Artisan echnology Group is your source for quality new and certified-used/pre-owned equipment FAS SHIPPING AND DELIVERY ENS OF HOUSANDS OF IN-SOCK IEMS EQUIPMEN DEMOS HUNDREDS OF MANUFACURERS SUPPORED LEASING/MHLY RENALS IAR CERIFIED SECURE ASSE SOLUIS SERVICE CENER REPAIRS Experienced engineers and technicians on staff at our full-service, in-house repair center SM InstraView REMOE INSPECI Remotely inspect equipment before purchasing with our interactive website at www.instraview.com Contact us: (888) 88-SOURCE sales@artisantg.com www.artisantg.com WE BUY USED EQUIPMEN Sell your excess, underutilized, and idle used equipment We also offer credit for buy-backs and trade-ins www.artisantg.com/webuyequipment LOOKING FOR MORE INFORMAI? Visit us on the web at www.artisantg.com for more information on price quotations, drivers, technical specifications, manuals, and documentation
MAIN MENU PRODUCS APPLICAIS INDEX SELECI GUIDE Luster Recognition Sensor PI-G Series Features Detection unaffected by target color Luster differentiation capability 1-ms response speed Built-in hysteresis adjustment trimmer Detecting Distance 10 to 25 mm (0.39" to 0.98") Description Unique principle of operation Utilizing our unique optical system, PI-G sensors can provide on-line luster differentiation. Stable detection unaffected by changes in target color he PI-G Series detects a change in luster only. herefore, detection is unaffected by changes in target colors on printed mark, etc. Visible beam spot simplifies sensor adjustment Since the PI-G Series employs a visible red LED as the light source, the point of detection can be visually confirmed. his allows the sensor head to be easily aligned with a target. Hysteresis adjusting trimmer Hysteresis can be adjusted based on target surface conditions (wrinkle, etc.), oscillation or slant. -delay/-delay timer function Operating principle When light hits a surface, the amount of reflection depends on the shinyness of the surface. When the luster level is high (lustrous), the light reflects specularly. When the luster level is low (lusterless), the light reflects diffusely. By detecting this difference with a line sensor in the receiver, luster can be differentiated. High Luster level Low Sensor head Reflection status of emitted light spot Line sensor in receiver Received light output Line sensor Light source 160 Artisan echnology Group - Quality Instrumentation... Guaranteed (888) 88-SOURCE www.artisantg.com
MAIN MENU PRODUCS APPLICAIS INDEX SELECI GUIDE Applications Luster Recognition Sensor PI-G Detection of presence/absence of transparent package film Detection of transparent seal on transparent bottle Detection of presence/absence of liquid adhesive Detection of presence/absence of adhesive Specifications Model Sensor head PI-G01 Amplifier Detecting distance (standard target) Light source Detectable object Smallest detectable object Minimum spot diameter NPN PI-G70 10 to 25 mm 0.39" x 0.98" ( 30 x 30 mm 1.18" x 1.18" g lass plate, t = 1 mm 0.04") Red LED ransparent or opaque, glossy object 3 mm 0.12" dia. colorless, transparent glass plate 4 mm 0.16" ia. 1. d Hysteresis adjustment 1 -turn trimmer (240 ) Sensitivity adjustment Response time Operation mode Indicators imer 2. C ontrol output Protection circuit Power supply Current consumption Ambient light 3-turn trimmer 1 ms max. LIGH-/DARK- (switch-selectable) Output: Red LED, : Yellow LED -delay/-delay/imer- selectable (10 ms to 1 s) Non-voltage input (solid-state) adjustable by trimmer NPN: 100 ma max. (40 V max.), Residual voltage: 1V max. Reversed polarity, short-circuit protection, surge absorber 12 to 24 VDC +10% 75 ma max. Fluorescent lamp: 10000 lux max., Sunlight or incandescent lamp: 500 lux max. Ambient temperature - 10 to + 50 C Housing W eight (including 2-m 6.6' cable) Sensor head: Glass-reinforced resin, Amplifier: polycarbonate Sensor head: Approx. 97 g, 1. Visible spot diameter is 20 mm 0.79" or less at a distance of 20 mm 0.79". 2. NPN output can easily be converted to PNP output by connecting the optional OP-5148 PNP Output Converter. Amplifier: Approx. 155 g Connections Brown Yellow Purple Pink Black Red Shield 4 White 7 3 6 2 5 1 Black Pink 100 ma max. Load 12 to 24 VDC Artisan echnology Group - Quality Instrumentation... Guaranteed (888) 88-SOURCE www.artisantg.com 161
PI-G MAIN MENU PRODUCS APPLICAIS INDEX SELECI GUIDE Luster Recognition Sensor Input/Output Circuits Output circuit circuit diagram Photoelectric sensor main circuit Overcurrent protection circuit Brown Black Load 12 to 24 VDC Photoelectric sensor main circuit +5 V 1 kω 4.7 k Ω Pink NPN open-collector type output device Use an input signal of 0.3 ms or more. Use an input signal from an NPN open-collector device. Residual voltage should not exceed 1 V. Adjustment LIGH- mode (When DARK- mode is specified, refer to words in parentheses.) A SENS Mid point HYS 1. urn the hysteresis adjustment trimmer clockwise and set it to the mid-point. With a shiny object in place, turn the sensitivity adjustment trimmer clockwise until the red LED lights (turns off). Point A Optimal point A B SENS HYS 3. Set the sensitivity adjustment trimmer midway between A and B. Check sensor operation. A B SENS HYS 2. With lusterless object in place, turn the sensitivity adjustment trimmer further clockwise until the red LED lights (turns off). Point B Low High SENS HYS 4. o increase hysteresis, turn the trimmer clockwise. o decrease hysteresis, turn the trimmer counterclockwise. iming Chart When no synchronous signal is input: When synchronous signals are input: Detection signal Detection signal (imer ) (-delay timer) (-delay timer) : imer setting adjusted by trimmer (imer ) (-delay timer) (-delay timer) : imer setting adjusted by trimmer * Priority is given to synchronous input. 162 Artisan echnology Group - Quality Instrumentation... Guaranteed (888) 88-SOURCE www.artisantg.com
MAIN MENU PRODUCS APPLICAIS INDEX SELECI GUIDE Hints on Correct Use Luster Recognition Sensor PI-G Mounting sensor head Mount the sensor head, with the supplied bracket, to suit the installation site. Mounting 2 or more sensor heads in close proximity will not cause interference. When detecting traveling targets, mount the sensor head as shown right. (Pay special attention to the orientation of the sensor head and direction of the target.) Correct Incorrect KEYENCE PS-001 KEYENCE PS-001 If ambient light enters directly through the emitter/ receiver face, the PI-G may malfunction. Always mount the sensor head with this side down. When mounting the sensor head, tighten the screws with a torque of 0.5 N m or less. Wiring Do not extend the cable more than 100 m 328.1'. he sensor head cable can be extended up to 5 m 16.4'. When not using synchronous input, cut the synchronous input wire at the base. he PI-G Series requires a startup time of about 300 ms before being ready to begin operation. Dimensions CAD Sensor head PI-G01 Sensor head mounting bracket (accessory for PI-G01) Unit: mm Inch ø0.14" 2 x ø3.5 mounting hole 0.14" 3.5 1.40" 35.5 28.5 1.12" 0.79" 20 ø0.20" ø5, Cable length : 2 m 6.6' 2 slots "a" 0.14" 3.5 t=1.2 0.05" 1.12" 28.5 8 slots "b" 3.5 0.14" 1.34" 34 20.5 0.81" Detecting distance 10 to 25 0.39 to 0.98 Amplifier PI-G70 16.5 0.65" 24 10 0.39" (When detecting distance is 20 mm) 0.79" 10 0.39" 1.40" 35.5 18 0.71" Dimension of slot "a" 0.17" 4.2 10 18 0.71" 0.24" 6 0.39" 0.20" 5 0.81" 20.5 Dimension of slot "b" 1.2 0.14" 0.05" 3.6 0.81" 10 20.5 0.39" 46.5 1.83" 28.5 1.12" 1.69" 43 34 1.34" 2 x ø5 ø0.20" mounting hole 3.78" 96 105 4.13" ø0.16" ø4, 5.4 x 0.18 mm 2 core Cable length: 2 m 6.6' 9.5 0.37" 22 (When dust cover is removed) 0.87" 0.28" 7 Supplied screws M3 x 23: 2 35.1 1.38" 2 x M3 screw (for mounting) t=2 0.05" 1.54" 39 5 0.20" 22.5 0.89" 1.39" 35.4 3.54" 90 8 0.31" Artisan echnology Group - Quality Instrumentation... Guaranteed (888) 88-SOURCE www.artisantg.com 163
Artisan echnology Group is your source for quality new and certified-used/pre-owned equipment FAS SHIPPING AND DELIVERY ENS OF HOUSANDS OF IN-SOCK IEMS EQUIPMEN DEMOS HUNDREDS OF MANUFACURERS SUPPORED LEASING/MHLY RENALS IAR CERIFIED SECURE ASSE SOLUIS SERVICE CENER REPAIRS Experienced engineers and technicians on staff at our full-service, in-house repair center SM InstraView REMOE INSPECI Remotely inspect equipment before purchasing with our interactive website at www.instraview.com Contact us: (888) 88-SOURCE sales@artisantg.com www.artisantg.com WE BUY USED EQUIPMEN Sell your excess, underutilized, and idle used equipment We also offer credit for buy-backs and trade-ins www.artisantg.com/webuyequipment LOOKING FOR MORE INFORMAI? Visit us on the web at www.artisantg.com for more information on price quotations, drivers, technical specifications, manuals, and documentation