ROUND LIGHTPLANE 1 3D RLP1/3D LED Find additional images and information at www.alwusa.com/product/lightplane-1-round-rlp1-3d
PRODUCT SUBMITTAL WORKSHEET 1. BASE MODEL RLP1/3D RLP1/3D/F Page 2 of 10 1" surface-mount, rotatable light channel with 2ft. and/or 4ft. bar(s) directly connected to mounting canopy(s). 1" surface flush-mount, rotatable light channel with no mounting stem 2. CEILING TYPE MUD/TRIM GRID Universal Mud-In and Trim components for drywall, wood, and other surfaces Grid ceilings 3. COUNT (B) (S) (D) See instructions on page 6 to submit your RLP1/3D configuration (Steps 1-3). Step 2 indicates how to calculate Bar Length Count. / / BLANK (B) UNILLUMINATED SINGLE-SIDE (S) ILLUMINATED DOUBLE-SIDE (D) ILLUMINATED Fill in Total Feet of Blank (B), Single-Side (S), and Double-Side (D) bars. FLUSH x = (S): (D): (B): Add up (feet) of all bars. 4. LED CCT (KELVIN) STD/80/ 2700K 3000K 3500K 4000K 80CRI, 2700K 80CRI, 3000K 80CRI, 3500K 80CRI, 4000K LUMENS (LM) 1 WATTS (W) EFFICACY (LM/W) 476 4.64 ~100 1 Performance values based off 1ft. Single-Sided (S) Illuminated section. 5. REMOTE DRIVER 2 0/10V/5% 0-10V dimming (Dimming range is 100% - 5%) DALI DALI dimming to 5% DMX DMX dimming to 5% ECOSYS5 Lutron 5-Series 5% EcoSystem, constant current 2 All drivers are remote. Fixture is ETL Listed and confirms to UL Standard 2108.
PRODUCT SUBMITTAL WORKSHEET CONTINUED 6. LENS EXT EXT Extra diffuse Page 3 of 10 7. FINISH (S) AL BK BRS SV WH WH/AM RAL/ Natural Anodized Aluminum (Standard Finish) Black powdercoat Brass metallic powdercoat Silver powdercoat White powdercoat White antimicrobial powdercoat for healthcare environments Specify RAL powdercoat code (ex: #RAL/3003) 8. FINISH (HUBS & CANOPIES) AL BK BRS SV WH WH/AM RAL/ Natural Anodized Aluminum (Standard Finish) Black powdercoat Brass metallic powdercoat Silver powdercoat White powdercoat White antimicrobial powdercoat for healthcare environments Specify RAL powdercoat code (ex: #RAL/3003) 9. VOLTAGE UNV Universal voltage 120VAC - 277VAC 347 3 347 volt 3 Driver options may be limited with 347 voltage. Consult factory. 10. ADDITIONAL OPTIONS NONE EMC/ 4 ENLGHT/ 5,6,7 OS/ 7 PH 7 None Emergency circuit (indicate total quantity, ex: EMC/4) Enlighted remoted smart sensor (occupancy, daylight, networking and more) 0-10V remoted occupancy sensor (indicate total quantity, ex: OS/4) 0-10V remoted photocell/daylight sensor (indicate total quantity, ex: PH/4) 4 Consult factory for available options 5 Enlighted Gateway and Energy Manager (by others) plus programming required. Learn more at enlightedinc.com. 6 Compatible with 0-10V driver only. Contact factory for alternative options. 7 Select quantity of 1 for every 8 ft. (ex:enlght3 for 24 feet of bars)
MECHANICAL DIAGRAMS - S Single-Sided Illuminated (S) Double-Sided Illuminated (D) Blank Unilluminated (B) Page 4 of 10 1 3 / 16" 1 3 / 16" 1 3 / 16" 2' nominal (23.7" actual) 4' nominal (47.3" actual) NOTE:.125 inch tolerance applies to actual measurements MECHANICAL DIAGRAMS - MOUNTING COMPONENTS TYPE DIMENSIONS CONNECTIONS 3.62in. J-Box Canopy Mud Plate For use with octogonal J-Boxes (not included). Fits 3/8in. wall thickness. Use 1/8in. Mud Spacers for thicker walls. 3/8in. Mud Ring 1.85in. 0.125in. (1/8in.) 1/8in. Mud Spacers 2x included with each J-Box Canopy Mud Plate to fit wall thicknesses of 3/8in., 1/2in., and 5/8in. Ø 1.75in. Ø 2.20in. 2x 1/8in. Mud Spacers 3/8in. Mud Ring 0.30in. Mounting Canopy Ø 2.48in. Ø 3.00in.
MECHANICAL DIAGRAMS - HUBS TYPE DIMENSIONS CONNECTIONS Page 5 of 10 L-Hub 2.14in. L-Hub-1 2.64in. T-Hub 2.14in. 2.64in. T-Hub-1 2.64in. X-Hub 2.14in. 2.64in. X-Hub-1
HOW TO SUBMIT YOUR RLP1/3D CONFIGURATION 1. SKETCH YOUR DESIGN IN THE 3D CONFIGURATION GRAPH (PGS. 7 & 8). Alternatively, you can create your design using the CADready STEP files provided on the RLP1/3D product page. Download the STEP files at alwusa.com/rlp1/3d. Save your CAD assembly as a.step AP214 file and submit to ALW. Page 6 of 10 3. COMPLETE THE PRODUCT CODE WORKSHEET (PGS. 2-3). PRODUCT SUBMITTAL WORKSHEET 1. BASE MODEL RLP1/3D RLP1/3D/F 1" surface-mount, rotatable light channel with 2ft. or 4ft. mounting stem (bar) 1" surface flush-mount, rotatable light channel with no mounting stem 2. CEILING TYPE MUD/TRIM TGRID Universal Mud-In and Trim components for drywall, wood, and other surfaces T-Grid 3. COUNT Use the chart on page 10 to calculate total linear length of bars (inches). LINEAR (INCHES): S Blank Single Double Unilluminated (B) Illuminated (S) Illuminated (D) COMPLETE CODE Separate each with a slash and enter in box to left. ex: 0/96/480 4. LED CCT (KELVIN) STD/80/ 2700K 3000K 3500K 4000K 80CRI, 2700K 80CRI, 3000K 80CRI, 3500K 80CRI, 4000K 1 LUMENS (LM) WATTS (W) EFFICACY (LM/W) 560 4.64 120 1 Performance values based off 1ft. Single-Sided (S) Illuminated section. 5. REMOTE DRIVER 2 0/10V/5% 0-10V dimming (Dimming range is 100% - 5%) DALI DALI dimming to 5% DMX DMX dimming to 5% ECOSYS5 Lutron 5-Series 5% EcoSystem, constant current 2 All drivers are remote. Fixture is ETL Listed and confirms to UL Standard 2108. 6. LENS EXT EXT Extra diffuse 2. CALCULATE IN FEET WITH THE CALCULATOR (PG. 9). 4. SUBMIT FORMS BELOW TO ALW FOR REVIEW. 1. 3D CONFIGURATION GRAPH (PG. 8) or STEP AP214 FILE 2. PRODUCT CODE WORKSHEET (PGS. 2-3) CALCULATOR Use the tool below to determine component quantities 1. Add up the total RLP1/3D lengths: Blank Unilluminated (B), Single-Side Illuminated (S), & Double-Side Illuminated (D). 2. Copy the totals into Step 2 of the WORKSHEET (pg. 2). BLANK (B) UNILLUMINATED DOUBLE-SIDE (D) ILLUMINATED SINGLE-SIDE (D) ILLUMINATED (in.) (in.) (in.) FLUSH x = 24in. x = 48in. x = (B): Add up of all sections. Ex: 36 in. 24in. x = 48in. x = (B): Add up of all sections. Ex: 36 in. 24in. x = 48in. x = (B): Add up of all sections. Ex: 36 in.
3D CONFIGURATION GRAPH EXAMPLE Page 7 of 10 3D CONFIGURATION GRAPH VIEW BOTTOM VIEW TOP VIEW SYMBOL KEY Solid lines & characters: Solid lines indicate RLP1/3D bars. Characters indicate illumination type. Lightbar Illumination: B = Blank unilluminated S = Single-sided illuminated, D = Double-sided illumiated Place B, S, or D to right side of vertical bars. Place B, S, or D below horizontal bars. Solid-filled circle = Hub Unfilled oval = Mounting Canopy Unfilled oval with solid-filled circle = Indicates when Mounting Canopy and Hub fall on the same visual plane Crossed solid lines = Overlapping bars at different visual planes. These bars are not connected together with a Hub
3D CONFIGURATION GRAPH Page 8 of 10 SYMBOL KEY Solid lines & characters: Solid lines indicate RLP1/3D sections (bars). Characters indicate illumination type. Lightbar Illumination: B = Blank unilluminated S = Single-sided illuminated, D = Double-sided illumiated Place B, S, or D to right side of vertical sections. Place B, S, or D below horizintal sections Solid-filled circle = Joiner Hub Unfilled oval = Mounting Canopy Unfilled oval with solid-filled circle = Indicates when canopy and joiner hub fall on the same visual plane Crossed solid lines = Overlapping lightbars at different visual planes. These lightbars are not connected together
CALCULATOR Page 9 of 10 Use the tool below to determine component quantities 1. Add up the total RLP1/3D lengths (feet): Blank Unilluminated (B), Single-Side Illuminated (S), & Double-Side Illuminated (D). 2. Copy the totals into Step 3 of the WORKSHEET (pg. 2). BLANK (B) UNILLUMINATED SINGLE-SIDE (S) ILLUMINATED DOUBLE-SIDE (D) ILLUMINATED FLUSH x = (S): (D): (B): Add up (feet) of all bars. See example below. CALCULATOR EXAMPLE The tool below has been filled to match the example configuration on page 7. BLANK (B) UNILLUMINATED SINGLE-SIDE (S) ILLUMINATED DOUBLE-SIDE (D) ILLUMINATED FLUSH x = 2 ft. x 20 = 40 ft. 2 ft. x 4 = 8 ft. (S): 40 ft. (D): 8 ft. (B): 0 ft.
ADDITIONAL HOUSING 100% recyclable, extruded architectural grade T6061 aluminum with.08" minimum wall thickness. ELECTRICAL LED drivers are Class 2. L80 >50,000 hours. 80+ CRI. ETL listed for damp location. OPERATING TEMPERATURE Luminaire should be installed and operated ONLY in environments where the ambient temperature ranges from -4 F (-20 C) to 122 F (50 C). Operating the luminaire in environments outside the listed temperature range voids the warranty AND may damage the product or adversely impact lamp life, lumen output and color consistency. LINEAR LENS OPTIONS Page 10 of 10 Extruded, twin-layered, high-impact acrylic. EXT is white, extra diffuse with minimal-to-no source visibility. FINISH Standard finish is Natural Anodized Aluminum a smooth, clean and durable finish achieved from a deep-etch and two-step clear anodizing process. White, black, silver, brass and color RAL powdercoat options also available. For healthcare environments, a white antimicrobial finish (WH/AM) is also an option. EMERGENCY Luminaires can be wired for emergency circuit. Consult factory for details. ALUMINUM AL WHITE WH & WH/AM BLACK BK REMOTE DRIVER DISTANCE LED Remote Driver Distance*: Constant Current Driver Type 18 Gauge Wire SILVER SV BRASS BRS COLOR RAL Dimmable 0-10V 120FT DALI/DMX 72FT Lutron Hilume A Series L3D/LTE 22FT *Consult factory for longer distances