Accessories
CTH/4 The CTH/4 accepts chairs stacked on it for transportation enabling the user to wheel the trolley without having to take any of the load. Features include a strap to retain the stack of chairs in position, a tubular mild steel powder coated frame and rubber wheels. Accepts Flair. Length 82 Width 66 Height 110 Weight 12.5kg CHAIR TROLLEYS AND TABLE TRUCKS Our range of Chair Trolleys and Table Trucks have been designed to safely transport all our chair and table ranges. There are six Chair Trolleys to choose from and you will find the relevant model for all our chair ranges in the information featured. Our Table Trucks (overleaf) are designed for easy manoeuvrability and protection from damage whilst the tables are being stored. The TT/F and TTE/M are designed for our Slimfold range and the TTFC is designed specifically for our System-C and Configure-8 ranges. CTH/5 The CTH/5 is a 2-wheeled chair trolley for transporting stacks of chairs under the rear legs. It has an extra rail incorporated lower down to accommodate chair models with lower backs. Accepts Forum, Tiani & Vio. Length 26 Width 66 Height 125 Weight 8.5kg CTH/6 The CTH/6 is a 3-wheeled chair trolley for transporting stacks of chairs. The trolley enables the chairs to be moved with maximum ease and minimum effort. Accepts Cello, Comfortflex, Como, Fiora, Orvia, Siena, Turini & Vario. Length 84 Width 66 Height 105.5 Weight 11kg
CTH/1 The CTH/1 is a 2-wheeled chair trolley for transporting stacks of chairs under the rear legs. Features include a tubular mild steel, powder coated frame and rubber wheels. All models EXCEPT Evosa, Forum, Sentrum, Tiani and Vio. Length 26 Width 66 Height 125 Weight 8.2kg CTH/7 The CTH/7 is a 2-wheeled chair trolley with a padded panel for transporting stacks of mesh backed chairs. The trolley enables the chairs to be moved with maximum ease and minimum effort. Accepts Sentrum. Length 26 Width 66 Height 113 Weight 8.5kg CTH/8 The CTH/8 is a 2-wheeled chair trolley with padded panel for transporting stacks of Evosa chairs. The additional front loop slides under the seat frame to ensure the stack is supported during use. The trolley enables the chairs to be moved with maximum ease and minimum effort. Accepts Evosa. Length 80 Width 65.5 Height 125 Weight 10.3kg (approx)
TT/F Designed specifically for our Slimfold Tables. The TT/F Table Truck provides a simple solution for rectangular tables, allowing flat, stacked storage for up to 10 tables. It has the same features as for the TTFC. MODEL Length Width Height Weight Accepts Tables TTF/13 144 82 112 31.3kg L < 122 W < 76 TTF/14 175 82 112 32.3kg L < 152 W < 76 TTF/15 205 82 112 33.2kg L < 183 W < 76 The weights of all trolleys are when they are unloaded. All measurements are in cm.
TTFC TABLE TRUCK Designed specifically for our System-C and Configure-8 Tables, this provides a simple and efficient means of storage and transportation. The TTFC Table Truck range provides a simple solution for rectangular tables, allowing flat, stacked storage for up to 8 tables and has 4 removable handles with foam sleeves to protect hardwood lipping. Features include: Tubular mild steel construction throughout, with ply boarding where required. Pewter hammer finish powder coated frame. Grey non-marking corner buffers. Swivel and braked castors. MODEL Length Width Height Weight Accepts Tables TTFC 1245 133 89 133 48kg SYS.1 / C.811 TTFC 1260 133 89 133 48kg SYS.5 / C.821 TTFC 1275 133 89 133 48kg SYS.9 / C.831 TTFC 1345 143 89 133 50kg SYS.13 / C.812 TTFC 1360 143 89 133 50kg SYS.14 / C.822 TTFC 1375 143 89 133 50kg SYS.15 / C.832 TTFC 1545 163 89 133 51kg SYS.2 / C.813 TTFC 1560 163 89 133 51kg SYS.6 / C.823 TTFC 1575 163 89 133 51kg SYS.10 / C.833 TTFC 1845 193 89 133 54kg SYS.3 / C.814 TTFC 1860 193 89 133 54kg SYS.7 / C.824 TTFC 1875 193 89 133 54kg SYS.11 / C.834 TTE/M Designed specifically for our Slimfold Tables. The TTE/M Multipurpose Table Truck range provides on edge storage for round, half-round or rectangular tables. There is space for up to 10 tables, and internal divisions allow safe loading/unloading with removable end handles to secure the payload whilst in transit. It has the same features as for the TTFC. MODEL Length Width Loaded Weight Accepts Height Tables TTE/2M 130 82 144 36kg DIA122 TTE/3M 160 82 168 38kg DIA152 TTE/4M 191 82 192 39kg DIA183
DANCE FLOORS We have a wide range of Dance Floors available from polished wood parquet sections to modern high gloss finishes, as well as an eye catching black and white check design, all supplied with aluminium border trim. FLORLOK/OUTLOK Caddy 112 x 70 x 127 26kg PUBLOK Caddy 140 x 68 x 130 26kg BOX DOUBLE ACCORDION SHIRRED
TABLE AND STAGE SKIRTING Our Table and Stage Skirting is available in three heading styles: box, double accordion or shirred, and is manufactured to your specific size requirements. The skirting is attached with a velcro system, and the fabric can be selected from a large range of colours and fabric finishes. Please ask for our selection of fabric swatch cards, or visit our website where you can download them in pdf format. CHAIR COVERS Our made to order chair covers give that finishing touch to any event or celebration. There are four chair cover designs to choose from, and there is a full range of colours in each fabric so you can match your decor or table linen. A A Plain front with ties at the back. Shown here in Buckingham fabric. B Plain front with two pleats at the back and separate sash. Shown here in Dimensions fabric. C Plain front with two pleats at the back. Shown here in Dimensions fabric. D Plain front with butterfly bow and two pleats at the back. Shown here in Dimensions fabric. B D C
BI-FOLD SCREENS Designed for room dividing or screening off areas, our Bi-fold Screens can be manufactured to complement your interior colour scheme from a wide range of fabric colours, or suitable fabric can be specified, with full frame finish options. Please ask for our fabric swatch card and frame finishes card, or visit our website where you can download them in pdf format. Overall Height: 192 Length when fully extended: 241 Length when folded: 121 Overall Width (Castor Mounting): 46
BARRIER SYSTEMS We have three Barrier Systems to choose from: EXECUTIVE 4-WAY LOOP RANGE These posts are available in both chrome and brass, incorporating a four way top plate, sign holders and additional wall plate. CLASSIC 4-WAY LOOP RANGE Includes most features of the Executive Range, and a choice of either classic ball or contemporary coronet post heads. CORONET BALL ROPES A choice of three standard braided or twisted rope colours in 1m, 1.5m and 2m lengths with chrome snap ends. SIGN HOLDERS Available in A4 landscape or portrait BRAIDED ROPES RED BLUE BLACK TWISTED ROPES BURGUNDY DARK BLUE BLACK FLEXI RANGE This has an innovative rewinding mechanism, a four directional system, 3m maximum length and remarkably strong tape available in four colours. With this range there are accessories such as sign and brochure holders, and acrylic shelves. BLACK GREY RED BLUE FOUR DIRECTIONAL SYSTEM
LECTERNS Burgess have an extensive range of Lecterns available in real wood veneer, melamine laminate, powder coated mild steel and clear acrylic. Some of our lecterns offer you the choice to add optional extras such as cable management, logo and more (where available). The selection we offer means you are sure to be able to find the perfect lectern for your venue. Jupiter Real Wood Veneer Cable Management W660 x D530 x H1170mm Approx Weight 50kg Neptune Real Wood Veneer Cable Management / 1 Shelf 26mm Wood Throughout W600 x D400 x H1150mm Approx Weight 30kg Saturn Real Wood Veneer 30mm Wood Throughout FINISH OPTIONS W700x D450 x H1120mm Approx Weight 40kg Real Wood Veneer Available for Jupiter, Neptune and Saturn Maple Veneer Ash Veneer Beech Veneer Oak Veneer Walnut Veneer Cherry Veneer Mahogany Veneer Melamine Laminates Available for Neptune only Maple Melamine Ash Melamine Beech Melamine Oak Melamine Walnut Melamine Cherry Melamine Moon Only available in Solid Indonesian Mahogany W680 x D400 x H1190mm Approx Weight 25kg OPTIONAL EXTRAS - Wood & Melamine Cable Management Logo Glass Holder with Glass Lectern Light Pack LED Gooseneck Light Lectern Cover Venus 20mm Acrylic W600 x D400 x H1180mm Approx Weight 30kg Mercury Powder Coated Mild Steel W600 x D400 x H1135mm Approx Weight 35kg OPTIONAL EXTRAS - Acrylic Logo Lectern Light Pack Lectern Cover Anti-Static Acrylic Cleaner Mars 12mm Acrylic Frosted Front Panel / Clear Side Panels / One Shelf W600 x D400 x H1180mm Approx Weight 30kg
60cm 17cm Low level light 90cm OPTIONAL Customised logos available. Curved backing panel fitted to dress panel with velcro for ease of removal. Dress panel available in a range of colours. 54.5cm LECTRUM L2001 / L2001C Lectrum has a unique, dynamic design. Constructed of custom aluminium extrusions and aluminium plate with a dress panel in a range of colours. Features include: Built-in document shield with concealed 150mm halogen gooseneck reading light. Concealed cable management. Microphone and low voltage power cables concealed within leg, terminated at connection box on lower cross bar. Dual XLR microphone inputs with on-board phantom power for condenser microphones. Gently curved, illuminated dress panel in velour fabric, available in a wide range of colours. Customised logos available. Adjustable height glides under toes. Model L2001C only Programmable LCD clock with count-down timer and low level audible alarm. FINISHES: STANDARD SILVER/GREY BLACK PREMIUM GOLD SILVER For the dress panel please ask for the fabric swatch card or visit our website where you can download it in pdf format.
Made in Britain We are proud to say that for over half a century we have made all our chairs and tables to exacting standards in our West London factory. Quality Management Environmental Policy As a leading industrial enterprise, we recognise our responsibility to the environment and are committed to achieving best environmental practice. To this end we actively ensure that the environmental impact all of our materials, processes and products is reduced as much as possible or eliminated. The company is certified to ISO 14001 as well as having membership to Club Green, the highly acclaimed initiative run by FIRA. For more information visit our website: www.burgessfurniture.com/environmental-policy.html Environmental Management MADE IN BRITAIN Burgess Furniture Ltd Hanworth Trading Estate, Feltham, Middlesex TW13 6EH UK Telephone +44 (0)20 8894 9231 Fax +44 (0)20 8894 2943 Email sales@burgessfurniture.com Web www.burgessfurniture.com follow us on: The paper used for this brochure is made from 100% recycled material. Please recycle. Issue date: November 2016