NATIONAL LAW UNIVERSITY DELHI SECTOR-14, DWARKA NEW DELHI-110078 SHORT TENDER NOTICE FOR SUPPLY AND INSTALLATION OF MODULAR FURNITURE 1. Date of Invitation of quotations : 05 th October, 2018 2. Last date of submission : 15 th October, 2018 at 1.00 P M 3. Date of opening : 15 th October, 2018, at 3.00 PM National Law University Delhi invites sealed item rates quotations from competent vendor for supply and installation of modular furniture. The quotation is required to be submitted in a sealed cover to the Registrar, National Law University Delhi, Sector 14, Dwarka, New Delhi - 110078 on the attached format, so as to reach the University on or before 15 th October, 2018 at 1.00 P M, duly superscripting the quotation for supply and installation of modular furniture. on the top of sealed envelope. Scope of work: supply and installation of modular furniture SCHEDULE OF QUANTITIES S. No. Description of Stores Qty. (Approx) 1 MODULAR TABLE 14 Providing and fixing of Factory made Modular Tables with work top made of 25 mm thickness Flat single layer MDF Board of Grade SBG II of IS 12406/2003.Two long sides shall have post form half round profile laminate in approved colour. Rest two plain sides shall have edge banded with PVC tape of 2mm thick of repute make with the help of hot melt glue. Top shall be fixed with gable end and modesty panel using mini fix and wooden dowel by using (knock down) system fpr interconnecting as shown in the reference dowel can be modified. Gable end modesty are to be made of 18 mm thickness flat single layer pre laminated MDF Board. App plain sides of the gable end and modesty panel shall be edge banded with 0.8-1.0mm thick PVC Per Unit Rate Taxes Total Amount
tape with help of hot melt glue. 04 numbers buffers to be provided at the bottom and as per general technical requirements. Size of the table 1200X600X750MM Table may consider only reducing length and modesty pannel size will change. Color shade as per University choice. One Cable manager with ABS cover is to be provided. 2 PEDESTAL UNIT 18 nos. The complete body, fascia and drawers sides of drawer pedestal unit of size 450(width)x500 (Depthx700 (Height) mm shall be made of MDF board of 18 mm thickness one side lanimate, except pedestal back, and drawer bottom will be made of 8 mm thick MDF board. Having 2 nos. of drawer of equal size at top & I nos. filling drawer at bottom. Top sides bottom shall be fix by using mini fix and wooden dowel in (Knock down) system for interconnecting. All plain panels shall be edge banned with 0.8-1.0 mm thick PVC tape with the help of hot melt glue. Sides wall having recess grove to accommodate 8 mm thickness MDF Board panel with balancing laminate on both face. All drawers shall run on telescopic channel of 400 mm length with average weight of 0.6 kg per set) (approx,) having average thickness of 1 mm steel member of channel. Open table shutter will hung on side of the drawer. Independent lock will be provided for pedestal units. 04 number buffers to be provided at the bottom and as per general technical requirement. All edges of board shall be sealed with 2mm thick machine pressed PVC lipping of matching shade. 3 BACK SIDE STORAGE UNIT 10 nos. Back Side storage unit having MDF construction: Providing and fixing of modular side storage unit with top made of 25 mm thickness flat single layer MDF board of Grade II.Front side of Top shall have post form half round profile of laminate.rest plain sides shall have edge banded with PVC tape of 2mm thick of reputed make with the help of hot melt glue. Side wall (Gable End)
having a recess groove to accommodate 8 mm MDF board panel. Top shall be fixed with dies and bottom skirting. Lock is to be provided in the centre to locking doors together. A skirting 75 mm shall be provided. Depth & height of unit shall be 450mm & 714mm respectively. Size : 1200x450x750mm 4 OVERHEAD STORAGE UNIT WITHOUT SHUTTER Specifications same as above Size: 900x400x600mm 25 nos. 1200x400x600mm 6 nos. 5 MODULAR PARTITION 155 sqft. Modular partition frame shall be made of 1.5 mm thickness CRC Sheet, with horizontal member 1mm thick. The raceway plate of partition shall be made of.9mm thick CRC Sheet. Overall Thickness of partition frame shall be 65 mm thick with 2 raceway plate one at skirting level 2 nd above or below worktop. It shall consist of 12mm thick particle board on both side in approved Shade. Fabric panel shall have 0.6mm sheet with.10 mm soft board. Upholster with superior Quality fabric of approved shade. Top and End trim of partition fame shall be made of 1.6mm Aluminimum section duly powder coated The steel should be manufactured by SAIL/TISCO/Jindal/RIN Ltd/ESSAR STEEL. Height & thickness of partitions 1200x60mm (pantry and workstations) 6 WORK TOP 4 nos. 25mm thick MDF board finished with 0.6mm thick post formed lamination on exposed surface & balancing white laminate on inner surface. Front edge of top shall be in half round shape to match the table, other edges shall be finished with 2mm thick machine pressed PVC lipping of matching shade. Size : 1200x600mm 7 GABLE END 4 nos.
25mm thick MDF board in one piece with front edge in half round post formed mould with leveling bolts which allow 25mm adjustment, finished with 0.6mm thick laminate. All the edges finished with 2mm thick PVC hot pressed lipping of matching color. Size : 575x725mm 8 GLASS 6 nos. 6mm thick glass with approved itching work to fix in the top of tables and workstation fitted with heavy bracket 9 SOFT BOARD WITH FABRIC 310 sqft. Providing fabric panel in lieu of pre laminated particle board panels in partitions. The tackable tile shall be made up of 6mm thick cross lone foam having density 50-60 kg/cum. The area of actual fabric panel shall be measured for payment. (Soft board shall be provided between back unit and overhead storage) 10 KEYBOARD TRAY 18 nos. Size :580x380mm with sliding channel on both sides and inbuilt sliding Mouse pad tray 11 CPU TROLLEY 18 nos. Supplying and placing in position below table & workstation movable type MS Powder coated CPU Trolley of size 230x270x150mm for placing any size of CPU Unit, made out of ms Sheet with 4 nos. of Lockable type castors. Terms and Conditions: 1) An EMD of Rs. 10,000/- is to be submitted along with the quotation 2) The agency is required to submit its bids /quotations on their letterhead. 3) Copy of PAN Card is to be enclosed. 4) Copy of GST Registration Certificates is to be enclosed. 5) Registration certificate as per existing norms (indicating the legal statuscompany/partnership firm/proprietorship concern, etc.) to be enclosed. 6) In case goods is not according to specifications order will be cancelled. 7) The University is not bound to accept the lowest bid. sd Registrar
Annexure I FINANCIAL BID To The Registrar National Law University, Delhi Sector-14, Dwarka New Delhi-110078 Subject: Supply and installation of modular furniture. Sir, I/we have gone through the tender document, understood it fully and declare that I/we shall abide by the terms and conditions mentioned therein for supply of the items required. SCHEDULE OF QUANTITIES S. No. Description of Stores Qty. (Approx) 1 MODULAR TABLE 14 Providing and fixing of Factory made Modular Tables with work top made of 25 mm thickness Flat single layer MDF Board of Grade SBG II of IS 12406/2003.Two long sides shall have post form half round profile laminate in approved colour. Rest two plain sides shall have edge banded with PVC tape of 2mm thick of repute make with the help of hot melt glue. Top shall be fixed with gable end and modesty panel using mini fix and wooden dowel by using (knock down) system fpr interconnecting as shown in the reference dowel can be modified. Gable end modesty are to be made of 18 mm thickness flat single layer pre laminated MDF Board. App plain sides of the gable end and modesty panel shall be edge banded with 0.8-1.0mm thick PVC tape with help of hot melt glue. 04 numbers buffers to be provided at the bottom and as per general technical requirements. Size of the table 1200X600X750MM Table may consider only reducing length and modesty pannel size will change. Color shade as per Per Unit Rate Taxes TOTAL Amount
University choice. One Cable manager with ABS cover is to be provided. 2 PEDESTAL UNIT 18 nos. The complete body, fascia and drawers sides of drawer pedestal unit of size 450(width)x500 (Depthx700 (Height) mm shall be made of MDF board of 18 mm thickness one side lanimate, except pedestal back, and drawer bottom will be made of 8 mm thick MDF board. Having 2 nos. of drawer of equal size at top & I nos. filling drawer at bottom. Top sides bottom shall be fix by using mini fix and wooden dowel in (Knock down) system for interconnecting. All plain panels shall be edge banned with 0.8-1.0 mm thick PVC tape with the help of hot melt glue. Sides wall having recess grove to accommodate 8 mm thickness MDF Board panel with balancing laminate on both face. All drawers shall run on telescopic channel of 400 mm length with average weight of 0.6 kg per set) (approx,) having average thickness of 1 mm steel member of channel. Open table shutter will hung on side of the drawer. Independent lock will be provided for pedestal units. 04 number buffers to be provided at the bottom and as per general technical requirement. All edges of board shall be sealed with 2mm thick machine pressed PVC lipping of matching shade. 3 BACK SIDE STORAGE UNIT 10 nos. Back Side storage unit having MDF construction: Providing and fixing of modular side storage unit with top made of 25 mm thickness flat single layer MDF board of Grade II.Front side of Top shall have post form half round profile of laminate.rest plain sides shall have edge banded with PVC tape of 2mm thick of reputed make with the help of hot melt glue. Side wall (Gable End) having a recess groove to accommodate 8 mm MDF board panel. Top shall be fixed with dies and bottom skirting. Lock is to be provided in the centre to locking doors together. A skirting 75 mm shall be provided. Depth & height of unit shall be 450mm &
714mm respectively. Size : 1200x450x750mm 4 OVERHEAD STORAGE UNIT WITHOUT SHUTTER Specifications same as above Size: 900x400x600mm 25 nos. 1200x400x600mm 6 nos. 5 MODULAR PARTITION 155 sqft. Modular partition frame shall be made of 1.5 mm thickness CRC Sheet, with horizontal member 1mm thick. The raceway plate of partition shall be made of.9mm thick CRC Sheet. Overall Thickness of partition frame shall be 65 mm thick with 2 raceway plate one at skirting level 2 nd above or below worktop. It shall consist of 12mm thick particle board on both side in approved Shade. Fabric panel shall have 0.6mm sheet with.10 mm soft board. Upholster with superior Quality fabric of approved shade. Top and End trim of partition fame shall be made of 1.6mm Aluminimum section duly powder coated The steel should be manufactured by SAIL/TISCO/Jindal/RIN Ltd/ESSAR STEEL. Height & thickness of partitions 1200x60mm (pantry and workstations) 6 WORK TOP 4 nos. 25mm thick MDF board finished with 0.6mm thick post formed lamination on exposed surface & balancing white laminate on inner surface. Front edge of top shall be in half round shape to match the table, other edges shall be finished with 2mm thick machine pressed PVC lipping of matching shade. Size : 1200x600mm 7 GABLE END 4 nos. 25mm thick MDF board in one piece with front edge in half round post formed mould with leveling bolts which allow 25mm adjustment, finished with 0.6mm thick laminate. All the edges finished with 2mm thick PVC hot pressed lipping of matching color.
Size : 575x725mm 8 GLASS 6 nos. 6mm thick glass with approved itching work to fix in the top of tables and workstation fitted with heavy bracket 9 SOFT BOARD WITH FABRIC 310 sqft. Providing fabric panel in lieu of pre laminated particle board panels in partitions. The tackable tile shall be made up of 6mm thick cross lone foam having density 50-60 kg/cum. The area of actual fabric panel shall be measured for payment. (Soft board shall be provided between back unit and overhead storage) 10 KEYBOARD TRAY 18 nos. Size :580x380mm with sliding channel on both sides and inbuilt sliding Mouse pad tray 11 CPU TROLLEY 18 nos. Supplying and placing in position below table & workstation movable type MS Powder coated CPU Trolley of size 230x270x150mm for placing any size of CPU Unit, made out of ms Sheet with 4 nos. of Lockable type castors. I/we certify that have seen installation & renovation of modular furniture in NLU Delhi and information furnished above is true and correct. All the terms and Conditions are acceptable to us. Documents Attached: 1) Copy of PAN Card 2) Copy of GST Registration Certificates 3) Registration certificate as per existing norms (indicating the legal statuscompany/partnership firm/proprietorship concern, etc.) (Authorized Signature) Name of the Authorized person: Name of the Company: Address of the Company: Contact No: