MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment. High surge 2,500 V minimum of surge strength (Bellcore standard), and 1,500 VAC minimum of dielectric strength between coil and contact (-15, -16 type). Low power consumption 85 mw of operate power (150 mw of nominal power consumption) by built-in permanent magnet. Shipping tube package ORDERING INFORMATION [Example] FBR46 N D 012 -P -15 -CSA (a) (b) ( * ) (c) (d) (e) (f) (a) Series Name FBR46 : FBR46 Series (b) Enclosure N : Plastic sealed (*) Coil Type D : Standard, -15, -16 (DC coil) G : 65% Operate type L1 : Single winding latching type L2 : Double winding latching type (refer to the SPECIFICATIONS) (c) Voltage (Example) Standard, -15, -16 type (Example) Latching type 005: 5 VDC 05: 5 VDC 012: 12 VDC 12: 12 VDC (refer to the COIL DATA CHART) (d) Contact Material P : Gold-overlay silver-palladium (e) Dielectric Strength Nil : Between coil and contacts 1,000 VAC, between contacts 750 VAC -15 : Between coil and contacts 1,500 VAC, between contacts 750 VAC -16 : Between coil and contacts 1,500 VAC, between contacts 1,000 VAC (f) Safety Specification Nil : Standard (UL114 recognized) -CSA : UL114 + CSA recognized Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR46ND012-P Stamp: 46ND012-P 1
SAFETY STANDARD AND FILE NUMBERS UL114 (File No. E63615) C22.2 No. 14 (File No. LR40304 or LR64026) 1 A 30 VDC resistive 1.5 to 24 VDC 0.5 A 120 VAC resistive * Excluding latching type FBR46L Contact rating SPECIFICATIONS Item D type, G type -15 type -16 type Latching Contact Arrangement and Style 2 form C (DPDT), bifurcated Material Resistance (initial) Ratings (resistive) Maximum Carrying Current Maximum Switching Power Max. Switching Voltage* 1 Maximum Switching Current Minimum Switching load* 2 Electrostatic Capacity (reference) Gold-overlay silver-palladium Maximum mω (at 0.1 A 6 VDC) 0.5 A 120 VAC or 1 A 30 VDC 1.25 A 60 AV or 30 W 125 V 1 A Coil power (at 20 C) 0.15 to 0.2 W 0.25 W 0.01 ma 10 mvdc (reference) Operate power (at 20 C) 0.085 to 0.112 0.106 W maximum Operating Temperature Operating Humidity Approximately 2 pf (between coil and contacts) Approximately 1 pf (between open contacts) 0.2 to 0.25 W 0.2 W 0.112 to 0.14 W maximum 0.128 W maximum 30 C to +70 C (no frost) (refer to the CHARACTERISTIC DATA) 45 to 85%RH Time Value Operate (at nominal ) Maximum 5 ms Release (at nominal ) Maximum 2 ms Insulation Resistance (initial) Minimum 0 MΩ (at 500 VDC) Dielectric between coil and contacts 1,000 VAC 1,500 VAC 1,000 VAC Strength between adjacent contacts (for 1 minute) between open contacts 750 VAC 1,000 VAC 750 VAC Surge Strength between set-reset-coil 250 VAC between coil and contacts between adjacent contacts 2,500 V 1,500 V (at 10 700 µs) 2,500 V (at 2 10 µs) 1,250 V 1,500 V (at 10 700µs) 2 µs 10 µs between open contacts 1,500 V(at 10 700 µs) 1,500 V 750 V 10 µs 700 µs Continued 2
Item D type, G type -15 type -16 type Latching Life Mechanical 50 10 6 operations minimum Electrical (refer to the DC 2 10 5 operations minimum (at contact rating) REFERENCE DATA) AC 1 10 5 operations minimum (at contact rating) Other Vibration Resistance 10 to 55 Hz (double amplitude of 1.5 mm) Shock Misoperation 500 m/s 2 (11 ± 1 ms) Resistance Endurance 1,000 m/s 2 (11 ± 1 ms) Weight Approximately 2.5 g * 1 If the switching exceeds the rated contact, reduce the current. The current values vary according to the type of load. * 2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. COIL DATA CHART 1. STANDARD (D type) Coil Operate MODEL resistance (at nominal operate release temperature (±10%) ) * 1 * 1 power power rise approx. FBR46ND003-P 3 VDC 60 Ω 50 ma FBR46ND005-P 5 VDC 167 Ω 30 ma FBR46ND006-P 6 VDC 240 Ω 25 ma FBR46ND009-P 9 VDC 540 Ω 17 ma FBR46ND012-P 12 VDC 960 Ω 13 ma 75% max. 5% min. Approx. Approx. Approx. of nominal of nominal 150 mw 85 mw 25 deg (at nominal max. (at nominal ) FBR46ND024-P 24 VDC 2,8 Ω 8 ma 200 mw 112 mw 30 deg *1: Specified values are subject to pulse wave. Note: All values in the table are measured at 20 C 2. 65% OPERATE TYPE (G type) Coil Operate MODEL resistance (at nominal operate release temperature (±10%) ) * 1 * 1 power power rise approx. FBR46NG003-P 3 VDC 36 Ω 83 ma FBR46NG005-P 4.5 VDC 81 Ω 56 ma FBR46NG006-P 6 VDC 144 Ω 41 ma FBR46NG009-P 9 VDC 324 Ω 27 ma FBR46NG012-P 12 VDC 576 Ω 20 ma FBR46NG024-P 24 VDC 2,304 Ω 10 ma *1: Specified values are subject to pulse wave. Note: All values in the table are measured at 20 C 65% max. 10% min. Approx. Approx. Approx. of nominal of nominal 250 mw 106 mw 35 deg (at nominal max. (at nominal ) 3
3. HIGH DIELECTRIC STRENGTH TYPE (-15, -16 type) MODEL Operate Coil resistance (at nominal operate release temperature (±10%) ) * 1 * 1 power power rise -15 type -16 type approx. FBR46ND003-P-15 FBR46ND003-P-16 3 VDC 45 Ω 67 ma FBR46ND005-P-15 FBR46ND005-P-16 5 VDC 125 Ω 40 ma FBR46ND006-P-15 FBR46ND006-P-16 6 VDC 1 Ω 33 ma FBR46ND009-P-15 FBR46ND009-P-16 9 VDC 405 Ω 22 ma FBR46ND012-P-15 FBR46ND012-P-16 12 VDC 720 Ω 17 ma 75% max. 5% min. Approx. Approx. Approx. of of 200 mw 112 mw 30 deg nominal nominal (at nominal max. (at nominal ) ) FBR46ND024-P-15 FBR46ND024-P-16 24 VDC 2,304 Ω 10 ma 250 mw 140 mw 35 deg *1: Specified values are subject to pulse wave. Note: All values in the table are measured at 20 C. 4. LATCHING TYPE (L1, L2 type) MODEL Operate resistance (at nominal operate release Single winding Double winding (±10%) ) * 1 * 1 power power latching type latching type approx. FBR46NL103-P FBR46NL203-P 3 VDC 45 Ω 67 ma FBR46NL105-P FBR46NL205-P 5 VDC 125 Ω 40 ma FBR46NL106-P FBR46NL206-P 6 VDC 1 Ω 33 ma FBR46NL109-P FBR46NL209-P 9 VDC 405 Ω 22 ma FBR46NL112-P FBR46NL212-P 12 VDC 720 Ω 17 ma *1: Specified values are subject to pulse wave. Note: All values in the table are measured at 20 C. % max. % max. Approx. Approx. of nominal of nominal 200 mw 128 mw (at nominal max. ) 4
CHARACTERISTIC DATA multiplying factor (%) Range of operation temperature and [D type] 160 150 140 130 120 110 90 70 Operating range Must operate (Data) assumes that the maximum allowable temperature of E type insulation coil is 115 C Maximum allowable coil multiplying factor (%) Range of operation temperature and [G type] 160 150 140 130 120 110 90 70 Operating range (Data) assumes that the maximum allowable temperature of E type insulation coil is 115 C Maximum allowable coil Must operate Range of operation temperature and [ 15, 16 type] multiplying factor (%) 160 150 140 130 120 110 90 70 Operating range Must operate (Data) assumes that the maximum allowable temperature of E type insulation coil is 115 C Maximum allowable coil 10 0 10 20 30 40 50 60 70 Operating temperature ( C) 10 0 10 20 30 40 50 60 70 Operating temperature ( C) 10 0 10 20 30 40 50 60 70 Operating temperature ( C) Contact load current (A) 1.0 0.5 0.3 0.1 Maximum switching capacity ➁ ➀AC resistive load ( AC contact rating) ➁DC resistive load ( DC contact rating) ➀ Service life (operations) ( 10 4 ) 500 50 10 5 1 Life curve 30 V DC resistive load 120 V AC resistive load 10 20 30 50 120 200 Contact load (V) 0.5 1.0 1.5 2.0 Contact load current (A) REFERENCE DATA Distribution (%) Distribution of operate and release Operate Release 60 40 20 Distribution (%) Distribution of operate and release time Operate Release 60 40 20 Distribution (%) Distribution of contact resistance 60 40 20 0 0 10 20 30 40 50 60 70 Rated coil multiplying factor (%) 0 0 1 2 3 4 5 6 7 8 Time (ms) 0 0 10 20 30 40 50 60 70 Contact resistance (mω) 5
DIMENSIONS Dimensions 15.9 +0.1 9.8 +0.1 Schematics (BOTTOM VIEW) PC board mounting hole layout (BOTTOM VIEW) 7.9 +0.1 1 3 5 6 12 10 8 7 7.62 3.5 (1.0) 5.08 5.08 (1.09) 7.62 Polarity 5.08 8 ø0.8 5.08 2.54.54 Tube carrier 12.8 max. 501 maximum 15.8 maximum Dimensions (Latching type) 15.9 +0.1 9.8 +0.1 Schematics (BOTTOM VIEW) ( ) 2.54 PC board mounting hole layout (BOTTOM VIEW) 7.9 +0.1 1 2 3 5 6 7.62 3.5 2.54 (1.0) 5.08 5.08 (1.09) 7.62 12 11 ( ) 10 8 7 5.08 5.08 2.54 10 ø0.8 2.54 polarity Tube carrier Note: No 2, 11 terminals are for double winding latching type only. ( ) ( ) are reset polarity for single winding latching type. The terminal number is not shown on the relay. 12.8 max. 501 maximum 15.8 maximum Unit: mm 6
Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com 2003 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 02/12/2003 7