3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III. Easy Installation. High reliability.

Similar documents
JCN cables. The. splice is an

3 Shielded Compact Ribbon (SCR) Wiremount Plug, XX, and Shell Kit, F200-XXX

3M Scotchlok Insulated Electrical Spring Connector B (Blue)

3M Scotchlok Copper/ Aluminum Compression Lugs, Series

3M Power Clamp Wiremount Connectors

3M Locator Plate

HEAVY DUTY COPPER CABLE LUGS

QSLVM2500 QSLV-M Cold Shrink Insulator

3M Shielded Controlled Impedance (SCI) Latch/Eject Header 2 mm Development Kit Instructions

3 Splices. Splices. 5700A-MT Trifurcating Accessory Kit pg. 302 MT-C pg. 302 MT-E pg. 302

Low Voltage Splices 0-600V (1000V rated) Cold Shrink Splices (0-1000V)

3M Dynatel Triple Play Customer Service Test Set INS970

3M Cross-Connect Cabinets 4220SVB, 4220SVC and 4220SVE Cabinet Mounting with Stakes, Installation Guide

3M Add-On Terminal 4220P 400-Pair and Jumper Trough Expanding a 40-Type Cabinet

3M Mini Serial Attached SCSI (minisas) Cable Assembly

3M Mini D Ribbon (MDR) Cable Assembly.050 High Speed Digital Data Transmission System - 26 Position 14X26-SZLB-XXX-0LC

3M 200 Amp Loadbreak Connector System

3M Mini D Ribbon (MDR) Cable Assembly.050 Right-Angle High-Flex Digital Camera Cable 26 position 14H26-SZ3X-XXX-04C

3M Mini D Ribbon (MDR) Cable Assembly.050" High Speed Digital Camera Link Cable Right Angle 14H26-SZLX-XXX-0LC

Signal Integrity Product Specification

Product Data Sheet. 3M SFP+ Direct-Attach Passive Copper Cable Assembly

3M Dynatel Far End Device III

Material: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0. Material: Copper Alloy Plating: See Ordering information

3M Mini D Ribbon (MDR) Cable Assembly.050 High-Flex Digital Camera Extension Cable 26 position 1WL26-TZ3B-XXX-04C

3M No Polish SC/APC Angle Splice Connector Jacket for 2 x 3 mm FRP and 1.6 to 3.0 mm Cable 8802-T/APC/AS/1.6-3

Product Data Sheet. 3M Cable Assemblies for SFP+ Applications, Direct Attach Passive Copper

3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MF26-L5XX-00C-XXX

Signal Integrity Test Report

3M Mini D Ribbon (MDR) Connectors

Scotchlok UR2 Connector

3M Shrunk Delta Ribbon (SDR) Cable Assembly.80 mm High Speed Digital Data Transmission, 26 position 1MG26-LFW0-00C-XXX

installation guide XMFM1

3M Wiremount Socket Series CHG

Low Voltage Splices, 1000 V or less

WSS-M99P48-A3: 3 Foam Performance, PressureSensitive Adhesive Tape. Pressure Sensitive Adhesive Tape (Interior, Exteriorand Underhood Applications)

Product Specification. 3M Cable Assemblies for QSFP+ FDR Applications, Copper

3 Dynatel M Series Locating and Marking System DOCUMENT NEW- TO- THE- WORLD TECHNOLOGY OBSOLETE DAMAGE PREVENTION PIN- POINT ACCURACY SAFETY

3M TM High Routability Internal MiniSAS Cable Assembly, Series 8F36

Far End Device II Model 1342

3M IDC Ribbon Cable Socket. Series 891

Final Polish of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Seiko Instruments SII, OFL-12 and OFL-15 Polishing Machines

3M Clear Track Hallway Fiber Pathway

3M XYZ-Axis Electrically Conductive Adhesive Transfer Tape (ECATT) 9723

3M Contrast Enhancement Film. The. Clear. Advantage. High purity, optical-grade adhesive films for joining transparent materials

Final Polish of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Domaille Engineering Polishing Machines

SolderSleeve One-Step Wire and Cable Terminators. Selection Guide

3M MetPak HSHM Press-Fit Header 2 mm Type E, 200 Signal Contacts, 8 Rows, Straight HSHM Series

PHASE ROTATION METER. Operating and Instruction Manual. a n d A C C E S S O R I E S

Final Polish of Fiber Optic Connectors using 3M Lapping Films 863X and 863XW on Seikoh Giken SFP-550 Polishing Machines

DOCUMENT OBSOLETE. Dynatel. 2273M Cable/Pipe and Fault Locators 2273M-iD Cable/Pipe/Fault and Marker Locators with id Read/Write

Specifications for 3M Dynatel 2273M/M-iD Cable/Pipe and Fault Locators

Schluter -DITRA-HEAT Repair procedure for the DHE-HK Heating Cable

TAG5000 WIRELESS PHASER. Instruction Manual HD ELECTRIC COMPANY 1475 LAKESIDE DRIVE WAUKEGAN, ILLINOIS U.S.A.

Obsolete Document. Dynatel

Technical Bulletin April Opticom GPS System Verifying GPS coverage in a Fire Station

ELECTRICAL CABLE SPLICE KIT. Roctest Limited, All rights reserved.

CURRENT MEARUREMENT SHUNT CS-10/500 USER MANUAL

Digital Lighting Systems, Inc.

4200 JSP, KSP, LSP and MSP Cabinets

POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) CAB-0XXX (SALEM CODE)

C-L-X ARMOR REMOVAL PROCEDURES

Lamination Techniques for Converters

OPERATOR S MANUAL Model 58B Prefeed / Dereeler

Analog Voltage Detector 1-450kV Operating Instructions VDAO450TM. Patent No. 6,275,022

St. Monica Food Pantry Low Voltage (600V and less) Conductors and Cables sys-tek No

Dynatel Cable/Pipe and Fault Locator 2273M Cable/Pipe, Fault and Marker Locator 2273M-iD

Digital Voltage Detector 0-999kV Operating Instructions VD1000PTM

3M High Routability External MiniSAS Cable Assembly 8G26 Series Product Specification Revised

3M Industrial Adhesives and Tapes Division Industrial Bonding Solutions for Woodworking

Installation and Operation Manual MSI. Multi-Sensor Interface Hub. Interface Module for all Sensors Network and Wireless CAUTION

Technical Bulletin April Opticom GPS System. Vehicle connections and configuration to obtain serial GPS data for other devices

3MElectrical Markets Division

DynatelTM Cable Locator. Operators Manual. October Revision A

A1800 ALPHA meter special installation instructions DANGER

HDRo Owner s Manual. 12 Month Limited Warranty. Indoor/Outdoor Amplified HD Radio Antenna

Manual Crimp Tool T&B Catalog Number: TBM4S UPC Number: Status:

A. Product Description: Stranded conductor insulated wire.

MODEL 3810/2 Line Impedance Stabilization Network

Your Performance Partner

3 Scotchmate TM. Polyester Reclosable Fasteners. Product Selection Guide April, M Scotchmate Polyester Reclosable Fastener.

MaxLite LED Self-Driven LiteBars

Dynatel 2250E/2273E Advanced Cable and Fault Locator

AM/FM+ OWNER S MANUAL

BC145 SIGNAL ISOLATOR BOARD

Low Voltage AIRGUARD. A proven, rugged product for harsh environments

Marine Masking Solutions

A1000 ALPHA and A1200 ALPHA Meter Installation Instructions. General. Installation. For A1000 ALPHA Type R, A1000 ALPHA Type C, and A1200 ALPHA Meters

Model 72D Twin Blade Rotary Wire Stripper

3M Abrasive Systems. Sanding made simple.

Operating instructions D-37

Technical Data June, 2008

a Nexans company Catalogue 2009

Cutters. Section. HUBBELL / CHANCE CENTRALIA, MISSOURI Printed in USA FEBRUARY 2009

Issue D. Installation Instructions for the Quadrature Speed and Direction Sensors SNG-Q Series. Sensing and Internet of Things

3M Dual Lock Reclosable Fastener SJ3550

Product Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies

OPERATOR S MANUAL Model 77E Pneumatic Cable Stripper

User s Guide FM Transmitter

9 PIECE TUNGSTEN CARBIDE HOLE SAW KIT. Model 90721

Broadband Current Probe Series Operation Manual

Transcription:

3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III Easy Installation. High reliability.

power cable splicing Revolutionizing with Cold Shrink The 3M Cold Shrink Silicone Rubber Splice QS-III is designed to meet customer demands for easy, consistent installations by virtually eliminating the pushing, pulling or heating required by traditional splices. The QS-III splice features a silicone rubber body which provides excellent electrical properties and superior low temperature handling. Plus the QS-III splice meets or exceeds the requirements of most worldwide standards including IEEE 404 and European CENELEC HD629. 3M Cold Shrink products bring tested reliability to splicing. 3M invented Cold Shrink technology over 40 years ago, so no one knows more about it than we do. The merits and reliability of Cold Shrink products have been proven with years of successful field use and laboratory testing. 3M QS-III splices eliminate heat applied and force fit methods, resulting in safer, more reliable, and lower cost installations. Cold Shrink Benefits No heat, flames or special installation tools required Constant radial pressure enables consistent electrical interfaces Easy, fast and safe installation Symmetrical cable cutback dimensions Allows transitioning of different size cables Suitable for use with most industry-standard connectors 3

Insulation shield Insulation Silicone body provides excellent electrical properties Splice bodies 100% factory-tested One-piece splice body design Splice Features Silicone body provides excellent electrical performance and superior low temperature handling Splice bodies are 100% factory tested One piece splice body design Field-proven technology Meets IEEE 404, Cenelec, and European VDE standards Wide cable range for individual splice bodies Allows easy size transitions within a splice range 3M Cold Shrink Silicone Rubber Splices QS-III come with the components required to make a complete splice for most types of cable and voltages from 5-46 kv. For CN (concentric neutral) or JCN (jacketed concentric neutral) type shielded cables, there are two types of QS-III splice kits. The 5400A series splice kits come with the splice body, a separate one-piece rejacketing tube and the components necessary to splice one cable. The kits can be ordered with or without a connector. The 5400A-WG series splice kits also are for CN or JCN cables. These splice kits have splice bodies, bleeder wires and protective jacket tubes, all loaded on one core for ease of installation and minimal rejacketing. The components, except connectors, necessary to splice one cable are included in the kit. 4

3M Cold Shrink Silicone Rubber Splice QS-III 5 Product UPC* Primary Insulation O.D. Range Conductor Size Connector 15kV CN and JCN cables 5415A 53470-0 0.64-1.01" (16,3-25,7 mm) 2-4/0 AWG (35-95 mm 2 ) None 5415A-2-AL 53471-7 0.64-1.01" (16,3-25,7 mm) 2 AWG 20003 5415A-2-CU 53472-4 0.64-1.01" (16,3-25,7 mm) 2 AWG 10003 5415A-1-AL 53473-1 0.64-1.01" (16,3-25,7 mm) 1 AWG 20004 5415A-1-CU 53474-8 0.64-1.01" (16,3-25,7 mm) 1 AWG 10004 5415A-1/0-AL 53475-5 0.64-1.01" (16,3-25,7 mm) 1/0 AWG 20005 5415A-1/0-CU 53476-2 0.64-1.01" (16,3-25,7 mm) 1/0 AWG 10005 5415A-2/0-AL 53477-9 0.64-1.01" (16,3-25,7 mm) 2/0 AWG 20006 5415A-2/0-CU 53478-6 0.64-1.01" (16,3-25,7 mm) 2/0 AWG 10006 5415A-3/0-AL 53747-3 0.64-1.01" (16,3-25,7 mm) 3/0 AWG 20007 5415A-3/0-CU 53748-0 0.64-1.01" (16,3-25,7 mm) 3/0 AWG 10007 5415A-4/0-AL 53749-7 0.64-1.01" (16,3-25,7 mm) 4/0 AWG 20008 5415A-4/0-CU 53750-3 0.64-1.01" (16,3-25,7 mm) 4/0 AWG 10008 5416A 44092-5 + 0.84-1.38" (21,3-35,1 mm) 4/0 AWG-350 kcmil (95-185 mm 2 ) None 5416A-4/0-AL 44093-2 + 0.84-1.38" (21,3-35,1 mm) 4/0 AWG 20008 5416A-4/0-CU 44094-9 + 0.84-1.38" (21,3-35,1 mm) 4/0 AWG 10008 5416A-250-AL 44096-3 + 0.84-1.38" (21,3-35,1 mm) 250 kcmil 20009 5416A-250-CU 44097-0 + 0.84-1.38" (21,3-35,1 mm) 250 kcmil 10009 5416A-350-AL 44098-7 + 0.84-1.38" (21,3-35,1 mm) 350 kcmil 20011 5416A-350-CU 44099-4 + 0.84-1.38" (21,3-35,1 mm) 350 kcmil 10011 5417A 42124-5 + 1.04-1.70" (26,4-43,2 mm) 350-750 kcmil (185-325 mm 2 ) None 5417A-350-AL 42125-2 + 1.04-1.70" (26,4-43,2 mm) 350 kcmil 20011 5417A-350-CU 44234-9 + 1.04-1.70" (26,4-43,2 mm) 350 kcmil 10011 5417A-500-AL 42126-9 + 1.04-1.70" (26,4-43,2 mm) 500 kcmil 20014 5417A-500-CU 44235-6 + 1.04-1.70" (26,4-43,2 mm) 500 kcmil 10014 5417A-750-AL 04587-8 + 1.04-1.70" (26,4-43,2 mm) 750 kcmil 20019 5417A-750-CU 04588-5 + 1.04-1.70" (26,4-43,2 mm) 750 kcmil 10019 5417A-WG 44090-1 + 1.04-1.70" (26,4-43,2 mm) 350-750 kcmil (185-325 mm 2 ) None 5418A 42128-3 + 1.08-1.70" (27,4-43,2 mm) 500-1000 kcmil (240-500 mm 2 ) None 5418A-500-AL 44403-9 + 1.08-1.70" (27,4-43,2 mm) 500 kcmil 20014 5418A-500-CU 44404-6 + 1.08-1.70" (27,4-43,2 mm) 500 kcmil 10014 5418A-750-AL 42129-0 + 1.08-1.70" (27,4-43,2 mm) 750 kcmil 20019 5418A-750-CU 44236-3 + 1.08-1.70" (27,4-43,2 mm) 750 kcmil 10019 5418A-1000-AL 42130-6 + 1.08-1.70" (27,4-43,2 mm) 1000 kcmil 20024 5418A-1000-CU 44237-0 + 1.08-1.70" (27,4-43,2 mm) 1000 kcmil 10024 5418A-WG 44091-8 + 1.08-1.70" (27,4-43,2 mm) 500-1000 kcmil (240-500 mm 2 ) None *UPC begins with 54007 unless noted otherwise +UPC begins with 51128

Product UPC* Primary Insulation O.D. Range Conductor Size Connector 25/28kV CN and JCN cables 5456A 53793-0 0.84-1.36" (21,3-34,5 mm) 1 AWG-250 kcmil (50-120 mm 2 ) None 5456A-1-AL 53794-7 0.84-1.36" (21,3-34,5 mm) 1 AWG 20004 5456A-1-CU 53795-4 0.84-1.36" (21,3-34,5 mm) 1 AWG 10004 5456A-1/0-AL 53796-1 0.84-1.36" (21,3-34,5 mm) 1/0 AWG 20005 5456A-1/0-CU 53797-8 0.84-1.36" (21,3-34,5 mm) 1/0 AWG 10005 5456A-2/0-AL 53798-5 0.84-1.36" (21,3-34,5 mm) 2/0 AWG 20006 5456A-2/0-CU 53799-2 0.84-1.36" (21,3-34,5 mm) 2/0 AWG 10006 5456A-3/0-AL 53800-5 0.84-1.36" (21,3-34,5 mm) 3/0 AWG 20007 5456A-3/0-CU 53801-2 0.84-1.36" (21,3-34,5 mm) 3/0 AWG 10007 5456A-4/0-AL 53802-9 0.84-1.36" (21,3-34,5 mm) 4/0 AWG 20008 5456A-4/0-CU 53803-6 0.84-1.36" (21,3-34,5 mm) 4/0 AWG 10008 5456A-250-AL 53935-4 0.84-1.36" (21,3-34,5 mm) 250 kcmil 20009 5456A-250-CU 53936-1 0.84-1.36" (21,3-34,5 mm) 250 kcmil 10009 5456A-WG 53804-3 0.84-1.36" (21,3-34,5 mm) 1 AWG-250 kcmil (50-120 mm 2 ) None 5457A 42149-8 + 1.07-1.70" (27,2-43,2 mm) 250-500 kcmil (120-240 mm 2 ) None 5457A-250-AL 53836-4 1.07-1.70" (27,2-43,2 mm) 250 kcmil 20009 5457A-250-CU 53837-1 1.07-1.70" (27,2-43,2 mm) 250 kcmil 10009 5457A-350-AL 42132-0 + 1.07-1.70" (27,2-43,2 mm) 350 kcmil 20011 5457A-350-CU 44238-7 + 1.07-1.70" (27,2-43,2 mm) 350 kcmil 10011 5457A-500-AL 42133-7 + 1.07-1.70" (27,2-43,2 mm) 500 kcmil 20014 5457A-500-CU 44239-4 + 1.07-1.70" (27,2-43,2 mm) 500 kcmil 10014 5457A-WG 43416-0 + 1.07-1.70" (27,2-43,2 mm) 250-500 kcmil (120-240 mm 2 ) None 5458A 42908-1 + 1.24-2.07" (31,5-52,6 mm) 500-1000 kcmil (240-500 mm 2 ) None 5458A-500-AL 04593-9 + 1.24-2.07" (31,5-52,6 mm) 500 kcmil 20014 5458A-500-CU 04594-6 + 1.24-2.07" (31,5-52,6 mm) 500 kcmil 10014 5458A-750-AL 42909-8 + 1.24-2.07" (31,5-52,6 mm) 750 kcmil 20019 5458A-750-CU 44240-0 + 1.24-2.07" (31,5-52,6 mm) 750 kcmil 10019 5458A-1000-AL 42910-4 + 1.24-2.07" (31,5-52,6 mm) 1000 kcmil 20024 5458A-1000-CU 44241-7 + 1.24-2.07" (31,5-52,6 mm) 1000 kcmil 10024 5458A-WG 43417-7 + 1.24-2.07" (31,5-52,6 mm) 500-1000 kcmil (240-500 mm 2 ) None *UPC begins with 54007 unless noted otherwise +UPC begins with 51128 6

3M Cold Shrink Silicone Rubber Splice QS-III Product UPC* Primary Insulation O.D. Range Conductor Size Connector 35kV CN and JCN cables 5467A 43051-3 + 1.07-1.70" (27,2-43,2 mm) 1/0 AWG-350 kcmil (60-185 mm 2 ) None 5467A-1/0-AL 43052-0 + 1.07-1.70" (27,2-43,2 mm) 1/0 AWG 20005 5467A-1/0-CU 43057-5 + 1.07-1.70" (27,2-43,2 mm) 1/0 AWG 10005 5467A-2/0-AL 43053-7 + 1.07-1.70" (27,2-43,2 mm) 2/0 AWG 20006 5467A-2/0-CU 43058-2 + 1.07-1.70" (27,2-43,2 mm) 2/0 AWG 10006 5467A-3/0-AL 43054-4 + 1.07-1.70" (27,2-43,2 mm) 3/0 AWG 20007 5467A-3/0-CU 43059-9 + 1.07-1.70" (27,2-43,2 mm) 3/0 AWG 10007 5467A-4/0-AL 43055-1 + 1.07-1.70" (27,2-43,2 mm) 4/0 AWG 20008 5467A-4/0-CU 43060-5 + 1.07-1.70" (27,2-43,2 mm) 4/0 AWG 10008 5467A-250-AL 43056-8 + 1.07-1.70" (27,2-43,2 mm) 250 kcmil 20009 5467A-250-CU 43061-2 + 1.07-1.70" (27,2-43,2 mm) 250 kcmil 10009 5467A-350-AL 04589-2 + 1.07-1.70" (27,2-43,2 mm) 350 kcmil 20011 5467A-350-CU 04590-8 + 1.07-1.70" (27,2-43,2 mm) 350 kcmil 10011 5467A-WG 53883-8 + 1.07-1.70" (27,2-43,2 mm) 1/0 AWG-350 kcmil (60-185 mm 2 ) None 5468A 43062-9 + 1.24-2.07" (31,5-52,6 mm) 350-1000 kcmil (185-500 mm 2 ) None 5468A-350-AL 43063-6 + 1.24-2.07" (31,5-52,6 mm) 350 kcmil 20011 5468A-350-CU 43067-4 + 1.24-2.07" (31,5-52,6 mm) 350 kcmil 10011 5468A-500-AL 43064-3 + 1.24-2.07" (31,5-52,6 mm) 500 kcmil 20014 5468A-500-CU 43068-1 + 1.24-2.07" (31,5-52,6 mm) 500 kcmil 10014 5468A-750-AL 43065-0 + 1.24-2.07" (31,5-52,6 mm) 750 kcmil 20019 5468A-750-CU 43069-8 + 1.24-2.07" (31,5-52,6 mm) 750 kcmil 10019 5468A-1000-AL 43066-7 + 1.24-2.07" (31,5-52,6 mm) 1000 kcmil 20024 5468A-1000-CU 43070-4 + 1.24-2.07" (31,5-52,6 mm) 1000 kcmil 10024 5468A-WG 53909-5 + 1.24-2.07" (31,5-52,6 mm) 350-1000 kcmil (185-500 mm 2 ) None *UPC begins with 54007 unless noted otherwise +UPC begins with 51128 7

Product UPC* Primary Insulation O.D. Range Conductor Size Connector 15kV LC, wire, tape and UniShield cables 5513A 53480-9 0.64-1.01" (16,3-25,7 mm) 2-4/0 AWG (35-95 mm 2 ) None 5513A-2-AL 53481-6 0.64-1.01" (16,3-25,7 mm) 2 AWG 20003 5513A-2-CU 53482-3 0.64-1.01" (16,3-25,7 mm) 2 AWG 10003 5513A-1-AL 53483-0 0.64-1.01" (16,3-25,7 mm) 1 AWG 20004 5513A-1-CU 53484-7 0.64-1.01" (16,3-25,7 mm) 1 AWG 10004 5513A-1/0-AL 53485-4 0.64-1.01" (16,3-25,7 mm) 1/0 AWG 20005 5513A-1/0-CU 53486-1 0.64-1.01" (16,3-25,7 mm) 1/0 AWG 10005 5513A-2/0-AL 53487-8 0.64-1.01" (16,3-25,7 mm) 2/0 AWG 20006 5513A-2/0-CU 53488-5 0.64-1.01" (16,3-25,7 mm) 2/0 AWG 10006 5513A-3/0-AL 53489-2 0.64-1.01" (16,3-25,7 mm) 3/0 AWG 20007 5513A-3/0-CU 53490-8 0.64-1.01" (16,3-25,7 mm) 3/0 AWG 10007 5513A-4/0-AL 53491-5 0.64-1.01" (16,3-25,7 mm) 4/0 AWG 20008 5513A-4/0-CU 53492-2 0.64-1.01" (16,3-25,7 mm) 4/0 AWG 10008 5514A 44101-5 + 0.84-1.38" (21,3-35,1 mm) 4/0 AWG-500 kcmil (95-240 mm 2 ) None 5514A-4/0-AL 44102-1 + 0.84-1.38" (21,3-35,1 mm) 4/0 AWG 20008 5514A-4/0-CU 44103-8 + 0.84-1.38" (21,3-35,1 mm) 4/0 AWG 10008 5514A-250-AL 44104-5 + 0.84-1.38" (21,3-35,1 mm) 250 kcmil 20009 5514A-250-CU 44105-2 + 0.84-1.38" (21,3-35,1 mm) 250 kcmil 10009 5514A-350-AL 44106-9 + 0.84-1.38" (21,3-35,1 mm) 350 kcmil 20011 5514A-350-CU 44107-6 + 0.84-1.38" (21,3-35,1 mm) 350 kcmil 10011 5514A-500-AL 44407-7 + 0.84-1.38" (21,3-35,1 mm) 500 kcmil 20014 5514A-500-CU 44408-4 + 0.84-1.38" (21,3-35,1 mm) 500 kcmil 10014 5515A 42134-4 + 1.04-1.70" (26,4-43,2 mm) 350-750 kcmil (185-325 mm 2 ) None 5515A-350-AL 42135-1 + 1.04-1.70" (26,4-43,2 mm) 350 kcmil 20011 5515A-350-CU 42898-5 + 1.04-1.70" (26,4-43,2 mm) 350 kcmil 10011 5515A-500-AL 42899-2 + 1.04-1.70" (26,4-43,2 mm) 500 kcmil 20014 5515A-500-CU 42136-8 + 1.04-1.70" (26,4-43,2 mm) 500 kcmil 10014 5515A-750-AL 42900-5 + 1.04-1.70" (26,4-43,2 mm) 750 kcmil 20019 5515A-750-CU 42137-5 + 1.04-1.70" (26,4-43,2 mm) 750 kcmil 10019 5516A 42139-9 + 1.08-1.70" (27,4-43,2 mm) 500-1000 kcmil (240-500 mm 2 ) None 5516A-500-AL 44405-3 + 1.08-1.70" (27,4-43,2 mm) 500 kcmil 20014 5516A-500-CU 44406-0 + 1.08-1.70" (27,4-43,2 mm) 500 kcmil 10014 5516A-750-AL 43254-8 + 1.08-1.70" (27,4-43,2 mm) 750 kcmil 20019 5516A-750-CU 43255-5 + 1.08-1.70" (27,4-43,2 mm) 750 kcmil 10019 5516A-1000-AL 42901-2 + 1.08-1.70" (27,4-43,2 mm) 1000 kcmil 20024 5516A-1000-CU 42106-1 + 1.08-1.70" (27,4-43,2 mm) 1000 kcmil 10024 *UPC begins with 54007 unless noted otherwise +UPC begins with 51128 8

3M Cold Shrink Silicone Rubber Splice QS-III Product UPC* Primary Insulation O.D. Range Conductor Size Connector 25/28kV LC, wire, tape and UniShield cables 5524A 53922-4 0.84-1.36" (21,3-34,5 mm) 1 AWG-250 kcmil (50-120 mm 2 ) None 5524A-1-AL 53923-1 0.84-1.36" (21,3-34,5 mm) 1 AWG 20004 5524A-1-CU 53924-8 0.84-1.36" (21,3-34,5 mm) 1 AWG 10004 5524A-1/0-AL 53925-5 0.84-1.36" (21,3-34,5 mm) 1/0 AWG 20005 5524A-1/0-CU 53926-2 0.84-1.36" (21,3-34,5 mm) 1/0 AWG 10005 5524A-2/0-AL 53927-9 0.84-1.36" (21,3-34,5 mm) 2/0 AWG 20006 5524A-2/0-CU 53928-6 0.84-1.36" (21,3-34,5 mm) 2/0 AWG 10006 5524A-3/0-AL 53929-3 0.84-1.36" (21,3-34,5 mm) 3/0 AWG 20007 5524A-3/0-CU 53930-9 0.84-1.36" (21,3-34,5 mm) 3/0 AWG 10007 5524A-4/0-AL 53931-6 0.84-1.36" (21,3-34,5 mm) 4/0 AWG 20008 5524A-4/0-CU 53932-3 0.84-1.36" (21,3-34,5 mm) 4/0 AWG 10008 5524A-250-AL 53933-0 0.84-1.36" (21,3-34,5 mm) 250 kcmil 20009 5524A-250-CU 53934-7 0.84-1.36" (21,3-34,5 mm) 250 kcmil 10009 5525A 42138-2 + 1.07-1.70" (27,2-43,2 mm) 250-750 kcmil (120-325 mm 2 ) None 5525A-250-AL 53845-6 1.07-1.70" (27,2-43,2 mm) 250 kcmil 20009 5525A-250-CU 53846-3 1.07-1.70" (27,2-43,2 mm) 250 kcmil 10009 5525A-350-AL 42140-5 + 1.07-1.70" (27,2-43,2 mm) 350 kcmil 20011 5525A-350-CU 42902-9 + 1.07-1.70" (27,2-43,2 mm) 350 kcmil 10011 5525A-500-AL 42141-2 + 1.07-1.70" (27,2-43,2 mm) 500 kcmil 20014 5525A-500-CU 42903-6 + 1.07-1.70" (27,2-43,2 mm) 500 kcmil 10014 5525A-750-AL 42904-3 + 1.07-1.70" (27,2-43,2 mm) 750 kcmil 20019 5525A-750-CU 42127-6 + 1.07-1.70" (27,2-43,2 mm) 750 kcmil 10019 5526A 42905-0 + 1.24-2.07" (31,5-52,6 mm) 500-1000 kcmil (240-500 mm 2 ) None 5526A-500-AL 04597-7 + 1.24-2.07" (31,5-52,6 mm) 500 kcmil 20014 5526A-500-CU 04598-4 + 1.24-2.07" (31,5-52,6 mm) 500 kcmil 10014 5526A-750-AL 04595-3 + 1.24-2.07" (31,5-52,6 mm) 750 kcmil 20019 5526A-750-CU 04596-0 + 1.24-2.07" (31,5-52,6 mm) 750 kcmil 10019 5526A-1000-AL 42906-7 + 1.24-2.07" (31,5-52,6 mm) 1000 kcmil 20024 5526A-1000-CU 42907-4 + 1.24-2.07" (31,5-52,6 mm) 1000 kcmil 10024 35kV LC, wire, tape and UniShield cables 5535A 43071-1 + 1.07-1.70" (27,2-43,2 mm) 1/0 AWG-350 kcmil (60-185 mm 2 ) None 5535A-1/0-AL 43072-8 + 1.07-1.70" (27,2-43,2 mm) 1/0 AWG 20005 5535A-1/0-CU 43077-3 + 1.07-1.70" (27,2-43,2 mm) 1/0 AWG 10005 5535A-2/0-AL 43073-5 + 1.07-1.70" (27,2-43,2 mm) 2/0 AWG 20006 5535A-2/0-CU 43078-0 + 1.07-1.70" (27,2-43,2 mm) 2/0 AWG 10006 *UPC begins with 54007 unless noted otherwise +UPC begins with 51128 9

Product UPC* Primary Insulation O.D. Range Conductor Size Connector 35kV LC, wire, tape and UniShield cables 5535A-3/0-AL 43074-2 + 1.07-1.70" (27,2-43,2 mm) 3/0 AWG 20007 5535A-3/0-CU 43079-7 + 1.07-1.70" (27,2-43,2 mm) 3/0 AWG 10007 5535A-4/0-AL 43075-9 + 1.07-1.70" (27,2-43,2 mm) 4/0 AWG 20008 5535A-4/0-CU 43080-3 + 1.07-1.70" (27,2-43,2 mm) 4/0 AWG 10008 5535A-250-AL 43076-6 + 1.07-1.70" (27,2-43,2 mm) 250 kcmil 20009 5535A-250-CU 43081-0 + 1.07-1.70" (27,2-43,2 mm) 250 kcmil 10009 5535A-350-AL 04591-5 + 1.07-1.70" (27,2-43,2 mm) 350 kcmil 20011 5535A-350-CU 04592-2 + 1.07-1.70" (27,2-43,2 mm) 350 kcmil 10011 5536A 43082-7 + 1.24-2.07" (31,5-52,6 mm) 350-1000 kcmil (185-500 mm 2 ) None 5536A-350-AL 43083-4 + 1.24-2.07" (31,5-52,6 mm) 350 kcmil 20011 5536A-350-CU 43087-2 + 1.24-2.07" (31,5-52,6 mm) 350 kcmil 10011 5536A-500-AL 43084-1 + 1.24-2.07" (31,5-52,6 mm) 500 kcmil 20014 5536A-500-CU 43088-9 + 1.24-2.07" (31,5-52,6 mm) 500 kcmil 10014 5536A-750-AL 43085-8 + 1.24-2.07" (31,5-52,6 mm) 750 kcmil 20019 5536A-750-CU 43089-6 + 1.24-2.07" (31,5-52,6 mm) 750 kcmil 10019 5536A-1000-AL 43086-5 + 1.24-2.07" (31,5-52,6 mm) 1000 kcmil 20024 5536A-1000-CU 43090-2 + 1.24-2.07" (31,5-52,6 mm) 1000 kcmil 10024 46kV LC, Wire Tape and UniShield Cables 5545A 55089-2+ 1.24-2.07" (31,5-52,6 mm) 4/0 AWG-1000 kcmil** (120-500 mm 2 **) None 3M 5500A series splice kits are for tape, wire, LC (longitudinally corrugated) shielded cables, or Unishield cables. The kits come with the splice body, a separate one-piece rejacketing tube and all components necessary to splice one cable. The kits can be ordered with or without a connector. **4/0 AWG and 250 kcmil cable may be used with aluminum connectors only do not use 4/0 AWG or 250 kcmil copper connectors. Product UPC* Primary Insulation O.D. Range Conductor Size Connector 15kV 3-Core Cables 5775A-MT 53493-9 0.64-1.01" (16,3-25,7 mm) 2-4/0 AWG (35-95 mm 2 ) None 5776A-MT 44112-0 + 0.84-1.38" (21,3-35,1 mm) 4/0 AWG-500 kcmil (95-240 mm 2 ) None 5777A-MT 44289-9 + 1.04-1.70" (26,4-43,2 mm) 350-750 kcmil (185-325 mm 2 ) None 25/28kV 3-Core Cables 5786A-MT 53937-8 0.84-1.36" (21,3-34,5 mm) 1 AWG-250 kcmil (50-120 mm 2 ) None 5787A-MT 43421-4 + 1.07-1.70" (27,2-43,2 mm) 250-750 kcmil (120-325 mm 2 ) None 5788A-MT 43422-1 + 1.24-2.07" (31,5-52,6 mm) 500-1000 kcmil (240-500 mm 2 ) None 35kV 3-Core Cables 5797A-MT 43419-1 + 1.07-1.70" (27,2-43,2 mm) 1/0 AWG-350 kcmil (60-185 mm 2 ) None 5798A-MT 43420-7 + 1.24-2.07" (31,5-52,6 mm) 350-1000 kcmil (185-500 mm 2 ) None 3M 5700A-MT series splice kits are for three-conductor cables. The kits come with three splice bodies and all components, except connectors, necessary to splice, rejacket and re-armor one cable. *UPC begins with 54007 unless noted otherwise +UPC begins with 51128 10

3M Cold Shrink Silicone Rubber Splice QS-III single-core: Installation in a few easy steps 1. Prepare cable and make connection. Position 3M Cold Shrink Silicone Rubber Splice QS-III components 2. Position splice and unwind core 3. Re-jacket Splice 4. Completed Splice 11

3M Cold Shrink Silicone Rubber Splice QS-III three-core: Installation in a few easy steps 1. Prepare cable and make connection. Position 3M Cold Shrink Silicone Rubber Splice QS-III components 2. Position splice and unwind core 3. Re-shield Splice 4. Re-jacket Splice 5. Re-jacket/Re-armor Splice 12

Caution: Working around energized systems may cause serious injury or death. Installation should be performed by personnel familiar with good safety practice in handling electrical equipment. De-energize and ground all electrical systems before installing product. 3M is a trademark of 3M. UniShield is a registered trademark of General Cable Technologies Corp. Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Electrical Markets Division 6801 River Place Blvd. Austin, TX 78726-9000 800 245 3573 FAX 800 245 0329 http://www.3m.com/electrical Please recycle. Printed in U.S.A. 3M 2009. All rights reserved. 80-6109-4334-4B