HEAVY DUTY. Shown with optional girder trolley & chain block. 2300mm (T7953) (T7955) (T7956)

HEAVY DUTY EQUIPMENT MAY - JULY 2013 MGT-1T - MOBILE GIRDER RAIL This mobile gantry type girder rail is ideal for assisting in engine removal & installation for your car or 4WD, simply attach your girder trolley and chain block to the rail, connect your engine to the chain block and lift to desired height, then its as easy as unlocking the brakes & wheeling the unit into position. CHAIN BLOCKS Safety catch on swivel hook Ball bearing load wheel High resistance G80 load chain Double safety brake pawls CAPACITY 1 Tonne x 3M C152 1 Tonne x 6M C153 2 Tonne x 3M C154 80 88 110 121 130 143 1 tonne load capacity 2500-3600mm adjustable height gantry with quick release safety locking pins - both ends 2300mm inside frame clearance 4 x swivel caster wheels with brake NEW RELEASE Shown with optional girder trolley & chain block GIRDER TROLLEYS Fully adjustable to suit different beam widths Ball bearing wheels CAPACITY 570 627 inc GST (C188) 2300mm 1 Tonne C183 2 Tonne C184 70 77 100 110 PARTS BINS ABS drawers - oil & impact resistant Includes drawer dividers Mobile Base (596 x 454 x 160mm) 130.90 144 inc GST (T797) Mobile Base (890 x 410 x 185mm) 140 154 inc GST (T7971) NEW RELEASE (T7962) (T7951) (T7952) (T7953) (T7955) (T7956) (T7958) (T7961) (T7964) MODEL PTB-20 PTB-32 PTB-60 PTB-24C PTB-48C PTB-48CD PTB-18CHD PTB-15CHD PTB-30CHD ORDER CODE T7951 T7952 T7953 T7955 T7956 T7958 T7961 T7962 T7964 Drawers Qty 20 32 60 24 48 48 18 15 30 Drawers Type ABS ABS ABS ABS + Clear ABS + Clear ABS + Clear ABS + Clear ABS + Clear ABS + Clear Drawers (LxWxH) mm 90x218x70 90x218x70 90x218x70 120x218x69 120x218x69 120x218x69 164x375x105 164x375x105 164x375x105 Cabinet (LxWxH) mm 586x222x350 466x222x642 586x222x937 444x222x642 586x222x937 586x270x970 550x400x880 880x400x440 880x400x880 Bin Load Capacity 10kg each 10kg each 10kg each 10kg each 10kg each 10kg each 20kg each 20kg each 20kg each PRICE 170 190 340 180 320 450 360 300 480 PRICE inc GST 187 209 374 198 352 495 396 330 528 Specifications, prices & availability are subject to change without notice. Prices do not include freight. 1

AL-250G BENCH LATHE 12 spindle speed geared headstock incorporates a single progression dial 26mm spindle bore 125mm centre height 500mm between centres 12 speeds (80-1600rpm) 0.75kW/1hp 240V Includes: 130mm 3-jaw chuck, faceplate, dead centres, change gears, steadies, leadscrew cover, safety chuck guard, rear splash tray & swarf tray AL-340D CENTRE LATHE 2 Axis digital readout system QC Toolpost 39mm spindle bore 178mm centre height 1000mm between centres 8 speed (70-2000rpm) 1.5kW/2hp 240V motor Includes: 3 & 4 Jaw chucks, faceplate, dead centre, work light, fixed & travelling steadies, foot brake, splash tray, leadscrew covers, safety chuck guard & stand CL-38A CENTRE LATHE 2 Axis digital readout system QC Toolpost 52mm spindle bore 205mm centre height 1000mm between centres 16 speed (45-1800rpm) 3.3kW/4.5hp 415V Includes: 3 & 4 Jaw chucks, faceplate, dead centres, work light, fixed & travelling steadies, foot brake, splash tray, leadscrew covers, safety chuck guard & stand OPTIONAL STAND 250 275 inc GST (L150) 1,590 1,749 inc GST (L149) 5,150 5,665 inc GST (L179D) 7,950 8,745 inc GST (L191D) 4-JAW LATHE CHUCK - 125mm Suits AL-250G Bench Lathe (L149) Includes adaptor plate to mount to AL-250G bench lathe LATHE CHUCK GUARDS Complete with mounting bracket, micro switch, and wiring for 12V or 24V Retro fits to all centre or bench lathes PARTING TOOLS KITS 12mm PARTING KIT Package Code L464 Parting Off Block (L027) Parting Off Blade (26 x 2mm) (L468) L151 130 143 TURNING TOOL SET 16mm Insert type L0077 180 198 3 x turning 2 x profile 1 x parting 1 x threading Includes 1 insert per tool SUITS SUITS Centre Lathe Height Chuck Max 178mm Ø200mm G610 203mm Ø250mm G612 255mm Ø350mm G614 330mm Ø400mm G616 150 165 220 242 270 297 350 385 Professional kit for the toolroom & workshop application Kit consists of a block, blade & Kennametal inserts 16mm PARTING KIT Package Code L465 Parting Off Block (L028) Parting Off Blade (26 x 2mm) (L468) 2 x Inserts A2022 (L0512) 169 inc GST 185.90 SAVE 17.38 2 x Inserts A2022 (L0512) 169 inc GST 185.90 SAVE 17.38 20mm PARTING KIT Package Code L466 Parting Off Block (L029) Parting Off Blade (26 x 3mm) (L469) 2 x Inserts A2030 (L0513) 169 inc GST 185.90 SAVE 22.88 TURNING TOOL KITS THREADING TOOL KITS 12mm Package Code L450 16mm Package Code L451 12mm Package Code L456 16mm Package Code L457 Turning Tool (R/H) (L015) Turning Tool (L/H) (L016) Boring Bar (L021) Inserts (pkt 10) TCMT110204 (L062) 230 inc GST 253.00 Turning Tool (R/H) (L017) Turning Tool (L/H) (L018) Boring Bar (L022) Inserts (pkt 10) TCMT110204 (L062) 250 inc GST 275.00 Int Threading Tool (L036) Ex. Threading Tool (L031) 2 x 55º Inserts (L055/L057) 2 x 60º Inserts (L056/L058) 170 inc GST 187.00 SAVE 53.90 Int Threading Tool (L036) Ex. Threading Tool (L032) 2 x 55º Inserts (L055/L057) 2 x 60º Inserts (L056/L058) 170 inc GST 187.00 SAVE 74.80 20mm Package Code L452 Turning Tool (R/H) (L039) Turning Tool (L/H) (L040) Boring Bar (L415) Inserts (pkt 10) WNMG0804 (L053) 325 inc GST 357.50 25mm Package Code L453 Turning Tool (R/H) (L041) Turning Tool (L/H) (L042) Boring Bar (L416) Inserts (pkt 10) WNMG0804 (L053) 349 inc GST 383.90 L452 & L453 20mm Package Code L458 Int Threading Tool (L038) Ex. Threading Tool (L033) 2 x 55º Inserts (L055/L057) 2 x 60º Inserts (L056/L058) 180 inc GST 198.00 SAVE 107.80 25mm Package Code L459 Int Threading Tool (L0385) Ex. Threading Tool (L034) 2 x 55º Inserts (L055/L057) 2 x 60º Inserts (L056/L058) 225 inc GST 247.50 SAVE 107.80 2 Specifications, prices & availability are subject to change without notice. Prices do not include freight.

MAY - JULY 2013 HM-32 MILL DRILL HM-36 MILL DRILL SIEG X3 MILL DRILL Quiet B-section belt drive system 12 speed (100-2150rpm) 1.5kW / 2hp, 240V motor 820mm x 240mm ground work table Fine feed hand wheel operating quill feed 3MT spindle with Ø75mm lockable quill Includes: Drill chuck & arbor, face mill cutter & arbor, 3" tilting vice, 2-3MT sleeve & safety cutter guard Tilting head to ±90º from vertical Gear driven head 6 speeds (95-1600rpm) 1.1kW / 1.5hp, 240V motor 730mm x 210mm ground work table Fine feed hand wheel operating quill feed 3MT spindle with Ø75mm lockable quill Includes: Drill chuck & arbor, face mill cutter & arbor, 2-3MT sleeve & safety cutter guard Electronic variable speed system (100-2000rpm) 2-speed gearbox (high/low) drive system to maximise torque Dovetail vertical slide 0.6kW / 0.75hp, 240V motor 25mm mill & drill capacity 550 x 160mm table size 50mm face mill capacity 3MT spindle Includes: Drill chuck, 3MT arbor, safety cutter guard OPTIONAL STAND 270 297 inc GST (M135A) OPTIONAL STAND 270 297 inc GST (M135A) OPTIONAL STAND 320 352 inc GST (M154A) 1,350 1,485 inc GST (M121) 1,590 1,749 inc GST (M122) 1,590 1,749 inc GST (M153) CLAMP KITS - 58 PCE C099 C092 Slot Stud 1/2" 3/8"UNC (C090) 99 108.90 5/8" 1/2"UNC (C091) 99 108.90 3/4" 5/8"UNC (C092) 135 148.50 5/8" 1/2"UNC (C094) 115 126.50 10mm M8x1.25 (C095) 130 143.00 12mm M10x1.25 (C0951) 105 115.50 14mm M12x1.75 (C096) 115 126.50 16mm M12x1.75 (C096A) 115 126.50 18mm M16x2 (C097) 170 187.00 20mm M18x2.5 (C098) 290 319.00 22mm M20x2.5 (C099) 395 434.50 K-TYPE MILLING VICES Jaws hardened & ground alloy steel Graduated swivel base Size Open Weight 63.5mm 51mm 5.7kg (V112) 90 99.00 100mm 62mm 11.0kg (V104) 135 148.50 127mm 80mm 17.0kg (V105) 190 209.00 152mm 112mm 28.0kg (V106) 210 231.00 203mm 146mm 58.0kg (V108) 370 407.00 UNIVERSAL MILLING KIT 3 positive rake cutters suitable for low powered machines Includes: 12 & 16mm end mill, 50mm face mill, 10 x inserts APMT103504PDER M530 250 275 V112 V108 PF-X3 POWER FEED UNIT Suits X3 Mill Drill (M153) 0-1100mm/min Inch button 240V M233 320 352 COOLANT PUMP & TANK 1/8HP 240V PVC supply & drain hose Magnetic base nozzle P235 220 242 COLLET & CHUCK SETS SAFETY GUARDS ROTARY TABLES Includes spanner Chuck and 6 collets Blow-mould case C9245 Type Taper Qty ER32 3MT 6 (C922B) 225 247.50 ER32 NT30 6 (C9245) 225 247.50 G601 Complete with mounting bracket, micro switch & wiring to suit 12 or 24V Suits Mill Head Mill/Drill Head (G601) 59 64.90 Belt Drive Turret Mill Head (G603) 270 297.00 Variable Speed Turret Mill Head (G605) 270 297.00 High level of accuracy Adjustable back lash Smooth operation for precision work Hardened and ground worm gear Vernier reading 10 sec Gear ratio 90-1 Table is graduated to 360º so one turn of handle R008 moves table 4º Diameter Height 110mm 80mm (R005) 270 297.00 150mm 80mm (R006) 290 319.00 200mm 105mm (R008) 450 495.00 250mm 115mm (R010) 550 605.00 300mm 135mm (R012) 699 768.90 350mm 140mm (R012A) 910 1,001.00 406mm 155mm (R012B) 1,199 1,318.90 Specifications, prices & availability are subject to change without notice. Prices do not include freight. 3 G603 G605

DRILLING MACHINES Drilling machines include: Safety micro switch on pulley guard, drill chuck and arbor 1hp 240V motor 16-speed 3MT 28mm drill capacity A-Section belt drive 1.5hp 240V motor 12-speed 3MT 31.5mm drill capacity A-Section belt drive 1hp 240V motor 9-speed 3MT 31.5mm drill capacity B-Section belt drive 1hp 240V motor 16-speed 2MT 16mm drill capacity M-Section belt drive 1hp 240V motor 16-speed 2MT 20mm drill capacity A-Section belt drive 1HP SBD-20B Bench 1HP SBD-25A Bench 1HP 1.5HP 1HP 270 330 297 inc GST (D138) 363 inc GST (D144) SPD-20B Pedestal SPD-25A Pedestal PD-22 Pedestal PD-26 Pedestal PD-35 Pedestal 300 370 470 690 1,180 330 inc GST (D140) 407 inc GST (D147) 517 inc GST (D148) 759 inc GST (D152) 1,298 inc GST (D162) DRILL CHUCK ARBORS Hardened & ground CAPACITY 2MT x JT2 (D4412) 12 13.20 2MT x JT6 (D442) 14 15.40 2MT x JT3 (D442A) 14 15.40 3MT x JT6 (D443) 18 19.80 3MT x JT3 (D443A) 18 19.80 3MT x JT4 (D455) 25 27.50 4MT x JT6 (D454) 25 27.50 4MT x JT3 (D454A) 25 27.50 4MT x JT4 (D456) 25 27.50 MT SLEEVES Hardened & ground CAPACITY 2MT x 1MT (D420) 3MT x 2MT (D422) 4MT x 2MT (D423) 4MT x 3MT (D424) 5MT x 4MT (D425) 6MT x 5MT (D426) 10 11.00 15 16.50 20 22.00 22 24.20 48 52.80 135 148.50 KEYED DRILL CHUCKS - Heavy Duty Robust design Supplied with chuck key Capacity Taper 0.5-13mm JT6 (C289) 49 53.90 0.5-16mm JT3 (C290) 69 75.90 KEYLESS DRILL CHUCKS - Industrial Superior gripping Precision manufactured Capacity Taper 0.5-13mm JT6 (C292) 85 93.50 3-16mm JT3 (C294) 99 108.90 DELUXE - DRILL PRESS VICE Manufactured from close grain cast iron. The Deluxe Vice comes with jaws that are hardened, with vertical and horizontal grooves for prismatic work. COMPOUND DRILL VICES Cast iron body Adjustable slides GRAVITY FEED COOLANT SYSTEM 1 litre bottles Easily mounted to the side of your machine Second bottle supplied which can be mounted underneath table and recovers coolant SIZE 100mm (V144) 68 74.80 SIZE Travel 105mm 114 x 102mm (V120) 72 79.20 150mm 203 x 152mm (V122) 115 126.50 P220 25 27.50 4 Specifications, prices & availability are subject to change without notice. Prices do not include freight.

MAY - JULY 2013 SLOT DRILL SET Manufactured from HSS M35 5% Co Bright Finish Screwed Shank Two Flute END MILL SET Manufactured from HSS M35 5% Co Bright Finish Screwed Shank Four Flute END MILL SET - Solid carbide Manufactured from Solid Carbide Bright Finish Plain Shank SLOT DRILL & END MILL SETS Manufactured from HSS M2 Plain shank Includes 5 end mills & 5 slot drills 10 PCE METRIC 6, 10, 12, 16, 20mm 105 115.50 inc GST (M3301) 5 PCE METRIC 6, 8, 10, 12, 16mm 5 PCE METRIC 6, 8, 10, 12, 16mm 4 PCE METRIC 6, 8, 10, 12mm 10 PCE IMPERIAL 1/4", 3/8", 1/2", 5/8", 3/4" 69 69 139 105 75.90 inc GST (M3351) 75.90 inc GST (M3352) 152.90 inc GST (M337) 115.50 inc GST (M3321) COUNTERBORE SET HSS M35 Bright finish Plain Shank 6 piece set Range: M3, M4, M5, M6, M8, M10 RADIUS CUTTER SET 4 piece set High Grade High Speed Steel M35 Bright Finish Radius sizes: 4, 5, 6, 8mm Shank sizes: 12, 12, 16, 20mm BALL NOSE CUTTER SET HSS M35 5% Co Bright Finish Plain Shank 2 Flute Shank sizes: 6, 10, 10, 12, 16mm 5 PCE METRIC 6, 8, 10, 12, 16mm INDUSTRIAL COUNTERSINK SETS 4 piece HSS M2 Bright Finish Cross hole type Sizes: 2-5, 5-10, 10-15, 15-20mm Angle 45 6 piece suitable for sheetmetal HSS M2 Bright Finish 3 flute type Sizes: 1.5-6.3, 6.3-8.3, 8.3-10.4, 10.4-12.4, 12.4-16.5, 16.5-20.5mm 99 99 85 60 70 108.90 inc GST (M3381) 108.90 inc GST (M3391) 93.50 inc GST (M3355) 66 inc GST (D1051) 77 inc GST (D1061) COMBINATION DRILL & TAP SET HSS M2 Bright Finsih Hex Shank M3, M4, M5, M6, M8, M10 Includes Hex snap-on for hand drill 45 49.50 inc GST (T0191) CENTRE DRILL SET Industrial Quality HSS M2 Bright Finish No. 1, 2, 3, 4, 5 35 38.50 inc GST (D508) SHEET METAL STEP DRILL SET HSS M2 Bright Finish 4-12 x 1mm, 6-20 x 2mm, 6-30 x 2mm 70 77 inc GST (D1071) ENGINEERS FILES Cushion grip handle 250mm Length Files Type Grade Flat Course (F120) Flat Second Cut (F121) Flat Smooth (F122) Half Round Course (F124) Half Round Second Cut (F125) Half Round Smooth (F126) Round Course (F127) Round Second Cut (F128) Round Smooth (F129) 12 13.20 12 13.20 12 13.20 12 13.20 12 13.20 12 13.20 12 13.20 12 13.20 12 13.20 HOLE SAW SET - HSS Bi-Metal high speed steel 11 Sizes: 19, 22, 25, 32, 35, 38, 44, 51, 57, 64, 76mm Includes 3/8" & 1/2" shank arbors Pilot drill & spring HOLE SAW SET - Carbide 8 Piece Carbide Tipped Heat resistant carbide teeth for long life Suitable for stainless steel, steel, fibre glass, and glass reinforced products Range: 16, 20, 22, 25, 28, 30, 32, 35mm 2MT SHANK DRILL SET 100% HSS flute length Sizes: 14.5, 15, 16, 17, 18, 19, 20, 21, 22, 23mm REDUCED SHANK DRILL SETS - 8 piece High speed steel M2 grade 100% flute length 118º point angle Range: 13-25mm Shank Ø13mm 128 140.80 inc GST (D1171) 9/16" - 1" Range Shank Ø1/2" 128 140.80 inc GST (D1181) 99 108.90 inc GST (D102) INDUSTRIAL DRILL SETS Precision ground flutes HSS M2 bright finish 118º split point centre 25 PCE METRIC 1-13mm (x 0.5mm) 80 88.00 inc GST (D1271) 29 PCE IMPERIAL 1/16" - 1/2" (x 1/64") 82 90.20 inc GST (D1281) Precision ground flutes HSS M2 bright finish 51 PCE METRIC 1-6mm (x 0.1mm) 90 99 inc GST (D1285) 90 99 inc GST (D108) INDUSTRIAL DRILL BIT PACKS Industrial M2 grade high speed steel Ground flutes 118º split point Size Qty 1.0mm 6 (D8010) 12 13.20 1.5mm 6 (D8015) 12 13.20 2.0mm 6 (D8020) 12 13.20 2.5mm 6 (D8025) 12 13.20 3.0mm 6 (D8030) 12 13.20 3.5mm 6 (D8035) 12 13.20 4.0mm 6 (D8040) 12 13.20 4.5mm 6 (D8045) 12 13.20 5.0mm 5 (D8050) 12 13.20 5.5mm 5 (D8055) 12 13.20 6.0mm 5 (D8060) 12 13.20 6.5mm 5 (D8065) 12 13.20 Size 180 198 inc GST (D122) Qty 7.0mm 4 (D8070) 12 13.20 7.5mm 4 (D8075) 12 13.20 8.0mm 3 (D8080) 12 13.20 8.5mm 3 (D8085) 12 13.20 9.0mm 2 (D8090) 12 13.20 9.5mm 2 (D8095) 12 13.20 10.0mm 2 (D8100) 12 13.20 10.5mm 2 (D8105) 12 13.20 11.0mm 1 (D8110) 12 13.20 11.5mm 1 (D8115) 12 13.20 12.0mm 1 (D8120) 12 13.20 12.5mm 1 (D8125) 12 13.20 MORSE TAPER SHANK DRILLS High Speed Steel Made to DIN345 standard Ø(mm) 12.5 1MT (D300) 13 14.30 13 1MT (D301) 13 14.30 13.5 1MT (D302) 15 16.50 14 1MT (D303) 17 18.70 14.5 2MT (D304) 17 18.70 15 2MT (D305) 18 19.80 15.5 2MT (D306) 18 19.80 16 2MT (D307) 19 20.90 16.5 2MT (D308) 20 22.00 17 2MT (D309) 20 22.00 17.5 2MT (D310) 20 22.00 18 2MT (D311) 22 24.20 18.5 2MT (D312) 22 24.20 19 2MT (D313) 23 25.30 19.5 2MT (D314) 25 27.50 20 2MT (D315) 26 28.60 20.5 2MT (D316) 29 31.90 21 2MT (D317) 30 33.00 Size Qty 21.5 2MT (D318) 31 34.10 22 2MT (D319) 33 36.30 22.5 2MT (D320) 37 40.70 23 2MT (D321) 38 41.80 23.5 3MT (D322) 39 42.90 24 3MT (D323) 39 42.90 24.5 3MT (D324) 40 44.00 25 3MT (D325) 40 44.00 25.5 3MT (D326) 40 44.00 26 3MT (D327) 47 51.70 26.5 3MT (D328) 47 51.70 27 3MT (D329) 48 52.80 27.5 3MT (D330) 49 53.90 28 3MT (D331) 50 55.00 28.5 3MT (D332) 52 57.20 29 3MT (D333) 58 63.80 29.5 3MT (D334) 58 63.80 30 3MT (D335) 67 73.70 Specifications, prices & availability are subject to change without notice. Prices do not include freight. 5

WORKSHOP Series TOOL CHEST & ROLLER CABINET Ball bearing slides Lockable by key Powder coated quality finish 6 Drawer Tool Chest 60 x 26 x 34cm (L x W x H) INDUSTRIAL TOOL BOXES ITB-3036 - (SET OF 2) 775 x 430 x 310 (30" box) 915 x 440 x 570 (36" box) Powder coated finish Lifting handles Box section - forklift access (36") Gas strut lid support (36") 2 x Security lock system (36") Single Latch Lock (30") 90 99 inc GST (T690) 200 5 Drawer Roller Cabinet 61.6 x 33 x 76.2cm (L x W x H) 220 inc GST (T736A) 180 198 inc GST (T695) TRADE Series TOOL CHESTS & ROLLER CABINETS ITB-48 1220 x 630 x 700mm (L x W x H) Lifting handles Dual gas strut lid support 2 x Security lock system Powder coated finish Box section for forklift access Heavy duty ball bearing slides Lockable by key Protective drawer liners Powder coated quality finish Ideal for home hobbyist or tradesmen A 6 Drawer Tool Chest 67 x 31 x 37.5cm (L x W x H) B 360 150 165 inc GST (T700) A 396 inc GST (T738) 3 Drawer Tool Chest 67 x 31.5 x 26.5cm (L x W x H) 95 104.50 inc GST (T701) B C UTE-1450 TOOL BOX 1.8mm aluminium checker plate Full length stainless steel piano hinges Dual heavy duty gas struts to open lid 2 Key lockable latches with weatherproof seal Water and dust resistant rubber seals Includes built in top shelf inside 12 Drawer Tool Chest 67 x 44.5 x 49.5cm (L x W x H) 290 319 inc GST (T706) D D 7 Drawer Roller Cabinet 68.5 x 47 x 100cm (L x W x H) C 320 352 inc GST (T715) C 450 495 inc GST (T742) 6 Specifications, prices & availability are subject to change without notice. Prices do not include freight.

MAY - JULY 2013 PSC-3T PLASTIC SERVICE CART Moulded storage trays ideal for spanners & tools 3 plastic trays (790 x 440 x 70mm) Ø127mm wheels (2 swivel & 2 fixed wheels) 250kg total load rating, approx 83kg per tray Includes 1 plastic storage tray handle that attaches to either side of cart Additional handle storage tray can be used on other side (T748A) SDC-2D SERVICE CART 2 x push handles Top table pulls apart for tool access 2 drawers with ball bearing slides Key lockable top pull apart section Powder coated finish Open bottom tray for large tools 2 swivel with brake and 2 fixed wheels External dim. L 930x W 530 x H 955mm Weighs 43kg FLEXI-RACK SHELVING Modular upright design 455kg capacity per shelf Dimensions (L x W x H) 1040 x 430 x 1830mm Durable powder coated finish 4 shelves made from 15.87mm thick particle board Industrial grade steel Single Unit Configurations Multiple Unit Configurations 135 148.50 inc GST (T748) 250 275 inc GST (T754) 160 176 inc GST (S013) SR-DSL MOBILE STORAGE SHELVING SYSTEM 3 x shelves - adj. height 1 x square hole panel 2 x louvered panels 300kg load capacity Handle either side Large base for extra storage 2 x swivel brake wheels & 2 x fixed wheels Powder coated grey finish Dimensions (L x W x H): 886 x 650 x 1405mm A430 A432 A434 A436 Optional Plastic Buckets 105 x 110 x 50mm (A430) 3 3.30 105 x 140 x 75mm (A432) 4 4.40 140 x 220 x 125mm (A434) 9 9.90 140 x 270 x 125mm (A436) 12 13.20 RSS-4WS INDUSTRIAL RACKING STEEL SHELVING 364kg capacity per shelf Adjustable 4 x heavy-duty zinc plated wire shelves Multi-use storage: Great for heavy loads in the office or garage, retail, factory and warehouse Vertical posts have double sided punched holes to add on additional shelving A440 A442 A444 A446 A448 Optional Hooks & Holders Shown with optional accessories 350 385 inc GST (T790) Single Hook 75mm long (A440) 2.50 2.75 Double Hook 75mm long (A442) 3 3.30 Plier Holder - 3 Prong 150mm long (A444) 4 4.40 Spanner Holder - 135mm long (A446) 9 9.90 Screwdriver Holder - 390mm long (A448) 12 13.20 250 275 inc GST (S014) Optional Extra Shelf Extension 180 198 inc GST (S014A) MOBILE STORAGE BIN RACKS Heavy duty plastic bins, ideal for storing parts, washers, screws, bits, bolts, o'rings, rivets, for assembly lines, workshops & garages Zinc plated wire shelving with bin locating guides Steel frame with silver powder coated finish Quick & easy clip together assembly with adjustable shelves 4 or 6 x Ø100mm swivel caster wheels (2 x lockable) BUCKET TYPES Max. Loading 20kg Max. Loading 28kg 22 BINS 36 BINS 72 BINS Max. Loading 30kg SR-22 880 x 410 x 950mm 190 209 inc GST (S020) SR-36 880 x 410 x 1705mm 350 385 inc GST (S021) SR-72 1740 x 410 x 1705mm 650 715 inc GST (S022) Specifications, prices & availability are subject to change without notice. Prices do not include freight. 7

MICROMETERS - Outside Micrometers OUTSIDE MICROMETERS With interchangeable anvils Now there is an alternative VERNIER CALIPERS - Standard ±0.03 accuracy 32-194 Code Range Accuracy inc GST 10-101 0-1" 0.004mm 30 33.00 10-103 1-2" 0.004mm 38 41.80 10-106 2-3" 0.005mm 40 44.00 10-109 3-4" 0.005mm 60 66.00 10-102 0.25mm 0.004mm 30 33.00 10-105 25-50mm 0.004mm 38 41.80 10-107 50-75mm 0.005mm 40 44.00 10-110 75-100mm 0.005mm 60 66.00 MICROMETERS - Outside Micrometers Code Range Accuracy inc GST 20-120 Code Range Accuracy inc GST 20-120 100-200mm 0.007mm 267 293.70 20-123 200-300mm 0.009mm 275 302.50 MICROMETER SETS 20-111 Code Qty Range Accuracy inc GST 20-111 3 0-75mm 0.01mm 110 121.00 20-114 4 0-100mm 0.01mm 146 160.60 MICROMETER SETS Code Range Graduations inc GST 32-194 0-150mm 0.02mm 49.00 53.90 32-1941 0-200mm/8" 0.02mm/0.001" 55.91 61.50 VERNIER CALIPERS - Thumb Lock ±0.03 accuracy Code Range Graduations inc GST 32-193 0-150mm/6" 0.02mm / 0.001" 69 75.90 VERNIER CALIPERS Fine Adjustment 32-1945 Code Range Graduations inc GST 32-1945 0-130mm/5" 0.02mm/0.001" 50 55.00 32-1946 0-180mm/7" 0.02mm/0.001" 60 66.00 32-1947 0-280mm/11" 0.02mm/0.001" 99 108.90 HEAVY DUTY - VERNIER CALIPERS 12-315 100-125mm 0.006mm 12-316 125-150mm 0.006mm 12-317 150-175mm 0.007mm 12-320 175-200mm 0.007mm 12-321 200-225mm 0.008mm 12-322 225-250mm 0.008mm 12-323 250-275mm 0.009mm 12-324 275-300mm 0.009mm OUTSIDE MICROMETERS With interchangeable anvils 77 84.70 88 96.80 95 104.50 110 121.00 130 143.00 136 149.60 146 160.60 160 176.00 20-115 Code Qty Range Accuracy inc GST 20-115 6 0-150mm 0.01mm 288 316.80 20-117 6 0-6" 0.0001" 288 316.80 Code Range Graduations inc GST 32-195 0-200mm/8" 0.02mm/0.001" 99 108.90 32-196 0-300mm/12" 0.02mm/0.001" 189 207.90 DIAL CALIPERS Code Range Graduations inc GST 33-190 0-6" 0.001" 80 88.00 33-191 0-150mm 0.02mm 80 88.00 33-192 0-200mm 0.02mm 110 121.00 MICROMETER SET DIGITAL CALIPERS Splash Proof Code Range Accuracy inc GST 20-340 300-400mm 0.011mm 355 390.50 20-350 400-500mm 0.013mm 418 459.80 20-360 500-600mm 0.015mm 470 517.00 20-370 600-700mm 0.016mm 599 658.90 20-380 700-800mm 0.018mm 675 742.50 20-390 800-900mm 0.020mm 795 874.50 20-391 900-1000mm 0.020mm 920 1,012.00 20-420 1000-1200mm 0.020mm 1,266 1,392.60 MICROMETER SET Code Qty Range Accuracy inc GST 20-116 4 0-4" 0.0001" 139 152.90 Code Qty Range Accuracy inc GST 20-118 6 150-300mm 0.01mm HEAVY DUTY - VERNIER CALIPERS 33-197 & 33-1985 are long jaw models 490 539 Code Range Graduations inc GST 33-197 450mm/18" 0.02mm/0.001" 299 328.90 33-198 600mm/24" 0.02mm/0.001" 295 324.50 33-1985 600mm/24" 0.02mm/0.001" 299 328.90 33-199 1000mm/40" 0.02mm/0.001" 650 715.00 33-1995 1500mm/60" 0.02mm/0.001" 1,360 1,496.00 33-1996 2000mm/78" 0.02mm/0.001 2,400 2,640.00 Code Size Resolution inc GST 31-180 150mm/6" 0.01mm/0.005" 89 97.90 31-181 200mm/8" 0.01mm/0.005" 115 126.50 31-182 300mm/12" 0.01mm/0.005" 169 185.90 COOLANT PROOF DIGITAL CALIPERS Coolant Proof Code Size Resolution inc GST 31-1851 150mm/6" 0.01mm/0.005" 160 176.00 31-1861 200mm/8" 0.01mm/0.005" 180 198.00 31-1871 300mm/12" 0.01mm/0.005" 245 269.50 DIGITAL CALIPERS - LARGE 31-188 31-1885 31-189 Code Range Graduations inc GST 31-188 600mm/24" 0.01mm/0.0005" 450 495.00 31-1885 1000mm/40" 0.01mm/0.0005" 495 544.50 31-189 1500mm/60" 0.01mm/0.0005" 1,500 1,650.00 8 Specifications, prices & availability are subject to change without notice. Prices do not include freight.

MAY - JULY 2013 Now there is an alternative DIAL INDICATORS - Precision Jewel movement 34-213 34-214 34-215 Code Range Grad. Face Ø inc GST 34-213 0-5mm 0.01mm 40mm 34-214 0-10mm 0.01mm 60mm 34-215 0-30mm 0.01mm 60mm 69 75.90 69 75.90 79 86.90 DIAL INDICATORS - Micron Smooth 10 jewel movement Flat glass 34-216 Code Range Grad. Face Ø Acc. inc GST 34-216 0-12.7mm 0.002mm 57mm 2µm 149 163.90 34-222 0-1mm 0.001mm 57mm 1µm 147 161.70 DIAL INDICATORS 34-211 COMBINATION SETS - STANDARD 35-200 Code Range inc GST 35-200 300mm/12" 89 97.90 35-200A 300mm 89 97.90 DIAL TEST INDICATORS (Economy) Code Range Grad. inc GST Code Range Grad. Face Ø inc GST 34-211 0-10mm 0.01mm 58mm 49 53.90 COMBINATION SET - HIGH ACCURACY 34-217 0-0.8mm 0.01mm 89 97.90 34-217 34-212 0-1" 0.001" 58mm 49 53.90 34-2171 0-0.03" 0.0005" 89 97.90 MICRON DIAL TEST INDICATOR Din accuracy Code Range Grad. inc GST 34-223 0-1mm 0.001mm 210 231 DIGITAL INDICATORS 34-2205 Code Range Grad. inc GST 34-2205 0-12.7mm 0.01mm 109 119.90 34-221 0-50mm 0.01mm 250 275.00 34-221 Code Size inc GST 35-2005 12"/300mm 110 121 FEELER GAUGE Code Thickness inc GST Range 70-616 0.03-1.0mm 16 17.60 SCREW CUTTING GAUGE - 4 thread forms Code Thread Forms inc GST 70-612 4 10 11 THREAD GAUGE 28 Imperial / 24 Metric 55 & 60º 70-610 14 15.40 RADIUS GAUGES Internal / External Code Range inc GST 20 22.00 28 30.80 70-614 1-7mm 70-615 7.5-15mm SCRIBERS GRANITE SURFACE PLATE Code Size 38-810 600 x 600 x 100mm inc GST 700 770 ENGINEERS SQUARES Grade B Code Blade inc GST 70-644 75mm 27 29.70 70-645 100mm 35 38.50 70-646 150mm 39 42.90 70-647 225mm 60 66.00 POCKET PROTRACTOR 150mm Stainless steel protractor 70-601 26 28.60 SPRING CALIPERS & DIVIDERS Now there is an alternative DIGITAL PROTRACTOR Resolution Range 0.1º 360º (4 x 90º) 35-204 110 121 REFRACTOMETER - BRIX 0-18 With automatic temperature compensation (ATC) Scale: 0-18 Brix 70-670 180 198 STRAIGHT DIAL TEST INDICATOR HOLDER Code Shank Dia. Reach inc GST 38-438 4 76mm 22 24.20 1/2 ROUND DIAL INDICATOR HOLDER 38-437 22 24.20 MAGNETIC BASES HOLDER ONLY Code Type 70-630 Double Ended Scriber 190mm 70-631 Pocket Scriber 145mm RULERS inc GST 9 9.90 19 20.90 70-634 Code Type inc GST 70-634 Dividers 9 9.90 70-635 Inside 9 9.90 70-636 Outside 9 9.90 70-635 70-636 38-430 38-435 38-4351 38-436 Code Reach inc GST 1-Lock Clamp 38-430 130mm 85 93.50 Code Size inc GST 70-620 150mm/6" 6 6.60 70-621 300mm/12" 13 14.30 70-622 600mm/24" 19 20.90 70-623 1000mm/40" 24 26.40 TELESCOPIC GAUGE SET 6 Piece, 8-150mm capacity 70-618 50 55.00 Fine Adjustment Clamp 38-435 300mm Fine Adjustment Clamp 38-4351 300mm Fine Adjustment Clamp 38-436 330mm 60 66.00 60 66.00 109 119.90 Specifications, prices & availability are subject to change without notice. Prices do not include freight. 9

BS-5S BAND SAW BS-7DS BAND SAW BS-10LS BAND SAW 200 x 125mm (WxH) rectangle capacity 0.375kW / 1/2hp, 240V motor 45º swivel head for easy angle cutting 680mm table working height 3 blade speeds, 20-29-50M/min. Automatic electric cut-out switch Sealed worm and pinion gearbox drive Includes vertical cutting table 215 x 178mm (W x H) rectangle capacity 0.75kW / 1hp, 240V motor Adjustable hydraulic cylinder for auto feed Swivelling head & sliding vice Dual mitre cutting to 45º Built-in coolant system 4 speed (24-41-61-82mpm) Limit switch stops machine when cut is complete 468 x 250mm (W x H) rectangle capacity 1.5kW / 2hp, 415V motor 250mm round capacity Variable speed cutting (18-102mpm) Heavy duty gearbox drive Coolant system Rack type quick action vice & length stop 520 572 inc GST (B003) 1,590 1,749 inc GST (B008A) 3,690 4,059 inc GST (B021) BLADES TO SUIT: Blades to suit: BS-5S Type TPI Material Carbon 6 Solid Steel (B206) 11 12.10 Carbon 14 Medium Steel (B207) 11 12.10 Carbon 18 Thin Wall Steel (B208) 11 12.10 Blades to suit: BS-7DS Type TPI Solid Section Carbon 6 51-80mm (B210) 18 19.80 Carbon 8 31-50mm (B212) 18 19.80 Carbon 10 16-30mm (B214) 18 19.80 Carbon 14 10-15mm (B216) 18 19.80 Bi-Metal 4-6 51-80mm (B400) 44 48.40 Bi-Metal 6-10 16-30mm (B404) 44 48.40 Bi-Metal 10-14 Up to 10mm (B408) 44 48.40 Blades to suit: BS-10LS Type TPI Solid Section Bi-Metal 4-6 51-80mm (B560) 75 82.50 Bi-Metal 6-10 16-30mm (B562) 75 82.50 Bi-Metal 10-14 Up to 10mm (B564) 75 82.50 ROLLER CONVEYOR & STANDS 20 zinc plated rollers at 150mm pitch Rollers are ø48.3mm with commercial bearings Lengths are pre-assembled with 7 cross-members Frames are pre-drilled at 75mm pitch to accept 39 rollers Roller capacity of 70kg each Frames are powder coated Stand (L816) Conveyor (L812) ROLLER CONVEYOR: COMES WITH 20 ROLLERS QUALITY MATTERS Frame Length Height Width (W) (L) (H) 290mm 3000mm 80mm (L812) 270 297 450mm 3000mm 80mm (L818) 320 352 600mm 3000mm 80mm (L824) 360 396 CONVEYOR STANDS: Frame Height To Suit Width (W) Adj. (H) 290mm 505-800mm Band Saw (L816) 290mm 715-1050mm Cold Saw (L814) 450mm 715-1050mm Cold Saw (L820) 450mm 505-800mm Band Saw (L822) 600mm 505-800mm Band Saw (L828) EXTRA CONVEYOR ROLLERS: FRAME (L) (L1) (D) (d) WIDTH (W) 290mm 250mm 222mm 48.3mm M8 (L812A) 450mm 415mm 380mm 48.3mm M8 (L818A) 600mm 560mm 530mm 48.3mm M8 (L824A) Includes measuring tape Mounting nuts & bolts not supplied Easily fitted to conveyor by drilling 4 holes 3 metre length of aluminium extrusion with T-slots for easy mounting Designed specifically to suit (L812) 290mm x 3 metre roller conveyor Length stop has quick-action clamp coupled with a heavy duty roller bearing 80 88 80 88 80 88 80 88 80 88 LENGTH STOP (290mm x 3 Metre) (L800) SUITS: 290mm ROLLER CONVEYOR (L812) 10 11.00 12 13.20 15 16.50 Length Stop 390 429 inc GST (L800) 10 Specifications, prices & availability are subject to change without notice. Prices do not include freight.

MAY - JULY 2013 CURVING ROLLS PB-4 PANBRAKE SG-41 TREADLE GUILLOTINE 1000mm x 1.2mm Mild steel capacity 50mm Roll diameter Cast-iron construction Ground rolls with wiring grooves Quick action swivel top roller Includes stand 1220 x 1.2mm capacity Steel fabricated construction Oiling points on bearing areas Has a range of finger widths to enable the bending of pans or boxes Includes stand 1320 x 1.2mm capacity Strong cast-iron construction 700mm backgauge with fine adjustment Front sheet support 680 748 inc GST (S270) 900 990 inc GST (S250) 1,550 1,705 inc GST (S602) PN1/2-2 PIPE & TUBE NOTCHER ATTACHMENT Suits most conventional drilling machines 2" (51mm) tube capacity Uses standard hole-saws Cuts at angles of up to 45º with graduated scale Note: hole-saw cutters sold separately MANUAL PIPE NOTCHERS Up to 3mm wall thickness 4 bolt holes to secure notcher Comes with extension handle N-16 SHEET METAL NOTCHER 150 x 150mm capacity Ideal for a wide range of sheet metal jobs Maximum 1.6mm capacity Cuts to 150mm x 150mm at 90º Stroke on ram 20mm Bottom blades have 4 cutting edges Adjustable guides Cast base & body insures extreme rigidity & durability Weight 95kg Model Pipe Size 130 143 inc GST (P090) PN-12 1/4", 3/8", 1/2" (P094) 190 209 PN-32 3/4", 1", 1 1/4" (P095) 270 297 PN-50 1 1/2", 2" (P096) 390 429 490 539 inc GST (S247) Stand 200 220 inc GST (S247A) HAND SHEARS Heavy duty steel fabricated High carbon high chrome steel blade Adjustable material return clamp HAND SHEARS Heavy duty steel fabricated High quality hardened blades Spring return handles P/6 HAND PUNCH Ø10mm Maximum capacity 6mm Mild Steel thickness capacity 80mm throat Includes 10mm punch & die 12kg weight 250 275 inc GST (P108) Thick Blade Cap. Length 4mm 150mm (S186) 90 99 5mm 300mm (S188) 150 165 Thick Blade Cap. Length 5mm 160mm (S189) 160 176 6mm 200mm (S191) 270 297 6mm 300mm (S193) 360 396 8mm 200mm (S195) 630 693 Spare Punch & Dies: Type Range Punch 2-10mm (P200) 29.09 32.00 Punch 11-18mm (P211) 54.00 59.40 Die 2.2-18.5mm (P200A) 39.09 43.00 Specifications, prices & availability are subject to change without notice. Prices do not include freight. 11

RR-10 MANUAL RING ROLLING MACHINE 50 x 10mm Flat bar cpacity Hardened 98mm top & 118mm bottom rolls 30mm heat treated drive shaft Cast iron housing on heavy duty stand Gear driven rolls Bottom rolls are knurled for additional grip on material Manual screw adjustment of top roller Standard flat & angle rolls are included *Additional dies are required to roll round bar, round pipe/tube & square tube RR-24 SECTION & TUBE ROLLING MACHINE 16mm-76mm tube ring rolling machine 50 x 1.6mm square tube capacity 0.5-2mm tube wall thickness Bends thin wall mild steel/stainless steel, round, square & rectangular tube into circular or radius curves Roving foot pedal control with emergency stop 1.1kW / 1.5hp 240V motor INCLUDES: 9 Round tube dies - 16, 19, 22, 25, 32, 38, 51, 63, 76mm 8 Square tube dies - 16, 19, 22, 25, 30, 38, 40, 50mm ELECTRIC PIPE & TUBE BENDERS (240V) Digital control panel, 50 programs, 9 bends/program Electric brake and automatic return to stop 210º maximum bending angle Included pipe formers: 1/2", 3/4", 1" NB (TB-42) 1/2", 3/4", 1", 1 1/4" NB (TB-60) TB-42 38 x 2mm Tube cap. 1" NB Pipe cap. 3,150 3,465 inc GST (T604) TB-60 51 x 2mm Tube cap. 1 1/4" NB Pipe cap. 3,950 4,345 inc GST (T606) 990 1,089 inc GST (S681) MPB-2SH HYDRAULIC PIPE BENDER 1/2" - 2" Complete with 6 pipe formers to suit (1/2", 3/4", 1", 1 1/4", 1 1/2", 2" water pipe) Quick action flip over top frame 3 cast wheels, rear wheel swivels Spigot size 31.8mm 2 Stage pump Designed to work horizontally Hydraulic ram - requires less effort to bend pipe than bottle jack 1,590 1,749 inc GST (S682) LS-20 LOCKSEAMER 0.4-1mm Mild steel capacity Dual station fitted with pittsburgh rolls & double seam rolls Positive lubrication to all moving parts through grease nipples Power flanger fitted to top of machine Forming speed 5m/min maximum Reinforced steel plate stand Hardened material guides 1.1kW / 1.5HP 240V motor Optional Tube Formers: Suits Size TB-42, TB-60 25.4, 31.8, 38mm (T610) 999 1,089 TB-60 51mm (T620) 790 869 TBRS-25 TUBE BENDER Suitable for 1.2mm wall thickness in mild steel Includes round formers 3/8",1/2",9/16",5/8",3/4",7/8" Includes square formers 3/4" - 1" square 290 319 inc GST (P064) 3,450 3,795 inc GST (S730) 180 198 inc GST (T055) GRINDER STANDS Suits grinders 150-200mm (G180 & G181) Suits grinders 150-250mm (G181S) BENCH GRINDERS Full cast iron base Dust chutes Adjustable tool rests & eye shields UB-100 BAR BENDER COLD BENDING Flat: 100x5mm Square: 16x16mm Round: Ø18mm Angle Steel: 60x8mm Wheel Ø Motor 240V 415V inc GST 80 88 inc GST (G180 or G181) 120 132 inc GST (G181S) 200mm 1hp (G161) (G161A) 250 275 250mm 1.3hp (G162) (G162A) 450 495 200 220 inc GST (B043) 12 Specifications, prices & availability are subject to change without notice. Prices do not include freight.

MAY - JULY 2013 WORKSHOP HYDRAULIC PRESSES 40 tonne capacity Spring return ram Pneumatic / hydraulic operation Complete with bending plates 50 tonne capacity Spring return ram 2-stage hand pump Winch on table to raise & lower Complete with V-blocks TRADE HYDRAULIC PRESSES Pneumatic/Manual operation (P130M) 1.5kW / 2hp 240V motor (P131M) Adjustable horizontal ram position Heavy duty welded steel fabricated Hydraulic joystick control lever (P131M) Table height winch (P131M) SLIDING RAM HPT-40P 40 Tonne HP-50 50 Tonne HPM-30 30 Tonne HPM-50 50 Tonne Pneumatic/Hydraulic Pneumatic/Hydraulic Motorised Hydraulic HPT-40P 690 HP-50 990 HPM-30 890 HDP-35 3,190 759 inc GST (P149) 1,089 inc GST (P148) 979 inc GST (P130M) 3,509 inc GST (P131M) ARBOR PRESSES Heavy-duty construction Cast iron frame Four-position anvil Square ram 100mm Throat depth 125mm Throat height AP-1 1 Tonne 140mm Throat depth 200mm Throat height AP-2 2 Tonne 150mm Throat depth 320mm Throat height AP-3 3 Tonne 200mm Throat depth 485mm Throat height AP-5 5 Tonne AP-1 AP-2 AP-3 AP-5 80 150 220 650 88 inc GST (P118) 165 inc GST (P119) 242 inc GST (P120) 715 inc GST (P1205) BUSH DRIVER SET Size: 10-12, 12-14, 14-16, 15-17, 16-18, 18-20, 20-22, 22-24, 25-27, 28-30, 30-34, 32-36, 35-40, 38-42mm Driver handle length: 115 & 140 & 160mm Manufactured from aluminium BEARING RACE & SEAL DRIVER SET Includes 9 discs to fit common wheel bearing sizes with the other side of the discs for driving seals Manufactured from aluminium 1 x Extension Discs sizes 39.5, 44.5, 50, 59, 63, 65, 72, 76, 81mm RFM-1500 RUBBER MAT Anti-Fatigue This rubber mat is ideal to reduce fatigue in your legs, feet & back, while standing on hard surfaces for long periods of time. Ideal Applications: In front of your Lathe, Mill, Drill, Grinder, Band Saw, Work Bench or just in the back of your Ute or Truck. Dimensions: 1505 x 905mm Thickness: 8mm Black in colour Tapered edge to reduce tripping Weighs 9.1kg 38 41.80 inc GST (P030) 55 60.50 inc GST (P031) 45 49.50 inc GST (M800) Specifications, prices & availability are subject to change without notice. Prices do not include freight. 13

QUALITY MATTERS OS-58 OSCILLATING VERTICAL BOBBIN SANDER Cast iron table 370 x 290mm Rotating & oscillating action 40mm dust port 0.45kW / 0.6hp, 240V motor 2000rpm sanding spindle speed Oscillating 58 times per minute 1/2", 3/4", 1", 1 1/2", 2" & 3" inserts & sleeves hf-50 BENCH TOP ROUTER Powerful 1500W brush type 240V motor 610 x 360mm Cast iron table 1030 x 360mm table size with extensions Variable speed 8000-24000rpm 0-40mm adjustable spindle height Ø100mm dust chute Includes: mitre guide, 1/4" & 1/2" collets, 2 x push blocks, spindle guard & spanners bts 900x BELT & DISC LINISHER SANDER Quick release for belt change Easy to use belt tracking Vertical or horizontal linishing position Linishing work area 100 x 280mm Ø150mm disc with velcro backing pad & sand paper Tilting table and mitre guide 7.5m/sec belt speed ideal for timber 63mm dust collector port 370 watt induction motor 200 220 inc GST (W843) 290 319 inc GST (W846) 180 198 inc GST (L105) HD12 DUST COLLECTOR Portable on wheels, with conveniently placed handle for easy manoeuvrability 680cfm 100mm(4") x single inlet Quick-action clamp Includes 4 in 1 reducer attachment 100-35mm when all connected, 1 x 100mm - twin 35mm reducer attachment, 2 metres of flexible hose 0.56kW (3/4hp) 240V motor hms 2600ci COMBINATION PLANER THICKNESSER German design & technology Heavy duty machines CAST IRON tables Vulcanised rubber feed system on thickness mode Powerful 3hp motor for constant feed in both hard and soft timbers Cast Iron thickness table adjustment to 1/10mm for super fine finishing 250 x 210mm thickness capacity 100mm dust port Large professional planing fence 3mm stock removal BP-305 BAND SAW 750W / 1hp, 240V motor 305mm throat capacity 548 x 400mm table 175mm height capacity Safety magnetic switch with emergency stop Quick action blade tension system 2 x blade speeds Adjustable bearing blade guides Aluminium rip fence with quick action lock 100mm dust collector port Heavy duty adjustable aluminium fence Mitre guide & fence can be used on either side of blade 170 187 inc GST (W886) 1,390 1,529 inc GST (W850) 390 429 inc GST (W4202) TS250RS PANEL SAW TH-410 THICKNESSER MBS500 BAND SAW 254mm diameter saw blade with 45 tilting arbour Aluminium sliding work table with 1250mm travel 80mm @ 90º, 54mm @ 45º depth of cut Fence includes adjustable flip over stop 1.5kW / 2hp, 240V motor 800 x 620mm work table 600mm ripping capacity Aluminium extrusion rip fence 100mm & 30mm dust extraction outlets Large 407 x 225mm capacity Enclosed sides around cutter head for additional safety Heavy-duty 2.25kW / 3hp 240V motor 3 knives Ø70mm cutter block system, 5300rpm Heavy duty cast iron table 600 x 415mm 120mm dust extraction outlet In-feed & out-feed support arms with 3 material rollers Variable feed speed system between 5-7m/min 4mm maximum depth of cut via hand wheel with digit height counter 1500W/ 2hp 240V motor Safety magnetic switch with emergency stop Blade guards with safety micro-switches 1-Piece steel fabricated frame Roller blade guides 2 blade speeds, 380 & 800m/min Quick-release blade tension mechanism Rack & pinion adjustment on top blade guide Cast iron table tilts to 45 Twin 100mm dust chutes Includes: Mitre guide Quick Lock Rip fence Mobile wheel kit 1,490 1,639 inc GST (W688) 1,490 1,639 inc GST (W680) 1,490 1,639 inc GST (W691) 14 Specifications, prices & availability are subject to change without notice. Prices do not include freight.

MAY - JULY 2013 T-318 THICKNESSER Ideal portable machine 2kW / 2.7hp 240V motor 318mm x 160mm timber capacity Power timber feed rollers 4 post design Anti-Kick back fingers Two double sided blades with quick action change and blade setting jig Extension tables Includes 100mm dust chute A dust collector is required with this thicknesser PT-6 PLANER JOINTER 150mm width capacity 0.75kW / 1hp, 240V motor 3 blade cutter head Long 1210mm cast iron table with 13mm rebating Rigid quick action tilting fence to 45 with adjustable stops Magnetic safety switch with raised emergency stop button Spring loaded blade guard Adjustable in & out feed tables Quick action lever enables height adjustment for infeed table Includes sturdy wide foot print stand & Ø100mm dust chute PT-300 COMBINATION PLANER THICKNESSER Heavy-duty 2.25kW / 3hp 240V 304mm wide x 220mm high thicknesser capacity Auto-feed thicknesser rollers 5m/min 5500rpm cutter head speed 1510 x 400mm jointer table size Large aluminium fence tilts 45-90º with 4-way locking system and unique sliding design Four blades on Ø78mm cutter head 100mm dust chute Heavy duty cast iron table 360 Optional Stand 50 55 inc GST (W801) 450 1,850 Optional Morticing Attachment 225 247.50 inc GST (W615) 396 inc GST (W800) 495 inc GST (W619) 2,035 inc GST (W613) SB-12 TABLE SAW SB-10H TABLE SAW ST-250 TABLE SAW Ideal saw bench for home workshop Large 510 x 686mm cast iron table, 1030 x 686mm with side extensions 100mm depth of cut at 90, 80mm depth of cut at 45 Dust proof magnetic switch Tilt arbor to 45 Powerful 2.2kW / 3hp 240V induction motor with thermal overload Includes 300mm TCT saw blade, 100mm dust outlet, heavy duty rip fence with micro-adjustment, operated left or right of blade Saw Bench with large 560 x 800mm cast iron table 1170 x 800mm with side extensions Includes 254mm TCT saw blade 100mm dust port 75mm depth of cut at 90º, 60mm depth of cut at 45º Dust proof magnetic switch Tilt arbor to 45º Powerful 2250W, 240V induction motor Includes heavy duty rip fence with micro-adjustment, operated left or right of blade Dust extraction at the top of the blade as well as 100mm chute from the enclosed stand Cast iron work table Rise and fall spindle 1250mm travel sliding table with mitre guide & work clamp 75mm depth of cut 100mm dust port Dust proof magnetic switch 254mm diameter saw blade with 45 tilting arbor Powerful 2.2kW / 3hp 240V induction motor Includes heavy duty rip fence with micro-adjustment, operated left or right of blade 790 869 inc GST (W452) 1,050 1,155 inc GST (W453) 1,290 1,419 inc GST (W450) MBW-2 MOBILE BASE 227kg capacity Stable 4 wheel design 2 wheels with lever action for raising Minimum Square size 279 x 279mm Maximum Square size 894 x 894mm Minimum Rectangle size 434 x 279mm Maximum Rectangle size 1295 x 482mm Perfect for moving machines Steel frames have adjustable holes in 1" increments Weight 17kg PS-1810 PANEL SAW 2.6 kw / 3.5hp 240V motor Ø315mm saw blade has 45 tilting arbor Ø90mm scribe blade 1240mm ripping capacity 2280mm cross cut with adjustable flip over stop Main saw blade speed 4500rpm Precision ground cast iron main table 820 x 800mm with extensions 1260 x 800mm Durable extruded aluminium slide provides extremely smooth traverse, table is 1800 x 270mm wide Includes mitre guide, push stick and overhead guard PS-3200 PANEL SAW 5.5kW / 7.5hp 415V main motor with 0.75kW / 1hp scoring motor 2 speed main saw blade 4000rpm or 6000rpm. Score blade speed 8000rpm Digital readout for blade angle 1250mm ripping capacity with fence 3200mm cross cut with adjustable flip over stop Main saw blade Ø300mm, scoring saw blade Ø120mm Main spindle arbor tilts to 45º Durable extruded aluminium slide provides extremely smooth traverse, table is 3200 x 360mm wide Provisions to attach a dust collection system via gas strut blade guard hood via 100mm ducting 75 82.50 inc GST (W930) 2,250 2,475 inc GST (W700) 5,450 5,995 inc GST (W724) Specifications, prices & availability are subject to change without notice. Prices do not include freight. 15

DIGITAL READOUTS & SCALES Scales Double Seals Design Offers superior oil resistance, high elastic recovery properties and durability. Protection to DIN 40050 & IP53 Aluminium backing plate only supplied with scales up to 500mm Travel Cable Res. Model Length 200mm 3 Mtrs 5µm GS-10 (D720) 199 218.90 250mm 3 Mtrs 5µm GS-10 (D721) 209 229.90 300mm 3 Mtrs 5µm GS-10 (D722) 215 236.50 300mm 5 Mtrs 5µm GS-10 (D722A) 215 236.50 350mm 3 Mtrs 5µm GS-10 (D723) 219 240.90 350mm 5 Mtrs 5µm GS-10 (D723A) 225 247.50 400mm 3 Mtrs 5µm GS-10 (D724) 225 247.50 450mm 3 Mtrs 5µm GS-10 (D725) 225 247.50 500mm 3 Mtrs 5µm GS-10 (D726) 230 253.00 550mm 3 Mtrs 5µm GS-10 (D727) 230 253.00 600mm 3 Mtrs 5µm GS-10 (D728) 235 258.50 700mm 3 Mtrs 5µm GS-10 (D730) 235 258.50 750mm 3 Mtrs 5µm GS-10 (D731) 240 264.00 800mm 3 Mtrs 5µm GS-10 (D732) 240 264.00 900mm 3 Mtrs 5µm GS-10 (D734) 260 286.00 1000mm 5 Mtrs 5µm GS-10 (D736) 265 291.50 1100mm 5 Mtrs 5µm GS-10 (D736A) 410 451.00 1200mm 5 Mtrs 5µm GS-10 (D737) 430 473.00 1300mm 5 Mtrs 5µm GS-10 (D738) 450 495.00 1500mm 5 Mtrs 5µm GS-20 (D739) 525 577.50 1700mm 5 Mtrs 5µm GS-20 (D741) 620 682.00 2000mm 5 Mtrs 5µm GS-20 (D745) 975 1,072.50 3000mm 5 Mtrs 5µm GS-20 (D750) 2,200 2,420.00 Compact Scales - (5µm or 1µm) 100mm 3 Mtrs 5µm GS-30 (D718) 189 207.90 150mm 3 Mtrs 5µm GS-30 (D719) 189 207.90 200mm 3 Mtrs 5µm GS-30 (D720C) 199 218.90 200mm 3 Mtrs 1µm GS-31 (D7622) 275 302.50 250mm 3 Mtrs 5µm GS-30 (D721C) 209 229.90 250mm 3 Mtrs 1µm GS-31 (D7625) 275 302.50 300mm 3 Mtrs 5µm GS-30 (D722C) 219 240.90 300mm 3 Mtrs 1µm GS-31 (D7635) 299 328.90 Scales - High Accuracy (1µm) 200mm 3 Mtrs 1µm GS-11 (D762) 300mm 3 Mtrs 1µm GS-11 (D763) 400mm 3 Mtrs 1µm GS-11 (D764) 500mm 3 Mtrs 1µm GS-11 (D765) 600mm 3 Mtrs 1µm GS-11 (D766) 800mm 3 Mtrs 1µm GS-11 (D767) 275 302.50 299 328.90 319 350.90 369 405.90 389 427.90 550 605.00 Double Seals Design Digital Display Units - Multi Function Multi function display units can be used with either 1µm or 5µm scales. Individual programming allows you to select the following applications Milling, Lathe, Boring, Drilling, Grinding and EDM function during the DRO set up ES14-2x 2-Axis Additional Bracket Kit suits any 3 axis install Type Z-Axis (D770) 59 64.90 7-Piece (D772) 59 64.90 Extension Cable Length 2 Mtrs (D709) 70 77.00 4 Mtrs (D710) 70 77.00 Cable Adaptors Suits DSUB9-DIN7 (D711) DIN7-DSUB9 (D712) 95 104.50 95 104.50 ES12-3x 3-Axis with Graphics ES14-3x 3-Axis Model ES14-2x ES14-3x ES12-3x Code (D7142) (D7143) (D705) No. of Axis 2 3 3 Resolution 1µm or 5µm 1µm or 5µm 1µm or 5µm Radius/Diameter 4 4 4 Multi-Language 4 4 4 Clear Zero 4 4 4 Centring (1/2) 4 4 4 mm / inch Display 4 4 4 Absolute / Incremental 4 4 4 Power Off Memory 4 4 4 199 Sub Datum 4 4 4 Reference Memory 4 4 4 Built in Calculator 4 4 4 Pitch, Circle, Diameter (PCD) 4 4 4 Line Hole Positioning (LHOLE) 4 4 4 Inclined Machining (INCL) 4 4 4 Shrinkage Calculation 4 4 4 Simple "R" Function 4 4 4 Smooth "R" Function 4 4 4 Linear Error Compensation 4 4 4 Non Linear Error Compensation 4 4 4 Vibration Filtering 4 4 4 Z Axis Summation 4 4 4 Axis Speed Display 4 4 4 1, 5, 10 micron Display 4 4 4 450 550 590 inc GST 495 605 649 Specials from: Specifications and prices are subject to change without notice. Prices do not include freight. Prices valid for May - July 2013 16 Specifications, prices & availability are subject to change without notice. Prices do not include freight.