TECHNICAL SPECIFICATIONS OF THE RICHARD MILLE TOURBILLON RM 051 PHOENIX-MICHELLE YEOH Tonneau case - Limited edition of 18 unique pieces in 18k white gold, 18K red gold and titanium gem-set case. CALIBER RM051: manual winding tourbillon movement with hours, minutes and power reserve, inspired by the RM 026. Dimensions : 48 mm x 39.70 mm x 12.80 mm. MAIN FEATURES (MANY OF WHICH ARE MAJOR TECHNICAL INNOVATIONS) POWER RESERVE Circa 48 hours. This function is displayed using a newly designed differential power reserve system with a printed red line on a moving disc located between 10 and 11 o clock. BLACK ONYX BASEPLATE Onyx is a variety of cryptocrystalline quartz chalcedony composed of silicium dioxide, (SiO2). The rectilinear black and white parallel stripes version is part of the agate types. The fully black type is called Black Onyx, and is said to be able to deflect harmful energy down to the earth, while providing stability. For this reason, Black Onyx is considered as a charm-stone against spells. Black Onyx also symbolizes equilibrium and inspiration. BRIDGES MADE OF TITANIUM These components are in grade 5 titanium with black PVD treatment. This provides the whole assembly great rigidity, as well as precise surface flatness which is essential for the perfect functioning of the gear train. VARIABLE INERTIA, FREE SPRUNG BALANCE The free-sprung balance provides better reliability in the event of shocks, movement assembly and disassembly. It also guarantees better chronometric results over an extended period of time. TORQUE LIMITING CROWN This additional security system prevents from accidental overwinding, which could cause damage to the winding stem or putting extreme pressure on the mainspring barrel. The crown is set with precious stones or semi-precious stones depending on the version. BARREL PAWL WITH PROGRESSIVE RECOIL This device permits a profitable winding gain (circa 20 %), especially during the winding start, when the spring is not charged. It is also helpful in the distribution of the mainspring s internal tension. 1
RM 051 PHOENIX-MICHELLE YEOH OTHER FEATURES - Movement dimensions: 30.20 mm x 28.60 mm - Thickness: 4.97 mm - Tourbillon diameter: 12.30 mm - Balance wheel diameter: 9.12 mm - Number of jewels: 21 - Balance: Glucydur, 2 arms, 4 setting screws, inertia moment 10 mg.cm 2, angle of lift 53º - Frequency: 21,600 vph (3 Hz) - Balance spring: Elinvar by NIVAROX - Shock protection: KIF Elastor KE 160 B28 - Stone setting in white gold - Barrel shaft in nickel-free Chronifer (DIN x 46 Cr 13 + S) with the following characteristics: stainless- antimagnetic- suitable for tempering CASE In the world of horology, the case of Richard Mille watches is currently considered as the most difficult to manufacture. This tripartite tonneau-shaped case is fully curved, which enables the watch to be ergonomic and comfortable but is time consuming during its production and requires a high level of quality control. These front and back curves are part of the Richard Mille watch case regardless of their shapes (tonneau, round, rectangular). They demand ultimate precision and no stress in the metal. The bezel side and the case back have to be perfectly assembled in the case middle with no constraints, to prevent the sapphires from any damage. These manufacturing specifications required one year of research and development. The tonneau shape of the RM 051 requires 47 stamping operations including 21 for the forming. Tooling takes 4 hours and the RM 051 is obtained after 255 milling operations. The finishing process requires a full day for grinding, glazing and polishing. The tripartite case is water resistant to 50 meters, ensured by two Nitril O-ring seals. The case is assembled with 12 spline screws in grade 5 titanium and abrasion resistant washers in 316L stainless steel. INTERIOR FLANGES Upper flange in black carbon fiber, with the hours index set with diamonds. Lower flange in black carbon fiber. with the minutes index in white color. CRYSTAL Bezel side: In sapphire (hardness 1800 Vickers) with anti-glare treatment (both sides) Thickness: 1.20 mm Case back: In sapphire with anti-glare treatment (both sides) Thickness: at the center 1 mm and outer edges 1.73 mm 2
RM 051 PHOENIX-MICHELLE YEOH FINISHING MOVEMENT - Anglage and polishing by hand (excluding Onyx baseplate and PVD treated parts) - Locking sections hand polished - Sapphire blasted milled sections - Lapped and polished contact points - Burnished pivots - PVD treatment (excluding the Onyx baseplate) STEEL PARTS - Sapphire blasted surfaces - Satin finished surfaces - Anglage and polishing by hand - Burnished sections GEAR WHEELS - Concave chamfering with a diamond tool - Circular finished faces - Surface treatment or rhodium-plating (before cutting the teeth) - Minimum correction applied to the wheels in order to preserve geometry and performance 3