RF Conducted Immunity and Automotive Transient Generator Test Systems

August 2008 RF Conducted Immunity and Automotive Transient Generator Test Systems rf/microwave instrumentation 1

This Will Get Your Pulse Going at whatever rate you need! DUT Coupling Network TGA20000 Load Box TG6000CC Capacitive Coupling Clamp used on TT6142 Wooden Test Table Emergency Shut-Off Button System Control Software DUT Coupling Network TGAR Transient Generator Systems If you have to deal with the diverse and ever-changing specifications for testing automotive conducted immunity, here s something that will really get your pulse racing: The TGAR Transient Generator Systems easily adapts to changing specs. TG6000CC Capacitive Coupling Clamp used on TT6142 Wooden Test Table TGAR Eliminates Traditional Transient Test Set-Up Problems Test set-ups for transient testing have always been difficult and time-consuming. One of the biggest challenges was that most transient tests require a separate set-up. That's no small feature, when you consider that each standard has from 5 to 30 transients that need to be performed. TGAR can generate all these transients so there's no need to move the DUT to different test stations. With TGAR, testing can be continuous, test reports are generated automatically, and the entire process is streamlined. A fully integrated system, TGAR includes a complete software package, including pulse verifications. TGA20000 Load Box System Control Software Model TG6100

The Transient Generator Systems With Built-In Flexibility and all the features for easy, accurate automotive transient immunity testing. TGAR enables you to customize pulses, so when specs change, it s simple to keep up. You ll probably never need another transient generator system. And you ll never find one with all these great features: The design is intuitive and user-friendly Onboard oscilloscope makes pulse verification and self-calibration much simpler LabView-based software and built-in arbitrary waveform generators allow users to create custom waveforms All system control software included Software enables easy communication with data acquisition systems Software upgrades can be handled via the website with no need for hardware upgrades System includes built-in auxiliary power supply, embedded oscilloscope, inductive and fast transient generators, load dump power supply, terminations, loads, embedded computer, keyboard, and LCD monitor Standard changes can be accommodated with flexible software Pulse verification and system calibration data are included automatically in the DUT test report Fully integrated system allows centralized testing with one convenient connection to the DUT System is designed and built to be tough and rugged; and can be shipped without fear of damage Two TGAR Models Performs testing for ISO 7637-2, SAE J1113-11, Ford ES-XW7T, DC-10614, DC-10615, GMW3097, Toyota, JASO, BMW, VW, and many other international and manufacturer standards. TG6032-60V/32 Amps for up to 32 Amp DUT s TG6100-60V/100 Amps for up to 100 Amp DUT s Accessories for TGAR Systems Model RT6000 Relay Transient Generator for the Ford ESXW7T-1A278 Rev. AC standard. Included pulses are Ford CI-220 A1, A2, B1, B2, C and CI-260F. The box has been designed for use with the TGAR systems, but can be used separately with 2 programmable power supplies and the correct timing sequences. Model TG6000CC Capacitive Coupling Clamp for electrical fast transients for I/O lines as defined in ISO 7637-3. Model TT6142 Wooden Test Table with built-in horizontal coupling plane for testing electronic equipment per IEC 61000-4-2. The TGAR Systems were designed to allow the DUT coupling network to line up with the TT6142 test table. Line Impedance Stabilization Networks IN10000 Series 100 khz 100 MHz, ISO 7637-1 and ISO 7637-2 IN20000 Series 10 khz 10 MHz, MIL-STD 461D & E IN3000 Series 100 khz 108 MHz, CISPR25 These accessories are compatible with the CI systems as well. To see web demonstration detailing capabilities and hardware overview of TGAR, visit our website at www.ar-worldwide.com. Model TG6032 Model TG6032 60V/32 Amps TG6032BU - Base Unit Specifications The base unit serves as the hub of the system and is the starting block that allows a limited number of tests in a stand-alone configuration and can be expanded with the addition of the other TGAR components. Pulse 1 and 2a Inductive Pulses per ISO7637-2 (2004) Open circuit voltage U = 20V 600V ±10% (Peak voltage and polarity depending on selected standard) ISO Pulse 1 (12V) Pulse duration td (10-10%) 2ms ±10% Internal resistor 10Ω ±10% ISO Pulse 1 (24V) Rise time tr (10-90%) 3µs + 0% // - 50% Pulse duration td (10-10%) 1ms ±10% Internal resistor 50Ω ±10% ISO Pulse 2 (12V/24V) Pulse duration td (10-10%) 50µs ±10% Internal resistor 2Ω ±10% s +/- output Central DUT output Coupling To the battery +line Decoupling Via and battery supply switch Pulse 3a/3b (EFT) per ISO7637-2 (2004) EFT 20V 1,000V ±10% Wave shape 5/100ns Verification As per Annex D of ISO 7637-2 on a 50Ω and a 1,000Ω load Source impedance Zq = 50Ω Polarity Pulse 3b positive and pulse 3a negative s Direct Via 50Ω-coaxial connector TG6032PS This is a programmable power supply that provides the DUT with the operating voltage up to 60 Volts at 32 Amps. This simulator will supply the following pulses for the ISO7637-2 (2004): Pulse 2b and pulse 4 (starting pulse). Programmable Supply for pulses 2b and 4 per ISO7637-2 (2004) Peak Current 0 60 V 32 Amps continuous 70 Amps peak (500 ms) Through the TG6032 coupling network TG6000LD This generator performs the Load Dump test per ISO 7637-2 Pulse 5a/5b. This simulator performs other specifications requiring high-energy pulses as well. Open circuit voltages up to 200 Volts are possible along with Pulse Durations up to 400 ms. High energy pulse generator (Pulse 5a, 5b) per ISO 7637-2 (2004) 200V - 200V +/- 10% Rise time (10-90%) 5 10 ms Pulse duration (10-10%) 50 400 ms Source impedances 0.5, 1, 2, and 10Ω Repetition rate 45 seconds TG6032AS This generator supplies the voltage required to perform voltage dip testing and can be used as an independent power supply to power auxiliary equipment. Voltage dip testing generator per various manufacturer standards Variable up to 16 Volts Up to 30 Amps Through the TG6032 coupling network Model TG6100 60V/100 Amps TG6100BU - Base Unit Specifications The base unit serves as the hub of the system and is the starting block that allows a limited number of tests in a stand-alone configuration and can be expanded with the addition of the other TGAR components. Pulse 1 and 2a Inductive Pulses per ISO7637-2 (2004) Open circuit voltage U = 20V 600V ±10% (Peak voltage and polarity depending on selected standard) ISO Pulse 1 (12V) Pulse duration td (10-10%) 2ms ±10% Internal resistor 10Ω ±10% ISO Pulse 1 (24V) Rise time tr (10-90%) 3µs + 0% // - 50% Pulse duration td (10-10%) 1ms ±10% Internal resistor 50Ω ±10% ISO Pulse 2 (12V/24V) Pulse duration td (10-10%) 50µs ±10% Internal resistor 2Ω ±10% s +/- output Central DUT output Coupling To the battery +line Decoupling Via and battery supply switch Pulse 3a/3b (EFT) per ISO7637-2 (2004) EFT 20V 1,000V ±10% Wave shape 5/100ns Verification As per Annex D of ISO 7637-2 on a 50Ω and a 1,000Ω load Source impedance Zq = 50Ω Polarity Pulse 3b positive and pulse 3a negative s Direct Via 50Ω-coaxial connector TG6100PS This is a programmable power supply that provides the DUT with the operating voltage up to 60 Volts at 100 Amps. This simulator will supply the following pulses for the ISO7637-2 (2004): Pulse 2b and pulse 4 (starting pulse). Programmable Supply for pulses 2b and 4 per ISO7637-2 (2004) 0 60 V 100 Amps continuous Peak current 150 Amps (500 ms) Through the TG6100 coupling network TG6000LD This generator performs the Load Dump test per ISO 7637-2 Pulse 5a / 5b. This simulator performs other specifications requiring high-energy pulses as well. Open circuit voltages up to 200 Volts are possible along with Pulse Durations up to 400 ms. High energy pulse generator (Pulse 5a, 5b) per ISO 7637-2 (2004) 20V 200 V ±10% Rise time (10-90%) 5 10 ms Pulse duration (10-10%) 50 400 ms Source impedances 0.5, 1, 2, and 10Ω Repetition rate 45 seconds TG6100AS This generator supplies the voltage required to perform voltage dip testing and can be used as an independent power supply to power auxiliary equipment. Voltage dip testing generator per ISO7637-2 (2004) Variable up to 22 Volts Up to 36 Amps Through the TG6100 coupling network

For Quicker, Easier, More Cost-Efficient RF Conducted Immunity Testing, We ve Got The Whole Package. The all-in-one Conducted Immunity Test Systems from AR take a time-consuming, complicated procedure and makes it easy! Everything is simplified - calibrating, testing, DUT troubleshooting, and reporting. And if you ever need to add power, increase the frequency range or add external devices, that s simple too. The CI Systems have built in flexibility with the versatility needed for every test laboratory and equipment manufacturer. These remarkable systems also have a higher level of accuracy, a wider sensitivity range, excellent speed, and the ability to do accurate margin testing. The CI Systems make it easy to conduct customized tests, and reports are generated directly into Microsoft Word or Excel. When You Get The System, You Get Much More. The system is made up of AR components, including a state-of-the-art AR amplifier, power meter and signal generator, which can be used independently. So you get a stand-alone amplifier and signal generator as part of the package. Model CI00250 (75 Watts, 10 khz - 250 MHz) - Provides complete testing solutions to the following standards: EN/IEC 61000-4-6, EN-50130-4, EN 61000-6-1/2, EN 55024 and IEC 60601-1-2 for medical devices where greater accuracy is necessary. Model CI00400 (100 Watts, 10 khz - 400 MHz) - Designed to test to MIL-STD-461D & E CS114, DO160D & E, EN/IEC 61000-4-6, IEC 60601-1-2, EN 501304, EN 61000-6-1/2 and EN 550204 standards. Model CI00401 (100 Watts, 10 khz - 400 MHz) - Provides complete testing solutions to the following standards: ISO 11452-4, GMW3097, ES-XW7T-1A278-AC, DC-11224, BMW GS95002, and other automotive standards. Model CI00250 Accessory Kits Our accessory kits include attenuators, injection probes, monitor probes, calibration fixtures, calibration resistors, and termination resistors necessary to perform BCI testing to various specifications. All of our accessories are also sold separately. Model TK1000 Used for IEC applications with Model CI00250 Model TK2000 Used for MIL/DO160 applications with Model CI00400 Model TK3000 Used for automotive applications with Model CI00401 CI00250-75 Watt, 10 khz 250 MHz Complete Testing Solutions to the following standards: EN/IEC 61000-4-6, IEC 60601-1-2, EN 50130-4, EN 61000-6-1/2, EN 55024 IEC/EN 60601-1-2 IEC/EN 50130-4 IEC/EN 61326 IEC/EN 61000-6-1 IEC/EN 61000-6-2 CISPR 24/EN 55024 range Meter Specifications Channels 2 heads 1 rating Harmonic Distortion Signal Generator out Amplifier In In AM, FSK. Pulse, FM, Phase, External Pulse 10 khz 250 MHz 75 Watts Min. 50 Watts Min. -20dBc at 50 Watts 49 db min. Dimensions 20.5 kg (45 lb) Screen Resolution 1024 x 768 USB to included (NI GPIB-USB-HS) 1 Directional coupler and additional power head to level on and monitor forward power 2 Additional power meter and power head to add the ability to monitor reverse power 3 Data acquisition card 4 Laptop PC with software preinstalled CI00400-100 Watt, 10 khz 400 MHz Complete Testing Solutions to the following standards: MIL-STD-461D & E CS114, DO160D & E, EN/IEC 61000-4-6, IEC 60601-1-2, EN 50130-4, EN 61000-6-1/2, EN 55024 MIL-STD-461D MIL-STD-461E DO160D DO160E IEC/EN 60601-1-2 IEC/EN 50130-4 IEC/EN 61326 IEC/EN 61000-6-1 IEC/EN 61000-6-2 CISPR 24/EN 55024 range Meter Specifications** Channels 2 heads 2 rating Harmonic distortion Signal generator out Amplifier out/in Pulse In Directional Coupler In CS114 CS114 Section 20 BCI testing Section 20 BCI testing AM, FSK. Pulse, FM, Phase, External Pulse 10 khz 400 MHz 100 Watts nominal 75 Watts nominal -20 dbc at 50 Watts 51dB min. Dimensions, 22.7 kg (50 lb) Screen 1024 x 768 USB to included (NI GPIB-USB-HS) 1 Additional power meter and power head to add the ability to monitor reverse power 2 Data acquisition card 3 Laptop PC with software preinstalled CI00401-100 Watt, 10 khz 400 MHz Complete Testing Solutions to the following standards: ISO 11452-4, GMW3097, ES-XW7T-1A278-AC, DC-H224, BMW GS95002, and other automotive standards. ISO 11452-4 GMW 3097 ES-XW7T-1A278-AC DC-H224 BMW GS95002 Other automotive standards range Meter Specifications heads 3 rating Harmonic Distortion Signal Generator Out Directional Coupler In Amplifier out/in Pulse In Dimensions 22.7 kg (50 lb) Screen Resolution 1024 x 768 USB to included (NI GPIB-USB-HS) 1 Data acquisition card 2 Laptop PC with software preinstalled 10 khz 400 MHz 100 Watts Nominal 75 Watts Nominal -20 dbc at 50 Watts 51dB Min. * Specifications can be met using AR-specified external accessories (injection probes, monitor probes, cal fixtures, CDN s, attenuators, etc.) ** The use of a spectrum analyzer may be necessary on some of the low level bulk current injection tests. This is especially true on power and I/O lines with a great amount of ambient noise. AM, FSK. FM, Phase, External Pulse

AR Competitive Edge. At AR, there s no substitute for quality. It s the foundation of our business and the AR value that s recognized around the globe. It s one of the key reasons AR has become the worldwide leader in EMC, Wireless and beyond. AR products do more, last longer, work harder and make your job easier. And that gives you a fierce competitive edge. Only AR delivers innovative technology, advanced design, quality build & workmanship, mismatch capability, durability & longevity, less cost watt for watt, and a worldwide support network that s here for you today and tomorrow. With the combined resources of all the AR companies, we simply have more of the best people making the best products to overcome your toughest challenges. ar RF/Microwave Instrumentation RF Amplifiers 1 to 10,000 Watts, dc to 1 GHz Microwave Amplifiers 1 to 16,000 Watts, 0.8 to 45 GHz Antennas 1 to 15,000 Watts, 10 khz to 50 GHz Transient Generators Pre-Compliance Test Systems Accessories and Software ar Modular RF RF Amplifiers and Modules Broadband and Sub-band Solid State RF Amplifiers Booster Amplifiers for Tactical Military Radios ar Receiver Systems A line of products for EMC Testing including: EMI Receivers Impulse Generators and Measurement Systems Leak Detectors AR Receiver Systems products can be purchased through AR RF/Microwave Instrumentation ar Europe Offering a complete line of RF Products and testing solutions for the European Market Want to know more about AR? Need help with any RF solutions or testing procedures? Here s how to reach AR and get all the help you need: www.ar-worldwide.com ar RF/Microwave Instrumentation 160 School House Road, Souderton, PA 18964-9990 USA Tel 215-723-8181 For RF Amplifier modules, contact: ar Modular RF 11807 North Creek Parkway South, Suite 109, Bothell, Washington 98011 USA Tel 425-485-9000 Fax 425-486-9657 For receiver systems, contact: ar Receiver Systems Tel 800-933-8181 AR RF/Microwave Instrumentation is ISO Certified. * ISO 9001:2000 Certified ar Global Promise The AR warranty is more than just a warranty, it s a promise, backed by a knowledgeable support team that s always there for you to help solve any problems and answer any questions, today and tomorrow. AR warrants its amplifiers (all parts excluding traveling wave and vacuum tubes), antennas, pre-compliance test systems, transient generators, power meters, field monitoring equipment, conducted immunity generators, signal generators, couplers and tripods to be free of defects in materials and workmanship for a period of three years from date of shipment. Traveling wave tubes on the following amplifier models 200T1G3A, 200T2G8A, 200T8G18A, 250T1G3, 250T8G18 carry a two-year warranty. Vacuum tubes on our L series amplifiers and other traveling-wave tubes as well as powerheads carry a one-year warranty. *ISO9001-2000 certification applies to AR RF/Microwave Instrumentation, not to AR Modular RF & AR Receiver Systems. rf/microwave instrumentation modular rf receiver systems ar europe Copyright 2008 AR