MODUL-iT ABS modules 60x40

MODUL-iT ABS modules 60x40

MODUL-iT ISO modules and accessories make things talk to each other The modules are the heart of the MODUL-iT system. All modules have 60x40 cm outer dimensions. They are interchangeable between all cabinets, racks and carts of the MODUL-iT system. Within the range of modules, one can choose between trays and baskets, made in light grey or transparent ABS. The trays are available in 5, 10 and 20 cm deep; the baskets in depths of 10 and 20 cm. All modules are stackable and can be divided in both directions with light grey or transparent dividers. These dividers can be placed and fastened easily into the MODUL-iT modules without any extra tools, making use of a unique dovetail joint. The dividers can also be shortened at choice to create compartments of varying dimensions within the modules. The shortened dividers are connected to each other with T-pieces. All trays and baskets can be equipped with a safety stop, so they can be used as drawers inside the different storage and transport elements. Label holders can be put on the dividers or on the outside of the modules. Alphanumeric characters are placed on the upper side of the bearing edge of the modules to indicate in a simple way the XY-coordinates of the different compartments. Medicines, IV bags, nursing disposables and other materials, all can be stored in a very efficient and clear way, using MODUL-iT modules and its accessories. The modularity of the MODUL-iT system always offers the most flexible, space-saving and ergonomic solution! Made in Belgium

MODUL-iT Tray 60x40x5 cm Light grey Article no: 106405-10100 MODUL-iT tray (ISO) in ABS, light grey, injection molded. Can be stacked, nested and divided in both directions. Dim. 60x40x5 cm (LxWxH) MODUL-iT Tray 60x40x10 cm Light grey Article no: 106410-10100 MODUL-iT tray (ISO) in ABS, light grey, injection molded. Can be stacked, nested and divided in both directions. Dim. 60x40x10 cm (LxWxH) MODUL-iT Tray 60x40x20 cm Light grey Article no: 106420-10100 MODUL-iT tray (ISO) in ABS, light grey, injection molded. Can be stacked, nested and divided in both directions. Dim. 60x40x20 cm (LxWxH) MODUL-iT Tray 60x40x5 cm Transparent Article no: 106405-10101 MODUL-iT tray (ISO) in transparent ABS, injection molded. Can be stacked, nested and divided in both directions. Dim. 60x40x5 cm (LxWxH)

MODUL-iT Tray 60x40x10 cm Transparent Article no: 106410-10101 MODUL-iT tray (ISO) in transparent ABS, injection molded. Can be stacked, nested and divided in both directions. Dim. 60x40x10 cm (LxWxH) MODUL-iT Tray 60x40x20 cm Transparent Article no: 106420-10101 MODUL-iT tray (ISO) in transparent ABS, injection molded. Can be stacked, nested and divided in both directions. Dim. 60x40x20 cm (LxWxH) MODUL-iT Basket 60x40x10 cm Light grey Article no: 116410-10100 MODUL-iT basket (ISO) in ABS, light grey, injection molded. Can be stacked, nested and divided in both directions. Dim. 60x40x10 cm (LxWxH) MODUL-iT Basket 60x40x20 cm Light grey Article no: 116420-10100 MODUL-iT basket (ISO) in ABS, light grey, injection molded. Can be stacked, nested and divided in both directions. Dim. 60x40x20 cm (LxWxH)

MODUL-iT Basket 60x40x10 cm Transparent Article no: 116410-10101 MODUL-iT basket (ISO) in transparent ABS, injection molded. Can be stacked, nested and divided in both directions. Dim. 60x40x10 cm (LxWxH) MODUL-iT Basket 60x40x20 cm Transparent Article no: 116420-10101 MODUL-iT basket (ISO) in transparent ABS, injection molded. Can be stacked, nested and divided in both directions. Dim. 60x40x20 cm (LxWxH) MODUL-iT Divider 40x5 cm Light grey Article no: 124005-11100 MODUL-iT divider (ISO) for modules of 5 cm high, injection molded plastic, light grey, to be used crosswise. Can be shortened at choice. Dim. 40x5 cm(lxh) MODUL-iT Divider 60x5 cm Light grey Article no: 126005-11100 MODUL-iT divider (ISO) for modules of 5 cm high, injection molded plastic, light grey, to be used crosswise. Can be shortened at choice. Dim. 60x5 cm(lxh)

MODUL-iT Divider 40x5 cm Transparent Article no: 124005-10101 MODUL-iT divider (ISO) for modules of 5 cm high, injection molded plastic, transparent, to be used crosswise. Can be shortened at choice. Dim. 40x5 cm (LxH) MODUL-iT Divider 60x5 cm Transparent Article no: 126005-10101 MODUL-iT divider (ISO) for modules of 5 cm high, injection molded plastic, transparent, to be used crosswise. Can be shortened at choice. Dim. 60x5 cm (LxH) MODUL-iT Divider 40x10 cm Light grey Article no: 124010-11100 MODUL-iT divider (ISO) for modules of 10 cm high, injection molded plastic, light grey, to be used crosswise. Can be shortened at choice. Dim. 40x10 cm (LxH) MODUL-iT Divider 60x10 cm Light grey Article no: 126010-11100 MODUL-iT divider (ISO) for modules of 10 cm high, injection molded plastic, light grey, to be used crosswise. Can be shortened at choice. Dim. 60x10 cm (LxH)

MODUL-iT Divider 40x10 cm Transparent Article no: 124010-10101 MODUL-iT divider (ISO) for modules of 10 cm high, injection molded plastic, transparent, to be used crosswise. Can be shortened at choice. Dim. 40x10 cm (LxH) MODUL-iT Divider 60x10 cm Transparent Article no: 126010-10101 MODUL-iT divider (ISO) for modules of 10 cm high, injection molded plastic, transparent, to be used crosswise. Can be shortened at choice. Dim. 60x10 cm (LxH) MODUL-iT Divider 40x20 cm Light grey Article no: 124020-11100 MODUL-iT divider (ISO) for modules of 20 cm high, injection molded plastic, light grey, to be used crosswise. Can be shortened at choice. Dim. 40x20 cm (LxH) MODUL-iT Divider 60x20 cm Light grey Article no: 126020-11100 MODUL-iT divider (ISO) for modules of 20 cm high, injection molded plastic, light grey, to be used crosswise. Can be shortened at choice. Dim. 60x20 cm (LxH)

MODUL-iT Divider 40x20 cm Transparent Article no: 124020-10101 MODUL-iT divider (ISO) for modules of 20 cm high, injection molded plastic, transparent, to be used crosswise. Can be shortened at choice. Dim. 40x20 cm (LxH) MODUL-iT Divider 60x20 cm Transparent Article no: 126020-10101 MODUL-iT divider (ISO) for modules of 20 cm high, injection molded plastic, transparent, to be used crosswise. Can be shortened at choice. Dim. 60x20 cm (LxH) Why our choice for transparent ABS and not polycarbonate or PMMA

MODUL-iT Stop system for modules Light grey Article no: 121000-12102 MODUL-iT stop system for trays and baskets, injection molded plastic, light grey. Can be fixed to every corner of the module. MODUL-iT Label holder portrait White Article no: 121001-12102 MODULiT double label holder portrait for 2 cards, injection molded plastic, white. To be attached to trays, baskets and dividers. Dim. 62x42 mm (HxW)

MODUL-iT Label holder landscape White Article no: 121006-12102 MODUL-iT double label holder landscape for 2 cards, injection molded plastic, white. To be attached to trays, baskets and dividers. Dim. 42x62 mm (HxW) MODUL-iT Plastic card for label White Article no: 121002-16122 MODUL-iT card to which the label is applied, plastic, white. Can be inserted into the double label holders type 121001-12102 and 121006-12102. Dim. 59x39 mm (HxW) MODUL-iT Label holder credit card White Article no: 121007-12102 MODUL-iT double label holder credit card for 2 cards, injection molded plastic, white. To be attached to trays, baskets and dividers. Dim. 59x90 mm (HxW) MODUL-iT Plastic credit card for label White Article no: 920009-00005 MODUL-iT card, type credit card, to which the label is applied, plastic, white. Can be inserted into the double label holder type credit card. Dim. 54x86 mm (HxW)

MODUL-iT plastic portrait and landscape cards Different colours Art.nr. 920009-00000 = Red Art.nr. 920009-00001 = Blue Art.nr. 920009-00002 = Yellow Art.nr. 920009-00003 = Green Art.nr. 920009-00004 = Orange Art.nr. 920009-00014 = Grey Art.nr. 920009-00015 = Black MODUL-iT plastic credit cards Different colours Art.nr. 920009-00006 = Red Art.nr. 920009-00007 = Blue Art.nr. 920009-00008 = Yellow Art.nr. 920009-00009 = Green Art.nr. 920009-00010 = Orange MODUL-iT shieldings card for RFID-TAG Article no: 121009-00001 MODUL-iT shieldings card in aluminium, 1 mm thickness, to be used with the i-room stock management system. Dim. 59x39 mm (HxW) MODUL-iT plastic card with no entry sign Article no: 920009-00012 MODUL-iT plastic card with no entry sign, to be used in label holders 121001-12102 and 121006-12102. Dim. 59x39 mm (HxW)

MODUL-iT plastic stock card Article no: 920009-00011 MODUL-iT plastic stock card with red & white framework, to be used with the label holder 121001-12102 and 121006-12102. Dim. 59x39 mm MODUL-iT RFID KanBan label holder Article no: 600000-00007 MODUL-iT RFID KanBan label holder to be used with the i-room stock management system. Dim. 90x59 mm (HxW) MODUL-iT din-a4 magnetic document holder Different colours MODUL-iT din-a4 document holder, self adhesive backside with magnetic front. Available in different colours. Black = Art.nr. 920013-50005 Grey = Art.nr. 920013-50006 MODUL-iT din-a4 document holder Transparent plastic Article no: 920013-50004 MODUL-iT din-a4 document holder in transparent plastic, with two self adhesive tape strips on the backside.

MODUL-iT order rail for plastic cards with barcodes Article no: 121008-16131 MODUL-iT order rail for plastic cards with barcodes, backside in white self adhesive plastic, frontside in transparent plastic. Includes nail grip. Dim. 40 cm (L) MODUL-iT order rail for label holders Article no: 920013-00005 MODUL-iT self adhesive order rail for label holders, in white plastic. Dim. 40 cm (L) MODUL-iT T-connector for dividers Article no: 121005-12102 MODUL-iT T-connector to link two shortened dividers, in flexible white plastic. MODUL-iT board in plastic to clip label holders Article no: 920001-00017 MODUL-iT board in plastic, with 8 rails of 75 cm to clip label holder type 121001-12102, 121006-12102, 121007-12102 and 600000-00007. Dim. 75x65 cm (LxH)

MODUL-iT shelf in HPL 30x40 cm Article no: 133406-71710 Modul-iT shelf made in High Pressure Laminate (HPL), thickness 6 mm. Dim. 30x40x0,6 cm (LxWxH) MODUL-iT shelf in HPL 60x40 cm Article no: 136406-71710 Modul-iT shelf made in High Pressure Laminate (HPL), thickness 6 mm. Dim. 60x40x0,6 cm (LxWxH) MODUL-iT cover in PC 60x40 cm Article no: 920001-00009 MODUL-iT cover in polycarbonate for (ISO) trays, transparent, thickness 5 mm. Dim. 60x40x0,5 cm (LxWxH) MODUL-iT cover for poison drawer with key or code lock MODUL-iT cover for poison drawer, made in epoxy coated steel, to be inserted in cabinets with MODUL-iT liners. With key lock or code lock. Dim. 60x40x4 cm (LxWxH) With key lock = Article no: 136406-50500 With code lock = Article no: 136406-50501