Product Line Represented by:
Type of equipment How to read our BDA (or One Way) part number RBDA- 19 Rack BDA FOBDA Fiber Optic BDA RFOBDA Fiber in 19 rack BDA GXXX One Way Booster Band Type (See Frequency Band Chart for our codes) Uplink Power (in Watts) @ 1 db compression X XXX SMR 1/1W-80-A XXX Gain (db) Downlink Power (in Watts) @ 1 db compression Code Uplink Downlink UHF* ( see Note) 380-512 MHz 380-512 MHz CDMA450 ** (see Note) 410-495 MHz 410-595 MHz PS7 793-805 MHz 763-775 MHz SMR 806-821 MHz 851-866 MHz SMR/N (New SMR) 817-824 MHz 862-869 MHz PS8/N ( New PS8) 806-816 MHz 851-861 MHz ESMR800 or PS8 806-824 MHz 851-869 MHz NPSPAC ( PSS) 821-824 MHz 866-869 MHz NPSPAC/N ( New PSS) 806-809 MHz 851-854 MHz CELLA 824-835 MHZ 869-880 MHz CELLB 835-849 MHZ 880-894 MHz CELLAB 824-849 MHZ 869-894 MHz SMR900 896-902 MHZ 935-941 MHz GSML 890-902 MHZ 935-947 MHz GSMH 902-915 MHZ 947-960 MHz GSMF 890-915 MHZ 935-960 MHz 2PGN 900-903 MHZ 929-942 MHz DCS/D 1710-1725 MHz 1805-1820 MHz DCS/C 1725-1740 MHz 1820-1835 MHz DCS/!E 1740-1755 MHz 1835-1850 MHz PCS/!A 1850-1865 MHz 1930-1945 MHz PCS/D 1865-1870 MHz 1945-1950 MHz PCS/B 1870-1885 MHz 1950-1965 MHz PCS/!E 1885-1890 MHz 1965-1970 MHz PCS/F 1890-1895 MHz 1970-1975 MHz PCS/C 1895-1910 MHz 1975-1990 MHz PCS/!AD 1850-1870 MHz 1930-1950 MHz PCS/ADB 1850-1885 MHz 1930-1965 MHz PCS/EF 1885-1895 MHz 1965-1975 MHz PCS/FC 1890-1910 MHz 1970-1990 MHz PCSF 1850-1910 MHz 1930-1990 MHz UMTS 1920-1980 MHz 2110-2170 MHz *Our Standard UHF is 2 MHz bands and 3 MHz separation Corner to Corner ** Standard CDMA 450 is 5 MHz bands and 5 MHz separation Corner to Corner. Options Code Enclosure AB A B N89 Dual band SMR E Extender P Portable O Outdoor OL Outdoor 3
BDA-XXXX-0.5/0.5W-70-A INDOOR MINI BDA s for CELLULAR Bands OR PCS / DCS with 0.5W Uplink and 0.5W Downlink (@ 1 db), and 70dB Gain. Units feature extremely low Noise Figure and a wide dynamic ALC range. The design is based on a duplexed path configuration with sharp out of band attenuation allowing an improved isolation between the receiving and transmitting paths. This type of systems is the most economical solution for several story buildings with weak signal strength outside the covered structure. Frequency Band Uplink Downlink 1 Any Cellular Any Public Safety See page 9 Any PCS or DCS* or UMTS/AWS *NON Contiguous Any Dual Band See Page 12 * Up to 4 non contiguous blocks in PCS are available. call for spec and quote. Visual Alarm Visual Alarm + Remote Monitoring Via 9 Pin Connector GAIN (Minimum attenuation) [db] 70 GAIN Flatness [db] +/- 1.5 (Max.) Noise Figure [db] 3.5 Max- 3 (Typ.) Manual Attenuation Range (Continuous) 0 to 30 in 2 db steps. Power Output @ 1 db Compression [dbm] UPLINK +26 (Typ.) DOWNLINK +26 (Typ.) Output Power ALC Set [dbm] UPLINK + 20 +/- 1 DOWNLINK + 20 +/- 1 Output Composite Power [dbm] UPLINK +20 (Typ.) DOWNLINK +20 (Typ) +39 @ 2 Tones + 14 dbm each UPLINK @ 2 Tones + 14 dbm each DOWNLINK +39 Power Supply ( External) 15 Volt DC Input/Output Impedance 50 ohm VSWR IN/OUT Propagation Delay [µsec.] <1.5:1 < 0.25 4
BDA-XXX-1/1W-80-AB INDOOR BDA s for CELLULAR, Public Safety PCS / DCS or UMTS/AWS with 1 or 2W Uplink and 1W or 2W Downlink (@ 1 db), and 80dB Gain. Units feature extremely low Noise Figure and a wide ALC dynamic range. The design is based on a duplexed path configuration with sharp out of band attenuation allowing an improved isolation between the receiving and transmitting paths. This type of systems is the most economical solution for several story buildings with weak signal strength outside the covered structure. All Systems include Visual Alarm and for a nominal fee we can accommodate Remote Monitoring (via 9 Pin Connector and pigtail). Frequency Band Uplink Downlink 1 SMR or ESMR800 or SMR900 Any Public Safety* SEE Page 9 Any Cellular Any GSM Any PCS/DCS/UMTS/AWS Dual Band SMR800/900 Dual Band CELL/PCS SEE Page 12 Dual Band Public Safety SEE Page 9 *NON Contiguous PCS/DCS * Up to 4 non contiguous blocks in PCS are available. call for spec and quote. 2W uplink or 2W downlink External filter capability Remote Monitoring Option 90+ db gain GAIN (Minimum attenuation) [db] 80 GAIN Flatness [db] +/- 1.5 (Max.) Noise Figure [db] 4.5 (Max), 4 (Typ.) Manual Attenuation Range (Continuous) 0 to 30 in 2 db steps. Power Output @ 1 db Compression [dbm] +32 (Min.) Output Power ALC Set [dbm] + 25 +/- 1 Output Composite Power [dbm] +25 (Typ.) +45 @ 2 Tones + 20 dbm each Power Supply 110 to 220 VAC (Autoranging) Input/Output Impedance 50 ohm VSWR IN/OUT <1.5:1 Propagation Delay [µsec.] < 0.25 5
BDA-XXX-1/10W-80-A B INDOOR BDA s for CELLULAR, Public Safety, & PCS / DCS with 1 or 2W Uplink and 10W Downlink (@ 1 db), and 80dB Gain. Units feature extremely low Noise Figure and a wide dynamic ALC range. The design is based on a duplexed path configuration with sharp out of band attenuation allowing an improved isolation between the receiving and transmitting paths. This type of systems is the most economical solution for several story buildings with weak signal strength outside the covered structure. All Systems include Visual Alarm and for a nominal fee we can accommodate Remote Monitoring (via 9 Pin Connector and pigtail). Frequency Band Uplink Downlink 1 SMR or ESMR800 or SMR900 Any Public Safety* SEE Page 9 Any Cellular Any GSM Any PCS/DCS/UMTS/AWS Dual Band SMR800/900 Dual Band CELL/PCS SEE Page 12 Dual Band Public Safety SEE Page 9 *NON Contiguous PCS/DCS * Up to 4 non contiguous blocks in PCS are available. call for spec and quote. 2W uplink /10W downlink External filter capability Remote Monitoring Option 90+ db gain GAIN (Minimum attenuation) [db] 80 GAIN Flatness [db] +/- 1.5 (Max.) Noise Figure [db] 4.5 (Typ.) Manual Attenuation Range (Continuous) 0 to 30 in 2 db steps. Power Output @ 1 db Compression [dbm] UPLINK +32 (Typ.) DOWNLINK +40 (Typ.) Output Power ALC Set [dbm] UPLINK + 25 +/- 1 DOWNLINK + 33 +/- 1 Output Composite Power [dbm] UPLINK +25 (Typ.) DOWNLINK +33 (Typ) +45 @ 2 Tones + 20 dbm each UPLINK +50 @ 2 Tones + 27 dbm each DOWNLINK Power Supply 110 to 220 VAC (Autoranging) Input/Output Impedance 50 ohm VSWR IN/OUT <1.5:1 Propagation Delay [µsec.] < 0.25 6
BDA-XXXX-1/25W-90-O OUTDOOR BDA s for CELLULAR, Public Safety, & PCS/DCS/UMTS/AWS with bands with 1 or 2W uplink and 25W downlink (@ 1 db), and 90dB gain. The units are built in NEMA 4 enclosures, to withstand the outside environment. All units come with standard AC line Surge protection and local visual alarm indicators. All outdoor Repeaters can be equipped with an optional Uninterruptible Power Supplies (UPS). Frequency Band Uplink Downlink 1 SMR or ESMR or SMR900 Public Safety CALL FOR SPEC & QUOTE ANY CELL ANY GSM ANY PCS/ DCS/UMTA/AWS DUAL BAND SMR 800/900 *Non Contiguous CELL ( A+A or B+B ) *Non Contiguous DCS or PCS or UMTA /AWS * Up to 4 non contiguous blocks in PCS are available. call for spec and quote. 2W uplink /25W downlink Remote monitoring 7 pin connector and Pigtail External 28 VDC for Battery backup Complete UPS GAIN (Minimum attenuation) [db] 90 GAIN Flatness [db] +/- 1.5 (Max.) Noise Figure [db] 4 (Typ.) Manual Attenuation Range (Continuous) 0 to 30 in 2 db steps. 1/25W 2/25W Power Output @ 1 db Compression [dbm] UPLINK +32 (Typ.) +34 (Typ.) DOWNLINK +44 (Typ.) +44 (Typ.) Output Power ALC Set [dbm] UPLINK + 25 +/- 1 + 27 +/- 1 DOWNLINK +37 +/- 1 + 37 +/- 1 Output Composite Power [dbm] UPLINK +25 (Typ.) +27 (Typ.) DOWNLINK +37 (Typ) +37 (Typ.) @ 2 Tones + 20 dbm each @ 2 Tones + 30 dbm each Power Supply UPLINK DOWNLINK Input/Output Impedance VSWR IN/OUT <1.5:1 Propagation Delay [µsec.] < 0.25 +45 +47 +55 +55 110 to 220 VAC (Autoranging) 50 ohm 7
BDA-XXXX-1/50W-90-LO OUTDOOR BDA s for CELLULAR, Public Safety, & PCS/DCS/UMTS/AWS with bands with 1 or 2W uplink and 25W downlink (@ 1 db), and 90dB gain. The units are built in NEMA 4 enclosures, to withstand the outside environment. All units come with standard AC line Surge protection and local visual alarm indicators. All outdoor Repeaters can be equipped with an optional Uninterruptible Power Supplies (UPS). Frequency Band Uplink Downlink 1 SMR or ESMR or SMR900 Public Safety CALL FOR SPEC & QUOTE ANY CELL ANY GSM ANY PCS/ DCS/UMTA/AWS DUAL BAND SMR 800/900 *Non Contiguous CELL ( A+A or B+B ) *Non Contiguous DCS or PCS or UMTA /AWS * Up to 4 non contiguous blocks in PCS are available. call for spec and quote. 2W uplink /25W downlink Remote monitoring 7 pin connector and Pigtail External 28 VDC for Battery backup Complete UPS GAIN (Minimum attenuation) [db] 90 GAIN Flatness [db] +/- 1.5 (Max.) Noise Figure [db] 4 (Typ.) Manual Attenuation Range (Continuous) 0 to 30 in 2 db steps. 1/50W 2/50W Power Output @ 1 db Compression [dbm] UPLINK +32 (Typ.) +34 (Typ.) DOWNLIN +47 (Typ.) +47 (Typ.) Output Power ALC Set [dbm] UPLINK + 25 +/- 1 + 27 +/- 1 DOWNLIN + 40 +/- 1 + 40 +/- 1 Output Composite Power [dbm] UPLINK +25 (Typ.) +27 (Typ.) DOWNLIN +40 (Typ) +40 (Typ) +45 +47 @ 2 Tones + 20 dbm each UPLINK +59 +59 @ 2 Tones + 36 dbm each DOWNLIN Power Supply 110V to 220V (Autoranging) Input/Output Impedance 50 ohm VSWR IN/OUT <1.5:1 Propagation Delay [µsec.] < 0.25 8
PUBLIC SAFETY Single and Dual Bands Public Safety: INDOOR BDA s for Public Safety, Units feature extremely low noise figure and a wide dynamic range. The design is based on a duplexed path configuration with sharp out of band attenuation allowing an improved isolation between the receiving and transmitting paths. This type of systems is the most economical solution for several story buildings with weak signal strength outside the covered structure. All Systems include Visual Alarm and for a nominal fee we can accommodate Remote Monitoring (via 9 Pin Connector and pigtail). Please call for additional monitoring options. We can offer OUTDOOR BDA s for Public Safety please contact us for details. Frequency Band Uplink Downlink MINI 1W 10W PS 700 793-805 763-775 PS 800 806-824 851-869 PS 900 896-902 935-941 NPSPAC 821-824 866-869 NPSPAC/N 806-809 851-854 PS 800 NEW 806-816 851-861 Dual Band 700/800 793-824 763-775 / 851-869 Dual Band 800/900 806-824 / 896-902 851-869 / 935-941 Re-Bandable Single Band Old to New Old to New Re-Bandable Dual Band Old to New Old to New Options MINI: Visual Alarm Visual Alarm + Remote Monitoring Via 9 Pin Connector Options 1W : 2W uplink or 2W downlink Remote monitoring 9 pin connector and Pigtail Options 10W : 2W uplink /10W downlink Remote monitoring 9 pin connector and Pigtail Note- The local re-bandable option will allow with a flip of a switch to shift from old frequencies to the new ones. MINI 1W 10W XXX-0.5/0.5W-70-A XXX-1/1W-80-AB GAIN (Minimum attenuation) [db] 70 80 80 XXX-1/10W-80-AB G AIN Flatness [db] +/- 1.5 (Max.) +/- 1.5 (Max.) +/- 1.5 (Max.) Noise Figure [db] 3.5 Max- 3 (Typ.) 4.5 (Max), 4 (Typ.) 4.5 (Typ.) Manual Attenuation Range (Continuous) 0 to 30 in 2 db steps. 0 to 30 in 2 db steps. 0 to 30 in 2 db steps. Power Output @ 1 db Compression [dbm] UPLINK +26 (Typ.) +32 (Min.) +32 (Typ.) DOWNLINK +26 (Typ.) +32 (Min.) +40 (Typ.) Output Power ALC Set [dbm] UPLINK + 20 +/- 1 + 25 +/- 1 + 25 +/- 1 DOWNLINK + 20 +/- 1 + 25 +/- 1 + 33 +/- 1 Output Composite Power [dbm] UPLINK +20 (Typ.) +25 (Typ.) +25 (Typ.) DOWNLINK +20 (Typ) +25 (Typ.) +33 (Typ) +39 +45 +45 @ 2 Tones + 14 dbm each UPLINK @ 2 Tones + 14 dbm each DOWNLINK +39 +45 +50 Power Supply ( External) 110 to 220 VAC (Autoranging) ( External) 50 ohm <1.5:1 110 to 220 VAC (Autoranging) Input/Output Impedance 50 ohm 50 ohm V SWR IN/OUT <1.5:1 <1.5:1 Propagation Delay [µsec.] < 0.25 < 0.25 < 0.25 110 to 220 VAC (Autoranging) 9
BDA-UHF or CDMA450-4/4W-70-A and BDA-UHF or CDMA450-4/4W-55-AB UHF or CDMA450 BDA s with 4W uplink and 4W downlink (@1dB), and 70dB or 55dB gain. The design is based on a Duplex path configuration with sharp out of band attenuation allowing improved isolation between the TX and RX paths covering any UHF 2 MHz BW and CDMA450 5MHz BW (between 380-512 MHz) maintaining a 3 MHz ( UHF) or 5MHz (CDMA450) separation Corner to Corner. The unit uses a Wall Mount or a NEMA 4 enclosures that can be used indoor and outdoor. We can offer Remote Monitoring Via 7 Pin or 9 Pin Connectors and pigtail. Frequency Band Uplink Downlink 1 UHF/ CDMA 450 55 db gain 380-512 380-512 UHF/ CDMA 450 70 db gain 380-512 380-512 UHF BW: 3MHz (see note) CDMA BW: 5MHz (see note) UHF= 2 MHz CDMA= 5 MHz UHF= 2 MHz CDMA= 5 MHz ** Visual Alarm Option Note We can offer the BDA s in 19 Racks please contact for Price. NOTE: Standard Separation for UHF and CDMA 450 are defined as Corner to Corner. Should you require special non standard separation please contact us for pricing and availability. Visual Alarm option ; 55 db gain system Remote Monitoring Option (with Visual Alarm option) GAIN (Minimum attenuation) [db] 55 or 70 GAIN Flatness [db] +/- 1.5 (Max.) Noise Figure [db] 4.5 (Typ.) Manual Attenuation Range (Continuous) 0 to 30 in 2 db steps. Power Output @ 1 db Compression [dbm] UPLINK +39 (Typ.) DOWNLINK +39 (Typ.) Output Power ALC Set [dbm] UPLINK + 31 +/- 1 DOWNLINK + 31 +/- 1 Output Composite Power [dbm] UPLINK +31 (Typ.) DOWNLINK +31 (Typ) +51 @ 2 Tones + 27 dbm each UPLINK +51 @ 2 Tones + 27 dbm each DOWNLINK Power Supply 110 to 220 VAC (Autoranging) Input/Output Impedance 50 ohm VSWR IN/OUT <1.5:1 Propagation Delay [µsec.] < 0.3 10
LINE EXTENDER -BDA-XXXX-0.15/0.15W-35-E or DOWNLINK BOOSTERS LINE EXTENDER/BDA s for CELL or PCS with 0.15W Uplink and 0.15W Downlink (@ 1 db), and 35dB Gain. In-Line Bi-Directional Amplifiers (Extenders) were designed as Bi-Directional Line Amplifiers for use in Distributed Antenna Systems (DAS) to compensate for cable loss on long cable runs. Extenders are used as indoor repeaters with external AC/DC converters or as In-Line amplifiers when DC power is injected through the BTS port. Additionally, Downlink Boosters offer typical 35dB additional gain when placed as front end of the Repeater with minimal Uplink loss. Perfect solution for High Gain (Low signal) environments! Frequency Band Uplink Downlink 1 SMR 806-821 MHz 851-866 MHz GSM L 890-902 MHz 935-947 MHz GSM H 902-915 MHz 947-960 MHz Cellular AB* 824-849 MHz 869-894 MHz PCS AD 1850-1870 MHz 1930-1950 MHz PCS BE 1870-1890 MHz 1950-1970 MHz PCS AD 1890-1910 MHz 1970-1990 MHz PCSF ( full band) 1850-1910 MHz 1930-1990 MHz Dual Band CELL/PCS CELL/PCS Dual Band 700/800 793-824 MHz 763-775/851-869 MHz Dual Band 800/900 806-824/896-902 MHz 851-869/935-941 MHz GAIN (Minimum attenuation) [db] 35 GAIN Flatness [db] +/- 1.5 (Max.) Noise Figure [db] 4(Typ.) Manual Attenuation Range (Continuous) 0 to 30 in 2dB steps Power Output @ 1 db Compression [dbm] +21 (Typ.) Output Composite Power [dbm] +14 (Typ.) +32 Power Supply 12V DC Input/Output Impedance 50 ohm VSWR IN/OUT <1.5:1 11
DUAL BAND BDA s DUAL BAND BDA s The Dual-Band Bi-Directional Amplifiers (BDA's) extend the coverage area of radio communications inbuildings and RF shielded environments. Units feature low noise figure and wide dynamic range. The design is a multi-block system, based on a Quad-path configuration with sharp out of band attenuation allowing improved isolation between the receiving and transmitting paths, plus SMR/Cell/GSM and PCS/DCS paths. BDA-CELLXX/PCS/XX-0.5/0.5W-70-B or B1 INDOOR DUAL BAND for any cellular band combined with any PCS Blocks with 0.5W uplink and 0.5W downlink (@ 1 db) and 70dB gain. Local visual alarms are included. Frequency Band 0.5/0.5W CELL/X/PCS/X Uplink Downlink 1 * Remote Monitoring Capability Via 9 Pin connector and pigtail BDA-CELLXX/PCS/XX-1/1W-80-AB INDOOR DUAL BAND for any cellular band combined with any PCS Blocks with 1W uplink and 1W or 10W downlink (@ 1 db) and 80dB gain. Local visual alarms are included. 1/1W CELL/X/PCS/!X 1/10W CELL/X/PCS/X Remote Monitoring Capability Via 9 Pin connector and pigtail 2W CELL or 2W PCS BDA-CELLXX/PCS/XX-1/25W-90-A or 1/50W-90-A OUTDOOR DUAL BAND for any cellular band combined with any PCS Blocks with 1W or 2W uplink and 25W or 50W downlink (@ 1 db) with 90 db gain. 1/25W OUTDOOR CELL/X/PCS/!X 1/50W OUTDOOR CELL/X/PCS/X Remote Monitoring Capability Via 7 Pin connector and pigtail 2W CELL or 2W PCS Ask for specs. 12
ONE WAY BOOSTER Our INDOOR ONE WAY BOOSTER for, VHF, UHF, GPS, 700, 800, 900, 1800, 1900, 2100 and 2500 MHz, 20dBm power (@ 1 db) and 70 db Gain or 25, 27 or 33 dbm power (@ 1 db) and 80dB Gain. Units feature extremely Low Noise figure and a wide dynamic ALC range. The boosters are an economic solution when ONLY ONE WAY signal boosting is required. Frequency Band AS required NOTE: We can offer one way Boosters for other frequencies: UHF, DCS, PCS and GPS please call for specs and prices!!!! Part # GAXXX/4/70SK-A1 GAXXX/5/80SK-B GAXXX/5/80SK-B1 GAXXX/5/80SK-A2 GAIN (Minimum attenuation) [db] 70 80 80 80 GAIN Flatness [db] +/- 1 (Max.) +/- 1.5 (Max.) +/- 1.5 (Max.) +/- 1.5 (Max.) Noise Figure [db] 4 (Max.) 3 (Typ.) 5 (Max.) 4 (Typ.) 5 (Max.) 4 (Typ.) 5 (Max.) 4 (Typ.) Manual Attenuation Range (Continuous) 0 to 30 in 2 db steps. 0 to 30 in 2 db steps. 0 to 30 in 2 db steps. 0 to 30 in 2 db steps. Power Output @ 1 db Compression [dbm] +27 (Typ.) +32 (Typ.) +34 (Typ.) +40 (Typ.) Output Power ALC Set [dbm] + 20 +/- 1 + 25 +/- 1 + 27 +/- 1 + 33 +/- 1 Output Composite Power [dbm] +20 (Typ.) +25 (Typ.) +27 (Typ.) +33 (Typ.) @ 2 Tones + 20 dbm each +39 +45 +47 +50 Power Supply +15 VDC/0.7A 110 to 220 VAC (Autoranging) Visual Alarm Visual Alarm + Remote Monitoring Via 9 Pin Connector 110 to 220 VAC (Autoranging) Input/Output Impedance 50 ohm 50 ohm 50 ohm 50 ohm VSWR IN/OUT <1.5:1 <1.5:1 <1.5:1 <1.5:1 Propagation Delay <.25 <.25 <.25 <.25 110V to 220 VAC (Autoranging) 13
FIBER LINK ONE WAY ONE WAY Fiber BOOSTER One-way Fiber link is offered in 1:1 and 1:4 Master and Remote configurations. The Master serves not only as a pre-selector, but as an enhanced selective front End Booster with 35dB Gain. These links offer 55 to 70 db link Gain, superb Noise Figure and Excellent IP3 performance, regardless of the Composite power output for the remote unit. Offered for; VHF, UHF, PSS, SMR, CELL, DCS PCS and UMTS bands as we as Dual Band and Multi Bands on the same DAS. Visual alarms for Laser and Amplifier are included in price. UMTS Dual Band* * Dual Band = any combination of 2 bands that are non contiguous in Public Safety 700/800, ESMR800/900, Cell/PCS, GSM900/DCS1800 Options ADD 19" rack Nema 4 External Monitoring Via 9 pin connector External Monitoring Via 7 pin connector for NEMA 4 S1 - External DC for Back Up option FOR ADDITIONAL OPTIONS - CONTACT US 14
FIBER LINK BDA s Fiber link is offered in 1:1 and 1:4 Master and Remote configurations. The Master serves only as a Pre- Selector with an input signal protection circuit and attenuator. The links offer 45 to 55 db link Gain, superb Noise Figure and Excellent IP3 performance, regardless of the Composite power output for the Remote unit. This type of Master offers initial selectivity with a reduced Noise Floor and allows the use of external Front End BDA s as needed. G-Way/G-Wave offers a complete line for such Front End BDA s with Downlink Composite power of +15dBm, which can be easily reduced to -10 to 0dBm input power going to the Fiber Optic Transceiver without the need for External Attenuators. Offered for: UHF, PSS, SMR, CELL, DCS PCS and UMTS bands as well as Dual Band and Multi Band on the same DAS. Visual alarms for Laser and Amplifier are included in price. Master Remote 0.5W 1W 2W 10W 1 : 1 1 : 4 20dBm 25 dbm 27 dbm 33 dbm CELL or PCS or Public Safety UHF UMTS Dual Band* * Dual Band = any combination of 2 bands that are non contiguous in Public Safety 700/800, ESMR800/900, Cell/PCS, GSM900/DCS1800 Options add 19" rack Nema 4 External Monitoring Via 9 pin connector * External Monitoring Via 7 pin connector for NEMA 4 S1 - External DC for Back Up option FOR ADDITIONAL OPTIONS - CONTACT NAVAIR at 1-800-668-7440 15
ACCESSORIES We carry a full line of accessories for the Telecommunication market: Filters: Cavity filters manufactured by G-Way/G-Wave exhibit Unmatched LOW Insertion Loss, High Selectivity, and Excellent Passive Intermodulation performance. The filters we offer as accessories are needed for most installers/integrators and system designers. We offer both BAND REJECT and BAND PASS Filters as needed Please contact us with any requirement. Diplexers: When two filters are connected together at one side a Diplexer is created. The Diplexer is a 3 port device. In Wireless Communications, diplexers are used to connect the Receive path (Rx) and Transmit path (Tx) to one Common or Antenna port. G-Way/G-Wave uses a vast variety of High Q Cavity Diplexers in most systems offered, and some products are offered as accessories needed for most installers/integrators and system designers. Please contact us with any requirement. Duplexers: When two filters are connected together at both ends a Duplexer is created. The Duplexer is a 2 port device. In Wireless Communications, duplexers are used to enhance selectivity of BDA s or TMA s. G-Way/G-Wave uses a vast variety of High Q Cavity Duplexers, and some products are offered as accessories needed for most installers/integrators and system designers. Please contact us with any requirement. Cross Band Couplers: We offer a large variety of Cross Band Coupler when you need to combine a number of Carriers in various bands such as VHF/UHF/CELL/PCS/UMTS etc. in the same DAS (Distribution Antenna System) - Please contact us with any questions. NAVAIR at 1-800-668-7440. PART # Description LOW Pass Band HIGH Pass Band Each CD880/1922SK-E3 SMR+CELLAB/PCSN 806-894 MHz 1850-1995 MHz CD881/60SK-M3 SMR 800!SMR 900 806-866 MHz 896-941 MHz CD520/880SK-E3 UHF + CELL CD2400/5787MK-D2 Wideband Combiner up to WiMax+ NEW!!!! ASK For SPEC CD2200/2450MK-D3 Wideband Combiner NEW!!! ASK For SPEC CBB859/25SK-D3 Duplexer CELL AB 824-849 MHz 869-894 MHz CBB836/15SK-S1 High Q Dual filter Assembly SMR 806-821 MHz 851-866 MHz CBB838/18SK-S1 High Q Dual filter Assembly ESMR 806-824 MHz 851-869 MHz Splitters/Combiners: The Splitter/Combiners share a common stripline design for low power indoor applications covering all the wireless services from 800 to 2500 MHz. The extremely wide range allows use with multi-band antennas and leaky cable systems. PART # Description Pass Band Each MSI-B0221 2 way splitter, 30 W 800-2500 MHz MSI-B0321 3 way splitter, 30 W 800-2500 MHz MSI-B0421 4 way splitter, 30 W 800-2500 MHz MSI-PS-B0221 2 way splitter, 30 W 760-2500 MHz MSI-PS-B0321 3 way splitter, 30 W 760-2500 MHz MSI-PS-B0421 4 way splitter, 30 W 760-2500 MHz MSI-B0621 6 way splitter, 30 W 800-2500 MHz MSI-B0260 UHF 2 way splitter, 30 W 380-520 MHz MSI-B0360 UHF 3 way splitter, 30 W 380-520 MHz MSI-B0460 UHF 4 way splitter, 30 W 380-520 MHz AMA-2255-2N High PIM performance 2 Way, 100 W 800-2500 MHz AMA-2255-3N High PIM performance 3 Way, 100 W 800-2500 MHz AMA-2255-4N High PIM performance 4 Way, 100 W 800-2500 MHz 16
Directional Couplers: Our updated Coupler/Splitter range was specifically designed for Cellular Telecommunications, PCS and UMTS, and now also includes the Public Safety 700 and UHF bands. The couplers are designed for in-building network distribution applications. PART # Description Pass Band Each MSI-B201-XX Directional coupler up to 30Watts 3, 4.8, 6, 7, 10, 20 db 800-2500 MHz MSI-PS-B201-XX Directional coupler including Public Safety up to 30Watts 760-2500 MHz 3, 4.8, 6, 7, 10, 20 db MSI-B1600-XX UHF Directional coupler up to 30Watts 3, 4.8, 6, 7, 10, 20 db 380-520 MHz AMA-1255-XX-1W High PIM Performance Directional coupler up to 100Watts 3, 4.8, 6, 7, 10, 15 db 800-2500 MHz Antennas: Our updated line includes Yagi antennas for CELLULAR, Yagi antennas for PCS and wide band indoor distribution Omni antennas. PART # Description Pass Band Each TDJ-8019010YG 10 dbi 824-960 YAGI Antenna 824-960 MHz TDJ-1912YG 12 dbi 1850-1990 YAGI Antenna 1850-1990 MHz TDI-800/2500 3 dbi INDOOR Panel Antenna 800-2500 MHz TQI-4FC-1 2 dbi INDOOR OMNI Antenna 800-2500 MHz LPDA-A0021-02 11 dbi Dual Band YAGI Antenna 800-2200 MHz 17
18
19