Introduction. UV Sterilization System Dimension 3.5mm* 3.5mm* 3.5mm. UV Photo-catalyst ESD protection up to 8KV. UV Sensor Light RoHS compliant

Similar documents
Introduction. UV Sterilization System Dimension 3.5mm* 3.5mm* 3.5mm. UV Photo-catalyst ESD protection up to 8KV

ELUM5A 1.8W Series. Introduction. The UM5A product series is a ceramic based LED with high quality and reliability that suitable for UV application.

EAUVA W Series. Introduction

ELUA4545OG3 1.8W Series

ELUA2016OGB 0.08W Series

Mini Top View LEDs EAPL3527GA5

SMD Low Power LED EAPL2835RA0 Preliminary

SMD B EAST1615RBA0.

Technical Data Sheet Top View LEDs

SMD Middle Power LED 67-21S/NB3C-D4555B4L12835Z15/2T. Preliminary. Features. Description

EVERLIGHT ELECTRONICS CO.,LTD.

SMD B /BHC-AN1P2/3T

Technical Data Sheet 0603 Package Chip LED(0.4mm Height)

SMD Low Power LED 67-21/XK2C-SXXXXXXXXX/2T

1206 Package Chip Infrared LED With Inner Lens EAISV3010A0

Technical Data Sheet 0402 Package Chip LED (0.45 mm Height)

Technical Data Sheet. Top View LEDs with Lens 67-21B/BHC-XS1T2M/BT

EVERLIGHT ELECTRONICS CO., LTD.

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet Side View LED

SMD B 22-23/R6GHBHC-A01/2C

EAST1005RA0 SMD B.

EVERLIGHT ELECTRONICS CO., LTD.

EVERLIGHT ELECTRONICS CO.,LTD.

SMD B EAST3215BA5. Page 1 of 10 Rev. 0.01

Technical Data Sheet 0603 Package Chip LED (0.6mm Height)

SMD B /R6GHBHC-A01/2T

Technical Data Sheet Mini Top LEDs (Reverse Gull Wing)

SMD B A/BHR6GHC-A01/2T

Technical Data Sheet Right Angle Lens Chip LEDs with Bi-Color (Multi-Color)

SMD B /T3D-AQ1R2TY/3T

SMD B 22-23C/R6GHBHW-A01/2C

SMD /RSGHBHC1-S03/2T

Technical Data Sheet 0603 Package Chip LED (0.4mm Height)

19-218/T1D-CQ2R2TY/3T

SMD B /R6G6C-A01/3T

Technical Data Sheet 0603 Package Infrared LED

Technical Data Sheet 0603 Package Chip LED (0.6mm Height)

SMD REFLECTOR 67-03A/R6GHBHW-A01/2T/MS

Technical Data Sheet Chip LED with Bi-Color(Multi-Color)

Technical Data Sheet 1206 Package Chip LED (0.5mm Height)

EVERLIGHT ELECTRONICS CO.,LTD.

SMD BT/ BDGAR6S1-S01/10T

SMD Low Power LED 45-21S/XK2D-HXXXXXXXXB2Z6/2T

Technical Data Sheet Chip LED with Right Angle Lens

Technical Data Sheet Chip LED with Right Angle Lens

23-22C/S2BHC-B30/2A SMD B

SMD MID Power LED 67-21S/KK4C-HXXXXXXXX2833Z6/2T

SMD Low Power LED 67-22S/KK2C-HXXXXXXXXB2Z6/2T

EVERLIGHT ELECTRONICS CO., LTD.

Technical Data Sheet 1206 Package Chip LED

Technical Data Sheet Full Color Top View LEDs

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet 0603 Package Infrared Chip LED SIR19-315/TR8

12-22/R7G6C-A10/2C SMD B

SMD B/BDR6GAS1-R40/10T

SMD REFLECTOR /RSGHB2W-S01/2D/MS

EVERLIGHT ELECTRONICS CO., LTD.

SMD Low Power LED /XK2C-SXXXXXXXXXX/ET

EVERLIGHT ELECTRONICS CO.,LTD.

EAST1608RGA0 SMD B.

EVERLIGHT ELECTRONICS CO.,LTD.

EVERLIGHT ELECTRONICS CO., LTD.

Technical Data Sheet Top View LEDs

Technical Data Sheet Chip LED with Bi-Color(Multi-Color)

0603 Package Infrared LED

Technical Data Sheet 0805 Package Chip LED Preliminary

HNB2727W-OS01 Hong Series

EVERLIGHT ELECTRONICS CO.,LTD.

19-226/R6G7C-B02/2T SMD B. Features. Description. Applications

Display Surface-mount EADSS050GA2

19-213/GHC-ZN2Q1B8X/3T

Technical Data Sheet Infrared MIDLED LED

Received. Revised record

EAIST1005A0 Preliminary

Technical Data Sheet 0603 Package Chip LED(0.6mm Height)

0805 Package Infrared LED EAIST2012A1

17-215/B6C-YP2R2N/3T SMD B. Features. Description. Revision : 2 LifecyclePhase:

Technical Data Sheet 0603 Package Infrared LED

EVERLIGHT ELECTRONICS CO.,LTD.

XI3030P Color Series. Features. Description. Applications. Top view LED Wide viewing angle Pb-free RoHS compliant

EAPL2214GA0-AM. SMD Mini Top View LEDs PRELIMINARY. Features. Applications.

Technical Data Sheet 1.6mm round Subminiature Side Looking Infrared LED IR26-61C/L261/TR8

0.8mm Height Flat Top Infrared LED HIR19-21C/L11/TR8

Technical Data Sheet 0603 Package Infrared Chip LED SIR19-315/TR8

0805 Package Infrared Chip LED IR17-21C/TR8

IRR60-48C/TR8. Description. Applications Sensor Oximeter. Device Selection Guide Device No. Chip Material Lens Color IRR60-48C/TR8

Technical Data Sheet 1.6mm round Subminiature Side Looking Infrared LED EAISV3026A0

SMD Mini Top LEDs Y2SC-A0R1S2B7E-2T8-AM

SMD TOP View LEDs EAPL3527RA2

EVERLIGHT ELECTRONICS CO.,LTD.

SMD BT/BDGAR6S1-L40/10T

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet 0.8mm Height Flat Top Infrared LED

Technical Data Sheet 0603 Package Infrared LED IR19-315C/TR8

1206 Package Chip Infrared LED With Inner Lens IR11-21C/TR8

Technical Data Sheet 1.6mm round Subminiature Side Looking Infrared LED

Display Through-hole ELB-1001SDRWB/S530-A3

Transcription:

EAUVA35353 1.8W Series Introduction The EAUVA35353 product series is a ceramic based LED with high quality and reliability that suitable for UV application. Features Applications High power UVA LED UV Sterilization System Dimension 3.5mm* 3.5mm* 3.5mm UV Photo-catalyst ESD protection up to 8KV UV Sensor Light RoHS compliant Page 1 of 14 Rev. 0.02

Notes: Absolute Maximum Ratings Parameter Symbol Ratings Unit Max. DC Forward Current (ma) I F 700 [1] ma Max. Peak Pulse Current (ma) I Pulse 1000 [2] ma Power Dissipation Pd 3.8 W Max. ESD Resistance V B 8000 V Thermal Resistance R th 5 [4] K/W Max. Junction Temperature T J 125 [5] C Operating Temperature T Opr -40 ~ +110 C Storage Temperature T Stg -40 ~ +110 C 1. Maximum forward current is 700mA (Thermal Pad=25 C). 2. Duty cycle = 1/10@1KHZ 3. The EAUVA series LEDs are not designed for reverse bias use. 4. Thermal Resistance is from junction to backside of component. 5. Maximum junction temperature of UV is 125 C. Electro-Optical Characteristic Radiant Flux e 700 --- --- mw Forward Voltage VF 3.4 --- 4 V Peak Wavelength λp --- 368 --- nm Viewing Angle 2 1/2 --- 50 ---- deg IF=500mA Radiant Flux e 900 --- --- mw Forward Voltage VF 3.2 --- 3.8 V Peak Wavelength λp --- 385 nm Viewing Angle 2 1/2 --- 50 ---- deg IF=500mA Radiant Flux e 900 --- --- mw Forward Voltage VF 3 --- 3.6 V Peak Wavelength λp --- 395 400 nm Viewing Angle 2 1/2 --- 50 ---- deg IF=500mA Radiant Flux e 900 --- --- mw Forward Voltage VF 3 --- 3.6 V Peak Wavelength λp --- 405 --- nm IF=500mA Viewing Angle 2 1/2 --- 50 ---- deg Notes: 1. Radiant flux measurement tolerance: ±10%. 2. The data of luminous flux measured at thermal pad=25 3. Typical luminous flux or light output performance is operated within the condition guided by this datasheet. Page 2 of 14 Rev. 0.02

PN of the EAUVA35353 series: UVA LEDs The table below is a list of part numbers for the Everlight EAUVA35353 1.8W series UVA LED. Typical view angle is 50. These clearly listed binning options allow for proper design and implementation into UV applications. The Order Codes below are currently available UVA EAUVA35353 LEDs. For Example: If you order product using P/N : EAUVA35353BC6, you will be specifying: Color Typ. Peak Wavelength (nm) Forward Voltage (V) Minimum Radiant Flux (mw) UV 368 3.6 700 UV, EAUVA35353 series LEDs at 500mA are listed below Color Order Code of EAUVA35353 Minimum Radiant Flux (mw) Peak Wavelength (nm) Forward Voltage (V) EAUVA35353BC5 700 365~375 3.25-4.15 EAUVA35353BC6 800 365~375 3.25-4.15 EAUVA35353EF7 900 380~390 2.95-3.85 Ultraviolet EAUVA35353EF8 1000 380~390 2.95-3.85 EAUVA35353GH7 900 390~400 2.95-3.85 EAUVA35353GH8 1000 390~400 2.95-3.85 EAUVA35353IJ7 900 400-410 2.95-3.85 EAUVA35353IJ8 1000 400-410 2.95-3.85 Notes: 1. Each 1.8W white PN is based on the min. bin, and includes two adjacent bins Page 3 of 14 Rev. 0.02

Product Binning Peak Wavelength Bins Group Bin Minimum Peak Wavelength (nm) Maximum Peak Wavelength (nm) U UVC P UVA 1 260 265 2 265 270 3 270 275 4 275 280 5 280 285 1 360 365 2 365 370 3 370 375 4 375 380 5 380 385 6 385 390 7 390 395 8 395 400 9 400 405 0 405 410 Radiant Flux Bin Group Bin Minimum Radiant Flux (mw) Maximum Radiant Flux (mw) Q R 1 0 25 2 25 50 3 50 75 4 75 100 5 100 125 6 125 175 7 175 225 8 225 275 9 275 350 1 350 425 2 425 500 3 500 600 4 600 700 5 700 800 6 800 900 7 900 1000 8 1000 1300 9 1300 1600 Page 4 of 14 Rev. 0.02

Forward Voltage Bins Group Bin C D E F V1+V2+V3 V2+V3+V4 V3+V4+V5 V1+V2 Bin Minimum Forward Voltage (V) Maximum Forward Voltage (V) V1 2.95 3.25 V2 3.25 3.55 V3 3.55 3.85 V4 3.85 4.15 V5 4.15 4.45 Page 5 of 14 Rev. 0.02

Mechanical Dimension 1. Dimensions are in millimeters. 2. Tolerances unless mentioned are ± 0.1mm Page 6 of 14 Rev. 0.02

Pad Configuration Page 7 of 14 Rev. 0.02

Typical Characteristics Curves Spectrum @ Thermal Pad Temperature = 25 Forward Current V.S. Peak Wavelength @ Thermal Pad Temperature = 25 Page 8 of 14 Rev. 0.02

Forward Current vs. Relative Radiant Flux @ Thermal Pad Temperature = 25 Forward Voltage vs. Forward Current @ Thermal Pad Temperature = 25 Page 9 of 14 Rev. 0.02

Ambient Temp vs. Peak Wavelength Ambient Temp vs. Relative Radiant Flux Page 10 of 14 Rev. 0.02

Typical Radiation Patterns Typical Diagram Characteristics of Radiation for EAUVA35353 Notes: 1. 2θ 1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value. 2. View angle tolerance is ± 5. Page 11 of 14 Rev. 0.02

Emitter Tape Packaging Carrier Tape Dimensions as the following: Reel: 500pcs Feed Direction Notes: 1.Tolerance unless mentioned is ±0.1mm; Unit = mm 2.Minimum packing amount is 250/500/1000/2000 pcs per reel Moisture Resistant Packaging Label Aluminum moistue-proof bag Label Aluminum moisture-proof bag Desiccant Desiccant Label Label Page 12 of 14 Rev. 0.02

Emitter Reel Packaging Reel Dimensions Notes: 1. Dimensions are in millimeters. 2. Tolerances unless mentioned are ±0.1mm. Label Explanation Product Labeling CPN: Customer Specification (when required) P/N : Everlight Production Number QTY: Packing Quantity CAT: Luminous Flux (Brightness) Bin HUE: Color Bin REF: Forward Voltage Bin LOT No: Lot Number MADE IN TAIWAN: Production Place Page 13 of 14 Rev. 0.02

Storage Conditions Before the package is opened :The LEDs should be stored at 30 C or less and 85%RH or less after being shipped from Everlight and the storage life limits are 1 year. The LEDs can be stored up to 3 years if in a sealed container with a nitrogen atmosphere and moisture absorbent material. After opening the package: The LED's floor life is 168hrs when environment is 30 or less and 60%RH or less. The LED should be soldered within 168hrs (7days) after opening the package. If unused LEDs remain, it should be stored in moisture proof packages. If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5 for 24 hours. Page 14 of 14 Rev. 0.02

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Everlight: EAUVA35353EF8 EAUVA35353BC6 EAUVA35353GH7 EAUVA35353BC5 EAUVA35353EF7 EAUVA35353GH8 EAUVA35353IJ8 EAUVA35353IJ7