HasTec KGW 400 For surface protection and greening of slopes in landscaping and traffic route engineering. Surface covered with HasTec KGW 400. Fixing with nails of wood or steel (suggestion: 2-4 pieces per m2). Need of exact fixing in the overlapping areas and boundary areas for good foundation. Trench building on the slope crest for anchoring the fiber blanket. Suitable seeds be carried out by hand- or hydroseeding advantages: immediate surface protection with HasTec KGW 400 endures until the vegetation takes over stabilization development of a higher structural safety and reduction of soil loss coir fiber blankets are permeable to water and air installation possible all over the year usage: greening of slopes, erosion control, protection of vegetation, ski pistes, protection against wind and water erosion on low-angled areas
HasTec KGW 700 Protection of lake shorelines in mean water area or water basins with KGW 700. Fixing with nails of wood or steel (2-4 pieces per m2) or other utilizable stock wood. Placing geotextile on a berm to avoid slip hazard of the surface. Blanket endures until the vegetation takes over stabilization. Development of a higher structural safety and a reduction of soil loss. advantages: immediate shoreline protection vegetated shoreline residue-free biodegradable durability up to 5 years installation possible all over the year permeable to water permeable to air usage: water basins, storage reservoir, sedimentation tank, lake shore fixing, protection of mean water area and scour
PRODUCT PICTURES HasTec KGW 400 coir fiber: 400 g/m2 mesh: ca. 25-35 mm coverage percentage: ca 40-50% standard roll: 2,0 x 50,0 m HasTec KGW 700 coir fiber: 700 g/m2 mesh: ca. 15-20 mm coverage percentage: ca 60-70% standard roll: 2,0 x 50,0 m 4 HasTec KGW 900 coir fiber: 900 g/m2 mesh: ca. 10-15 mm coverage percentage: ca 70-80% standard roll: 2,0 x 50,0 m HasTec JG 500 jute textile: 500 g/m2 mesh: ca. 25-35 mm coverage percentage: ca 40-50% standard bale: 610 m2
GREENFIELDS FIBER BLANKET Sheeted blankets with straw, straw-coir or only coir fibers. PP net or jute textile are used as supporting material on both sides. After preparation of slope surface, suitable seeds be carried out by hand- or hydroseeding. Seeding before placing blankets. For surface protection of vulnerable areas. Fixing with nails of wood or steel (2-4 pieces per m2). Need of exact fixing in the overlapping and boundary areas for good foundation. Trench building on the slope crest for anchoring the fiber mat. advantages: immediate surface protection residue-free biodegradable durability up to 3 years installation possible all over the year permeable to water permeable to air usage: greening of embankments, erosion control on slopes, protection of vegetation, ski pistes, protection against wind and water erosion on low-angled areas
FIXING TOOLS Loose fixing on subsurface, without pressure on the surface shape of the erosion control blankets. Usage of 2 pieces per m2, more pieces required in case of rough basement. Erosion control blankets can be fixed with nails of wood. Need of exact fixing in the overlapping and boundary areas for good footing. Trench building on the slope crest for anchoring the erosion control blankets. Aquasol Nagel 40 construction steel 400/50 mm DN 8 mm box per 200 pieces Ökohaken 30 spring steel 300/45 mm DN 3,8 mm box per 500 pieces Buche Q30 wooden nail with transverse stick on the top 300/50 mm (inkl. Holzstift) box per 250 pieces Bionagel 2012 biodegradable synthetic material hollow stock with barbed hooks 200/25 mm DN 12 mm box per 1000 or 200 pieces
fixing grid for slopes up to 45 suggestion: 2-3 pieces per m2 fixing grid for slopes over 45 suggestion: 4-6 pieces per m2