia DSP. They re built in! Every EQ and Filter object includes a professional spectrum analyzer display that overlays the A virtual mixer in the Avia Audio Tool software Crestron Control Integration [1] A complete audio DSP solution often includes integration with a control system to facilitate everyday operation and automation of the DSP and other equipment. A successful installation should be easy to operate using touch screens and keypads tailored to the customer s needs and preferences. But, the design and programming required to make that happen can be extensive and costly. Avia offers native Crestron control system integration to substantially reduce the amount of programming required. It even eliminates much of the touch screen UI design work by allowing components within the Avia Audio Tool to be selected and exported as a Smart Graphics file containing ready-to-use SmartObject touch screen controls and meters. In fact, along with a variety of buttons and sliders, Avia supports up to 32 real-time VU meters running simultaneously on a touch screen. With minimal programming, a system integrator can provide their customer with a touch screen control solution custom tailored to their needs, with anything from a few selectable presets and volume controls to a complete virtual mixing console. EQ/filter graph, providing precise real-time visualization to facilitate optimal of equalization and crossover settings. Your choice of test microphone(s) can be connected to any spare input(s) on the DSP-1281 and routed to the analyzer via either of two reference buses. A pink noise, white noise, or sine wave signal can be generated and routed to any of the outputs via a dedicated matrix bus. A touch screen user interface featuring volume control sliders and real-time VU meters
Additional functions enabled through the control system include the ability to assign automixer logic signals to control a motorized camera or camera switcher, enabling the video image to follow the current active microphone ally in a council chamber or courtroom. Additional integration with Crestron Fusion Cloud allows DSP activity and status to be centrally controlled, monitored, logged, and reported as part of a complete managed enterprise. Whatever the customer requires, a complete integrated Crestron system makes it possible. Dante Audio Networking System expansion and integration with other audio devices is facilitated using Dante audio networking. Dante networking provides an additional 32 mono inputs and 32 mono outputs with full matrix mixing. Multiple DSP-1281 units can be linked via Dante to expand the number of inputs and outputs in the system. Dante also provides a digital multichannel audio bridge to a Crestron DigitalMedia system via Dante-enabled DM switcher I/O blades. Additionally, Dante networking enables plug and play integration with other Dante-enabled mixers, switchers, sources, amplifiers, and computers. To simplify configuration of the Dante network, the Dante Controller application is built into the Avia Audio Tool. [2] DSP-1281 Front View DSP-1281 Rear View The Avia DSP family comprises five models designed to address a full range of applications: Model Analog Mic/Line Inputs +24 db Analog Outputs Internal Auxiliary Buses DSP-860 8 6 8 DSP-1280 12 8 8 Acoustic Echo Cancellation SIP/POTS Phone Interface 8x8 USB Audio I/O 32x32 Dante I/O DSP-1281 12 8 8 DSP-1282 12 8 8 DSP-1283 12 8 8 Front Panel Meters
Channel Strip Objects A complete arsenal of signal processing objects is included to customize each channel strip on every analog input, output, and aux bus: Analog Inputs Gain EQ/Filter Dynamics Delay Automix Gate Ducker mic/line input gain and attenuation settings 3-band tone EQ, 5-band graphic EQ, 5-band parametric EQ, 5-band notch filter, low-pass filter, high-pass filter, or bandpass filter compressor, limiter, or gain control time alignment delay microphone mixer, noise gate, or ducker Analog Outputs Dynamics EQ/Filter EQ/Filter 1 1 2 Delay Dynamics 2 Level compressor, limiter, or gain control time alignment delay compressor, limiter, or gain control output level settings 3-band tone EQ, 10-band graphic EQ, 10-band parametric EQ, 10-band notch filter, low-pass filter, high-pass filter, bandpass filter, or crossover w/5-band parametric EQ Aux Buses Dynamics EQ/Filter Delay Automix Gate Ducker compressor, limiter, or gain control 3-band tone EQ, 5-band graphic EQ, 5-band parametric EQ, 5-band notch filter, low-pass filter, high-pass filter, or bandpass filter time alignment delay microphone mixer, noise gate, or ducker
SPECIFICATIONS Audio General Analog-To-Digital Conversion: 24-bit 48 khz Digital-To-Analog Conversion: 24-bit 48 khz Frequency Response: 20 Hz to 20 khz ±0.5 db THD: 0.001%, 20 Hz to 20 khz, 0 db gain, +4 dbu input; 0.01%, 22 Hz to 22 khz, 54 db gain, -50 dbu input EIN: -125 dbu, 22 Hz to 22 khz, no weighting Dynamic Range: 110 db, 22 Hz to 22 khz, 0 db gain Crosstalk: -85 db, 1 khz, +4 dbu input, channel to channel -75 db, 1 khz, -50 dbu input, channel to channel Latency: 3.0 ms (analog in to analog out) Dante I/O: 32 channels in, 32 channels out, at up to 24-bit 48 khz Audio Matrix Mixer Matrix Crosspoint Settings: Gain: -80 to +20 db, Gain per crosspoint Mute: Mute enable/disable per crosspoint Audio Input Channels Analog Input Channels 1 12: Signal Types: Mono analog mic or line level, adjacent channels groupable for stereo Signal Flow: Mic Preamp / Line Input (Gain) > ADC > VU Meter > Channel Strip > Channel Trim > Matrix Mixer Channel Strip: Object 1: Gain Object 2: EQ/Filter Choice of 3-Band TEQ, 5-Band GEQ, 5-Band PEQ, 5-Band Notch Filter, LP Filter, HP Filter, or BP Filter Object 3: Dynamics Choice of Compressor, Limiter, or AGC Object 4: Delay Object 5: Automixer/Gate/Ducker Choice of Automixer, Gate, or Ducker Mute: Matrix input bus mute enable/disable per channel Gain: -80 to +20 db, matrix input bus gain per channel +48V: Phantom power enable/disable per channel VU Meter: -80 to +20 db, analog input level meter per channel (visible in System View only) Auxiliary Input Channels 1 8 (Internal): Signal Source: Fed internally from each corresponding Auxiliary Output Channel, adjacent channels groupable for stereo Signal Flow: Aux Output > Channel Strip > Channel Trim > VU Meter > Matrix Mixer Channel Strip: Object 1: Dynamics Choice of Compressor, Limiter, or AGC Object 2: EQ/Filter Choice of 3-Band TEQ, 5-Band GEQ, 5-Band PEQ, 5-Band Notch Filter, LP Filter, HP Filter, or BP Filter Object 3: Delay Object 4: Automixer/Gate/Ducker Choice of Automixer, Gate, or Ducker Mute: Matrix input bus mute enable/disable per channel Gain: -80 to +20 db, matrix input bus gain per channel VU Meter: -80 to +20 db, auxiliary input level meter per channel (visible in System View only) Signal Generator (Internal): Signal Flow: Signal Generator > Matrix Mixer Signal Generator Settings: Mute: On/Off, mute enable/disable Sine Freq: 20 to 20000 Hz, sine wave frequency Source: White noise, Pink noise, or Tone (sine wave); signal type Level: -60 to 0 db, level Dante Input Channels 1 32: Signal Flow: LAN > Channel Trim > VU Meter > Matrix Mixer Mute: Matrix input bus mute enable/disable per channel Gain: -80 to +20 db, matrix input bus gain per channel VU Meter: -80 to +20 db, Dante input level meter per channel (visible in System View only) Audio Output Channels Analog Output Channels 1 8: Signal Types: Mono analog line level, adjacent channels groupable for stereo Signal Flow: Matrix Mixer > Channel Trim > Channel Strip > VU Meter > DAC > Output Mute: Matrix output bus mute enable/disable per channel Gain: -80 to +20 db, matrix output bus gain per channel VU Meter: -80 to +20 db, analog output level meter per channel (visible in System View only) Channel Strip: Object 1: Dynamics Choice of Compressor, Limiter, or AGC Object 2: EQ/Filter Choice of 3-Band TEQ, 10-Band GEQ, 10-Band PEQ, 10-Band Notch Filter, LP Filter, HP Filter, BP Filter, or Crossover w/5-band PEQ Object 3: EQ/Filter Choice of 3-Band TEQ, 10-Band GEQ, 10-Band PEQ, 10-Band Notch Filter, LP Filter, HP Filter, BP Filter, or Crossover w/5-band PEQ Object 4: Delay Object 5: Dynamics Choice of Compressor, Limiter, or AGC Object 6: Output Level
Reference Output Channels 1 2 (Internal): Signal Flow: Matrix Mixer > Reference Signal to Channel Strip Objects Auxiliary Output Channels 1 8 (Internal): Signal Flow: Matrix Mixer > Channel Trim > VU Meter > Feed to Corresponding Auxiliary Input Channel Mute: Matrix output bus mute enable/disable per channel Gain: -80 to +20 db, matrix output bus gain per channel VU Meter: -80 to +20 db, auxiliary output level meter per channel (visible in System View only) Dante Output Channels 1 32: Signal Flow: Matrix Mixer > Channel Trim > VU Meter > LAN Mute: Matrix output bus mute enable/disable per channel Gain: -80 to +20 db, matrix output bus gain per channel VU Meter: -80 to +20 db, Dante output level meter per channel (visible in System View only) Audio Channel Strip Objects Gain: GAIN: Mic Preamp / Line Input Gain Stage Settings: Mute: On/Off, mute enable/disable Gain: -18 to +60 db in 3 db increments, analog gain +48V: On/Off, phantom power enable/disable Level: -80 to +10 db, level VU: -60 to 0 db, level meter (post-gain & ADC, pre-level & Mute) EQ/Filter: Spectrum Analyzer: Analyzer Settings: Level: -60 to 0 db, signal generator level Mute: On/Off, signal generator mute enable/disable Analyze: Start/Stop, analyzer start/stop control Smoothing: None, 1/24, 1/12, 1/6, 1/3, or 1 octave; display resolution Decay: Fast, 1/2, 1, 2, 4, or 8 seconds; decay time Window: None, Hamming, Hanning, or Blackman; window type Ref Select: Ref 1 2, reference signal bus TEQ: Tone Equalizer 3-Band TEQ Settings: Band 1 3: Selects or indicates which band is being adjusted Bypass All: On/Off, all EQ filters enable/disable Bypass (per band): On/Off, individual EQ filter enable/disable Gain (per band): -20 to +20 db, EQ filter gain Freq (per band): 20 to 20000 Hz, EQ filter frequency BW/Q (band 2 only): 0.1 to 2.0, EQ filter bandwidth Band (per band): Flat, sets the individual EQ filter gain to 0 db All: Flat, sets all EQ filters to 0 db GEQ: Graphic Equalizer 5-Band GEQ Settings: Band 1 5: Selects or indicates which band is being adjusted Bypass All: On/Off, all EQ filters enable/disable Bypass (per band): On/Off, individual EQ filter enable/disable Center Frequencies: 40, 160, 630, 2.5k, 10k Hz (fixed) Gain (per band): -20.0 to +20.0 db in 0.5 db increments, EQ filter gain Band (per band): Flat, sets the individual EQ filter gain to 0 db All: Flat, sets all EQ filters to 0 db
10-Band GEQ Settings: Band 1 10: Selects or indicates which band is being adjusted Center Frequencies: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz (fixed) (All other parameters same as 5-Band GEQ) PEQ: Parametric Equalizer 10-Band PEQ Settings: Band 1 10: Selects or indicates which band is being adjusted (All other parameters same as 5-Band PEQ) NOTCH: Notch Filter 5-Band PEQ Settings: Band 1 5: Selects or indicates which band is being adjusted Bypass All: On/Off, all EQ filters enable/disable Bypass (per band): On/Off, individual EQ filter enable/disable Type (per band): Parametric, Notch, Low shelf, High shelf, Low cut, or High cut; EQ filter type Gain/Slope (per band): -40 to +20 db, parametric filter gain ; or -40 to 0 db, notch filter gain ; or 20 to + 20 db, shelf filter gain ; or 6 or 12 db, cut filter slope Freq (per band): 20 to 20000 Hz, EQ filter frequency BW/Q (per band): 0.1 to 2.0 octave, parametric or cut filter bandwidth ; or 0.05 to 1.00 octave, notch filter bandwidth Band (per band): Flat, sets the individual EQ filter gain to 0 db (or 6 db slope for cut filters) All: Flat, sets all EQ filters to 0 db (or 6 db slope for cut filters) 5-Band Notch Filter Settings: Band 1 5: Selects or indicates which band is being adjusted Bypass All: On/Off, all notch filters enable/disable Bypass (per band): On/Off, individual notch filter enable/disable Gain (per band): -40 to 0 db, notch filter gain Freq (per band): 20 to 20000 Hz, notch filter frequency BW (per band): 0.05 to 1.00 octave, notch filter bandwidth Band (per band): Flat, sets the individual notch filter gain to 0 db All: Flat, sets all notch filters to 0 db 10-Band Notch Filter Settings: Band 1 10: Selects or indicates which band is being adjusted (All other parameters same as 5-Band Notch Filter)
LPASS: Low-Pass Filter LP Filter Settings: Bypass: On/Off, LP filter enable/disable Type: Butterworth, Chebyshev, Bessel, or Link-Riley; LP filter type Slope: 6, 12, 18, or 24 db, LP filter slope Freq: 20 to 20000 Hz, LP filter frequency Band: Flat, sets the LP filter frequency to 20 khz HPASS: High-Pass Filter BP Filter Settings: Band 1 2: Selects or indicates which band is being adjusted Bypass All: On/Off, all filters enable/disable Bypass (per band): On/Off, individual LP or HP filter enable/disable Type (per band): Butterworth, Chebyshev, Bessel, or Link-Riley; LP or HP filter type Slope (per band): 6, 12, 18, or 24 db, LP or HP filter slope Freq (per band): 20 to 20000 Hz, LP or HP filter frequency Band (per band): Flat, sets the LP filter frequency to 20 khz or the HP filter frequency to 20 Hz All: Flat, sets the LP filter frequency to 20 khz and the HP filter frequency to 20 Hz XOVER: Low, Mid, or High Frequency Crossover w/parametric Equalizer HP Filter Settings: Bypass: On/Off, HP filter enable/disable Type: Butterworth, Chebyshev, Bessel, or Link-Riley; HP filter type Slope: 6, 12, 18, or 24 db, HP filter slope Freq: 20 to 20000 Hz, HP filter frequency Band: Flat, sets the HP filter frequency to 20 Hz BPASS: BandPass Filter Crossover & 5-Band PEQ Settings: Band 1 7: Selects or indicates which band is being adjusted Bypass All: On/Off, all filters enable/disable Bypass (per band): On/Off, individual EQ, LP, or HP filter enable/ disable Type (per band 1 5): Parametric, Notch, Low shelf, High shelf, Low cut, or High cut; EQ filter type Type (per band 6 7): Butterworth, Chebyshev, Bessel, or Link- Riley; LP or HP filter type Gain/Slope (per band 1 5): -40 to +20 db, parametric filter gain ; or -40 to 0 db, notch filter gain ; or 20 to + 20 db, shelf filter gain ; or 6 or 12 db, cut filter slope Gain/Slope (per band 6 7): 6, 12, 18, or 24 db, LP or HP filter slope Freq (per band): 20 to 20000 Hz, EQ, LP, or HP filter frequency BW/Q (per band 1 5): 0.1 to 2.0 octave, parametric or cut filter bandwidth ; or 0.05 to 1.00 octave, notch filter bandwidth Band (per band 1 5): Flat, sets the individual EQ filter gain to 0 db (or 6 db slope for cut filters) All (per band 1 5): Flat, sets all EQ filters to 0 db (or 6 db slope for cut filters)
Dynamics: COMP: Compressor Compressor Settings: Bypass: On/Off, compressor enable/ disable Threshold: -60 to 0 db, compression threshold Ratio: 1.0:1 to 50.0:1, compression ratio Attack: 0.1 to 500.0 ms, attack time Release: 10 to 2000 ms, release time Soft Knee: On/Off, soft knee curve enable/disable Makeup Gain: 0.0 to 20.0 db, makeup gain VU: -60 to 0 db, post-compression level meter GR: -30 to 0 db, gain reduction level meter LIMITER: Limiter Limiter Settings: Bypass: On/Off, limiter enable/disable Threshold: -60 to 0 db, limiting threshold Ratio: 1.0:1 to 50.0:1, limiting ratio Attack: 0.1 to 500.0 ms, attack time Release: 10 to 2000 ms, release time Soft Knee: On/Off, soft knee curve enable/disable Makeup Gain: 0.0 to 20.0 db, makeup gain VU: -60 to 0 db, post-limiting level meter GR: -30 to 0 db, gain reduction level meter AGC: Automatic Gain Control AGC Settings: Bypass: On/Off, AGC enable/disable Target: -60 to 0 db, target level Range: 0 to 40 db, dynamic range Gain: 0.0 to 20.0 db, post-agc gain Attack: 0.1 to 50.0 ms, attack time Release: 10 to 500 ms, release time VU: -60 to 0 db, post-agc level meter Delay: DELAY: Time Alignment Delay Delay Settings: Bypass: On/Off, delay enable/disable Delay: 0 to 2000 ms, delay time Automixer/Gate/Ducker: AMIX: Automixer (Automatic Microphone Mixer) Automixer Settings: Bypass: On/Off, automixer enable/ disable Threshold: -60 to 0 db, gate threshold Attenuation: -40.0 to 0.0 db, gate attenuation Attack: 0.1 to 50.0 ms, attack time Release: 10 to 500 ms, release time Hold: 0.1 to 20.0 s, hold time Nom. Gain: On/Off, NOM attenuation enable/disable Logic Out: Gate open (mic on) indicator VU: -60 to 0 db, post-gate level meter Last Mic. (global): None, Ch 1 12, or Last; selects which analog input channel s gate remains open (mic on) when all input signals are below threshold Nom. Limit (global): 1-10, maximum NOM (Number of Open Mics) GATE: Noise Gate Gate Settings: Bypass: On/Off, gate enable/disable Threshold: -60 to 0 db, gate threshold Attenuation: -40.0 to 0.0 db, gate attenuation Attack: 0.1 to 50.0 ms, attack time Release: 10 to 500 ms, release time Logic Out: Gate open (channel on) indicator VU: -60 to 0 db, post-gate level meter DUCKER: Ducker Ducker Settings: Bypass: On/Off, ducker enable/disable Threshold: -60 to 0 db, ducking threshold Attenuation: -40.0 to 0.0 db, ducking attenuation Attack: 0.1 to 50.0 ms, attack time Release: 10 to 500 ms, release time Sense Select: Ref 1 2, reference signal bus Input Level: -60 to 0 db, input level Sense Level: -60 to 0 db, sense level Logic Out: Ducking active indicator Out: -60 to 0 db, post-ducking level meter Duck: -60 to 0 db, reference signal level meter
Output Level: LEVEL: Output Level Control Output Level Settings: Mute: ON/OFF, output mute enable/disable FS Out: 0, 6, 12, 18, or 24 db, analog output gain Level: -80 to +10 db, output level VU: -60 to 0 db, output level meter (pre-dac & FS Out Gain) Communications Ethernet: 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, SSH, SFTP (SSH File Transfer Protocol) Dante: Dedicated 1000 Mbps primary and secondary Dante network ports USB Device: USB device port for computer console (setup) Connectors MIC/LINE INPUTS 1 12: (12) 3-pin 3.5 mm detachable terminal blocks; Balanced microphone/line-level audio inputs; Input Level: +24 dbu maximum; Gain Range: 66 db; Input Impedance: 10k Ohms balanced; Phantom Power: +48 Volts DC, 12 ma, software enabled/disabled per channel LINE OUTPUTS 1 8: (8) 3-pin 3.5 mm detachable terminal blocks; Balanced/unbalanced line-level audio outputs; Output Level: +24 dbu maximum; Output Impedance: 150 Ohms balanced DANTE, PRI: (1) 8-pin RJ45 female; 1000Base-T Primary Dante network port DANTE, SEC: (1) 8-pin RJ45 female; 1000Base-T Secondary Dante network port LAN: (1) 8-pin RJ45 female; 10Base-T/100Base-TX/1000Base-T Ethernet LAN port 100-240V~1.8A 50/60 Hz: (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included G: (1) 6-32 screw, chassis ground lug COMPUTER (front): (USB Type B female; USB computer console port (for setup only) Controls & Indicators PWR: (1) Bi-color green/amber LED, indicates operating power supplied from AC line power, turns amber while booting and green when operating, alternates colors if no network connection RESET: (1) Recessed pushbutton, restores last saved settings MIC/LINE INPUTS 1 12: (12) 5-segment LED bar graph audio level meters for each corresponding input; each contains (4) blue LEDs for -40, -30, -20, and -10 dbfs, and (1) red LED for CLIP (-2 dbfs) LINE OUTPUTS 1 8: (8) 5-segment LED bar graph audio level meters for each corresponding output; each contains (4) blue LEDs for -40, -30, -20, and -10 dbfs, and (1) red LED for CLIP (-2 dbfs) DANTE, PRI (rear): (2) Bi-color green/amber LEDs, indicate primary Dante network activity and link status DANTE, SEC (rear): (2) Bi-color green/amber indicate secondary Dante network activity and link status LAN (rear): (2) Bi-color green/amber LEDs, indicate Ethernet activity and link status SETUP (rear): (1) Red LED and (1) pushbutton for Ethernet setup Power Requirements Main Power: 1.8 Amps @ 100-240 Volts AC, 50/60 Hz Power Consumption: 30 Watts typical Environmental Temperature: 41 to 104 F (5 to 40 C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: 102 BTU/hr Ambient Noise Level: 30 dba Enclosure Chassis: Metal, fan-cooled, vented sides Front Panel: Metal, black finish with polycarbonate label overlay Mounting: Freestanding or 1 RU 19-inch rack-mountable (adhesive feet and rack ears included) Dimensions Height: 1.72 in (44 cm) without feet Width: 17.28 in (439 mm); 19.00 in (483 mm) with rack ears Depth: 14.35 in (365 mm) Weight 9.2 lb (4.1 kg) MODELS & ACCESSORIES Available Models DSP-1281: w/dante Available Accessories AMP-8000 Series: Avia Power Amplifiers
Notes: 1. Crestron control system, touch screens, keypads, Crestron Fusion, and custom programming are sold separately. A control system is typically required for any installation that includes end-user or of presets, automated interaction with other equipment, and/or monitoring via Crestron Fusion. 2. Dante inputs and outputs are fully routable via the matrix mixer but do not include channels strips. A channel strip may be added to any Dante input or output by routing the signal through any of the eight auxiliary buses via the matrix mixer. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041. Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource. Crestron, the Crestron logo, Avia, Crestron Control, Crestron Fusion, Crestron RL, DigitalMedia, DM, Rava, Saros, Smart Graphics, and SmartObject are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dante and the Dante logo are either trademarks or registered trademarks of Audinate Pty Ltd. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. 2016 Crestron Electronics, Inc. The specific patents that cover Crestron products are listed online at: patents.crestron.com. DIMENSIONAL DIAGRAM Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 800.237.2041 / 201.767.3400 Fax: 201.767.1903 www.crestron.com All brand names, product names and trademarks are the property of their respective owners. 2016 Crestron Electronics, Inc. Specifications subject to change without notice. Revised 08/15/16