Kitchen Visuals Plot 4 R3.70 MATT TOPO LAMINATE & R3.10 MATT MOUSSE LAMINATE - INTEGRATED HANDLE KRION WORKTOP PEARL (12MM)
Kitchen Plans Plot 4 1. 600mm Tower Unit Int. Fridge / Int. Freezer / Door (RH) 2. 600mm Tower Unit Oven & Microwave / Doors (RH) 3. 600mm Front Door for Integrated Dishwasher (NA) 4. 900mm Base Unit Sink / 2 Doors (NA) 5. 600mm Base Unit 2 deep Drawers (NA) 6. 1250mm Base Corner Unit Shelf / 600mm Door (RH) 7. 900mm Base Unit HOB / 3 Drawers with cutlery Tray (NA) 8. 1000mm Base Unit Shelf / 2 Doors (NA) 9. 900mm Wall Unit Shelf / 2 Doors (NA) 10. 900mm Wall Unit Shelf / 2 Doors (NA) 11. 600mm Wall Unit Shelf / Door (LH) 12. 600mm Wall Unit Shelf / Door (RH) 13. 900mm Wall Unit Extractor / 2 Doors (NA) / Flat Pack* 14. 450mm Wall Unit Shelf / Door (RH) 100mm Stainless Steel Plinths 1. 2. 3. 4. 5. 8. 7. 6. 11. 12. 13. 14. * Flat Pack service: Served without self-assembling system, for built-in gluing 9. 10. **Please take note of Dimensions**
NEFF Appliances NEFF Induction Hob T56UB50X0 NEFF Double Oven U1ACE2HN0B NEFF Built-in Fridge KI1212F30G NEFF Built-in Freezer GI1113F30 NEFF Canopy Extractor D5625X0GB NEFF Dishwasher S511A50X1G Blanco Subline 350/350 Silgranit White Undermount Sink & Arti Tap Pack UND 8540+WH
FINISHES R3.70 Matt Topo Laminate & R3.10 Matt Mousse Laminate (wall units) Laminate finishes. Flat surface with laminate finish in both faces. Four PP edged pieces the same colour as the front. Joined to the edge by laser melting. Particleboard substrate. Integrated handle in the door edge. Niebla carcass Finish WALL UNITS: the front door is 2 cm longer than the carcass. Door edge without machining. KRION PEARL WORKTOP (12mm) Shark-nose edge BRAZILIA KRION is a new generation solid surface developed by SYSTEMPOOL, a company that belongs to the Porcelanosa Group. It is a material that is warm to the touch and similar to natural stone. It is made of two-thirds natural minerals (ATH aluminium trihydride) and a low percentage of high-resistance resins. This composition gives KRION a number of exclusive features: it does not have any pores, it is anti-bacterial without any type of additive, it is hard-wearing, highly resistant and easy to repair, only requires minimum maintenance and is easy to clean.
Specifications & assembly process 16mm-thick water-resistant particleboard carcass, laminated with a decorative overlay in a smooth Niebla or Zinc finish. These particleboards are certified with the FSC forest stewardship label and CARB2 label (the lowest formaldehyde emissions). All the edges of the carcasses and shelves are faced with 1mm-thick ABS edging tape, bonded with PUR adhesive with an extra high resistance to impacts and high temperatures. Back panel made of 8mm particleboard (in the same finish as the carcass), inserted into the vertical and horizontal grooves of the carcass and glued in place. The different sections of the carcass are assembled using hard wood dowl pins and glued at the same time as the back panel, using different presses. This guarantees full stability. The hinges are 100% metal, adjustable in 3 dimensions. They have an opening angle that ranges from 110º to 165º, depending on the type of unit, and a soft-close system. Thanks to the hinges clip mechanism, the doors can easily be mounted or removed without tools. The legs of the unit are made of solid compact material for extra rigidity and resistance. The bases of the legs are mounted in such a way that the weight of the units and countertops (particularly granite ones) is evenly distributed between the sides and the base, thus preventing the units from gradually collapsing. The legs can be adjusted from -15 to +25 mm. The shelf supports are made of resistant material and include an anti-tip mechanism. The height of the shelves can be adjusted using the holes in the side panels. The drawers and deep drawers, with their cutting-edge design, are dark grey coloured. They are equipped with full-extension Nova Pro Scala drawer system from Grass, so that the front panel can be taken off without tools and adjusted 3 dimensionally. All the drawers and deep drawers feature a soft-close mechanism. A wide range of optional accessories and organizers made of wood or plastic are available for use inside the drawers and deep drawers. Concealed behind the back panel, the fastening system of the wall units is designed to distribute the weight between the top and sides. The units can be adjusted from the inside. The doors can be: 19mm-thick laminated or HPL finish doors with ABS edging tape or laser edging. The soft-formed edges have been machined to the required shape and then wrapped with a single-layer edging band, using highresistance PUR adhesive. With laser edging, a more long-lasting bond is ensured, the joints are almost invisible, and because no glues or cleaning solvents are used, the environmental impact is much lower.
Terms and Conditions A minimum of 20% deposit is required to secure a kitchen order. (If purchasing other items ie. Bathrooms or tiles this deposit must be taken separately) Kitchen Units are SPECIAL ORDER items and as such are non refundable. Any addition or modification to a confirmed order, will be considered as a new order as regards the conditions of sale and the delivery time. If a Kitchen Design has been calculated and ordered based on plans provided by the client, Porcelanosa cannot accept responsibility for any issues that may arise as a result of incorrect measurements. It is the clients responsibility to ensure that the dimensions meet the specification on the plan/s. Delivery times for kitchens from order confirmation: Range Door Type Approximate Timescale Residence R1.00-R4.00 & Emotions E1.00-E3.00 Matt / Gloss Laminate 8-9 weeks Emotions E4.00-E5.00 Matt / Gloss Lacquer 10-11 weeks Emotions E4.40 E6.00 E7.00 Shaker / Veneer 12-13 weeks In the event that extras or replacements are required they may be subject to the following timescales: Replacements: from 7 to 15 working days (this will depend on the items size and weight as to how we can transport it) All kitchens must be surveyed by the nominated installer before any order can be placed.
Natalia Martinez Kitchen Sales Designer Tel: 07815200428 Email: natalia.martinez@porcelanosa.co.uk Porcelanosa Western Ltd Lysander Road Cribbs Causeway Westbury on Trym Bristol BS10 7TY Tel: 01179 597150 Fax:01179 597155