HARTZELL PROPELLER INC. SERVICE BULLETIN

Similar documents
SERVICE BULLETIN TRANSMITTAL SHEET HC-SB De-ice - Wire Harness Replacement

SERVICE BULLETIN HC-SB De-ice - Wire Harness Replacement

SERVICE BULLETIN TRANSMITTAL SHEET HC-SB Propeller - Blade Seal Replacement

SERVICE BULLETIN HC-SB Propeller - Blade Seal

SERVICE BULLETIN TRANSMITTAL SHEET HC-SB De-ice - Wire Harness Replacement

SERVICE LETTER HC-SL Blade - Damage Evaluation for NC10245( ) Blades Installed on (but not limited to) Pilatus PC-12 aircraft

1625 North 1100 West SB Springville, UT SERVICE BULLETIN MANDATORY ACTION REQUIRED

Mandatory: shall be accomplished at the next scheduled 100 hour or annual/12 month type inspection, not to exceed 12 months, whichever occurs first.

Service Bulletin No: Ref No: 136 Modification No: INSPECTION ATA Chapter: 57

SERVICE BULLETIN SB-GL12-01R GREAT LAKES AIRCRAFT HORIZONTAL STABILIZER SPAR INSPECTION COMPLIANCE TIME: APPROVAL: PURPOSE: BACKGROUND:

P/N CABLE ASSEMBLY, ONE TIME INSPECTION FOR DEFECTIVE BODY, P/N PART I (Inspection): Within the next 25 flight hours

SERVICE BULLETIN. No. SB-AG-45 Rev. B JUNE 1, 2007 FIN SPAR & ATTACH FITTINGS INSPECTION AND UPGRADE IMPORTANT:

NMD Rev 1 2 August 1996 Page 1

*MANDATORY SERVICE BULLETIN*

Airworthiness Directive

SERVICE BULLETIN REVISION TRANSMITTAL

service bulletin WING SPAR INSPECTION AND FATIGUE LIFE EXTENSION

RADAR ALTIMETER CABLES, REPLACEMENT OF. HELICOPTERS AFFECTED: Serial numbers through

SERVICE BULLETIN. SERIAL NUMBERS thru A0001 thru 402A B0001 thru 401B thru

SERVICE BULLETIN TITLE FLIGHT CONTROLS - RUDDER AND ELEVATOR AUTOPILOT SERVO CABLE REPLACEMENT

SERVICE BULLETIN. SERIAL NUMBERS thru

Notification of a Proposal to issue an Airworthiness Directive

AIRWORTHINESS DIRECTIVE

Service Bulletin. Fuel Systems. Bulletin No.: PRS-103. Date: 05/12/98. SUBJECT: RSA-10 Fuel Diaphragm Assembly, Part Number

PLOW MOUNT KIT FOR CAN-AM COMMANDER P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or

MSP-DCCLFSD LCD Flat Screen Swing-Down Mount

CIRRUS SR22 SB 2X R3. Service Bulletin. Issued: Revised: October 13, 2009 May 18, 2010

PLOW MOUNT KIT FOR CAN-AM MAVERICK P/N ASSEMBLY / OWNERS MANUAL

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL

SERVICE BULLETIN TITLE ELECTRICAL POWER - RIGHT HAND ENGINE WIRE BUNDLE ROUTING IMPROVEMENT

Crimping Dies; PN thru 47825, 47915, and 47918

Aluminum Lake Truss Dock Instructions

Nomad CONTROL SYSTEM IMPROVED PULLEY MOUNTING AT STATION (MOD N137) Page No Rev No

SERVICE BULLETIN EQUIPMENT / FURNISHING PASSENGER COMPARTMENT INSPECTION / REPLACEMENT OF EJECTOR BASE SERVICE BULLETIN NUMBER ISSUE 10

MSP-DCCPGSU Large Screen Static Display Mount

MSP-DCCPGTU Large Screen Tilt Display Mount

SERVICE BULLETIN. No. SB-CR-017 Rev.: - Date: Page: 1 of 7 Date: -

SERVICE BULLETIN N F

ETX Powered Loudspeaker Accessories

Installation, Maintenance & Parts Manual

1904, 1904Pg, 1904PgSB, and 1906SB High Capacity Ratchet Knockout Drivers

Multi Tier Stands. Installation, Maintenance & Parts Manual

Aluminum Lake Truss Dock Instructions

To give parts and instructions to replace the wing root canted rib upper cap with a new strengthened replacement cap.

INSTALLATION INSTRUCTIONS Y-Connector Accessory (For Multi-Dual Arm Mounting Systems) Model: KSA-1011

Airworthiness Directive

PLANISHING HAMMER STAND OWNER S MANUAL

PART #MSP-DCCPPWS Plasma Wall Swing-Out (PWS) Wall Mount

Airworthiness Directive

SERVICE BULLETIN TITLE EQUIPMENT/FURNISHINGS - SEAT CONTROL CABLE ROUTING IMPROVEMENT

MTS-SP100. RENOGY Pole Mount System E Philadelphia St, Ontario, CA Version: 1.2

Replacement of Pitch Link Retainer and Service Improvement of the Pitch Control System. Effectivity: Helicopters manufactured prior to January, 1981

SERVICE LETTER. EFFECTIVITY The Model T206H airplanes were delivered from Textron Aviation with a suspect 10865B Oil Cooler.

EKX Full-Range Loudspeaker Accessories

Composite Propeller Blade Field Maintenance and Minor Repair Manual

Pole Mount Installation Guide

MERRY GO ROUND ITEM NO: 8030

Crimping Dies for TERMINYL* and PLASTI-GRIP* Terminals and Splices

ATV STORM CHASER PLOW PUSH TUBE KIT

Swivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.

Access Hatch. Installation Instructions and Operators Manual. PS DOORS Contact Information. Model AH-710 Standard High Neck Radius Cut

Rojek Woodworking Machinery Interchangeable Shaper Spindle Installation and User s Guide

(VSP 116A supercedes and voids VSP 116 dated January 4, 1999)

PLOW MOUNT KIT FOR KAWASAKI TERYX, YAMAHA RHINO P/N ASSEMBLY / OWNERS MANUAL

Medium Flat Panel Dual Swing Arm Wall Mount JWD-V

PART #MSP-DCCST Flat Panel Tilt Mount

INSTALLATION INSTRUCTIONS UTV LIGHT BAR KIT Part Number: and Application: All UTV s*

Crankshaft Gear Modification and Assembly Procedures

WEDDING CAKE STEP INSTRUCTION MANUAL NE100WH TOOLS REQUIRED. NOT Recommended for POOLS with Less Than 15' Diameter. Phillips head screwdriver included

PLOW MOUNT KIT FOR CAN-AM DEFENDER P/N ASSEMBLY / OWNERS MANUAL. Applica on PLOW PUSH FRAME NO or

Cottage Style Dock Instructions

10-PIECE. Garage Storage Set OWNER'S MANUAL. Patent pending

SERVICE LETTER. EFFECTIVITY Model 206H airplanes that have replaced the 10880A Oil Cooler after May SERIAL NUMBERS 206H thru

MEDIUM FLAT PANEL DISPLAY TILT MOUNT MSP-MT (MTR-V)

Manual for Propeller Type H60V

SERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax

Medium Flat Panel Universal Interface Bracket (MSB-V)

Service Bulletin All Vanguard Jaw Crushers

SERVICE BULLETIN

Landscape Drag OWNER S MANUAL

FAA APPROVED AIRPLANE MAINTENANCE MANUAL SUPPLEMENT. Eyebrow Window Replacement

MODEL 83 Pail Handler

CIRRUS AIRPLANE MAINTENANCE MANUAL

00108/00110 INSTRUCTION MANUAL

Chicken Coop OWNER S MANUAL

Type XTSR71 Sizes

MDU-C-SERIES STORAGE RACKS INSTRUCTION MANUAL

PROPELLER TYPE SR 200 ON THE GROUND ADJUSTABLE Vodolská Odolena Voda Czech Republic Tel.: Fax:

Horizontal Mezzanine Gate

INSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount Model: PRO-2000 Series

Full-Motion TV Mount - 47" to 90" Installation Guide

Floating Lake Truss Dock Instructions

PLOW MOUNT KIT FOR POLARIS RZR / GENERAL P/N ASSEMBLY / OWNERS MANUAL. Applica on PLOW PUSH FRAME NO or

Please read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.

Block and Ball Inspection Checklist

Cutting Tools HC-20. Handheld Hydraulic Cutter. Operator s Manual

30 wide track Adjustable Tire Rack

Comp-DS Driveshaft. User Manual B

PLOW MOUNT KIT FOR YAMAHA WOLVERINE P/N ASSEMBLY / OWNERS MANUAL. Applica on PLOW PUSH FRAME NO or

DEPARTMENT OF TRANSPORTATION

Transcription:

1. Planning Information A. Effectivity Hartzell propeller models HC-B(3,4,5)( )(P,N)-( )( ) that were installed on an aircraft, or that have had B-3339 mounting bolts replaced, between January 30, 2001 and December 31, 2002 are affected. All B-3339 propeller mounting bolts are to be inspected for MSA manufacturing lot number 003, in accordance with this Service Bulletin, before installation. B. Concurrent Requirements None C. Reason (1) An occurrence of a failed B-3339 propeller mounting bolt was encountered when 55 Ft-Lb torque was applied to the bolt during a propeller installation. The broken bolt was identified with the marking "MSA" and was from manufacturing lot number 003. Metallurgical analysis of the failed bolt revealed the presence of intergranular corrosion in a pre-existing crack, indicating a manufacturing defect in the bolt. (2) Other B-3339 propeller mounting bolts from MSA manufacturing lot number 003 were subsequently inspected and tested for hardness characteristics. The test results revealed that the hardness of some of the bolts in manufacturing lot number 003 exceeded specification requirements, indicating that those bolts could be more brittle than other lot number bolts. D. Description (1) This Bulletin provides instructions for a one time on-wing inspection to identify the manufacturer and manufacturing lot number of each B-3339 propeller mounting bolt. (2) This Bulletin mandates replacement of all B-3339 propeller mounting bolts that are from MSA manufacturing lot number 003, and provides a procedure for on-wing replacement of the bolts. (3) This Bulletin mandates the replacement of all existing inventory of B-3339 propeller mounting bolts from MSA manufacturing lot number 003. Page 1 of 5

E. Compliance (1) Compliance with the one time on-wing inspection specified in this Bulletin is at next scheduled maintenance activity, not to exceed 100 flight hours or 12 calendar months (whichever occurs first) from the effective date of this Bulletin. (2) All B-3339 propeller mounting bolts are to be inspected for MSA manufacturing lot number 003, in accordance with this Service Bulletin, before installation. F. Approval FAA approval has been obtained on technical data in this publication that affects type design. G. Manpower Approximately 1.0 man-hour per propeller assembly is required to perform the inspection and subsequent propeller mounting bolt replacement, if applicable. H. Weight and Balance Not changed I. Electrical Load Data Not changed J. References Hartzell Propeller Owner's Manual 139 (61-00-39) Hartzell Propeller Owner's Manual 146 (61-00-46) Hartzell Propeller Owner's Manual 167 (61-00-67) K. Other Publications Affected Hartzell Steel Hub Turbine Propeller Maintenance Manual 118 (61-10-18) Hartzell Steel Hub Turbine Propeller Maintenance Manual 132 (61-10-32) Hartzell Propeller Owner's Manual 139 (61-00-39) Hartzell Propeller Owner's Manual 146 (61-00-46) Hartzell Propeller Owner's Manual 167 (61-00-67) Page 2 of 5

2. Material Information A. Material required (if replacement of the mounting bolts is necessary) Part Number Key Word Qty. B-3339 Bolt A/R NOTE 1: NOTE 2: Only bolts identified as MSA manufacturing lot number 003 are required to be replaced. Refer to Figure 1. A bolt that does not have any distinguishable identification markings is not a Hartzell part; therefore, Hartzell Propeller Inc. cannot speak to the quality or the material characteristics of this hardware. 3. Accomplishment Instructions A. Visual Inspection (1) Gain access to the B-3339 propeller mounting bolts. (2) Visually inspect each B-3339 propeller mounting bolt for a broken or missing head. If a broken or missing bolt head is discovered, contact the Product Support Department at Hartzell Propeller before further flight. (3) Visually inspect the head of each B-3339 propeller mounting bolt for identification marks. Refer to Figure 1 for the location of the identification mark. APS0818E Part Number M S A Source Code Manufacturing Lot Number Figure 1 Bolt Head Identification Page 3 of 5

(4) If there are identification marks "MSA" and "003" on the head of any of the mounting bolts, or if the bolt heads cannot be easily accessed to allow visual inspection, perform the following procedure: a Cut and remove the safety wire that secures each propeller mounting bolt. CAUTION: b LOOSEN ALL PROPELLER MOUNTING BOLTS TO ENSURE PROPER PRELOADING OF THE MOUNTING BOLTS WHEN THEY ARE RETORQUED. Loosen each mounting bolt. WARNING: CAUTION 1: DO NOT REMOVE ALL PROPELLER MOUNTING BOLTS AT THE SAME TIME WITHOUT PROPERLY SUPPORTING THE PROPELLER. SERIOUS INJURY OR DAMAGE TO THE PROPELLER COULD RESULT. REMOVE ALL PROPELLER MOUNTING BOLTS THAT HAVE IDENTIFICATION MARKS "MSA" AND "003" ON THE HEAD OF THE BOLT. CAUTION 2: c DO NOT USE EXISTING INVENTORY OF B-3339 PROPELLER MOUNTING BOLTS FROM MSA MANUFACTURING LOT NUMBER 003. Remove one mounting bolt at a time and closely inspect each bolt identification. Replace all propeller mounting bolts that have identification marks "MSA" and "003" on the head of the bolt. Refer to Figure 1. NOTE 1: Some manufacturing lot numbers may be up to six digits long. Bolts with identification marks other than "MSA" and "003" are not affected. d NOTE 2: Affected bolts must be returned to Hartzell Propeller for replacement at no charge. Refer to the Appendix section of this Bulletin for instructions. Re-torque all of the propeller mounting bolts in proper sequence, in accordance with the Installation and Removal chapter of the applicable Hartzell Propeller Owner's Manual. e Safety the mounting bolts with 0.032 inch (0.81 mm) minimum diameter stainless steel wire (two bolts per safety). (5) Indicate compliance with this Service Bulletin in the propeller logbook. Page 4 of 5

B. Replacement of existing inventory (1) Replace all existing inventory of B-3339 propeller mounting bolts from MSA manufacturing lot number 003. (2) Refer to the Special Replacement Program section in the Appendix of this Bulletin for information about replacement of affected mounting bolts. Page 5 of 5

1. Pricing Information Part Number Keyword 2002 List Price B-3339 Mounting Bolt $20.35 NOTE: List price is provided as information only. Refer to paragraph 4., Special Replacement Program, in this appendix, for instructions regarding replacement bolts. 2. Availability/Lead Time A sufficient quantity of replacement bolts is available to allow replacement of all affected bolts. 3. Price Validity Refer to paragraph 4, Special Replacement Program 4. Special Replacement Program A. Propeller mounting bolts B-3339, as identified in paragraph 3.A.(4) Accomplishment Instructions of this Service Bulletin, will be replaced at no charge. B. All existing inventory of B-3339 propeller mounting bolts identified as MSA manufacturing lot number 003 will be replaced at no charge. C. Hartzell will provide replacement mounting bolts for B-3339 mounting bolts as described in paragraphs 4. A. and 4.B. under the following terms: (1) Replacement of an affected mounting bolt may be accomplished as follows: (a) In case subsequent returns are necessary, make copies of the Service Bulletin Compliance form before completing it. (b) Complete the Service Bulletin Compliance form (one form per shipment). (c) Return the completed Service Bulletin Compliance form, along with the affected propeller mounting bolts to the address specified on the form. (d) Upon receipt of the completed form and affected mounting bolts, replacement bolts will be shipped to the address supplied. Propeller Model: HC-B(3,4,5)( )(P,N)-( )( ) Document No. C-SB-61-256 Rev. No. N/A Component Part Number: B-3339 Date of Issue: Feb 8/02 Rev. Date: N/A HC-SBA-61-256 Page 1 of 2

Service Bulletin Compliance Form Please complete this compliance/claim form for each shipment of B-3339 mounting bolts from MSA manufacturing lot number 003, as identified in this Service Bulletin. Return the completed Service Bulletin Compliance form, along with the affected propeller mounting bolts to: Hartzell Propeller Inc. Attn.: Warranty Administrator One Propeller Place Piqua, Ohio 45356-2634 USA Phone: 937.778.4380 B-3339 Mounting Bolt - MSA Mfg. Lot Number 003: Quantity of bolts returned in this shipment: Company: ATTN: Address: City State: Zip: Country: Phone: Fax: Authorized Signature Date: Propeller Model: HC-B(3,4,5)( )(P,N)-( )( ) Document No. C-SB-61-256 Rev. No. N/A Component Part Number: B-3339 Date of Issue: Feb 8/02 Rev. Date: N/A HC-SBA-61-256 Page 2 of 2