MOVENTO WITH BLUMOTION - 760H/766H MOVENTO WITH BLUMOTION Space Requirement Concealed full extension with integrated BLUMOTION for silent and effortless closing action Synchronised feather-light glide BLUMTIC self closing feature Tool-free side, height, and tilt adjustment Optional tool-free depth adjustment Built-in width and depth tolerance compensation NL - Nominal Length 1. Runners Left/Right 40kg Nominal Length Blum No Code Blum No Code 270 760H2700B 1-225-270 300 760H3000B 1-225-300 350 760H3500B 1-225-350 400 760H4000B 1-225-400 450 760H4500B 1-225-450 766H4500B 1-225-456 500 760H5000B 1-225-500 766H5000B 1-225-506 550 760H5500B 1-225-550 766H5500B 1-225-556 600 776H6000B 1-225-606 3. Locking Device with Side djustment Side Blum No Code Left T51.7601 - L 1-225-555 Right T51.7601 - R 1-225-560 4. Depth djustment Nylon 298.7600 1-225-005 60kg 12. Side Stabilisation Set For cutting to size, suitable for cabinet width KB 1400mm Cutting = Inner cabinet width LW - 295mm Description Blum No Code Up to 400NL ZS7.400MU 1-255-010 Up to 600NL ZS7.600MU 1-255-012.170 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification
MOVENTO WITH BLUMOTION - 760H/766H Planning Space requirement in cabinet See cabinet profile fixing positions Drawer/inner drawer SKW Internal drawer width LW Inner cabinet width Drawer SKL Drawer length NL Nominal length dditional +12mm with side stabilisation Inner drawer ISKL Inner drawer length SKL Drawer length NL Nominal length dditional +3mm with depth adjustment Page Instructions Cabinet profile screw positions Cabinet profile 760H - 40kg Nominal length NL (mm) 250, 270 300-350 390-520 550, 600 Drawer assembly Use drilling template 1-285-691 Cabinet profile screw positions Cabinet profile 766H - 60kg Nominal length NL (mm) 450 500-600 650-750 Use drilling template 1-285-691 Note: ** Limited side adjustment for a drawer side panel thickness of 16mm. ssembly Devices ccessories.174 D ssembly, Removal & djustment.176 SERVO-DRIVE for MOVENTO.178 Blum Warranty.0 LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.171.2
MOVENTO WITH TIP-ON - 760H/766H TIP-ON MOVENTO WITH TIP-ON Concealed full extension with integrated TIP-ON, the mechanical opening support system Synchronised feather-light glide BLUMTIC self closing feature Tool-free side, height, and tilt adjustment Optional tool-free depth adjustment Built-in width and depth tolerance compensation Compatible with side stabilisation for MOVENTO Space Requirement NL - Nominal Length TIP-ON 1. Runners Left/Right 40kg Nominal Length Blum No Code Blum No Code 270 760H2700T 1-225-271 300 760H3000T 1-225-301 350 760H3500T 1-225-351 400 760H4000T 1-225-401 450 760H4500T 1-225-451 766H4500T 1-225-457 500 760H5000T 1-225-501 766H5000T 1-225-507 550 760H5500T 1-225-551 766H5500T 1-225-557 600 776H6000T 1-225-607 3. Locking Device with Side djustment Side Blum No Code Left T51.7601 - L 1-225-555 Right T51.7601 - R 1-225-560 6b. TIP-ON Syncronisation pinion set Nylon T57.7400 1-225-007 6c. TIP-ON Syncronisation Linkage luminium ZST.1137W 1-255-009 60kg Drawer Trigger range Example for 760H, nominal length NL 500 mm, four sided drawer, with synchronisation.172 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification
MOVENTO WITH TIP-ON - 760H/766H Planning Space requirement in cabinet See cabinet profile fixing positions Drawer/inner drawer SKW Internal drawer width LW Inner cabinet width Drawer SKL Drawer length NL Nominal length dditional +12mm with side stabilisation Inner drawer ISKL Inner drawer length SKL Drawer length NL Nominal length dditional +3mm with depth adjustment Page Instructions Cabinet profile screw positions Cabinet profile 760H - 40kg Nominal length NL (mm) 250, 270 300-350 390-520 550, 600 Drawer assembly Use drilling template 1-285-691 Cabinet profile screw positions Cabinet profile 766H - 60kg Nominal length NL (mm) 450 500-600 650-750 Use drilling template 1-285-691 Note: ** Limited side adjustment for a drawer side panel thickness of 16mm. ssembly Devices ccessories.174 D ssembly, Removal & djustment.176 Blum Warranty.0 LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.173.2
MOVENTO CCESSORIES DEPTH DJUSTMENT Only for inset applications Integrated SERVO-DRIVE bumper Suitable for MOVENTO locking device Nylon - light grey 298.7600 1-225-005 ssembly Space requirement in cabinet Four sided drawer Three sided drawer SIDE STBILISTION SET Can be combined with MOVENTO with BLUMOTION and MOVENTO with TIP-ON For cutting to size Suitable for cabinet width KB 1400 mm 75 Depth adjustment ±2mm Description Blum No Code Up to 400NL ZS7.400MU 1-255-010 Up to 600NL ZS7.600MU 1-255-012 Planning Space requirement in cabinet See cabinet profile fixing positions Drawer SKL Drawer length NL Nominal length dditional +12mm with side stabilisation.174 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification
MOVENTO CBINET PROFILE FIXING POSITIONS Cabinet profile 760H - 40 kg Cabinet profile 766H - 60 kg Fixing onto cabinet Chipboard screws Ø 3.5 x 15 mm, part no. 609.1500 B Chipboard screws, part no. 661.1450.HG Extreme back fixing position ensures optimal stability Cabinet assembly Fixing onto cabinet Chipboard screws Ø 3.5 x 15 mm, part no. 609.1500 B Chipboard screws, part no. 661.1450.HG Extreme back fixing position ensures optimal stability If you install runners before cabinet assembly, the fixing position must be increased by at least 1 mm from 38 to at least 39 mm due to tolerances in the runner and cabinet! LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.175.2
Drawer Systems MOVENTO - SSEMBLY, REMOVL & DJUSTMENT Locking device Four sided drawer Three sided drawer Inner drawer djustment Limited side adjustment for a drawer side panel thickness of 16 mm, but with full tolerance utilisation of the internal width of the drawer Side adjustment Two-sided via locking device ± 1.5 mm Side adjustment Compensation via the right, back runner djustment Height adjustment + 3 mm Tilt adjustment Depth adjustment With depth adjustment 298.7600 ± 2 mm Drawer insertion and removal Insertion.176 DRWERS, HINGES & SSEMBLY DEVICES Removal Dimension data and specifications may change without notification Depth adjustment With TIP-ON - 1/+ 2 mm
SERVO-DRIVE for MOVENTO Open with a single touch The electric motion support system from Blum, SERVO-DRIVE, is mesmerisingly easy. Drawers open by themselves with a single touch and close again softly and effortlessly with BLUMOTION. Combined with MOVENTO, motion is smooth and effortless. Low-friction nylon rollers in the roller carriage and the synchronisation of the drawer profile and roller carriage ensure synchronised, smooth running action. With MOVENTO the front can now be adjusted to the side and depth along with the height and tilt. Fast, easy and tool-free.
SERVO-DRIVE FOR MOVENTO/TNDEM STNDRD CBINET Electrical opening support system in conjunction with BLUMOTION for silent and effortless closing action With vertical bracket profile No fixed connection to the drive system Pull-outs can be used unchanged Tool-free assembly Simple cabling Shallow installation depth 1a. Blum Distance Bumper Diameter Blum No Code Ø 5 mm 993.0530 1-244-009 2. Bracket Profile Length Cable Blum No Code 670mm With Z10T670 1-244-067 750mm With Z10T750 1-244-075 1170mm Without Z10T1170 1-244-070 3a. Profile ttachment Top/Bottom Material Colour Blum No Code Nylon Light Grey RL 7037 Z10D01E0.01 1-244-012 12. Connecting Node & Cable End Protector Material Colour Blum No Code Nylon Black/Orange Z10V100E.01 1-244-079 13. SERVO-DRIVE Transformer Description Blum No Code 72W/240V Z10NE050.01 1-244-050 14. Cable & Plug Description Blum No Code ustralian Plug Z10M200K 1-244-051 15a. Transformer Base Housing Nylon Z10NG000 1-244-053 3b. Profile ttachment Bottom & Back Includes Back bracket cover cap Material Colour Blum No Code Nylon Light Grey RL 7037 Z10D01E.01 1-244-014 15b. Transformer Base Housing Nylon Z10NG120 1-244-055 9. Drive Unit Material Colour Blum No Code Nylon Light Grey RL 7037 Z103000.02 1-244-004 18. Syncronisation Cables Length Blum No Code 1600mm Z10K160S 1-244-024 1200mm Z10K120S 1-244-022 80mm Z10K008S 1-244-020 11. Distribution Cable & Cable End Protector Length Blum No Code 8m Z10K800E 1-244-080 19. Cable Holder For securing the distribution cable Nylon Z10K0009 1-244-007.178 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification
SERVO-DRIVE FOR MOVENTO/TNDEM Planning - horizontal cross member Drawer with overlay front X Y Z Drilling position NL + 16 mm Min. space requirement NL + 30 mm Distance from cabinet front edge to drilling 37mm * Distance from drawer to top panel Inner cabinet width LW 420 mm > 420 mm MOVENTO X (mm) 55 35 Y (mm) 88 68 TNDEM X (mm) 50 35 Y (mm) 71 68 Drilling distance base/cross bar MOVENTO Inner cabinet width LW 236-390 mm TNDEM Inner cabinet width LW 225-245 mm Planning - vertical cross member TNDEM Inner cabinet width LW 246-340 mm MOVENTO Inner cabinet width LW > 390 mm TNDEM Inner cabinet width LW > 340 mm X Y Z Drilling position NL + 16 mm Min. space requirement NL + 30 mm Distance from cabinet front edge to drilling 37mm * Distance from drawer to top panel Inner cabinet width LW 420 mm > 420 mm MOVENTO X (mm) Y (mm) 55 96 35 76 TNDEM X (mm) Y (mm) 50 91 35 76 Drilling distance base/cross bar MOVENTO Inner cabinet width LW 236-390 mm TNDEM Inner cabinet width LW 225-245 mm TNDEM Inner cabinet width LW 246-340 mm MOVENTO Inner cabinet width LW > 390 mm TNDEM Inner cabinet width LW > 340 mm LINCOLN SENTRY DRWERS, HINGES & SSEMBLY DEVICES.179.2
SERVO-DRIVE FOR MOVENTO/TNDEM Planning - horizontal & vertical cross member Front assembly - position of Blum distance bumper Drawer with overlay front KB LW LT NL Cabinet width Inner cabinet width Internal cabinet depth Nominal length SWS FS Side panel thickness Front thickness The Blum distance bumper creates and maintains the required trigger path of 2 mm F Front overlay FH Front height Lower cabling Back cabling Bracket profile cutting dimensions LH PL Internal cabinet height Bracket profile length.180 DRWERS, HINGES & SSEMBLY DEVICES Dimension data and specifications may change without notification
Organisation your way with ORG-LINE Blum s ORG-LINE solutions will help make sure everything has its place and can be easily found when you need it. ORG-LINE inner dividers and containers organise interiors ensuring clear visibility of all drawer contents. It includes solutions for drawers, pantry pull-outs and a range of accessories to further simplify your kitchen experience. The range also includes accessories such as film and foil dispensers, plus knife, plate and spice holders. ORG-LINE can enhance practicality throughout your home and is suitable for Blum TNDEMBOX intivo and TNDEMBOX antaro drawers and pantry pull-outs. The containers can be easily removed and are designed for dishwasher use.
Cabinet Hardware Catalogue mendments 7 - DRWER SYSTEMS - MOVENTO S OF 01 JULY 2014 Page Code Description of Issue ction New Code or Change mendment Date.172 dd TIP ON watermark dd watermark 01 July 2014 LINCOLN SENTRY CBINET HRDWRE CTLOGUE MENDMENTS